Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹4.2 L
EMD Value
₹10,573
Closing Date
1 Jan 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Executive Engineer
O/o Assistant Executive Engineer Electrical Irrigation Sub Division Aluva
GENERAL AMC 2025 2026 CHENGAMANAD AREA Fully Comprehensive Annual Maintenance of Chengamanad No1 chengamanad no 2 Mekkad uliyanoor keezhmad amp kurishupalli South Aduvassery LI Schemes under Electrical LI section Aluva General Elec
2025_Irrig_811584_26
PWD/BLDG/10706/ALY/2025-2026
Open Tender
Electrical Works
Item Rate
365 days
Aluva
Please refer Tender documents.
11 documents required · 11 mandatory
₹935
₹10,573
18 Dec 2025
18 Dec 2025
3 Jan 2026
18 Dec 2025
1 Jan 2026
18 Dec 2025
Work Name:GENERAL-AMC- 2025-2026. CHENGAMANAD AREA.-Fully Comprehensive Annual Maintenance of ,Chengamanad No1,chengamanad no 2,,Mekkad, , uliyanoor,keezhmad & kurishupalli, South Aduvassery LI Schemes under Electrical LI section Aluva-General Electrical Work
䙋䴠歡ⱥ愠数桴楤敲瑣潩景搠灥牡浴湥慴瑳晡瑡猠瑩敂牡湩潎㘠〳뼹䑏㤲〹㜶㈯㈰ⴴ〲㔲ऺ慃牲楹杮漠瑵挠湯牴汯眠物湩潦慰敮楷桴渠牯慭敭整獲愠摮椠摮捩瑡潩慬灭潦湩整捲湯敮瑣湩桴潣瑮潲敤楶散⽳攠畱灩敭瑮湩汣摵湩牰癯摩湩畳瑩扡敬猠穩湩畳慬整潳正瑥瑡琠敨琠牥業慮楴湯瀠楯瑮牯猠汯敤敲牰灯牥祬牰癯摩湩畮扭牥湩敦牲汵獥映牯琠敨瀠潲数摩湥楴楦慣楴湯漠桴楷楲杮敫灥湩桴楷楲杮映物祢猠極慴汢楴⽥琠敩洠畯瑮⽳倠䍖搠捵⁴瑥獡爠煥極敲ㄭ㔮‰煳洠楳杮敬爠湵眠瑩敲畱物摥猠捯敫獴Ԯ敭牴步䑏㜵㘷⼵〲㔲㈭㈰㨶畓灰祬愠摮映瑩楴杮䐠杩瑩污洠汵楴畦据楴湯洠瑥牥琠敲摡嘠ⱁ䙐䬬ⱗ坋ⱨ愠捣牵捡⁹汣獡‱䍌ꑄ䑏㜵㘷⼶〲㔲㈭㈰㨶畓灰祬愠摮爠湥睥污漠桔敲桐獡楄楧慴潖瑬敭整捡畣慲祣挠慬獳ㄠ椠慰敮潢牡晡整楤浳湡汴湩桴慤慭敧湯ⱥ䰠愦灭吻漠煅極慶敬瑮洠歡n伀㕄㜷㜶㈯㈰ⴵ〲㘲区灵汰⁹湡楦楸杮琠牨敥瀠慨敳搠杩瑩污䄠浭瑥牥愠捣牵捡⁹汣獡汣獡椱硥楣楴杮瀠湡汥戠慯摲嬠䑏㤲〹〶㈯㈰ⴴ〲㔲区灵汰⁹湡牰癯摩湩圷䰠䑅䈠汵湩琠敨攠楸瑳湩楦瑴湩瑥獡爠煥極敲罤䑏㤲〹㤵㈯㈰ⴴ〲㔲区灵汰⁹湡楦汬湩景琠慲獮潦浲牥漠汩漠潧摯焠慵楬祴琠桴牔湡晳牯敭猯慴瑲牥 敲畧慬潴瑥獡爠煥極敲դ楌牴婥䑏㤲〹㠵㈯㈰ⴴ〲㔲区灵汰⁹湡牰癯摩湩景䰠䑅䤠摮捩瑡潩慬灭湩瀠湡汥戠慯摲戭畬潣潬牵z伀㉄㤹㔰⼷〲㐲㈭㈰㨵畓灰祬愠摮瀠潲楶楤杮䰠䑅椠摮捩瑡牯潦污潶瑬条慲杮獥ⴠ删摥片敥Ɱ䈠慬正教汬睯漠牏湡敧䌠汯畯潲䑏㤲〹㌶㈯㈰ⴴ〲㔲猺灵汰⁹湡牰癯摩湩䉁佒倠䙕ⴠ㔷‰畍瑬灩牵潰敳䔠灸湡慤汢啐䘠慯湩畳慬楴湯匠慥慬瑮匠牰祡䰮䑏㐱
704/2025-2026:Copying charges of Electrical Drawing per A3 first sheet WOD144705/2025-2026:Copying charges of Electrical Drawing per A3 sheet additional copiesOD144706/2025-2026: Charges to be paid at electrical inspectorate/kseb actual amount may be reimbursed on production of original documentsL.S6OD144708/2025-2026:Supply and providing Taparia make Combination Plier (210mm)-1no ,insulated screwdriver (250mm)-1no,Line tester(200mm)-1no,Double Ended Spanner Set DEP12 (12 Pcs),6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x27, 25x28, 30x32 mm, electrical SafetyRubber hand Gloves-1pair each set Pipe works OD57774/2025-2026:Charges for dismantling old 200mm NRV on existing MS pipe with out any damages after demolishing existing concrete foundation. JobàOD57775/2025-2026:supply and fixing NON RETURN VALVE cast Iron double flange as per IS/5312 PN 1.6 rating complete with Bronze body & wedge Stainless Steel spindle, Gland packing, Rubber gasket 200mm dia Non Return ValveË14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.cumOD57779/2025-2026:Charges for reconditioning damage parts 250mm wheel valve replacing spare with original make including lathwork transportable etc.jobÂOD58085/2025-2026:Supply of Kirloskar make Horizontal centrifugal end suction pump model DB 80/20, with CI body, CI impeller, gland packed pump existing motor pump set in good working condition AMC of motor pump setszOD299088/2024-2025:Fully Comprehensive Annual Maintenance of upto 5 HP Vacuum motor pump set , D.O.L starter ,controlling electrical accessories , etc complete for a period of 12 months including attending all repairs , reconditioning the damaged parts, replacing spares with original make as per sample, dismantling and refitting , removing foreign bodies , renewal of gland packing , gasket packing , rubber packing , greasing the bearing etc as and when required including overhauling of pump, overhauling of the motor, maintenance of motor thorughout the AMC period whenver necessary (excluding rewinding) repairs of vaccum pipe line, starter, valves electrical accessories etc as required complete in good working condition including painting the motor pumpset, base plate all time during the period of contract and the faults should be rectified with in the time allowed DayÃOD299087/2024-2025: Fully Comprehensive Annual Maintenance of 11-30 HP squirrel cage induction motor with split case / End suction pump set , starter, controlling electrical accessories , panel board,etc complete for a period of 12 months including attending all repairs ,overhauling & reconditioning of starter , replacing of damaged contacts, no volt relese coil, overload coil, reconditioning and refil oil, overhauling of panel board by checking the wire connections, control wiring, servicing of switch geares as required, replacing the burnout fuse links, repair the damaged hinges replacing wornout beedings including painting etc. replacing the damaged coupling bush, and coupling bolts, Overhauling and reconditioning the pumpset by reconditioning the damaged parts , replacing spares with original make as per sample , removing foreign bodies , renewal of gland packing , gasket packing , rubber packing , greasing the bearing etc as and when required, painting the starter, base palte, pumpset and maintain the motor pump sets starter , electrical accessories etc complete in good working condition all time during the period of contract and the faults should be rectified with in the time allowed . ÄOD299086/2024-2025: Fully Comprehensive Annual Maintenance of 31-60 HP squirrel cage induction motor with split case / End suction pump set , starter, controlling electrical accessories , panel board,etc complete for a period of 12 months including attending all repairs ,overhauling & reconditioning of starter , replacing of damaged contacts, no volt relese coil, overload coil, reconditioning and refil oil, overhauling of panel board by checking the wire connections, control wiring, servicing of switch geares as required, replacing the burnout fuse links, repair the damaged hinges replacing wornout beedings including painting etc. replacing the damaged coupling bush, and coupling bolts, Overhauling and reconditioning the pumpset by reconditioning the damaged parts , replacing spares with original make as per sample , removing foreign bodies , renewal of gland packing , gasket packing , rubber packing , greasing the bearing etc as and when required, painting the starter, base palte, pumpset and maintain the motor pump sets starter , electrical accessories etc complete in good working condition all time during the period of contract and the faults should be rectified with in the time allowed . OD299089/2024-2025: Fully Comprehensive Annual Maintenance of 61-110 HP Slip ring induction motor with split case / End suction pump set , starter, controlling electrical accessories , panel board,etc complete for a period of 12 months including attending all repairs ,overhauling & reconditioning of starter , replacing of damaged contacts, no volt relese coil, overload coil, reconditioning and refil oil, reconditioning the slipring unit as required, overhauling of panel board by checking the wire connections, control wiring, servicing of switch geares as required, replacing the burnout fuse links, repair the damaged hinges replacing wornout beedings including painting etc. replacing the damaged coupling bush, carbon brush and coupling bolts, Overhauling and reconditioning the pumpset by reconditioning the damaged parts , replacing spares with original make as per sample , removing foreign bodies , renewal of gland packing , gasket packing , rubber packing , greasing the bearing etc as and when required, painting the starter, base palte, pumpset and maintain the motor pump sets starter , electrical accessories etc complete in good working condition all time during the period of contract and the faults should be rectified with in the time allowed . óOD57772/2025-2026:Fully Comprehensive Annual Maintenance of 31-60 HP Slip ring induction motor with split case / End suction pump set , starter, controlling electrical accessories , panel board,etc complete for a period of 12 months including attending all repairs ,overhauling & reconditioning of starter , replacing of damaged contacts, no volt relese coil, overload coil, reconditioning and refil oil, reconditioning the slipring unit as required, overhauling of panel board by checking the wire connections, control wiring, servicing of switch geares as required, replacing the burnout fuse links, repair the damaged hinges replacing wornout beedings including painting etc. replacing the damaged coupling bush, carbon brush and coupling bolts, Overhauling and reconditioning the pumpset by reconditioning the damaged parts , replacing spares with original make as per sample , removing foreign bodies , renewal of gland packing , gasket packing , rubber packing , greasing the bearing etc as and when required, painting the starter, base palte, pumpset and maintain the motor pump sets starter , electrical accessories etc complete in good working condition all time during the period of contract and the faults should be rectified with in the time allowed .LiftingÐOD299081/2024-2025: Lifting the upto 1-3 HP motor after disconnecting the wire connection, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform. âOD299078/2024-2025: Lifting the 5-10 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform. áOD299082/2024-2025: Lifting the 11-30 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform. ÞOD299080/2024-2025:
Lifting the 31-60 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform. ÞOD299079/2024-2025:Lifting the 61-110 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.03 MB
Tendernotice_2.pdf
PDF • 0.10 MB
Tendernotice_3.pdf
PDF • 0.36 MB
BOQ_1378497.xls
BOQ • 0.33 MB
NIT.pdf
Tender Documents • 0.03 MB
SBD.pdf
Tender Documents • 1.63 MB
MAKE.pdf
Tender Documents • 0.21 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .