CONSTRUCTION OF CANTEEN

Amount

Taking down C.A. Or G.C.I sheet in roof with ridges including stacking the serviceable materials within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/|..

Dismantling pucca brick or lime work including staking of serviceable materials in countale stacks within 15 M lead and disposal of unserviceable materials with all leads all complete as per direction of E/|..

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M. including all lifts, levelling, ramming the foundation trenches removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I. Extra for earthwork in hard soil as per specification & direction of E/I.(vide classification of soil item-B)

Filling in foundation trenches and plinth in layers not exceeding 150- Thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation- Trenches within a lead of 50m and lift of 1-5m all complete as per building specification and direction of E/I (mode of measurement compacted volume).

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, Labour, royalty and taxes all complete as per building specification and direction of E/I (mode of measurement competed volume).

Providing designation 75B one brick flat soling joint filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I-

Providing and laying in position cement concrete of specified grade (1:2:4) with stone aggregate of 20 mm nominal size excluding the cost of centering and shuttering …do…. All work upto plinth level:

Providing and laying in position specified grade of reinforced cement concrete of specified grade (1:1.5:3) with stone aggregate of 20 mm nominal size excluding the cost of centering and shuttering …do…. All work upto plinth level:

Providing designation 75A brick work in C M (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to 2.5 including providing 10mm thick mortar , cost of screening materials raking out joints of 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I

Providing and laying 50 mm thick damp proof course with cement concrete M20 with nominal mix of (1:2:4) with approved quality of stone chips of 20mm to 6mm six graded and clean coarse sand of F.M.2.5 to 3 including screening shuttering and mixing cement concrete in mixer with 5% cico or any other approved water proofing compound and placing in position , striking curing, taxes and royalty all complete ,as per building specification and direction of E/I.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, butteress, plinth and string courses, fillets, columns,pillars, abutment, posts and struts etc. above plinth level upto floor five level, excluding the cost of centering , shuttering, finishing and reinforcement : 1:1.5:3 stone aggregate 20mm nominal size.

Reinforced cement concrete work in beams, suspended floors, roof having slope 15 degree, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five levels excluding the cost of centering , shuttering and finishing 1:1.5:3 stone aggregate 20mm nominal size.

Providing designation 75 B Brick work in C.M (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2.5 including providing 10 MM thick mortar joints, costs of screening- materials, scaffolding , raking out joints to 15 MM depth curing, taxes and royalty all complete as per building specification and direction of E/I

Reinforced cement concrete work in beams, suspended floors, roof having slope 15 degree, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five levels excluding the cost of centering , shuttering and finishing 1:1.5:3 stone aggregate 20mm nominal size.

Providing Tor steel reinforcement of 10 mm,12 mm & 16 mm dia bars as per approved design and drawing excluding carriage of Rods (straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.

Providing centering and shuttering including strutting, proping etc. and removal of form in Foundations, footings, bases of columns etc.….do……E/I.

Providing centering and shuttering including strutting, proping etc. and removal of form in Lintels, beams, plinth beams, girders, bresummers and cantilevers….do……E/I.

Providing centering and shuttering including strutting, proping etc. and removal of form in Suspended floors, roofs, landings, balconies and access platform….do……E/I.

Making Plinth Protection 50 mm thick of cement concrete (1:3:6)........do........E/I.

Providing 250 mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth .....do.....E/I.

Providing and fixing fan hook 16 mm dia. M.S. bar 1 meter long ..... …do……E/I.

Providing 12 mm thick cement plaster (1:6) ….do… all complete as per building specification and direction of E/I.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface ......do.......E/I.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: (10.14.1.2) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

Supplying fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel section .......do..... as per building specification and direction of E/I-

Supplying fitting and M.S grill made of 20×6mm ms flat as per approved design and drawing properly fabricate with joints continuous filler welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/I-

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing ball bearing for rolling shutters.

Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).

Providing two coats of painting with ready mixed paint of approved shade and make over steel surfaces…..do… ..all complete as per E/I. (With Primer one coat of red lead paint)

Providing and laying 25 mm thick Kotah Stone slab Flooring of approved size and quality-----do----E/I

Providing and laying 25 mm thick Kotah Stone tiles in risers of steps, skirting and pillars of approved size and quality-----do----E/I

Providing and laying 6 mm white glazed tiles in walls over 12mm cement mortar (1:3) and joint with grey cement slurry -----do----E/I With ''A'' grade white 15cmx15cm. Tiles

Providing and placing on terrace (at all floor levels )polyethylene water storage tank I SI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet tanx 1000 lit capacity

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing G.M. Non-return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I. Horizontal non- return valve 25 mm dia weight not less than 375 gms

Horizontal non- return valve 25 mm dia weight not less than 375 gms

Cutting chhajja or cornice for laying G.I. pipe and restoring the same with R.C.C (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) all complete as per specification and direction of E/I

Making holes in walls for laying G.I. Pipes and restoring the same after laying ......do......E/I. 250 mm thick wall

Special type of C.P. Bath room fittings for V.I.P buildings (JAL, Jaguar, Marc or equivalaent mark) Pillar cock (long neck)

Bib cock (ISI)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, 75 mm diameter

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 87.5 (Degree) Bend 75 mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. 12.43.2 (110 mm)

Supplying fitting and fixing vitreous white giazed earthen ware wash hand basin of parry Hindustan or any other I.s.s approved make complete with all fittings C.I. or RA brackets, 32 mm CI brass waste, 15 mm PVC waste Pipe 750mm long with brass coupling at one end and making plumber joints etc all coplete as per specifiction and direction of E/I 550x400mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I (b) Mirrors of 6 mm thick plate glass bevelled adge mirrior including C.P. brass revolving fitting 3 mm ply wood board and C.P. hings to fix with mirror 450mmx125mm

(c ) C.P. brass towel ring 20mmx600mm with bracket container

(d) C.P. brass soap dish container medium quality with screw and hings etc.

Wiring for light poing/ fan poin/exhaust fan ponint/call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit withpiano type swich, phenolic laminated sheet, suitable size PVC/G.I box etc. as Group B

Wiring for light plug with 2x 4 sq. mm PVC insulated copper conductor single core cable in surface/ recessed PVC conduit along with 1 Nos. 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as required.

S/F light plug point with piano type accessories suitable size G.I/ PVC box and surface or in recess with phenolic liminated sheet cover in front including providing and fixing 5 pin, 5/6 amp socket outlet and 5/6 amps plono typeswitch connection, painting etc, as required. 210mmx206mmx48mm deep

Circuit/submain wiring in pvc along with earth wire with the followceing sizes PVC insulated copper conductor single core cabtaein surface/ recessed PVC conduit as required 2x1.5 sq.mm+1x1.5 sq mm earth wire

2x2.5 sqmm+1x2.5 sqmm earth wire

Circuit/submain wiring in pvc along with earth wire with the followceing sizes PVC insulated copper conductor single core cabtaein surface/ recessed PVC conduit as required 2x6 sqmm+1x6 sqmm earth wire

Supply and fixing batten/ angle holder including including connection etc as required

Earthing with G.I. earth plate 600mmx600mmx6mm thick including accessories and providing masonary enclosure having locking arrangement and watering pipe etc.

Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode including solding etc as required.

Supply and fixing 2 pin, 5 amp. Celling rose on the existing junction box/wooden block including connection etc as required

Supplying and fixing following way single pole neutral, sheet MCB distribution board, 240 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, phosphatized and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator). (2.8.3) 6 way, Single door

Supplying Installation, testing and commisioning of following size ceiling fan 3 blades confirming to IS:374:2019 ........do.....E/I. 1400 mm ( 56") Ceiling Fan

12'' (300mm) Metal Exhaust Fan

15/16 Watt LED Bulb

S/F Modular type switch/socket:- Supplying and fixing of following modular switch/socket on the existing modular plate & switch box ......do...... E/I 5/6 amps, one way switch

5/6 amps, 3 pin socket outlet

15/16 amps, 6 pin socket outlet

S/F Modular type electronic fan regulator :- Supplying and fixing tepped type electronic fan regulator on the existing modular plate & switch box ......do...... E/I

S/F Modular boxes, bases & cover plate :- Supplying and fixing following size/modules , GI box along with modular base & cover plate for modular switches in recess etc as required. 12 module

Sand (Lead 02k+18p= 20 KM)

Stone Chips/Aggregates (Lead 02k+33p=35 KM)

Bricks (Lead 01k+07p=08 KM)

Cement + Steel (Lead- 02 KM (P)

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M. including all lifts, levelling, ramming the foundation trenches removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification & direction of E/I.

Providing designation 75B one brick flat soling joints filled with local and including cost of watering taxes, royalty all complete as per building specification and direction of E/I.

Providing P.C.C M 150 in nominal mix (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, skirting, curring, taxes and royalty complete as per building specification and direction of E/I.

Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of sand…………..do….as per building specification and direction of E/I.

Reinforced cement concrete work in beams, suspended floors, roof having slope 15 degree, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five levels excluding the cost of centering , shuttering and finishing 1:1.5:3 stone aggregate 20mm nominal size.

Providing 12 mm thick cement plaster (1:6) with 1.5 mm thick cement punning ….do… all complete as per building specification and direction of E/I.

Providing P.C.C M 200 in nominal mix (1:1.5:3) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, skirting, curring, taxes and royalty complete as per building specification and direction of E/I.

Providing and fixing chequred precast concrete tiles 22 mm thick in footh path and court yeard-----do----E/I (11.20.1 ) Light shade pigment using white cement

Supplying of M.S. pipe 150 mm dia …do…..E/I.

Supplying of M.S. pipe 40 mm dia …do…..E/I.

Supplying and Fixing of Plate …do…..E/I. 8 to 10 mm thick

G.C.l. Sheet thickness in mm conforming to 1.5.227 (f)I 0.8 mm

Labour for fabricating, erecting, hoisting and fixing in position structural steel work in R.S. joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding(machining wherever necessary) with applying a priming coat of red lead paint ali complete as per approved drawing building specification and direction of E/1.

Labour for fitiing and frxing G.C.l. or C.A. sheet roofing in proper slope including the cost of "J" or "L" hooks, limpet Iand biiumen washers, carriage of sheets to work site, and aII taxes all complete as per building specification and loirection of E/I.

Providing two coats of painting with ready mixed paint of approved shade and make over steel surfaces…..do… ..all complete as per E/I. (With Primer one coat of red lead paint)

Providing Tor steel reinforcement of 10 mm,12 mm & 16 mm dia bars as per approved design and drawing excluding carriage of Rods (straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.

Sand (Lead 02k+18p= 20 KM)

Stone Chips (Lead 02k+33p=35 KM)

Bricks (Lead 01k+07p=08 KM)

Cement (Lead- 02 KM (P)

ADD GST @12%

ADD LABOUR CESS @1%

RAJIB KUMAR PAUL