Repair/replacement of internal wiring, distribution boards, service cables and other connected works at Charri camp at Mil Stn Dharamshala.

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable in and including PVC casing and caping of suitable size (as per conductor run) with all fittings such as bend/corners/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly in existing CI/wooden box covered with 3 mm thick plastic laminated sheet for one light point/ fan/exhaust fan point/ bell point etc controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge. Note : i) New Sunken boxes wherever required shall be measured paid separately. ii) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost

All as per item No 2 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 2 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 2 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M&L for switch socket combination 2 in 1, 5 Amp and 15 Amp flush type all as specified and directed.

M&L for Switch socket combination 2 in 1, 5 A flush type all as specified and directed.

M&L for switch piano flush type single pole one way 5/6 Amp

Material and labour for Bell push Switch flush button single pole one way 5 Amps complete

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.

M&L for Sub main wiring in PVC casing caping/conduit with 2 Nos single core PVC insulated copper conductor cable flame prrof size 4 sqmm multistrand and 2.5 sqmm PVC insulated flame prrof and earth wire using suitable size of copper thimble all as directed

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job.Make: Havells/Legrand/ABB

Supply and fix in replacement of MCB 10 KA 'C' curve , SP up to 5-32 Amp and 240 V all as specified and directed.

Supply and fix in replacement of MCB 10 KA 'C' curve , SPN 32 Amp and 240 V all as specified and directed.

S&F LED lights fitting 1x18W ,220V ,AC decorative box type with driver ,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilling rose all as specified and directed.

S&F LED lights fitting mirror type with high output diffuser 2 feet ,10 watt 220 V AC decorative type with driver holder with LED lamp connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

S&F LED light fitting 1x9W/1x10W bulk head lumaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 15/18 watts for batten fitting, including plastic square board of required size complete all as specified.

Supply and fix AELIUS LX LED LAMP 7 W BC 6500 K 7 watt all as per Polycab Cat part No. LLP0101029 or equivalent in Bajaj/Havells/WIPRO

1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr including 4 mm suspension wire, one twin core cable flat or circular stranded conductor size of 10 Sqmm, 2 core complete all specified and as directed by the Engineer-in-Charge.

S&F LED luminaire 600 mmx 600mm ,35/36 Watt ,220 Volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver , holders, LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size omplete all specified and as directed.

Call bell, ding dong, AC 230 volt, single pole, complete all as specified and as directed by the Engineer-in-Charge.

Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick burried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40x40x6mm and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate complete all as specified and shown in EP-3 of SSR Part-I & as directed by Engr-in-Charge.

Supply & fix (in replacement) of existing unserviceable Sheet metal enclosure with DB’s suitable for MCBs of triple pole and neutral, 4 way, 415 volt, double door type with 200 amp rated bus bar double door type with one incoming and 12 outgoing complete all specified and as directed by the Engineer-in-Charge. Note: (i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. (ii) The disturbed surface shall be match with existing surface. (iii) Make-Cat Part No. VYV0DL-P or equivalent in Havlles /ABB

Supply and fix (in replacement) of MCB TPN/FP 40 Amp complete all specified and as directed by the Engineer-in-Charge. Make: Hager cat part No.: NBN463N or equivalent in any make as specidied in Appx'C".

KISHAN CONTRACTOR

ess are electricals and electronic

Mahashakti Enterprises

M/S HIM BUILDERS

vivek and co

M/s Raj Construction

ABHAY ELECTRICAL