SITC of AC Machine in the Dissection Hall and Doctors Duty Room at the Dept. Of FMT Mortuary in the North Bengal Medical College and Hospital.

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]

Average run 9 mtr

On Board

Supply & Delivery of 230V, 1-Ph, AC ceiling fan of follwing size incl. all accessories. (Make- Crompton / Usha / Orient/ Polar) [BEE star rated]

Sweep Size- 1200 mm (48"), Wattage ≤ 55 Watt, R.PM ≤ 350, Air Delivery ≥ 220 C.M.M

Supply and Delivery of 4 feet Industrial box type double LED tube batten/ mounting rail (rust free) suitable for single TLED lamp. [Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate]

Supply & Delivery of 240V, 18/ 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Distribution wiring in 1.1 KV single core stranded 'FR'PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Supplying and Drawing 1.1 KVgrade Four (4) core 6 sq mm 'FR' PVC insulated & unsheathed copper cable as 3 phase & Neutral S & F, 32 mm dia U-PVC Rigid pipe in and making necy. connection as required from VTPNDB to Starter to out door unit for Concealed split.[ Make:KEI/ Havells/ Polycab/RR Kabel/ Finolex]

Supplying and Drawing 1.1 KVgrade Two (2) core 2.5 sq mm 'FR' PVC insulated & unsheathed copper cable as double earth & S & F, 20 mm dia U-PVC Rigid pipe in and making necy. connection as required from VTPNDB to starter to out door unit. as earth [ Make:KEI/ Havells/ Polycab/RR Kabel/ Finolex]

Supply and Fixing of 6 Module watherproof cabinets IP-65 -IK 09- Class II , reversible door consisting 2 position rail PVC box with supplying and fixing 32 A FP MCB Isolator on din rail of existing DBs and necessary connection.( Make- Legrand, Cat No- 601996)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes

4 x 6 sq. mm. + 2 x 2.5 sq. mm.

SITC of 7.5 TR capacity concealed type split Air Conditioner of rated cooling capacity of 90000 BTU/hr with 3 nos twin rotary compressor , 3 nos IDU of rated power suplly 230V-1Ph-50 Hz, 1no ODU of rated power supply -400V, 3Ph-50Hz. Air flow/per IDU-1000CFM(Make- Hitachi/O-General/Mitsubishi/Daikin)

Supply, installation & Commissioning of hard/soft copper refrigerent pipe line with 9mm nitral rubber insulation and Al foil tape complete with fittings,elbows bends, supporting arrangements on wall (Make- Ryoku/Rajco/Nippon)

Liquid Line(3/8" OD with 0.6mm thick)

Suction Line(5/8" OD with 0.7mm thick)

Suppying , Fabricating & Fixing MS u- Channel of 6mm thick of Size (75mmx40mmx40mm) for making platform for Installation of outdoor unit of 7.5 TR Concealed split ACI Incl. drilling 2 nos holes in each channel incl. cutting holes into the wall & grouting the same with cement concreate(1:1 1/2:3)e etc. fabricated with horizontal angle of 25mm x25mm x6mm incl. supporting angle 50mmx50mmx6mm in each platform. The platform should be fabricated & safe for ODU Maintenance . Area of the platform is 3mtr x1.2 Mtr or as per Machine configuration & load with adequate service access as per direction of EIC.

Suppying , Fabricating & Fixing of Iron structure made by 25x 6 mm thick MS flat of Size 3x1.5mtrx1.5mtr or as site requirement for protection (Cagging Arrangement) the outdoor unit to avoid theft incl. locking arrangement with supply Godrej Novtal & painting the same by 2 codes of synthetic enamel paint over one coat of RO primer as per direction of EIC.

Cabling from Outdoor unit to Indoor Unit 4 core 2.5sqmm communication cu cable

DRAIN PIPING Supply & laying drain Water piping work out of UPVC/ HDPE hard pipes (Make HB / Supreme / Oriplast) incl. fitting , accessories bends, elbows, tees, flanges, tapings, etc. (19mm dia/25 mm dia)

M/S. P K ENTERPRISE (BID ID -6612512)

RAJESH ENTERPRISE (BID ID -6612498)