Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹3.6 L
Closing Date
1 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GENERAL
15 conditions · 4 needing a document upload
(As per advance correction slip No.1 of GCC April 2022) The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of GCC-April-2022 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Annexure V :- As per Clause 6.1 Part-1 of GCC- The tenderer shall submit a copy of certificate (Enclosed as Annexure-V) stating that all their statements/documents submitted alongwith bid are true and factual. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid.
The minimum Eligibility Criteria: for costing more than 50 lakhs :- Applicable. 10. Eligibility Criteria: 10.1 Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b (1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution
Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. 10.1Definition of similar works : The criteria for similar nature of work for said tender is given below as CEE/JBP's L. No. WCR/L/10/Similar Nature/3689, dtd. 11.04.2012. similar nature of work criterion for Electrical General Service (GS) for Electrification work in Electrical department of WCR shall include works executed with Central Government, Semi Government/PSUs of Central Government and/or State Governments have been defined as under :- (A)The level of skills required in following work of electrification is almost same. (a) Electrification of service buildings. (b) Electrification of staff quarters, offices. (c) Electrification of offices. (d) Electrification of road & colony lighting. (e) Electrification of circulating area lighting. (f) Erection & commissioning of LT, HT upto 33 kV overhead mains. (g) Sub-station installations & commissioning. (h) Electrification of washing pits, Sheds & Workshops etc. (i) Any above work or combination of (a) to (h) above.
30 conditions · 4 needing a document upload
Make in India Policy: Provisions of Make in India Policy 2017 issued by Govt. of India, as amended from time to time, shall be followed for consideration of tenders.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Performance Guarantee: - Additional 5% PG to besubmitted if tender awarded more than 5% below(Ref : para-4 of Rly. Bd. L.No.2022|CE-UCTIGCC2022[POLICY/Pt.I (E-3320424), Dated13.03.2026.
Improvement and Provision of lighting in yards of Kota Division. (Phase-1)
EL-50-312-2026-27
EL-50-312-2026-27
Open
Works - General
6 Months
Kota, Rajasthan
₹0
₹3.6 L
1 Jun 2026
8 May 2026
18 May 2026
61 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,82,14,066.31 | ||
| — | 52.00 | — | — | ||
| Supply and fabrication of 12.5 M high mast totally hot dip galvanized and suitable for wind velocity bas par IS 875 part-3. The mast shaft shall be in two finished sections. It shall also include accessories for 12.5 M high mast including head frame, steel wire rope 6mm dia (7/19 construction) single drum which, Galvanized Lantern carriage arrangement suitable for 6 luminaries symmetrically and it control gear boxes and lighting final with integral power tool along with accessories as per detailed specifications attached. The mast shall have one longitudinal weld and single dipping (hot dip galvanized) as per section without luminaries. | — | — | — | 67,79,500 | |
| — | 52.00 | — | — | ||
| Erection, testing and commissioning of 12.5 M high mast totally hot dip galvanized and suitable for wind velocity bas par IS 875 part-3. The mast shaft shall be in two finished sections. It shall also include accessories for 12.5 M high mast including head frame, steel wire rope 6mm dia (7/19 construction) single drum which, Galvanized Lantern carriage arrangement suitable for 6 luminaries symmetrically and it control gear boxes and lighting final with integral power tool along with accessories as per detailed specifications attached. The mast shall have one longitudinal weld and single dipping (hot dip galvanized) as per section without luminaries. | — | — | — | 7,54,000 | |
| — | 312.00 | — | — | ||
| Supply of LED FLOOD Light Fitting 150 watt complete suitable for 230 V AC 50 HZ as per detailed technical specifications attached. | — | — | — | 4,05,600 | |
| — | 312.00 | — | — | ||
| Installation of LED Light Fitting as per detailed technical specifications attached. | — | — | — | 93,880.8 | |
| — | 30.00 | — | — | ||
| Supply and fabrication of octagonal galvanized steel pole 5 mtr long with foundation bolts, single arm type etc. with junction box and cover complete. (a)Pole ID-BOP 5030 (b)Height-5 meter ©Top-70mm (d)Bottom-130mm (e)Thickness-3mm (f)Base plate-200x200x12 mm (g)Foundation bolts-PCD-200 : bolt size 4x16mmx600mm long (IS:1367,Part-III) (h)single arm brackets (i) Foundation size (W x L x H) 500x500x1000 mm. Note: -1. Octagonal steel poles with foundation bolts should be confirming to std. 35 grade. Base Plate IS 226/IS 2062. Grade of PCC should be M-20 2. All material will be supplied by contractor. | — | — | — | 4,76,455.8 | |
| — | 30.00 | — | — | ||
| Erection, testing & commissioning of octagonal galvanized steel pole 5 mtr long with foundation bolts, single arm type etc. with junction box and cover complete. (a)Pole ID-BOP 5030 (b)Height-5 meter ©Top-70mm (d)Bottom-130mm (e)Thickness-3mm (f)Base plate-200x200x12 mm (g)Foundation bolts-PCD-200 : bolt size 4x16mmx600mm long (IS:1367,Part-III) (h)single arm brackets (i) Foundation size (W x L x H) 500x500x1000 mm. Note: -1. Octagonal steel poles with foundation bolts should be confirming to std. 35 grade. Base Plate IS 226/IS 2062. Grade of PCC should be M-20 2. All material will be supplied by contractor. | — | — | — | 64,950 | |
| — | 128.00 | — | — | ||
| Supply and fabrication of octagonal pole/pole of 3-meter (approx.) height Double ArmeType capable of fixing of LED light fitting and should have in built junction box. The material should be of relevant IS and design as per site conditions (Note: - Design should be approved by railways before supply by competent authority.). The Pole should becomplete in all respect as per explanatory notes. | — | — | — | 8,96,119.04 | |
| — | 128.00 | — | — | ||
| Erection, testing & commissioning of octagonal pole/pole of 3-meter (approx.) height Double ArmeType capable of fixing of LED light fitting and should have in built junction box. The material should be of relevant IS and design as per site conditions (Note: - Design should be approved by railways before supply by competent authority.). The Pole should becomplete in all respect as per explanatory notes. | — | — | — | 99,840 | |
| — | 20.00 | — | — | ||
| Supply and fabrication of octagonal galvanized steel pole 5 mtr long with foundation bolts, Double arm type etc. with junction box and cover complete. (a)Pole ID-BOP 5030 (b)Height-5 meter ©Top-70mm (d)Bottom-130mm (e)Thickness-3mm (f)Base plate-200x200x12 mm (g)Foundation bolts-PCD-200 : bolt size 4x16mmx600mm long (IS:1367,Part-III) (h)Double arm brackets (i) Foundation size (W x L x H) 500x500x1000 mm. Note: -1. Octagonal steel poles with foundation bolts should be confirming to std. 35 grade. Base Plate IS 226/IS 2062. Grade of PCC should be M-20 2. All material will be supplied by contractor. | — | — | — | 3,47,637.2 | |
| — | 20.00 | — | — | ||
| Erection, testing & commissioning of octagonal galvanized steel pole 5 mtr long with foundation bolts, Double arm type etc. with junction box and cover complete. (a)Pole ID-BOP 5030 (b)Height-5 meter ©Top-70mm (d)Bottom-130mm (e)Thickness-3mm (f)Base plate-200x200x12 mm (g)Foundation bolts-PCD-200 : bolt size 4x16mmx600mm long (IS:1367,Part-III) (h)Double arm brackets (i) Foundation size (W x L x H) 500x500x1000 mm. Note: -1. Octagonal steel poles with foundation bolts should be confirming to std. 35 grade. Base Plate IS 226/IS 2062. Grade of PCC should be M-20 2. All material will be supplied by contractor. | — | — | — | 43,300 | |
| — | 151.00 | — | — | ||
| Supply of LED FLOOD Light Fitting 50 watt complete as per detailed technical specifications attached. | — | — | — | 4,52,577.2 | |
| — | 180.00 | — | — | ||
| Supply of LED Street Light Fitting 36 watt complete as per detailed technical specifications attached. | — | — | — | 72,900 | |
| — | 331.00 | — | — | ||
| Installation of LED Light Fitting as per detailed technical specifications attached. | — | — | — | 99,597.9 | |
| — | 24900.00 | — | — | ||
| Laying of 4 core circular armoured ISI marked XLPE cable size 4 core aluminum conductor 1100 volt with connection etc. Note: Cable will be supplied by Railway. | — | — | — | 6,33,954 | |
| — | 1650.00 | — | — | ||
| Digging of trench in pucca trench in yard /platform 50cm. deep and 35cm. wide including replaster on surface by cement oncrete after laying of cable. | — | — | — | 3,74,368.5 | |
| — | 13700.00 | — | — | ||
| Digging of trench in all type of soils/road cutting 100 cm. deep and 50cm. wide including supply and laying of "B" class bricks on both side & top of the cable and refilling the trench after laying of cable. | — | — | — | 19,50,058 | |
| — | 600.00 | — | — | ||
| Drilling of Horizontal bore below track/road by pushing method for laying of HDPE/DWC pipe of various size. | — | — | — | 27,88,146 | |
| — | 650.00 | — | — | ||
| Supply of material, providing, commissioning and laying of DWC/HDPE pipe of 160/138 mm dia cabling under road/track. As per explanatory notes. | — | — | — | 4,19,640 | |
| — | 70.00 | — | — | ||
| Supply of heavy-duty ISI marked B class GI pipe of 3.65 mm wall thickness & 50 mm diameter to be laid along the wall or floor with proper galvanized clamp through the wall or underneath the floor in cement concrete. | — | — | — | 23,196.6 | |
| — | 70.00 | — | — | ||
| Laying & fixing of heavy-duty ISI marked B class GI pipe of 3.65 mm wall thickness & 50 mm diameter to be laid along the wall or floor with proper galvanized clamp through the wall or underneath the floor in cement concrete. | — | — | — | 5,740 | |
| — | 11.00 | — | — | ||
| Supply of heavy-duty ISI marked B class GI pipe of 80 mm diameter with suitable clamps on rail/pole/joists with nut/bolts and GI socket as per site requirement. | — | — | — | 5,353.15 | |
| — | 11.00 | — | — | ||
| Laying & fixing of heavy-duty ISI marked B class GI pipe of 80 mm diameter with suitable clamps on rail/pole/joists with nut/bolts and GI socket as per site requirement. | — | — | — | 1,320 | |
| — | 320.00 | — | — | ||
| Supply of material of RCC hume pipe 6" dia (150mm) as per IS: 456-1978 or latest in existing trench under Railway track including jointing and all required accessories etc. | — | — | — | 1,42,028.8 | |
| — | 320.00 | — | — | ||
| Laying of RCC hume pipe 6" dia (150mm) as per IS: 456-1978 or latest in existing trench under Railway track including jointing and all required accessories etc. | — | — | — | 31,040 | |
| — | 1250.00 | — | — | ||
| Digging of the trench and refilling after laying of pipe under track at the depth of 1 meter from the formation level etc. | — | — | — | 1,96,525 | |
| — | 199.00 | — | — | ||
| Supply of material & providing GI. pipe earthing arrangement by digging the pit as per DRM/KTT's Drg. No. 01913EL/R1 or latest complete in all type of soils including rocky area. Earth value will be taken by the contractor in the presence of Railway representative and written on the earth pit by the contractor. | — | — | — | 5,62,505.34 | |
| — | 10.00 | — | — | ||
| Supply of material and providing of copper plate Earthing arrangement by digging the Pit. Copper Plate size 600 X 600 X 3 mm as per drg.No.DRM/KOTA/01927/ELR. | — | — | — | 1,08,914.3 | |
| — | 16.00 | — | — | ||
| Supply of material & Erection of Maintenance Free Earth Electrodes station as per RDSO Specification No. RDSO / Spn. / 197 / 2008 or latest.Earth value will be taken by the contractor in the presence of Railway representative and written on the earth pit by the contractor. | — | — | — | 2,24,570.88 | |
| — | 10.00 | — | — | ||
| Supply & fabrication of LT distribution board fabricated With M.S. angle size 40 x 40 x 3 mm with door & locking arrangement duly painted red oxide & powder coated enamel Paint consisting of following items. Incoming - MCCB TPN 100 Amp. Breaking cap. 35 KA - 01 No. Outgoing - MCB 63 Amp. TPN - 02 Nos. | — | — | — | 1,44,347.8 | |
| — | 10.00 | — | — | ||
| Installation, testing & commissioning of LT distribution board fabricated With M.S. angle size 40 x 40 x 3 mm with door & locking arrangement duly painted red oxide & powder coated enamel Paint consisting of following items. Incoming - MCCB TPN 100 Amp. Breaking cap. 35 KA - 01 No. Outgoing - MCB 63 Amp. TPN - 02 Nos. | — | — | — | 16,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Clarification for Annexure V
ATTACHMENT
GCC_April-2022_Final.pdf
ATTACHMENT
Annexure of LC
ATTACHMENT
MakeinIndiapolicylatestamendment.pdf Make in India policy latest amendme
ATTACHMENT
Technical Specifications of LED
ATTACHMENT
GCCAdvanceCorrectionSlipNo11.pdf
ATTACHMENT
Annexure-E.pdf
ATTACHMENT
DempoymentofEngineers.pdf
ATTACHMENT
TSEL-50-312-2026-27.pdf
ATTACHMENT
CorrectionslipofGCC.pdf
ATTACHMENT
AnnexureLC-Inclusionofletterofcredit.pdf
ATTACHMENT
Clarification-Annexure-VofGCCwithTenders..pdf
ATTACHMENT
SpecificationofLEDLuminare-2026-1.pdf
ATTACHMENT
MakeinIndiapolicylatestamendment.pdf
ATTACHMENT
Corrigendum312.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .