Tender for Attend the cable fault at site FROM RECIVING the message from CONCERN S/DN AND LOCATING THE FAULT UNDERGROUND CABLE and Rectify the fault (XLPE cable will be supplied by DGVCL) with cable end termination and straight through joints kits (to be supplied by contractor) as per norms under all scheme for the year 2024- 2025 for Kadodara-2 ,Kamrej R / 2 & Sevani Sub division under Kadodara Division.

(Name of Work:- ARC work of Attend the cable fault at site within 03 HRS FROM RECIVING the message from D.E/JE

OF CONCERN S/DN AND LOCATING THE FAULT UNDERGROUND CABLE

Sr. Item Code Total

Description Unit Rate Amount

Labour charge for excavation of cable trench of 400mm width x Meter

1200mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered

Labour charge for excavation of cable trench of 600mm width x Meter

1200mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered

Labour charge for excavation of cable trench of 400mm width x Meter

1500mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench leng th is to be considered

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to Meter

240 mm2 & preparation of sand layer 100mm thick, in the cable

trench & covering the cable with 150 mm dia (Outer), thickness

mm, 1.0 meter long RCC half round muffs and providing and fixing

of 4inch width yellow colour polyethylene tape with

printing"CAUTION ELECTRIC CABLE BELOW' at 0.75 m depth from

ground surface after laying cable in trench. This will provide

indication that electric cable is passing underground so as to

protect cable from mechanical injuries, refilling the same, as per

Instruction of E gineer in Charge (EIC) .

Providing & fixing concrete stone route marker of 300 mm width x No

150 mm thick x 650 mm height embedded in earth at least 300 mm

below & 350 mm above ground level respectively at distance

approx. 50 meters along the length of cable. The RCC concreting

(1:2:4)(all necessary materials will be in bidder's scope) of route

marker is to be carried out 300 mm width x 150 mm thick x 300 mm

5 9925000009 below ground level as per instruction of EIC. The route marker

should be with name of company with approved yellow colour-

DGVCL. The distance from marker to cable and cable depth with

feeder name etc., marked with arrow sign is to be painted on it. The

route marker is to be fixed at location near to any fixed permanent

location (not necessary to fix exact on top of cable) as per

instruction of EIC.

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up to perJob

240 mm 2 on DP Structure with fixing of 02 Nos polymer cleats on

top and middle part. Polymer cleats, nut bolts etc. fixing material to

be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class4,Green color, 110mm perJob

O.D. 8.5mm thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification on the erected DP structure for the mechanical

7 9925000015 protection of cable by inserting the cable inside HDPE pipe. The

HDPE pipe shall be erected in such a way that 300mm shall be

below the ground level and the rest 2700 mm shall be supported on

the DP Structure with 01 No Polymer cleat. All materials including

polymer cleat and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI No

pipe with pit to be filled with salt & coke and construction of

chamber as per DGVCL Drg. No. dg /100 for

8 9925000016 DP and cable. The earthing pit should be joined with cable by

G.I. strip of size 1" width & 2 mm thick. All material GI pipe,

Coke Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor) for No

9 9925000017 up to 11kV 3C x 185 mm2 size XLPE cable as per DGVCL technical s

Supply & fixing of heat & shrinkable end terminations No

10 9925000018 (outdoor) for up to 22 kV 3C x 185 mm 2 size XLPE cable ( as per

DGVCL technical specification)

Supply & fixing of heat shrinkable type end terminations No

11 9925000019 (indoor) for up to 11kV 3C x 185 mm 2 size XLPE cable as per

DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations (indoor) for No

12 9925000020 up to 22 kV 3C x 185 mm 2 size XLPE cable as per

DGVCL technical specification

Supply & fixing of heat shrinkable straight through joint for up to No

13 9925000021 11kV 3C x 185 mm 2 size XLPE cables as per DGVCL technical

Supply & fixing of heat shrinkable straight through joint type for up No

14 9925000022 to 22kV 3C x 185 mm 2 size XLPE cable as per

DGVCL technical specification

Labour charge for excavation of 2100mm long x 1200mm wide x No

1200 mm deep joint pits for installation of 11kV / 22kV

Straight through joints as per instruction of engineer-in-charge &

covering the cable with 150 mm dia (Outer), thickness 25 mm,

meter long RCC half round muffs & refilling same as per instruction

Testing of cable at various points and commissioning the feeder as No

16 9925000025 per instruction of engineer-in-charge.Test result shall be submitted

by contractor with bill.

Preparation and submission of 6 (six) copies, of complete layout Set

17 9925000026 drawings with GIS mapping as per actual cable routing showing

road crossing, HDPE pipe sleeving, jointing locations, markers etc.

9925000047 Laying of any size of 11/ 22 KV XLPE /PILCCable in readymade per

trench or in open space cable

9925000048 To Attend the cable fault at site within 03 hrs from receiving the No

19 message from D.E of concern S/dn and locating the fault under

TOTAL AMOUNT :-Twenty Seven Lac Only 27,00,000/-

TOTAL AMOUNT :-Twenty Seven Lac Only 27,00,000/-

Ex. Eng. (O&M),

Kadodara Division, DGVCL.