PROVISION OF RETAINING WALL FOR VEHICLE RAMP AT ASC BN MT SOAKAGE WELL DRAINAGE PIPE NEAR COK HOUSE OF ARMY AVN SQN SPL OPS AND 06 Nos 70 WATT LED FLOOD LIGHT FOR HEAVY VEHICLE REPAIR BAY TPT WKSP COY EME LIGHITING CONDUCTOR INCLUDING ALUMINIUM STRIP

Amount

BOQ ( Sch 'A') B/R items Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil complete all as specified

M & L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mash concrete complete all as specified and directed.

Material & Labour for brick work with sub class `B’ bricks using old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated soils to a distance exc 250m but n exc 500m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Use and waste of form work to sides of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work vertical or to batter, flat, rough finish surface of concrete complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in footing, foundation beams, plinth beams, bases of columns complete all as specified and directed.

Use and waste of form work to walls, retaining walls, basement walls, ballast walls and the like including attached pilasters and buttresses and similar work vertical or to batter, flat, fair finished surface of concrete complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like of any thickness above top of footing including attached pilasters and buttresses complete all as specified and directed.

S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc.complete all as specified and directed.

S & F mild steel rolled sections channel angle Tee section and in tubular section as in main and cross beams, hip and jack rafters; purlins,post where connected to common rafters and running rails, fixed with angle cleat or other connecting plates or embbeded in concrete confirming Fe-290 (grade E-165) complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

M&L for 100mm thick Plain Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.

Material and labour for cement concrete 1:1.5:3 type A1 (using 20mm graded stone aggregate) as in floor , pavement, hard standing etc including broom finish complete all as spcified and directed.

M & L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with with ceiling compound grade 'A' complete all as spcified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in coping/ kerb/ bed blocks for hold fast/ side of interlocking paver blocks etc including weathering and throating as required including necessary form work complete all as specified and directed.

Construction of brick masonry Soakage Wells, excavation and earth work in hard/dense soil/disintegrated rock, foundation in PCC 1:3:6 type -C2, wall of honey combed and solid brick work in CM 1:4, RCC cover slab Type-A1 (1:1.5:3) using 20mm graded crushed stone aggregate duly reinforced with 8 mm TMT bar @ 120mm C/C, filling with brick bats, complete of internal size 2.40m x 3m depth complete all as specified and directed and as shown on drawing No TD-309 sheet 1/4 to 4/4.

Removing excavated soils to a distance n. exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M & L for precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 including necessary form work complete all as specified and directed. (reinforcement to be measured separately)

M&L for cement concete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 150/160 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

Material and labour unplasticised PVC pipe 160mm dia type 'B' with wall thickness 4mm (Min) of pressure rating 4 KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed.

Excavating in post holes as in hard/dense Soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

S&F prepainted aluminium zinc corrugated steel sheet (galvalume base) of thinknee 0.50mm having tensile strength of 550 Mpa , in colour and profile as apporved by GE and to be facotry moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified and directed

M&L for applying two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on steel and iron surfaces of any description, over 10cm in width or girth including preparation of new steel and iron surface complete all as specified and directed

Material & Labour for brick work with sub class `B’ bricks using old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L for brick work with sub class `B’ bricks, straight on plan to any radius as in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Use and waste of formwork to sides and soffits of beams, bands and the like for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels and the like complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed

M&L for RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges as in rough finished surfaces of concrete complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in chullah hoods, chajjas, troughs and similar items complete all as specified and as directed

S & F Mild steel TMT bars 5mm dia and over upto 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed

M&L for broken stone or boulders Hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed

Supply only WPC complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair complete all as specified and as directed

S&F Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 300 mm long complete all as specified and as directed.

S&F steel windows with side hung shutters including box type hinge with steel handle, and steel peg stay including 03 Nos of tower bolt 100mm long in each window, complete without glazing bars, dovetailed or welded and making good disturbed surface as per existing surface in CM 1:4 complete all as specified and directed.

S&F Steel ventilators with top hung shutters incl hinges steel peg stay complete all as specified and directed.

S&F framed work such as grills,gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders ; framed balusters; walk ways; railing and simillar work Con-forming to Fe 290 Gde E-165 complete all as specified and directed. .

S&F figured 3mm thick glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with alluminium staple and around all beading complete all as specified and as directed

S&F solid PVC door frame of size 50x47mm made of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing Sintex Polycon and equivalent complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheets for strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8.2.1 B.of SSR Part-II 2004 complete all as specified and directed.

S & F aluminium handle, cast type anodized 150mm size complete all as specified and directed.

S & F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F Butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all GI Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item No 52 above but 25mm dia (Bore).

S&F rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 750 ltrs capacity with and including 25mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

S&F Ball Valves Brass, 25mm dia, quarter turn, femaled threaded, screwed both ends for iron pipe for unions, complete all as specified and directed.

S&F 15mm dia bib taps CP Brass with Capstan head, screwed down, screwed for iron pipe of bore 15mm complete all as specified and directed.

S & F brass CP pillar taps fancy type for iron pipe of bore 15mm fancy type with capstan head complete all as specified and directed.

S&F PVC Connections 15mm size with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed.

S&F Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply& Fixing tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8 ) type D-2 (using 40mm graded stone aggregate) as in sub base finished even and rough complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) as in level course with finshining in cement concrete surface even and rough to receive screed bed complete all as specified and as directed.

M&L for Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over with and including screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with and including back coat or screed bed or bedding layer 10mm thick in CM 1:4 and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for Mirror polished Kota Stone slab flooring 18 - 20 mm thick over with and including cement screed bed 15mm thick in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over with and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

S&F vitreous China squatting pan, Orissa pattern incl CI trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white/coloured (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging device etc.) complete all as specified and directed

S&F PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 complete all as specified and as directed.

S&F vitreous china wash basin, white, flat back, size 450mm x 300mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F Hand Shower (health faucet) CP Brass 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer) as approved by the GE complete all as specified and directed.

S&F Glass shelf 450 x 125 x 6mm (with ABS Bracket) chromium plated bracket guard and stainless steel railing complete all as specified and as directed

M&L for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc complete all as specified and as directed.

M&L for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and as directed.

M&L for cast iron spun pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and as directed.

S & F CI spun pipe bends 100mm bore of any radius, diminishing piece or tappers complete all as specified and as directed.

S & F CI spun pipe bends 75mm bore of any radius, diminishing piece or tappers complete all as specified and as directed.

S & F CI spun pipe branch piece 100mm bore, double(eaqual or unequal), with parallel branches and fitted with oval access door complete all as specified and as directed.

S & F CI spun pipe branch piece 75mm bore, single(eaqual or unequal),ordinary or inverted spigot or socketted type with parallel branches and fitted with oval access door complete all as specified and as directed.

Extra over CI spun pipe fittings if fitted with oval access door 100mm bore complete all as specified and directed.

Extra over CI spun pipe fittings if fitted with oval access door 75mm bore complete all as specified and directed.

S & F CI spun fittings floor trap of size 75mm with grating including jointing to CI pipe with lead joint incl making joint water tight. all as specified and as directed.

S & F CI spun cowls 100mm bore, complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concret 1:2:4 type B-1 smooth finished, and reforming benching as required, for internal dia of pipe 150mm complete all as specified and directed.

M&L for providing PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops rouded or chamfered on edges complete all as specifed and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection laid in bays including necessary form work and finishing even and smooth w/o using extra cement complete all as specifed and directed.

M & L for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifed and directed.

S&F GI snap grid frame work for false ceiling size of grid 605 mm x 605 mm fixed to walls with rawl plugs & screws and hanged to roof with and including 4mm dia GI wire suspender of suitable length Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed.

Supply & fixing 4mm thick non asbestos E-board classic cement building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed.

M & L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & including a coat of primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed

BOQ ( Sch 'A') E/M Works Supply and fixing LED flood light 70 watt, 230 V AC out door type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and average life of flood light should not be less than 50000 hours, including clamps, nut, bots, satisfaction of Engineer in charge complete all as specified and directed. Note : The contractor shall submit two years of warranty of LED light fittings from the manufacturer alongwith Purchase Voucher

S& F point wiring for one light point point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and white wash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor (FRLS) cable earth wire and connected to earth dolly complete all as specified and directed Note:- wiring shall be done in colour coding as directed by Engineer in charge.

All as per item No. 95 herein before but one socket outlet 5 Amps on the same board.

S & F switch piano flush type single pole, one way 5/6 Amp complete all as specified and directed.

M&L for Earthing complete with galvanized sheet earth plate electrodes 60x60x6.3 mm thick buried directly in ground (earth pit not less than 2. 25mtr deep below ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts , check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 and including excavation and earth work in any type of soil or soft/disintegrated rock, GI pipe light grade 15 mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanized Iron/steel of size 75x75x 25mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded crushed stone aggregate reinforced with 6 mm dia TMT bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh,20 mm dia GI pipe light grade for watering and connected to earth test point including brazing at all joints except at test point and testing complete all as specified and directed by Engr-in-Charge.

M & L for Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed.

M & L for Test terminal block made of gun metal or phosphorus bronz size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25mm long hexagonal head screw complete all as specified and directed.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross section area 10Sqmm 2 core laid in trenches or passing through pipes/ducts and including making good disturbed surfaces of road with using PCC 1:2:4 type B-1 complete all as specified and directed.

M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed.. Note :- Thickness of sand cushioning shall be measured after punning.

M&L for sub class 'B' brick for protection of underground cable comlete all as specified and directed.

Supply and Fixing steel tube light grade galvanised 32 mm bore with all GI fittings for protection of underground cable under road/culvert and fixing on wall with saddle, screw complete all as specified and directed.

Supply & Fixing lamp holder PVC insulated body with back plate for angle/battern fitting complete all as specified and directed

Supply & Fixing socket outlet 2 in 1, 3 pin, 6 Amp flush type complete all as specified and directed.

Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole neutral (SPN) and current carrying capacity 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Supply and fixing LED lights T-5 fitting 1x 20W (warm/milky white as required on site), 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light should not be less than 50,000 hours complete all as specified and directed.. Make Havells/phillips/Bajaj Note:- The contractor shall submitt 2 year warrenty of material LED tube light from manufracturer alongwith purchase voucher

Supply and fixing 10W bulk head light PDC aluminium housing with polycarbonate diffuser, SMD LED and heat sink integrated with housing complete all as specified and directed. Make : Havells Cat Pat HEXAFT10WLED857SSYMBOPC or equivalent cat part in make phillips/Bajaj/C&S .

Supply and Fixing propeller type AC ventilating fans 230 volts, 50 C/S heavy duty 1400 RPM, 300 mm sweep (Exhaust fan) metal body and blades protected by metal guards, Bird guard for safetry,two sleeves bearings, complete including the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor complete all as specified and directed.

M & L for Aluminium strip 25 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified

Jain construction co