SR to Repairing/Renovation of Guest House at Tankara ( By providing Toilet Renovation, Vitrified Tiles, Plaster, color, Door-Window etc.)

Name of Work :-SR to Repairing/Renovation of Guest House at Tankara ( By providing Toilet Renovation, Vitrified Tiles, Plaster, color, Door-

=// Bill of Quantities //-

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

1 8.00 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats Each 192.09 Rupees One Hundred Estimated

architraves, holdfasts and other attachment etc. complete and stacking them within all lead Ninety Two Paise Nine Only

and lift.(i) Not exceeding 3 Sq.M. in area.

2 25.00 Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing Each 414.23 Rupees Four Hundred

tank etc. including stacking the materials with all lead and lift. Fourteen Paise Twenty

3 3.00 Demolition of Brick work and stone masonry including stacking of serviceable materilas Cum 562.89 Rupees Five Hundred Sixty

and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar. Two Paise Eighty Nine Only

4 2188.00 Removing dry or oil bound distemper by a washing and scraping and sand papering the wall Sqm 11.53 Rupees Eleven Paise Fifty

surface smooth including necessary repairs to scratches complete. Three Only

5 603.00 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas SqM 49.12 Rupees Fourty Nine Paise

and disposal of unserviceable materials with all lead and lift. Twelve Only

6 361.00 Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C SqM 19.89 Rupees Nineteen Paise

member including stacking of serviceable material and disposal of unserviceable from site Eighty Nine Only

of work with all lead and lift.

7 625.00 Applying general insecticide pest control treatment to floors, cupboards etc including labour SqM 91.63 Rupees Ninety One Paise

material etc. complete. Using Heptachloride 20 EC. As Per 6113_pests Consentration Sixty Three Only

Weight 0.50 percent is recommended one litre chemical emulsion dillute with 39 liter of

water will give. Total dillute concrentration will be 40 litre inclusive of one litre chemical

emulsion appication 0.5 Litre chemical / Sqm of surface is recommended as per I.S

8 3.00 Brick work using common burnt clay building bricks having crushing strength not less than Cum 4526.81 Rupees Four Thousand Five

35 kg./Sq.Cm. in superstructure in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Hundred Twenty Six Paise

Conventional Eighty One Only

9 92.00 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior SqM 108.58 Rupees One Hundred Eight

plastering upto floor two level and inished even and smooth in (iii) Cement mortar 1:6 Paise Fifty Eight Only

(1-cement:6-sand)

10 270.00 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half SqM 141.48 Rupees One Hundred

brick walls for interior plastering upto floor two level and finished even and smooth in (iii) Fourty One Paise Fourty

Cement mortar 1:6 (1-cement:6-sand) Eight Only

11 186.00 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level SqM 315.69 Rupees Three Hundred

consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick Fifteen Paise Sixty Nine

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Only

12 1445.00 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of SqM 40.59 Rupees Fourty Paise Fifty

approved brand and manufacture on new wall surface to give an even shade including Nine Only

thoroughly brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

13 1445.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on SqM 84.37 Rupees Eighty Four Paise Estimated

undecorated wall surface to give an even shade including throughly brushing the surface Thirty Seven Only

free from mortar droppings and other foreign matter and sand papered smooth.

14 744.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to SqM 120.26 Rupees One Hundred

give an required shape even shade after thoroughly brushing the surface to remove all dirt, Twenty Paise Twenty Six

and remains of loose powdere materials.etc complete Only

15 76.00 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 72.65 Rupees Seventy Two Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Sixty Five Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

16 56.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt. 91.84 Rupees Ninety One Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Eighty Four Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

17 60.00 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt. 148.12 Rupees One Hundred

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Fourty Eight Paise Twelve

wall with the help of clamp at every two metre C/C or shall be concealed as directed Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

18 60.00 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt. 195.67 Rupees One Hundred

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Ninety Five Paise Sixty

wall with the help of clamp at every two metre C/C or shall be concealed as directed Seven Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

19 70.00 Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) Rmt. 834.38 Rupees Eight Hundred

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, Thirty Four Paise Thirty

& fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, Eight Only

pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every

mm center to center or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

20 55.00 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) Rmt. 876.90 Rupees Eight Hundred

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, Seventy Six Paise Ninety

& fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, Only

pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every

mm center to center or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

21 70.00 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene Rmt. 280.23 Rupees Two Hundred Estimated

pipes of the following outside Dia. Low densidy, complete with special falnge compression Eighty Paise Twenty Three

type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm Only

22 5.00 Providing and fixing in position cowel went to pipes.(B) 75mm dia. Each 393.04 Rupees Three Hundred

23 5.00 Providing and fixing in position cowel went to pipes.(C) 100mm dia Each 505.17 Ninety Three

Rupees Paise FourFive

24 11.00 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. Each 89.83 Paise Seventeen Only Paise

Rupees Eighty Nine

25 12.00 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali Each 586.27 Eighty Three

Rupees FiveOnlyHundred

of the following nominal diameter of self cleansing design with C.I scread down or hinged Eighty Six Paise Twenty

grating including the cost of cutting and making good the walls. Seven Only

26 25.00 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated Each 186.83 Rupees One Hundred

screws down Bib Tap. (i) 15mm dia. Eighty Six Paise Eighty

27 10.00 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, Each 354.69 Rupees Three Hundred

shanks and back nuts. (ii) 20mm dia. Fifty Four Paise Sixty Nine

28 20.00 Providing and fixing brass screw down stop tap.(A) 15mm dia. Each 205.83 Rupees Two Hundred Five

29 10.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia Each 186.83 Paise Eighty

Rupees OneThree Only

30 10.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Each 420.63 Eighty Six Paise Eighty

Rupees Four Hundred

31 2.00 Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm Each 987.14 Twenty Paise

Rupees NineSixty Three

(Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Eighty Seven Paise

Vitreous China.(I) Long pattern = White colour Fourteen Only

32 12.00 Providing and fixing chromium plated brass half trun flush cock of approved quality Each 254.78 Rupees Two Hundred Fifty

including fixing in pipe line etc. complete.(i) 20mm dia. Four Paise Seventy Eight

33 8.00 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on Each 859.41 Rupees Eight Hundred Fifty

6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws Nine Paise Fourty One Only

34 10.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets Each 1581.77 Rupees One Thousand Five

painted white including sutting holes and making good the same but excluding fittings.(A) Hundred Eighty One Paise

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. Seventy Seven Only

35 4.00 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S Each 1356.81 Rupees One Thousand

trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) Three Hundred Fifty Six

(Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in Paise Eighty One Only

36 3000.00 Providing erecting and fixing double coated ISI water tank of required capacity each with all Lit 3.95 Rupees Three Paise Ninety

necessary fittings and connection etc. complete on terrace. Five Only

37 29.00 Providing and laying Mirror polished Machine polished Granite stone slab 18 mm SqM 3143.12 Rupees Three Thousand

(Average) thick for For Doors / WIndows cill & Jams Clading as per design incl. full One Hundred Fourty Three

moulded round front edge in trade of steps laid on 20 mm thick cement mortar 1:6 (1 - Paise Twelve Only

cement : 6 coarse sand ) jointed with grey cement slurry including rubbing and polishing

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

38 232.00 Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on SqM 1127.48 Rupees One Thousand One Estimated

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement Hundred Twenty Seven

slurry Paise Fourty Eight Only

39 343.00 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps SqM 1120.36 Rupees One Thousand One

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) Hundred Twenty Paise

finishing with flush pointing in white cement. Thirty Six Only

40 44.00 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on SqM 1017.30 Rupees One Thousand

a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush Seventeen Paise Thirty

pointing in white cement. Only

41 55.00 Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo SqM 1144.15 Rupees One Thousand One

and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed Hundred Fourty Four Paise

with gray cement slury mixed with pigment to match the shade of slab including rubbing Fifteen Only

and polishing etc. complete.

42 7.00 Providing and fixing 35 mm thick SINGLE SHUTTER FLUSH DOOR using Shutters with SqM 5187.36 Rupees Five Thousand One

both size Decorative 1 mm thick Laminated, pattern and design is to be approved by the Hundred Eighty Seven

Architect, with Stainless Steel handle size 30 Cm Long, Tower Bolt size 15cm, & Heavy Paise Thirty Six Only

Stainless steel Aldrop as per detailed drawing / as directed.

43 16.00 Providing and fixing 3 track Aluminium frame Window with two glass sliding shutters & 1 SqM 4452.69 Rupees Four Thousand

mosquito net shutter and fixed window frame size 63.55 mm. x 38.10 mm. having weight Four Hundred Fifty Two

1.094 Kg./ Mt. shutter frame vertical size 44.45 mmm. x 47.62 mm having weight 1.505 Kg. Paise Sixty Nine Only

/ Mt. and horizontal size 63.50 x 38.10 mm. having weight 1.608 Kg. / Mt. with 5 mm. thick

plain glass or 12 mm. thick Bison panel with necessary closer, fixtures and fastening rubber

biding clips etc. complete.

44 3.00 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x SqM 1175.56 Rupees One Thousand One

1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium frame for ventilation Hundred Seventy Five Paise

with 5 mm thick frosted glass as details etc complete for Ventilation Fifty Six Only

45 12.00 Providing and Fixing Roof panel shall be made out of 0.5 mm thick precoated sheet. The SqM 1643.27 Rupees One Thousand Six

precoated sheet shall be of minimum 240mpa steel grade conforming to IS 14246-1995 and Hundred Fourty Three Paise

shall have zinc coating of minimum 120 gsm as per IS 277-1992, 5-7 microns epoxy Twenty Seven Only

46 1.00 High Back chair :- Providing High back executive chair,with soft foam PU. handle,hot No 21033.25 Rupees Twenty One

pressed bend ply in seat and back,ergonomically design with natural shape of spine Thousand Thirty Three

supporting tire back of the user and provide good plumber support .upholstered with 40 Paise Twenty Five Only

density PU foam in seat and back .Bottom 38 mm dai * 1.63 mm thick CR pipe used in five

prone stand with good quality nicke l chrome of 30 to 35 micron.Synchro - tilt mechanism

made from MS sheet 2.5 , 3.5 ,4 mm thickness duly powder coated 40 to 50 micron. Single

position lock and with gas lift operating system size 675 x 675 x 7165 seat height .440/540

mm and sample approved as directed by the Engineer in charge.

47 9.00 Providing cooking platform of 60 cm. width and 70 cm. height including 25 mm. thick side Sqm 5027.78 Rupees Five Thousand

polished Kota Stone vertical and horizontal support and including fixing of steel sink Twenty Seven Paise

cutting in plateform as per design including cost of cement (Using granite stone over Kota Seventy Eight Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

48 730.00 Painting one coats (excluding priming coat) on previously painted steel and other metal Sqm 57.80 Rupees Fifty Seven Paise Estimated

surface with enamel paint, brushing to give an even shade including cleaning the surface of Eighty Only

all dirt, dust and other foreign matter

49 24.00 Reapirs and Re-fitting of doors, window and Cup Board shutters by providing necessory Sqm 1313.05 Rupees One Thousand

non teak wood member, glass/Acrylic sheet and necessry hardware fitting and including Three Hundred Thirteen

touching the new member by matching existing oil painting, shed etc. complete as directed Paise Five Only

including all cost of labour and materials.

50 6.00 Providing and fixing Terracotta Jaali Bricks fixing in proper line and level, filling the joint Sqm. 2204.53 Rupees Two Thousand Two

with a synthetic adhesive or a cement-based adhesive suitable for highly absorbent Hundred Four Paise Fifty

materials, etc. complete as per direction of Engineer in charge. Manufactures specification Three Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

51 1.00 Providing And Arranging table top 37mm thick made from 18mm thick RA grade plywood No 14831.85 Rupees Fourteen Thousand Estimated

with 1mm thick laminate finish. Leg & frame to made from 50mm x 50mm x 1.6mm & Eight Hundred Thirty One

50mm x 25mm x 1.8mm size CRC pipe powder coated 50 micron finish with levelar Paise Eighty Five Only

Appron 18mm thi

Amount in Words :

Rupees Nineteen Lakh Four Hundred Twenty Three Paise Fourty Seven Only

I / We am/are willing to carry out the work at ......................................................………………... % above / below (Should

be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

Estimated amount Estimated amount

Put to tender Rs. …………………… Put to tender Rs…………………..

Add……….. % above Rs. …………………… Deduct…….% below Rs…………………..

Total Rs. …………………… Net Rs…………………..

In words……………………………… In words……………………………………….

[1] The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

[2] The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

[3] GST and Income tax TDS will be deducted at a source while making payments of bills

[4] In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of

input rate mentioned in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division