CONSTRUCTION OF GANNA PRASHIKSHAN KENDRA BUILDING (G+1) AT HARSIDDHI BLOCK IN THE DISTRICT OF EAST CHAMPARAN FOR THE YEAR-2025-26.

BILL OF QUANTITY FOR

CONSTRUCTION OF GANNA PRASHIKSHAN KENDRA BUILDING (G+1) AT HARSIDDHI BLOCK IN THE DISTRICT OF EAST CHAMPARAN FOR THE YEAR-2025-26.

BOQ AMOUNT Rs- 46,929,106.00

Earnes Money Rs- 939,000.00

Cost of BOQ Rs- 10,000.00

Time of Completion 09 Months

Sl. No. SOR-Ref. 2022 Item of Works Main Bld Plumbing & Sanitary Septic Tank & Soak pit RWH Tubwell & Boring A/Road B/Wall UG Tank Ext. PHE Drain D1 Drain D2 Drain D3 Drain Cover Ext Phe (Including Tand) Horticulture Total Qty Unit Rate Amount

EARTH WORK Main BLD Plumbing & Sanitary SEPTIC TANK RWH Tube Well Boring App Road B/Wall UG TANK W/Supp & Sewrage D1 d2 d3 drain Exter PHE Harticulers

1 2.6.1 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. 38.00 0.00 38.00 m3 314.90 11966 1 0 0 0 0 0 0 0 11966 0 0 0 0 0 0

2 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All Kinds of soil 605.89 45.58 207.87 34.00 20.00 25.65 79.65 18.20 957.19 m3 360.70 345257 1 218545 0 16441 0 0 0 74977 0 0 12264 7214 9252 0 6565

3 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 343.96 136.98 38.00 0.00 518.94 m3 123.90 64296 1 42617 0 0 0 0 0 16971 4708 0 0 0 0 0 0

4 2.27.1 Extra for every additional lift of 1.5 m or part thereof in : Ali kinds of soil 151.47 15.00 0.00 166.47 m3 49.40 8224 1 7483 0 0 0 0 0 0 741 0 0 0 0 0 0

5 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 342.07 1.14 50.34 19.01 1.00 3.50 1.80 1.35 6.65 420.20 m3 287.30 120724 1 98276 0 328 0 0 14463 5460 287 0 1006 517 388 0 0

6 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes,royalty, all complete as per building specifications and direction of E/I 853.17 14.87 143.22 15.00 54.00 24.00 18.00 96.00 1122.26 m2 283.30 317935 1 241703 0 4213 0 0 0 40573 4250 0 15298 6799 5099 0 0

7 11.73 Providing designation 100 A one brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 330.11 0.00 330.11 m2 444.80 146834 1 0 0 0 0 0 146834 0 0 0 0 0 0 0 0

CEMENT CONRETE WORK & REINFORCED CEMENT CONCRETE WORK 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

8 4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

4.1.2 1:1.5:3 (1 Cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 50.34 0.00 50.34 m3 4420.80 222543 1 0 0 0 0 0 222543 0 0 0 0 0 0 0 0

9 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4 (1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 71.33 1.91 8.25 4.00 3.00 2.17 9.18 90.67 m3 3998.10 362510 1 285204 0 7636 0 0 0 32987 0 0 15992 11994 8696 0 0

10 4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1.00 5.50 3.60 2.70 11.80 12.80 m3 2975.20 38083 1 0 0 0 0 0 0 0 2975 0 16364 10711 8033 0 0

4.1.5 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 5.20 5.20 m3 3434.00 17857 0 0 0 0 0 0 0 0 0 17857

4.1.8 1:3:6 (1 Cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

11 4.11 Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4(1cement:2:2 coarse sand :4 graded stone aggregate 20mm nominal size) 25.50 0.00 25.50 m2 245.60 6263 1 6263 0 0 0 0 0 0 0 0 0 0 0 0 0

12 4.12 Extra for providing and mixing water prooding material in cement concrete work in the proportion recommended by the manufacturers 149.00 0.00 149.00 m2 57.16 8517 1 0 0 0 0 0 0 0 8517 0 0 0 0 0 0

13 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 0.05 15.00 15.00 15.05 m3 4688.30 70559 1 0 0 234 0 0 0 0 0 0 0 0 0 70325 0

14 5.33A.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete 2.39 16.00 0.00 18.39 m3 4756.90 87479 1 0 0 11369 0 0 0 0 76110 0 0 0 0 0 0

15 5.33.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0

(i) 5.33.1.1 All works up to plinth level 1:1:2 (1 cement: 1 coarse sand: 2 graded stone aggregate 20 mm nominal size) 219.83 55.29 0.00 275.13 m3 5063.40 1393071 1 1113109 0 0 0 0 0 279962 0 0 0 0 0 0 0

(ii) 5.33.2 Concrete of M-25 grade with minimum cement content of 330 kg/cum 257.18 36.20 0.00 293.38 m3 5863.20 1720170 1 1507898 0 0 0 0 0 212272 0 0 0 0 0 0 0

16 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

17 5.9 Centering and Shuttering 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

(i) 5.9.1 Centring and shuttering including strutting,propping etc. and removal of form for. Foundation & base of column footng 358.54 65.35 4.00 55.00 24.00 41.25 120.25 548.14 m2 211.60 115986 1 75867 0 0 0 0 0 13828 846 0 11638 5078 8729 0 0

(ii) 5.9.2 Centring and shuttering including strutting,propping etc. and removal of form for. 79.16 74.00 0.00 153.16 m2 375.10 57450 1 29693 0 0 0 0 0 0 27757 0 0 0 0 0 0

(iii) 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for. Suspended floors, roofs, landings, balconies and access platform. 863.00 19.57 25.00 99.90 99.90 1007.47 m2 437.50 440768 1 377563 0 8562 0 0 0 0 10938 0 0 0 0 43706 0

(iv) 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for. Lintels, beams, plinth beams, griders, bressumers and contilevers. 953.42 1.55 159.51 0.00 1114.48 m2 404.70 451031 1 385849 0 627 0 0 0 64554 0 0 0 0 0 0 0

(v) 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for.Columns,Pillars, Piers, Abutments, Posts and Struts 562.32 440.44 0.00 1002.76 m2 494.40 495766 2 278011 0 0 0 0 0 217755 0 0 0 0 0 0 0

(vi) 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for.Stairs,(excluding landings) except spiral-staircaces. 56.82 0.00 56.82 m2 439.90 24995 1 24995 0 0 0 0 0 0 0 0 0 0 0 0 0

(vii) 5.9.16 Centring and shuttering including strutting, propping etc. and removal of form for.Edges of slabs and breaks in floors and walls- 304.69 32.00 0.00 336.69 m2 130.20 43837 1 39671 0 0 0 0 0 0 4166 0 0 0 0 0 0

(viii_ 5.9.19 Centring and shuttering including strutting, propping etc. and removal of form for.Weather shade,Chajjas, corbels etc. including edges 30.92 0.00 30.92 m2 550.90 17034 1 17034 0 0 0 0 0 0 0 0 0 0 0 0 0

18 6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in Cement mortar 1 .:4 (1 cement: 4 coarse sand ) 10.88 9.00 6.20 4.65 19.85 30.73 m3 5017.90 154200 1 0 0 54595 0 0 0 0 0 0 45161 31111 23333 0 0

19 6.1.12C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :Cement mortar 1.:6 (1 cement: 6 coarse sand ) 5.14 5.00 0.00 9.50 19.64 m3 5116.30 100484 1 0 0 26298 0 0 0 0 25582 0 0 0 0 0 48605

20 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :Cement mortar 1.:6 (1 cement: 6 coarse sand ) 24.42 0.00 24.42 m3 4923.00 120242 1 120242 0 0 0 0 0 0 0 0 0 0 0 0 0

21 6.1.14C +6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :Cement mortar 1.:6 (1 cement: 6 coarse sand )+Extra for brick work in superstructure above floor V level for each four floors or part thereof. 203.56 0.00 203.56 m3 5765.20 1173590 1 1173590 0 0 0 0 0 0 0 0 0 0 0 0 0

22 6.1.12C +6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :Cement mortar 1.:6 (1 cement: 6 coarse sand )+Extra for brick work in superstructure above floor V level for each four floors or part thereof. 39.09 0.00 39.09 m3 5958.50 232941 1 0 0 0 0 0 0 232941 0 0 0 0 0 0 0

DOORS AND WINDOWS 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

23 26.86.4 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent 166.50 0.00 166.50 m 908.60 151282 1 151282 0 0 0 0 0 0 0 0 0 0 0 0 0

24 26.87.2 Providing and fixing factory made single extruded WPC {WoodPolymer Composite} solid plain flush door shutter of required sizecomprising of virgin polymer of K value 58-60 Suspension Grade),calcium carbonate and natural fibers {wood powder/ rice husk/wheathusk) and non toxic additives {maximum toxicity index of 12 for 100gms) having minimum 45.72 0.00 45.72 m2 4468.60 204304 1 204304 0 0 0 0 0 0 0 0 0 0 0 0 0

25 9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm,made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. 44.55 0.00 44.55 m 379.40 16902 1 16902 0 0 0 0 0 0 0 0 0 0 0 0 0

26 9.118.3 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. An M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with 5.85 0.00 5.85 m2 2450.50 14335 1 14335 0 0 0 0 0 0 0 0 0 0 0 0 0

27 9.147D.4 Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double 64.80 0.00 64.80 m2 9083.30 588598 1 588598 0 0 0 0 0 0 0 0 0 0 0 0 0

28 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 1150.82 0.00 1150.82 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

9.48.2 Fixed to openings/ wooden frames with rawl plugs screws etc 1150.80 4208.97 0.00 5359.77 Kg 161.10 863459 1 185394 0 0 0 0 0 678065 0 0 0 0 0 0 0

29 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer 14.40 0.00 14.40 m2 6303.40 90769 1 90769 0 0 0 0 0 0 0 0 0 0 0 0 0

30 10.32 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required 75.00 0.00 75.00 m2 114.60 8595 1 0 0 0 0 0 0 0 8595 0 0 0 0 0 0

31 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 359.00 0.00 359.00 Kg 546.80 196301 1 196301 0 0 0 0 0 0 0 0 0 0 0 0 0

32 10.5.1 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer. 2.21 0.00 2.21 m2 3653.00 8073 1 8073 0 0 0 0 0 0 0 0 0 0 0 0 0

33 9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 313.00 0.00 313.00 no 130.80 40940 1 40940 0 0 0 0 0 0 0 0 0 0 0 0 0

34 9.71.2 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete:100x60x2.50 mm 313.00 0.00 313.00 No 74.90 23444 1 23444 0 0 0 0 0 0 0 0 0 0 0 0 0

35 9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. 39.00 0.00 39.00 no 108.10 4216 1 4216 0 0 0 0 0 0 0 0 0 0 0 0 0

36 9.96 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

37 9.97 Providing and fixing alluminium sliding tower bolt anodised(anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with nuts and screws etc. complete: 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

38 9.100 Providing and fixing alluminium aluminium handles ,ISImarked,anodisd (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with nuts and screws etc. complete: 0.00 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

39 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 186.78 0.00 186.78 m2 795.00 148490 1 148490 0 0 0 0 0 0 0 0 0 0 0 0 0

40 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturer) of ist quality conforming to IS :15622 of approved make in colours such as white , Ivory , Grey , FumeRed , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 52.07 0.00 52.07 m2 686.80 35762 1 35762 0 0 0 0 0 0 0 0 0 0 0 0 0

41 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete 599.70 0.00 599.70 m2 1638.80 982788 1 982788 0 0 0 0 0 0 0 0 0 0 0 0 0

42 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick 65.61 0.00 65.61 m2 1191.80 78194 1 78194 0 0 0 0 0 0 0 0 0 0 0 0 0

43 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) 75.45 0.00 75.45 m2 1252.70 94516 1 94516 0 0 0 0 0 0 0 0 0 0 0 0 0

44 13.11.1 Cement plaster in course sand 12 mm cement plaster 1:3(1 cement :3 coarse sand) 60.00 0.00 60.00 m2 164.30 9858 1 0 0 0 0 0 0 0 9858 0 0 0 0 0 0

46 13.24 Providi g 6 mm cement plaster to ceiling of mix :

48 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement 203.55 0.00 203.55 m2 203.60 41443 1 41443 0 0 0 0 0 0 0 0 0 0 0 0 0

49 13.17.2 12 mm cement plaster 1:4( 1 cement: 3 coarse sand) finished with a floating coat of neat cement 43.34 0.00 43.34 m2 192.20 8330 1 0 0 8330 0 0 0 0 0 0 0 0 0 0 0

50 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. 1.00 1.00 1.00 2.00 Each 33603.40 67207 1 0 0 33603 0 0 0 0 0 33603 0 0 0 0 0

51 13.18 15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall. 48.00 0.00 48.00 m2 229.30 11006 1 0 0 0 0 0 0 0 11006 0 0 0 0 0 0

53 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 3227.05 0.00 3227.05 m2 105.40 340131 1 340131 0 0 0 0 0 0 0 0 0 0 0 0 0

54 13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm. 3227.05 0.00 3227.05 m2 117.30 378533 1 378533 0 0 0 0 0 0 0 0 0 0 0 0 0

55 13.78.1 Applying one coat of cement primer of approved brand and manufacture on wall surface 0.00 140.00 140.00 m2 38.60 5404 1 0 0 0 0 0 0 0 0 0 0 0 0 0 5404

56 13.79.1 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade 0.00 140.00 140.00 m2 81.20 11368 1 0 0 0 0 0 0 0 0 0 0 0 0 0 11368

57 13.79.1+ 13.78.1 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Applying one coat of cement primer of approved brand and manufacture on wall surface 742.39 0.00 742.39 m2 119.80 88938 1 0 0 0 0 0 0 88938 0 0 0 0 0 0 0

58 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 157.85 176.62 0.00 334.47 m2 83.50 27929 1 13180 0 0 0 0 0 14748 0 0 0 0 0 0 0

59 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions. (ii) 2nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) 3rd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) 4th course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). 92.14 0.00 92.14 m2 480.60 44282 1 44282 0 0 0 0 0 0 0 0 0 0 0 0 0

60 22.8.1 Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water -proofing compound 482.83 0.00 482.83 m2 850.70 410743 1 410743 0 0 0 0 0 0 0 0 0 0 0 0 0

61 22.20.1 Providing and laying APP (Atactic Polypropylene Polymer) modifiedprefabricated five layer 3 mm thick water proofing membrane, blackfinished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. 482.83 0.00 482.83 m2 472.50 228137 1 228137 0 0 0 0 0 0 0 0 0 0 0 0 0

62 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, 112.00 0.00 112.00 m 1087.90 121845 1 121845 0 0 0 0 0 0 0 0 0 0 0 0 0

63 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 31.00 0.00 31.00 m 165.40 5127 1 5127 0 0 0 0 0 0 0 0 0 0 0 0 0

64 12.45.4 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate 124.09 0.00 124.09 m2 1175.60 145880 1 145880 0 0 0 0 0 0 0 0 0 0 0 0 0

66 17.1.1 Providing & fixing White Vitreous china Orissa pattern W.C.Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 3.00 0.00 3.00 each 4470.90 13413 1 0 13412.7 0 0 0 0 0 0 0 0 0 0 0 0

67 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. 5.00 0.00 5.00 each 5504.30 27522 1 0 27521.5 0 0 0 0 0 0 0 0 0 0 0 0

68 17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 7.00 0.00 7.00 each 2764.40 19351 1 0 19350.8 0 0 0 0 0 0 0 0 0 0 0 0

69 17.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 2.00 0.00 2.00 each 1500.00 3000 1 0 3000 0 0 0 0 0 0 0 0 0 0 0 0

71 17.23 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 3.00 0.00 3.00 each 1024.90 3075 1 0 3074.7 0 0 0 0 0 0 0 0 0 0 0 0

71 17.28.1.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi Rigid Pipe. 32 mm dia. 9.00 0.00 9.00 each 91.00 819 1 0 819 0 0 0 0 0 0 0 0 0 0 0 0

72 17.30 Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. 2.00 0.00 2.00 Each 45.30 91 1 0 0 0 0 0 0 0 91 0 0 0 0 0 0

73 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 9.00 0.00 9.00 each 1068.50 9617 1 0 9616.5 0 0 0 0 0 0 0 0 0 0 0 0

74 17.35.1.1 1Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS : 1729 6.00 0.00 6.00 Mtr 978.30 5870 1 0 0 0 0 0 0 0 5870 0 0 0 0 0 0

75 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms 9.00 0.00 9.00 each 424.00 3816 1 0 3816 0 0 0 0 0 0 0 0 0 0 0 0

76 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

77 18.9.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External Work 40 mm nominal outer dia Pipes 35.00 0.00 35.00 m 477.60 16716 1 0 16716 0 0 0 0 0 0 0 0 0 0 0 0

78 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 0 0 0 0 0 0 0 0 0 0 0 0 0

79 18.15.2 1Providing and fixing brass bib cock of approved quality : 20 mm nominal bore 3.00 3.00 3.00 Each 328.00 984 2 0 0 0 0 0 0 0 0 984 0 0 0 0 0

80 18.16.2 Providing and fixing brass stop cock of approved quality : 20 mm nominal bore 2.00 2.00 2.00 Each 328.00 656 1 0 0 0 0 0 0 0 0 656 0 0 0 0 0

81 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 0 0 0 0 0 0 0 0 0 0 0 0

(i) 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore. 4.00 0.00 4.00 each 532.30 2129 1 0 2129.2 0 0 0 0 0 0 0 0 0 0 0 0

82 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore. 4.00 0.00 4.00 each 399.20 1597 1 0 1596.8 0 0 0 0 0 0 0 0 0 0 0 0

83 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

84 18.21.2.2 Providing and fixing uplasticised PVC connection pipe with brass ions :. 45 cm length. 15 mm nominal bore. 9.00 0.00 9.00 each 102.60 923 1 0 923.4 0 0 0 0 0 0 0 0 0 0 0 0

85 18.31.1.1 Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter. Class-1 2.00 0.00 2.00 Each 3886.60 7773 1 0 0 0 0 0 0 0 7773 0 0 0 0 0 0

86 18.32.1 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S(non modular) bricks of class designation 100 A 2.00 2.00 2.00 Each 1177.90 2356 1 0 0 0 0 0 0 0 0 2356 0 0 0 0 0

87 18.33.1 Constructing masonry Chamber 60 x 60 x 75 cm inside, in brick work in cement mortar 1:4(1 cement: 4 coarse sand) for sluice valve, with C.I surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necesary excavation, foundation concrete 1:5:10( 1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3( 1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:nt complete as per standard design. With common burnt clay F.P.S (non modular) bricks of class designation 100 A 5.00 1.00 1.00 6.00 Each 7210.60 43264 1 0 36053 0 0 0 0 0 0 7211 0 0 0 0 0

88 18.4 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 0 0 0 0 0 0 0 0 0 0 0 0 0

89 18.41 Providing & filling sand of grading zone V or coarser grade all-around G.I. pipes in external work. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

90 18.46 Providing and fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screws etc. complete (New work) 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

91 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 18.00 0.00 18.00 each 434.20 7816 1 0 7815.6 0 0 0 0 0 0 0 0 0 0 0 0

92 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm niminal bore. 9.00 0.00 9.00 each 715.10 6436 1 0 6435.9 0 0 0 0 0 0 0 0 0 0 0 0

93 18.51.1 PProviding and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm Nominal bore. 9.00 0.00 9.00 each 708.40 6376 1 0 6375.6 0 0 0 0 0 0 0 0 0 0 0 0

94 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore 27.00 0.00 27.00 each 594.80 16060 1 0 16059.6 0 0 0 0 0 0 0 0 0 0 0 0

95 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore 18.00 0.00 18.00 each 500.40 9007 1 0 9007.2 0 0 0 0 0 0 0 0 0 0 0 0

96 18.58.1.2 1Providing and fixing PTMT grating of approved quality and colour 25 mm nominal dia with 25 mm waste hole 30.00 0.00 30.00 each 45.20 1356 1 0 1356 0 0 0 0 0 0 0 0 0 0 0 0

97 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms. 9.00 0.00 9.00 each 96.80 871 1 0 871.2 0 0 0 0 0 0 0 0 0 0 0 0

98 19.18.3 Supplying and fixing C.I. cover without frame for manholes : 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg 2.00 0.00 2.00 Each 6918.30 13837 1 0 0 0 0 0 0 0 13837 0 0 0 0 0 0

SEWARAGE AND DRAINAGE 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

99 19.1.2 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete 150 mm diameter 20.00 20.00 20.00 Metre 464.30 9286 1 0 0 0 0 0 0 0 0 9286 0 0 0 0 0

100 19.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design 150 mm diameter S.W. pipe 20.00 20.00 20.00 Metre 494.40 9888 1 0 0 0 0 0 0 0 0 9888 0 0 0 0 0

101 19.4 Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I grating brick masonry chamber with water tight C.I cover with frame of 300 x 300 mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

19.4.2.1 150 x 100 mm size P type. With common burnt clay F.P.S (non modular) bricks of class designation 7.5 5.00 5.00 5.00 Each 1908.90 9545 1 0 0 0 0 0 0 0 0 9545 0 0 0 0 0

102 19.6 Providing and laying non-pressure NP2 class (light duty) R.CC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement: 2 fine sand) including testing of joints etc. complete. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

103 2.10 Excavating trenches of required width for pipes cables, etc, including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

2.10.1.2 Pipes, cables etc. ecceeding 80 mm dia . But not exceeding 300mm dia. 35.00 35.00 35.00 Per M 391.70 13710 1 0 0 0 0 0 0 0 0 13710 0 0 0 0 0

104 19.7 Constructing brick masonry manhole in cement mortar 1:4(1 cement: 4 coarse sand) with R.C.C top slab with 1:2:4 mix (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand:8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design: 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

19.7.1 Inside size 90 x 80 cm and 45 cm deep including C.I cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

(i) 19.7.1.1 With common burnt clay F.P.S (non modular) bricks with class designation 7.5 5.00 5.00 5.00 Each 7914.70 39574 1 0 0 0 0 0 0 0 0 39574 0 0 0 0 0

(ii) 19.8.1.1 Extra for depth for manholes Size 90 x 80 cm with common burnt clay F.P.S (non modular) bricks of class designation 7.5 2.00 2.00 2.00 metre 5660.00 11320 1 0 0 0 0 0 0 0 0 11320 0 0 0 0 0

105 19.30 Constructing brick masonry chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4( 1 cement: 4 coarse sand) C.I cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) R.C.C top slab ith 1:2:4 mix ( 1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) foundtion concrete 1:5:10( 1 cement: 5 fine sand:10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

19.30.1.1 Inside dimensions 455 x 610 mm and 45 cm deep for single pipe line: With common burnt clay F.P.S (non modular) bricks of class designation 7.5 2.00 2.00 2.00 Each 4266.80 8534 1 0 0 0 0 0 0 0 0 8534 0 0 0 0 0

106 19.31.1.1 Extra for depth beyond 45 cm of brick masonry chambar For 455x610 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1.00 1.00 1.00 metre 3946.20 3946 1 0 0 0 0 0 0 0 0 3946 0 0 0 0 0

107 6.48A Providing 150mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron concrete (1: 4:8), over one brick designation 100-A flat soling in proper grade and slope at the base, the drain duly plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, 80.00 80.00 80.00 Meter 582.50 46600 1 0 0 0 0 0 0 0 0 46600 0 0 0 0 0

108 24.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All Type of Soil. 300 mm dia 90.00 0.00 90.00 mtr. 486.80 43812 1 0 0 0 0 43812 0 0 0 0 0 0 0 0 0

109 24.2 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

110 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

111 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia 20.00 0.00 20.00 mtr. 673.50 13470 1 0 0 0 0 13470 0 0 0 0 0 0 0 0 0

112 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 20.00 0.00 20.00 cum 1188.90 23778 1 0 0 0 23778 0 0 0 0 0 0 0 0 0 0

113 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 12.00 0.00 12.00 cum 1195.60 14347 2 0 0 0 14347.2 0 0 0 0 0 0 0 0 0 0

114 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 8.00 0.00 8.00 cum 1195.60 9565 1 0 0 0 9564.8 0 0 0 0 0 0 0 0 0 0

115 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-incharge. 8.00 11.30 0.00 19.30 cum 1343.20 25924 1 0 0 0 10745.6 15178.16 0 0 0 0 0 0 0 0 0

116 24.9 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. 4.00 0.00 4.00 each 1213.20 4853 1 0 0 0 4852.8 0 0 0 0 0 0 0 0 0 0

117 24.11.2 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture,including hire & labour charges, fittings & accessories, all complete,for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia. 5.00 0.00 5.00 mtr. 1727.20 8636 1 0 0 0 0 8636 0 0 0 0 0 0 0 0 0

118 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 16.00 0.00 16.00 hors 916.80 14669 1 0 0 0 0 14668.8 0 0 0 0 0 0 0 0 0

119 24.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

120 24.14 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

121 24.15 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

122 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

123 12.79 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

124 12.80 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

125 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 16.00 0.00 16.00 cum 47.90 766 1 0 0 0 766.4 0 0 0 0 0 0 0 0 0 0

126 18.37 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside)with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

18.37.1 With common burnt clay F.P.S.(non modular) bricks of class designation 100A 4.00 0.00 4.00 each 6849.90 27400 1 0 0 0 27399.6 0 0 0 0 0 0 0 0 0 0

LANDSCAPE & HORTICULTURE WORKS 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

127 2.32 Clearing jungle including uprooting or rank vegetation, grass, brush wood, trees and scaplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 0.00 335.00 335.00 100 sqm 697.40 2336.29 1 0 0 0 0 0 0 0 0 0 0 0 0 0 2336

128 23.1 Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge of / and manure before and after flooring trench with water (excluding cost of imported earth, sludge or manure) 0.00 201.00 201.00 cum 44.70 8985 1 0 0 0 0 0 0 0 0 0 0 0 0 0 8985

129 23.2 Supplying and stacking of good earth at site including royalty but excluding carriage (earth measured in stacks will be reduced by 20 % for payment) 0.00 77.67 77.67 cum 143.50 11145 1 0 0 0 0 0 0 0 0 0 0 0 0 0 11145

130 23.4 Supplying and stacking at site dump manure from approved source, excluding carriage (manure measured in stacks will be reduced by 8% for payment) 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

131 23.4.3 Screened through sieve of I.S. designation 4.75 mm 0.00 16.78 16.78 cum 315.80 5298 1 0 0 0 0 0 0 0 0 0 0 0 0 0 5298

132 23.9 Mixing earth and sludge or manure in proportion specified or directed. 0.00 94.45 94.45 cum 20.90 1974 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1974

133 23.8 Spreading of sludge, dump manutre or/and good earth in required thickness (Cost of sludge, dump manure or/and good earth to be paid separately) 0.00 94.45 94.45 cum 30.10 2843 1 0 0 0 0 0 0 0 0 0 0 0 0 0 2843

134 23.12 Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rought dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. 0.00 335.00 335.00 100 sqm 3418.20 11450.97 1 0 0 0 0 0 0 0 0 0 0 0 0 0 11451

135 23.10 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free form weeds and fit for moving including supplying good earth if needed. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

137 23.14 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20 % 1 part of stacked volume of manure after reduction by 8 % ) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure sludge or extra good earth if needed to be paid for separately) 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

138 23.13 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8 :1 (8 parts of stacked volume of earth after reduction by 8% ) flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m lift upto 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) 0.00 45.00 45.00 cum 126.90 5711 1 0 0 0 0 0 0 0 0 0 0 0 0 0 5711

Plantation of trees & Shrubs/ creeps. 0 0 0 0 0 0 0 0 0 0 0 0 0 0

139 7.7 DSR-20 (Horticulture & Landscape) Providing and stacking of Bauhinia blakeana (Kachnar) of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 0.00 20.00 20.00 each 80.00 1600 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1600

140 7.24 DSR-20 (Horticulture & Landscape) Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.v 0.00 20.00 20.00 each 60.00 1200 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1200

141 7.16 DSR-20 (Horticulture & Landscape) Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 0.00 10.00 10.00 each 65.00 650 1 0 0 0 0 0 0 0 0 0 0 0 0 0 650

142 8.10 DSR-20 (Horticulture & Landscape) Providing and stacking of Cassia biflora of height 90-105 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge. 0.00 20.00 20.00 each 100.00 2000 2 0 0 0 0 0 0 0 0 0 0 0 0 0 2000

143 8.33 DSR-20 (Horticulture & Landscape) Providing and stacking of Hamelia patens of height 90-105 cm. bushy in big size HDPE bags as per direction of the officer-in-charge. 0.00 20.00 20.00 each 100.00 2000 1 0 0 0 0 0 0 0 0 0 0 0 0 0 2000

144 8.48 DSR-20 (Horticulture & Landscape) Providing and stacking of Mussaenda erythrophylla (Rosea) of height 60- 75 cm. multi branched in earthen pots of size 25 cm as per direction of the officer-in-charge. 0.00 10.00 10.00 each 110.00 1100 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1100

145 NS Providing and fixing of vineered wood plastic compositepanelling upto required height with vineer og greenply/marino/ century over 12 mm thick W/T board of alstone/ equivalent make filled and fixed over hollock wood frame of 25x25mm post s at 60 cms centre including cost of anchoring the panelling to walls proper including T/W lipping on the top surface termie treatment as per drawing & specification and direction of E/I. 317.35 0.00 317.35 m2 9133.00 2898358 1 2898358 0 0 0 0 0 0 0 0 0 0 0 0 0

146 N.S S/F/F 1 H.P Crompton Submersible Pump of ISI marka electric wire switch, starter etc. 1.00 0.00 1.00 each 30090.00 30090 1 0 0 0 0 30090 0 0 0 0 0 0 0 0 0

147 N.S S/F/F 1 H.P Crompton Submersible Pump of ISI marka electric wire switch, starter etc. 2.00 0.00 2.00 each 6000.00 12000 1 0 0 0 0 12000 0 0 0 0 0 0 0 0 0

148 A/R Carriage of Materials 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

149 A/R Extra cost of Materials 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

AMOUNT OF CIVIL WORK Rs= 30,577,208.00

150 3 a) Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

d) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

e) Suitable cement concrete foundation duly plastered and with anti vibration pads. 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

151 7 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 0.00 0 0 0 0 0 0 0 0 0

152 9 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/ Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank unmetal/Stainless Steel cap and chain as required : 0.00 0 0 0 0 0 0 0 0 0

153 10 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/ Stainless Steel cap and chain as required : 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

10.2 Single headed Stainless steel 0.00 1.00 Set 5722.00 5722 0 0 0 0 0 0 0 0 0 0 0 0 0 0

154 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

155 12 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

156 13 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 0.00 3.00 Nos 1236.00 3708 0 0 0 0 0 0 0 0 0 0 0 0 0 0

157 14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

158 15 Providing, installation, testing and ommissioning of stainless steel Ystrainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

159 16.1 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required . Gunmetal. 0.00 3.00 Set 5206.00 15618 0 0 0 0 0 0 0 0 0 0 0 0 0 0

160 17.1 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. "Connections from riser with 25 mm dia stop gun metalvalve & M.S. Pipe and socket.". 30 mtr. 0.00 3.00 Set 7920.00 23760 0 0 0 0 0 0 0 0 0 0 0 0 0 0

161 18.1 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. Gunmetal 0.00 4.00 Nos 2393.00 9572 0 0 0 0 0 0 0 0 0 0 0 0 0 0

162 19.3 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :. 3 way - 150 mm dia M.S. Pipe 0.00 1.00 Set 9071.00 9071 0 0 0 0 0 0 0 0 0 0 0 0 0 0

163 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. 0.00 1.00 Set 17707.00 17707 0 0 0 0 0 0 0 0 0 0 0 0 0 0

164 24.2 Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases,strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves,MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required. 100mm dia 0.00 1.00 Set 44496.00 44496 0 0 0 0 0 0 0 0 0 0 0 0 0 0

165 A/R Providing and fixing CO24.5 kg extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve. Internal discharge tube 30 cms long high pressure discharge hose discharge tube 30 cms long high pressure discharge hose nozzle ISI marked as per IS13869 including fixing with dash fastners etc complete, make newtech,kalpex 0.00 15.00 Nos 7800.00 117000 0 0 0 0 0 0 0 0 0 0 0 0 0 0

166 A/R Providing and fixing ABC 6 kg extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve. Internal discharge tube 30 cms long high pressure discharge hose discharge tube 30 cms long high pressure discharge hose nozzle ISI marked as per IS13869 including fixing with dash fastners etc complete, make newtech,kalpex 0.00 15.00 Nos 5600.00 84000 0 0 0 0 0 0 0 0 0 0 0 0 0 0

FIRE ALARM SYSTEM 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0

167 NSR Supply installtion testing and commissionning of 2 Loop addressable fire alarm control panel with LCD display having inbuilt battery charger & batteries 0.00 1.00 Nos 415000.00 415000 0 0 0 0 0 0 0 0 0 0 0 0 0 0

168 NSR SITC of Addressable manual call point complete with mounting base in ABS body 0.00 4.00 Nos 6890.00 27560 0 0 0 0 0 0 0 0 0 0 0 0 0 0

169 NSR Supply and installation of wall mounted horn /Hooter in ABS body 0.00 4.00 Nos 7280.00 29120 0 0 0 0 0 0 0 0 0 0 0 0 0 0

170 NSR Supply and installation of Addressable Smoke Detector in ABS body 0.00 50.00 Nos 6480.00 324000 0 0 0 0 0 0 0 0 0 0 0 0 0 0

171 NSR Supply and laying of 1.5 sqmm dual core copper wire with 19 mm dia pvc conduit 0.00 600.00 Nos 120.00 72000 0 0 0 0 0 0 0 0 0 0 0 0 0 0

FIRE FIGHTING TOTAL AMOUNR Rs.= 1,550,310.00

(FOR GROUND FLOOR & MEETING HALL)

172 DWS/34762 Conference Table - Conference Table overall Size (6000x2850x750)mm. The extendable meeting adds a sense of character to conference rooms.The SP1 TABLE - 9 NOS Size (1350 L X 600 D X 750 HT) & SP2 TABLE - 2 NOS Size (750 L X 600 D X 750 HT) The innovation modular design enables varius configration. An all wood conference table with minimalist look and basic functionality, ideal for meeting room & top comes with 40mm thik pre lam particle board & side panel 25mm thick prelam particle board & 2mm pvc edge banding with modesty given much needed ptimary and close interaction. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. Color-Wenge. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC, Indian Design Mark, ISO14001, 18001 & PEFC. 1 1 EACH 314000.00 314000

173 RICH/37815/HB High Back Chair with revolving Size(W)590mm X (D)505mm X (H)1280mm. Chrome plated base with gas height adjustment and central tilting with single locking machenaism. Armrest with padding. Leatherette uphlostery has the look and feel of top grain leather. Cushion wtih lumber support for all day comfort. Chrome plated loop armrest with padded upholstery for extra comfort. chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Look out tilt function when chair is in upright position. 5% post consumed recycled content & 30% total recycled content. Color-Black.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, SEDEX, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. 1 1 EACH 33580.00 33580

174 MMPL/70008/MB Medium Back Chair - Chair Size (W)580mm X (D)670mm X (H)1110mm. Its Classic All-Black Look With Soft Black Fabric Upholstery Makes It An Irresistible Chair. The Deep-Cushioned Back And Seat Conform To The Natural Curvature Of The Spine For Optimum Ergonomics And Lumbar Support. The Synchro-Single Locking Mechanism Along With The Tilt Tension Control, Lets You Find Your Ergonomic Position With Ease. The Pneumatic Height Adjustment Along With The Sturdy Armrest Provide Further Comfort. A Strong Nylon Base Supports The Structure, While The 55Mm Castor Wheels And A 360-Degree Swivel Provide Swift Yet Stable Movement. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. 8 8 EACH 22000.00 176000

FOR CHAMBER 01 & 02 , OFFICER CHAMBER & WORKSTATION AREA EACH 0

175 DWS/1500 Table with side unit return- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. 3 3 EACH 75000.00 225000

176 MMPL/70001/HB High Back Fabric Chair in Black Colour with Matte Finish; Durian Office Seating – Oxford Chair (Medium Back 360° Revolving, SKU: 70001/MB/FL); Size: 600mm(L) x 660mm(D) x 1050mm(H); Full Black Upholstery in Contemporary Style; Armrest with 2-Step Height Adjustment; 12mm BWR Plywood (IS 303) for Seat & Back; Seat & Back Foam: 40±2mm PU Foam, Density 32(±3) kg/m³; Symmetrical Lumbar Support with Self-Weighted Multi-Locking Mechanism; Seat Size: 480mm x 500mm; Back Size: 460mm x 510mm; Seat Height: 450–550mm; Back Height From Floor: 950–1050mm; 100mm Hydraulic Gas Lift; 650mm Chrome Base with Smooth Castors; Seller/Company NABCB Certified (ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007). 3 3 EACH 16250.00 48750

177 MMPL/70011/CN Visitor Chair - Chair Size (W)590mm X (D)490mm X (H)980mm. Its moulded seat and indented back provide exceptional all-day support. Premium virgin foam sits atop a 14mm thick boiling waterproof plywood forming the moulded seat. This is then encased in deep black fabric upholstery with defined line seams that provide comfortable seating while adding depth to the high backrest. The powder-coated metal cantilever base provides extraordinary support for easy seating. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. 3 3 EACH 14000.00 42000

178 CLINT/2200 Director Table Structure of L-Shaped Desk with Primary Work Surface; Overall Size 2200mm(L) x 2000mm(D) x 740mm(H); 45mm Thick Tabletop in Prelaminated Particle Board with Warm Walnut Finish and 2mm PVC Edge Banding in Matte Finish; Side Panel 45mm Thick; Side Runner “A” Size 2000mm(L) x 500mm(D) x 700mm(H); Combination Construction with SS Stud Grade 304; Left Side Below Tabletop: Side Runner “A” with 2-Door Storage + 3 Drawers with Central Lock + Handles + 1 Open Shelf; Right Side Below: SS Stud with 1 Fixed Pedestal, Top 18mm Thick; Fixed Pedestal Size 464mm(L) x 500mm(D) x 646mm(H) with 2 Drawers + 1 Filing Drawer on Castors, Central Lock, and Handles; Made Using Three-Layer Prelaminated Particle Board (Grade II, Type III, IS 12823 Latest); Seller/Company Must Be NABCB Certified: ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, ISO-37001:2016, ISO-13485. 1 1 EACH 133850.00 133850

179 CLINT/BU Back Unit Storage Material: Prelaminated Particle Board; Size: 1600mm(L) x 450mm(D) x 800mm(H); Colour: Brown–W Classic Walnut Brown–Smoke Oak; Finish: Laminate Finish; Back Unit Top Made from 18mm Thick Prelaminated Particle Board (Grade II Type III, IS 12823 Latest); All Sides, Shelves & Shutters Made from 18mm Prelaminated Particle Board; Exposed Edges Finished with 2mm Edge Banding Tape Applied via Edge Banding Machine at 200°C; Storage Unit with 4 Shutters: 1 Openable Door with 1 Fixed Shelf + 2 Openable Doors with 1 Fixed Shelf + 1 Openable Door with 1 Fixed Shelf; Provided with 3 Universal Cam Locks and Handles for Easy Opening; Overall Height 800mm; Each Shutter Fitted with Required Hinges, 100x10 SS Tower Bolt, Double Strip Magnetic Catcher, and Drawers with 100mm SS Fancy Handles (Make: Ebco) with All Necessary Hardware; Installation Uses Wooden Dowels and Minifix for Support; Made Using Three-Layer Prelaminated Particle Board (Grade II Type III, IS 12823 Latest); Seller/Company Must Be NABCB Certified: ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, ISO-37001:2016, ISO-13485. 1 1 EACH 55950.00 55950

180 RICH/37820/HB High Back Revolving Chair- Chair Size (W)660mm X (D)500mm X (H)1265mm. Made From High-Density Foam, The Sink-In Cushions And The Cradling Backrest Provides Contouring Comfort For All-Day Seating. The Soft To Touch Premium Leatherette Upholstery Add Elegance To Its Look While Also Making It Stain & Fade Resistant. Features Such As Synchro Multi-Locking Mechanism, Pneumatic Height Adjustment, Tilt Tension Control, Etc, Let You Find Your Ergonomic Position With Ease. The Pneumatic Height Adjustment Along With The Thick Padded Headrest And Armrest Further Let You Sit In Absolute Comfort. A Strong Chrome Base Supports The Structure While The 360 Swivel And 55Mm Castors.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, SEDEX, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. 1 1 EACH 31800.00 31800

181 ANJIS/32002 Fix Multi-Purpose Leatherette Chair in Black Colour with Matte Finish; Durian Office Seating – Anjis/32002 Chair; Type: Fixed Cantilever; Overall Size: 595mm(L) x 510mm(D) x 875mm(H); Full Black Leatherette Upholstery in Contemporary Matte Finish; Arms: Padded Armrest; Ply: 12mm Hot-Pressed BWR Plywood (IS 303) for Seat & Back; Seat Foam: 40±2mm Polyurethane Foam, Density 32(±3) kg/m³; Back Foam: 40±2mm Polyurethane Foam, Density 32(±3) kg/m³; Backrest Support with Symmetrical Lumbar Design; Seat Size: 500mm(L) x 510mm(D) x 455mm(H); Back Size: 440mm(L) x 595mm(H); Back Height: 440mm; Base: 4-Leg Metal Powder-Coated Frame; Seller/Company Must Be Certified: ISO-9001:2008, ISO-9001:2015, ISO-50001:2018, ISO-14001:2015, OHSAS-18001:2007, GREENGUARD, GreenPro, AIOTA, Indian Design Mark. 6 6 EACH 12500.00 75000

182 JEESE/3 3 Seater Sofa - 3 Seater Sofa Size - (L)1760mm X (D)720mm X (H)845mm. Fine Finesse. The Jesse sofa is what contemporary style looks like. This sofa is sleek and comfortable. The sleek frame is finished in a rich polish with split panel seating. The back and seat have medium to firm cushioning for better posture. The Leg of Solid wood in glossy finished. Frame used is treated American pine wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated american pine wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed.Color-Camel/Green. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. 2 2 EACH 43680.00 87360

183 HOPPER/CT Wooden Center Table - Durian Center Table Size (L)1130mm X (W)630mm X (H)410mm. The centre table is made keeping your comfort in mind. The sheen on the glass table top will ensure you are the envy of many a neighbour. Inlaid onto a solid wood frame that slopes inward, the table is a gorgeous piece of furniture to highlight your living room. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass provides the glass with a focal point and some support. Add volumes of style to your living room with the Hopper centre table. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. 1 1 EACH 32800.00 32800

184 POLKA/ST Corner Table- Corner Table (Dia) 390mm X(H)460mm The sleek compact table made of solid wood has a touch of style. Perfectly crafted slim tabletop & miniature design.Base is made of exquisitely crafted three curved leg base. Stylish base of the table brings an lavish look to the table.The rich finish of table enhances the table. The Manufacturer OEM must have ISO-9001-2015, ISO-14001-2015, ISO-45001-2015, ISO-5001-2018 certificates & ISO-13485:2016 issued by NABCB Accelerated Agency, BIFMA Membership Certificate, SEFA, BIFMALevel1/Level 2 Certificate with Screen Shot from BIFMA Website. The Manufacturer/OEM must have indoor Advantage Gold issued by SCS Global Service USA Green Co Certiificate issued by CII. 2 2 EACH 10000.00 20000

185 LEEDS/SINGLE BED Wooden Single Bed - Bed Size(W)1070mm X (D)2080mm X (H)950mm. Headboard Material Solid Wood, Frame Material Solid Wood, Leg Material Solid Wood, Finish Matte, Colour & Colour Family White, Brown - Dark Oak, Headboard Height 950mm. The Manufacturer OEM must have ISO-9001-2015, ISO-14001-2015, ISO-45001-2015, ISO-5001-2018 certificates & ISO-13485:2016 issued by NABCB Accelerated Agency, BIFMA Membership Certificate, SEFA, BIFMALevel1/Level 2 Certificate with Screen Shot from BIFMA Website. The Manufacturer/OEM must have indoor Advantage Gold issued by SCS Global Service USA Green Co Certiificate issued by CII. 1 1 EACH 33000.00 33000

186 SINGLE BED MATTRESS Single Bed Mattress - Mattress Size (W) 915mm X (D) 1980mm X (H) 150mm. Designed for all generations, our mattress is ideal for sleepers who prefer complete orthopedic support with a firm yet gentle feel. This single bed mattress feature 5-layer construction that offers targeted comfort and support, all you need for a restful night's sleep. The Manufacturer OEM must have ISO-9001-2015, ISO-14001-2015, ISO-45001-2015, ISO-5001-2018 certificates & ISO-13485:2016 issued by NABCB Accelerated Agency, BIFMA Membership Certificate, SEFA, BIFMALevel1/Level 2 Certificate with Screen Shot from BIFMA Website. The Manufacturer/OEM must have indoor Advantage Gold issued by SCS Global Service USA Green Co Certiificate issued by CII. 1 1 EACH 19490.00 19490

187 PILLOW Pillow Size 330mm (D) X 560mm(L) Made With The Cotton. Inner Cushioning Material ( Filling ) - New White 100 % Cotton Fibre Free From Dust And Other Foreign Matter. Body Cover ( Casing ) - Cloth Cotton Drill As Per Bis Specification No. Is :177 - 1989, Varity No. 3 ( Mercerized And Preshrunk ). Mass Of Pillow ( Min ) - 1.5 Kilogram.The Manufacturer OEM must have ISO-9001-2015, ISO-14001-2015, ISO-45001-2015, ISO-5001-2018 certificates & ISO-13485:2016 issued by NABCB Accelerated Agency, BIFMA Membership Certificate, SEFA, BIFMALevel1/Level 2 Certificate with Screen Shot from BIFMA Website. The Manufacturer/OEM must have indoor Advantage Gold issued by SCS Global Service USA Green Co Certiificate issued by CII. 1 1 EACH 1200.00 1200

188 LINEAR WS/1200 LINEAR WORKSTATION -Linear Workstation SIZE: 1200 L + 600 D X 1200HT. ·67mm thk Sliding Tile Based Partition. · Single Metal raceway cover at skirting level in Partition.· Pin up & white board in partition above the tabletop. · Table top made of 25mm thk Prelamin particle board with pvc edges. · Tabletop supported with 18mm thk side panel Prelaminated Particle Board with Pvc edge banding side.·Pedestal of 400Lx 450Dx725 HT (2 drawer + 1filling). .PVC Keyboard Tray ..Metal CPU Trolley. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard, Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 6 6 EACH 58800.00 352800

189 MMPL/70001/MB Medium Back Fabric Chair in Black Colour with Matte Finish; Durian Office Seating – Oxford Chair; Type: Medium Back 360° Revolving Chair; Overall Size: 590mm(L) x 660mm(D) x 1080mm(H); Full Black Upholstery in Modern Matte Finish; Arms: Fixed PP Arms Connected to Seat & Back; Ply: 12mm Hot-Pressed BWR Plywood (IS 303) for Seat & Back; Seat Foam: 40±2mm Polyurethane Foam, Density 32(±3) kg/m³; Back Foam: 40±2mm Polyurethane Foam, Density 32(±3) kg/m³; Backrest Support with Symmetrical Lumbar Design; Mechanism: Synchro Single Locking; Seat Size: 595mm(L) x 660mm(D); Seat Height: 480–580mm; Back Max Height: 1080mm; Gas Lift: 100mm Telescopic Hydraulic; Base: 650mm Nylon Base with Smooth Castors; Seller/Company Must Be NABCB Certified: ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, ISO-37001:2016, ISO-13485. 6 6 EACH 15000.00 90000

190 DWS/900/STORAGE 2 Door Storage- Storage Size (900x450x750)mm.Openable shutter & shelf. Top made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. 3 3 EACH 28900.00 86700

FOR WAITING AREA

191 NIXON/3 Three Seater Waiting Area Chair in Mild Steel; Size: 1820mm(L) x 690mm(D) x 790mm(H); Colour: Silver; Product Weight: Approx. 31kg; Mild Steel Visitor Bench with Single-Section Seat & Back; Per Seat Length: 520mm; Seating Height: 430mm; Beam Made of 1.6mm Thick Mild Steel for Durability & Strength; Seat Made with 1.2mm Thick Mild Steel Border with Chrome Plating for Each Seat & Back; Mild Steel Chrome-Plated Handles and Die-Pressed Legs; Gross Weight ~31kg; Steel Grade: 202 High Yield Strength (As per IS:513 & IS:304 Grade); Seller/Company Must Be Certified: ISO-9001:2008, ISO-9001:2015, ISO-50001:2018, ISO-14001:2015, OHSAS-18001:2007, GREENGUARD, GreenPro, AIOTA, Indian Design Mark. 2 2 EACH 25580.00 51160

192 DIA'S TABLE Dia's Table- Table Size(6750 L X 750 D X 750 HT)mm.Table made of 25mm thk pre lam particle board with edge banding. Table top supported with 25 mm Thk side panel & front Modesty panel.Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Company shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA, Indian Design Mark certified, Trade Mark Certified, GREEN GUARD COMPLIANCE,GREEN PRO, SEFA, SEDEX, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. 1 1 EACH 128000.00 128000

193 RICH/37815/HB High Back Chair with revolving Size(W)590mm X (D)505mm X (H)1280mm. Chrome plated base with gas height adjustment and central tilting with single locking machenaism. Armrest with padding. Leatherette uphlostery has the look and feel of top grain leather. Cushion wtih lumber support for all day comfort. Chrome plated loop armrest with padded upholstery for extra comfort. chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Look out tilt function when chair is in upright position. 5% post consumed recycled content & 30% total recycled content. Color-Black.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, SEDEX, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. 5 5 EACH 33580.00 167900

194 RICH/37816/CN Visitor Chair - Chair of Size :- (W)610mm X (D)505mm X (H)990mm. The chair shall be ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The leatherette upholstery in the chair has the look and feel of top grain leather. The chrome plated loop armrest with padded upholstery is provided for extra comfort. The tubular visitor frame shall be powder coated (DFT 40-60 microns) cantilever structure and made of dia 2.54+/-0.03cm x 0.2+/-0.016cm thick MSERW tube with a connecting M.S spine welded to it. The Chair seat has foam of density 30-35 (+/-2kg /m3). Dimensions tolerance / variations shall be within +/- 1 cm. The product shall be from ISO 9001:2015,ISO 50001:2011, ISO 14001, OHSAS 18000 , BIFMA, FSC, AIOTA, SEDEX & Greenguard Certified company 6 6 EACH 23800.00 142800

195 AUDITORIUM CHAIR Auditorium Chair in Modern Style, Size 650mm(L) x 460mm(D) x 960mm(H), Material: Fabric with Metal Structure, Colour: Red, Finish: Matte; Polished Solid Wood Handle & Cup Holder; Premium Fabric Auditorium Chair with Metal Framing for Warp & Scratch Resistance; Comfortable Seat Depth & Height for Modern Indian Lifestyle, Wrapped in Soft Fabric, Panelled Back & PP Injection-Molded Armrest; Seat & Back Understructure Made with 12mm Plywood (IS 303, Moisture Content 10–12%); Metal Frame Finished with Epoxy Polyester Black Powder Coating (50–60 Microns ±5); Upholstery with High-Resilience Molded PU Foam Density 40 ±5 Laminated with Polyester Fabric; Common Sharing Arms in Injection-Molded Polypropylene; Full Plastic Seat Shell Contoured for Body Support with Waterfall Edge for Pressure Relief; Seat Bottom & Lift Mechanism Enclosed in Injection-Molded PPCP Shell with Unique Texture; Self Tip-Up Seat with Roller/Ball Bearing Type Cushion; ERW Tube/IS:3074-1976 Grade-1 Structure with Noise-Free Zigzag Spring & High-Tensile Bolts; Centre Distance 21"/22" (Armrest to Armrest); Back Housing in One-Piece Injection-Molded PPCP Shell with Acoustical Perforation; Seat & Back Frames Made from ERW Tube with High-Tensile Hardware; Seller/Company Certified: ISO-9001:2008, ISO-9001:2015, ISO-50001:2018, ISO-14001:2015, OHSAS-18001:2007, GREENGUARD, GreenPro, AIOTA, Indian Design Mark; Bidder Must Offer GRIHA-Compliant Products or OEM Must Have FSC Certificate. 50 50 EACH 29800.00 1490000

FURNITURE WORK TOTAL AMOUNT Rs.= 3,839,140.00

(A) Amount Of SOR & DSR Items Rs= 28,118,390.00

(B) Amount Of Non Schedule Items Rs= 7,836,258.00

(C) Apply Correction Fector @ 0.982 on Schedule Items Rs- 27,842,267.00

TOTAL AMOUNT OF BOQ Rs- (B + C + D ) Rs= 37,170,871.00

ELECTRIFICATION WORK

1 1.3.3 Wiring for light point/ fan point/ exhaust fan point/ Call bell Point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable size G.I box etc. as required. Group - 'C'

Light Point -149 230 1146.00 Point 263,580.00

Fan/Wall Fan Point/Exhaust Fan - 78

Call Bell Point - 03

2 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 700 309.00 Metre 216,300.00

3 1.7 Wiring for circuit/ submain wiring along with earth wire with the following sizes FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (For circuit & street light) 575 201.00 Metre 115,575.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (For Computer Terminal) 350 246.00 Metre 86,100.00

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire(For AC) 400 309.00 Metre 123,600.00

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire 200 925.00 Metre 185,000.00

4 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular switch box including connection but excluding modular plate etc. as required. 61 358.00 Each 21,838.00

5 1.31 Supplying and fixing suitable size G.I box with modular plate and cover in front on surface or in recess including providing and fixing 5 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc, as required. 30 414.00 Each 12,420.00

6 1.32 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc, as required. 46 531.00 Each 24,426.00

7 1.33 Supplying and fixing 2 pin, 5 amp. ceiling rose on the existing junction box/PVC box including connection etc as required. 111 64.00 Each 7,104.00

8 1.34 Supplying and fixing batten/angle holder including connection etc. as required. 72 80.00 Each 5,760.00

9 1.37 Supplying and fixing Ding-Dong call bell suitable for single phase, 230 volts complete as required. 3 240.00 Each 720.00

10 1.27 Supplying and fixing following modules G.I. box along with modular base and cover plate for modular switches in recess etc as required.

11 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. 26 683.00 Each 17,758.00

12 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 nos. 5 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 22 778.00 Each 17,116.00

13 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.8.6 8 way, Double door (for Building street light) 1 2591.00 Each 2,591.00

14 2.9 Supplying and fixing following way three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator)

2.9.1 4 way ( 4 + 12 ), double door, horizontal type 7 4184.00 Each 29,288.00

2.9.2 6 way ( 4 + 18 ), double door, horizontal type 3 5132.00 Each 15,396.00

15 2.12 Supplying and fixing following rating, 240 volts, ‘C’ series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6A to 32A amps, single pole 144 237.00 Each 34,128.00

2.12.2 6A to 32A amps, SPN 3 606.00 Each 1,818.00

16 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.

17 2.34 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 250 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs),Legrand/Scneider.

2.33.1 4 way, Double door, I/C 160A, MCCB 1 12107.00 Each 12,107.00

18 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 47 521.00 Each 24,487.00

19 5.7 Supplying and fixing recess/surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

20 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

21 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

22 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

6.1.5 12 watt LED lamp 72 239.00 Each 17,208.00

23 5.6 Supplying and fixing following types aluminium extruded suspended type LED luminaire with minimum efficacy 100 lm/w ensuring uniform and continuous illumination including suspension system complete with electronic driver etc and connection with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

24 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 61 2482.00 Each 151,402.00

25 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

26 8.18 Supply and fixing of following sweep/ sizes PVC/ABS square body Exhaust Fan with automatic openable louvre shutter in existing opening including making connection, testing etc as required.

27 8.19 Supply and installation of 400 mm, 230 V A.C. wall/cabin fan including fixing the bracket, making connection, testing, commissioning etc as required. 8 3670.00 Each 29,360.00

28 8.5 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 12 1038.00 Each 12,456.00

29 7.7 Supply of following sizes and core XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor for working voltage upto 1.1 KV as required.

7.7.8 35 sq.mm, 3.5 core (for VTPN DB) 20 415.00 Metre 8,300.00

30 7.1 Laying of one number PVC insulated and PVC sheathed/ XLPE power cble of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

7.1.2 Above 35 sq. mm and upto 95 sq. mm 80 326.00 Metre 26,080.00

31 7.4 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

7.4.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25X3mm thick saddle) 20 109.00 Metre 2,180.00

32 3.15 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 2 13721.00 Set 27,442.00

33 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc as required. 30 144.00 Metre 4,320.00

34 8.11 Supplying and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley internal wiring, earth terminals, Bus bar Chamber, Insulator and complete in all respect etc and panel manufacturers must be approved by CPRI. (But without RYB inicator , ammeter, voltmeter, inter-connection copper conductor cable / solid copper strip, switchgears etc. 12 1809.00 Sft 21,708.00

35 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

36 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

37 AR Supply and fixing of copper strip for busbar etc as required. 6 871.00 Kg 5,226.00

38 8.13 Suppy and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc. as required. 1 6536.00 Each 6,536.00

39 2.2 Providing and fixing MV danger notice plate of 200mm x 150 mm made of mild steel at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side etc as required. 1 214.00 Each 214.00

FOR LIGHTNING ARRESTER

40 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 4 416.00 Each 1,664.00

41 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 20 81.00 Each 1,620.00

42 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 110 102.00 Metre 11,220.00

43 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 10 145.00 Metre 1,450.00

44 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 4 6323.00 Set 25,292.00

45 3.9 Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ termination with GI nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm) 40 133.00 Metre 5,320.00

46 DSR-40.3 Supplying Installation Testing and Commissioning of 4 MP IP IR Dome Camera having following specifications, type of lens and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: >50 dB, Camera should display Camera title, Date & Time in live & recorded video 2) Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

3. Compression (Minimum):-Video:- H.265 or better, H.264H, H.264, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723

4) Wide Dynamic Range:- WDR (120db or more)

5) Digital Noise Reduction:- DNR (3D) On/Off

6) Video Streaming & Frame Rates :- Triple streaming , configurable ×1080)@25/30 720P@25/30 fps).

7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection

8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, syslog, video encryption, IP/MAC filtering, HTTPS, trusted upgrade, trusted boot.

9) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card.

10) Recording Management: Format SD, overwrite, storage management, video to NAS device

11) Alarm Trigger : Motion/tampering detection; audio detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast 13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement.

16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VAC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body

19) Operating Condition:- Ambient Temperature:- ()05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

DSR-40.3.1 4MP (@ 25/30fps@1440P (256×1440)) IP IR Dome Camera with 2.8/ 3.6/6/8/12mm fixed lens (as per site requirement) 1 10365.00 Each 10,365.00

47 DSR-40.4 Supplying Installation Testing and Commissioning of 4MP Fixed Lens IP IR Outdoor Bullet Camera having following specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt Smart IR LED' swith effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

3) Compression (Minimum):-Video:- H.265 or better, H.264H, H.264, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120db or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable(Main 1080)@25/30 fps stream: Sub 2MP (1920 × streams minimum: 720P@25/30 fps). 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, syslog, video encryption, IP/MAC filtering, HTTPS, trusted upgrade, trusted boot. 9) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to NAS device,

11) Alarm Trigger : Motion/tampering detection; audio detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12) Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast, open source VMS 13) System Capability: ONVIF, Camera shall support open source VMS

14) Ethernet: 1 RJ 45 10/100 Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VAC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- ( )05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

DSR-40.4.1 4MP @ 25/30fps@1440P (2560 x 1440) Outdoor Bullet Camera with 2.8/ 3.6/6/8/12 mm fixed lens (as per site requirement) 1 10063.00 Each 10,063.00

48 DSR-40.9 Supplying Installation Testing and Commissioning of PTZ (Pan,Tilt and Zoom) IP IR Camera having following spcifications and features etc :- PTZ (Pan,Tilt and Zoom) IP IR Camera having following spcifications and features etc :- 1) IP IR PTZ Camera: Motorized PAN TILT ZOOM with IR . 2) Image Sensor: 1/2.8" or better progressive Scan CMOS 3)Signal System: PAL/NTSC 4) Minimum Illumination: 0.008 Lux@ F1.6, AGC ON,,0 lux with IR, or better 5) Imaging: 1/1s to 1/30000s, Auto Gain Control ,White Balance- Auto, Back Light Compensation, Image Rotation, Multi zone Privacy Masking (Upto 24 Area), HLC, Defog, Region Of Interest and EIS features. 6) On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both. 7) Signal to Noise Ratio: > 50 dB 8) Event Notification: Through Relays, E-Mails or FTP 9) Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR Source Inbuilt IR LED's with effective distance. The camera should have IR LED’s and cover distance up to 300 meter orabove

10) Auto Tracking: The camera should be equipped with Deep-learning-based auto tracking function using simultaneously all of the panning, tilting and zooming should be available. When a motion is detected in a registered monitoring area, the camera should track the motion (object) and capture it. 11) Pre/Post Event Buffering: The camera should support atleast of 5 seconds of pre & post event buffering. 12) Presets: 300 Presets 13) Video Compression (Minimum): H.265 or better, H.264, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 14) Wide Dynamic Range: WDR (120dB or more), HLC & BLC 15) Digital Noise Reduction: DNR (2D+3D) On/Off 16) Image Setting: Rotate Mode, ROI ,EIS, Defog, saturation, brightness, contrast, sharpness adjustable through client software or web browser 17) Profile Management: User configuration import, export

18) Cyber Security: Configuration encryption, AES 256-bit Encryption, Digest, account lockout, video encryption, IP/MAC filtering, trusted boot, trusted upgrade, trusted execution 19) Onboard Storage: Camera should support built in Micro SD/SDHC/SDXC Card slot upto 512 GB . It should be supplied with minimum 128GB Memory. 20) Recording Management: Format SD, overwrite, storage management, video to NAS device, remote archive access via FTP login 21) Edge based Video Analytics & Alarm Trigger: Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection, Tripwire, Intrusion,ObjectAbandon/ Missing, SMD, Face Detection 22) Network Protocol: SFTP, IPv6, IPv4, DNS,NTP, HTTP, HTTPS, SNMP, TCP/IP, PPPoE, NFS, ICMP, DHCP, SMTP, RTSPS. 23) System Capability: ONVIF Profile S, G & T. CCTV Camera OEM should be fulltime member of ONVIF and quoted models should be listed on ONVIF official website (All the certifications & Credentials should be valid on the date of technical evaluation).

49 DSR-40.11 Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) with camera licenses to record for all channels having specifications and features etc as mentioned below : 1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses for number of channels of NVR to record per NVR and to provide a live view, storage and simultaneously Multi-channel playback of all IP, IR camera or more and must be ONVIF with minimum support of 256Mbps incoming Bandwidth. 2) NVR should support H.265 or better, H.264, MJPEG, MPEG4 support 3) Must support 1 channel Input, 1 channel Output, RCA for Two-way Talk 4) Intelligent auto power on when power resumes after power outage. 5) Storage: It should support minimum 2 SATA Slots with 20TB capacity/ Slot. 6) Connectivity Interface : 1 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232 7) Backup Interface : Its should have 2 Nosx USB port (1x USB3.0, 1xUSB2.0) 8) Video Output Ports: 1x HDMI and 1 VGA 9) Alarm Ports: It should have 4/1 Ch In/ Out ports to connect various type of external sensors and output devices like hooter/ Siren etc. 10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated mobile number for power failure, HDD failure, vandalism, tempring, network disconnection and panic

11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for alerts and viewing. 12) Protocols: HTTP, HTTPS, TCP/IP, IPv4, UDP, NTP, DHCP, DNS, SMTP, UPnP, DDNS, Alarm Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for remote monitoring without any public IP need. 13) Standards: CE, FCC, RoHS and BIS Certified 14) Power Supply : Should support 12VDC, 4Amp or AC100-240V, 50/60Hz Power supply. 15) Operating Condition : Ambient Temperature (-5°C to 50°C), humidity 90% (max) (non-condensing) 16) The VMS, NVR application shall support all the features & functionalities of the offered cameras. 17) VMS should consist of Base license and Channel Licenses. VMS should be provided with camera Licenses , with no dependency of VMS licenses by binding with the MAC address of the cameras to achieve the functionality. 18) The NVR OEM shall be responsible for providing a mobile application compatible with both Android and iOS devices, enabling remote monitoring and playback of cameras/NVR footage.

19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public IP address for remote monitoring over the Internet. 20) Must support Resolution: 7680x4320 (8K), 3840*2160, 1920×1080, 1024×768 1280×1024,1280×720, 21) Must support recording resolution upto 32MP 22) Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode 23) When alarm recording is enabled and an event occurs, you can click the alarm icon on monitoring page to view the alert details. The snapshot function is supported on monitoring and playback page 24) The Network Video Recorder (NVR) shall be configured to send email whenever a system message is created or an alarm event occurs. The email server shall be a valid SMTP server. Each recipient email address shall be configured to receive any combination of critical, warning, or informational messages or alarm notifications. When an alarm occurs, the email message includes the NVR name, time of alarm and a list of camera that is configured to record upon alarm

50 DSR-40.11 Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) with camera licenses to record for all channels having specifications and features etc as mentioned below : 1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses to record per NVR and to provide a live view, storage and simultaneousl Multi-channel playback of all IP camera or more and must be ONVIF with minimum support of 384 Mbps incoming Bandwidth. 2) NVR should support video compressions : H.265 or better, H.264, MJPEG. 3) Must support 1 channel RCA Input, 2 channel RCA Output for Two-way Talk with G.711U/A, G.711u, PCM, G726 audio compressions. 4) Intelligent auto power on when power resumes after power outage. 5) Storage: It should support minimum 8 SATA Slots with 20TB capacity/ Slot and RAID support of RAID 0/1/5/6/10. 6) Connectivity Interface : 2 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232, 1x eSATA Port 7) Backup Interface : Its should have 4 Nosx USB port (2x USB3.0, 2xUSB2.0)

8) Video Output Ports: 2x HDMI and 2 VGA 9) Alarm Ports: It should have 16/8 Ch In/ Out ports to connect various type of external sensors and output devices like hooter/ Siren etc. 10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated mobile number for power failure, HDD failure, vandalism, tempring, network disconnection and panic 11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for alerts and viewing. 12) Protocols: HTTP, HTTPS, TCP/IP, IPv4/IPv6, UDP, DHCP, DNS, SMTP, UPnP, IP Filter, PPPoE, FTP, DDNS, Alarm Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for remote monitoring without any public IP need. 13) Standards: CE, FCC, RoHS, BIS Certified 14) Power Supply : Should support AC100-240V, 50/60Hz Power supply.

15) Operating Condition : -5°C to 50°C, humidity 90% (max) (non-condensing) 16) The VMS application shall support all the features & functionalities of the offered cameras. 17) VMS should consist Licenses for all channels to record Cameras with General, motion detection, intelligent, alarm and POS recording modes. VMS should be provided with Camera Licenses , with no dependency of VMS licenses by binding with the MAC address of the cameras to achieve the functionality. 18) The NVR OEM shall be responsible for providing a mobile application compatible with both Android and iOS devices, enabling remote monitoring and playback of cameras/NVR footage. 19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public IP address for remote monitoring over the Internet. 20) Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode 21) It should support Resolution: 32MP; 24MP; 16MP; 12MP; 8MP; 5MP; 4MP; 1080p; 720p; D1; CIF; QCIF 22) When alarm recording is enabled and an event occurs, you can click the alarm icon on monitoring page to view the alert details. The snapshot function is supported on monitoring and playback page

23) The Network Video Recorder (NVR) shall be configured to send email whenever a system message is created or an alarm event occurs. The email server shall be a valid SMTP server. Each recipient email address shall be configured to receive any combination of critical, warning, or informational messages or alarm notifications. When an alarm occurs, the email message includes the NVR name, time of alarm and a list of camera that is configured to record upon alarm 24) It should have Web and GUI interface. 25) Built-In Artificial Intelligence: NVR should have built-in AI :-- 2 Channel face detection and recognition, - Minimum 4 Channel perimeter protection, - Minimum 8 Channel Smart Motion Detection 26) Face Recognition Database Capacity: It should support total Blacklist and Whitelist capacity of Minimum 20,000 Faces or more with Face Detection speed of 12 face images/sec and facility to add Name, gender, birthday, address, credential type, credential No., countries & regions and state to each face image. 27) Face & Human Attributes Search: Search Pictures/ Video by Gender, age group, glasses, expressions, face mask, beard, Top color, top type, hat, bag, age, gender and umbrella. 28) ANPR Capability: It should support ANPR Camera with License plate, plate color, vehicle body, vehicle model, vehicle logo, calling, seatbelt, vehicle registration location etc vehicle attributes

29) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR alarm, Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal behavior of fan, cybersecurity exception 30) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and email. 31) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall Detection, People Approach Detection, People No. Exception Detection, People Staying Detection, Violence Detection. 32) Smart playback function: Should support smart search for the selected area in the video and smart playback to improve the playback efficiency 33) VCA (Video Content Analytic): Should support multiple video contented analytics based on camera analytics 34) Analytics by NVR: Perimeter protection and face recognation

51 DSR-40.11.1 32 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16/25/32(36), 2nd screen: 1/4/8/9/16 1 64784.00 Each 64,784.00

52 DSR-40.12 Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications.

53 DSR-40.12.1 4TB (Terabytes) 1 13943.00 Each 13,943.00

54 DSR-39.1 Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 0C to +50 0C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/IPv6 Interface : minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.

DSR-39.1.1 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+. 2 35091.00 Each 70,182.00

55 DSR-42.4 Supplying, Installation, Testing and Commissioning of following size LED display (LED monitor) industrial grade with 3840x2160 resolution or better, USB playback, bluetooth and miracast connectivity, 4X HDMI 2.0, DP 1.2, HDR 10/10+, brightness: 500-nitsor better, Video wall mode should be available, contrast ratio: 1200:1, OPS slot, viewing angle (H/V): 170°/ 170°, response time less than 12ms, Display control shall be on monitor screen and programmable with remote (remote shall be supplied with system), Key Board, Optical Mouse, etc. as required.

DSR-42.4.1 32 Inch or larger 1 39590.00 Each 39,590.00

56 1.58 Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required.

1.58.1 1 run of cable 100 52.00 Metre 5,200.00

57 DSR-39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.

58 NS SITC of HDMI cable 5 metr as required. 1 2850.00 Each 2,850.00

59 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

60 DSR-39.18 Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required.

61 DSR-39.15 Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required. 34 302.00 Each 10,268.00

62 NS Supply , Installation , Testing and Commissioning of loaded 24 port CAT6A jack panel for CAT6A cable termination at rack end. Approved 2 4500.00 Each 9,000.00

63 DSR-39.13 Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required

39.13.1 Copper Patch Cords of length 1m (3ft) 34 173.00 Each 5,882.00

64 DSR-39.13 Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required

39.13.2 Copper Patch Cords of length 3m (10ft) 34 405.00 Each 13,770.00

65 NS Supply , Installation , Testing and Commissioning of 1, 2 and 4 port face plate white for I/O fixing at user side. Approved Makes: Belden/Siemon/Panduit/Leviton 34 45.00 Each 1,530.00

66 DSR-39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.

67 39.5 Supplying, installation, Testing and commissioning of 10 Giga Bandwidth Data Centre Network Switch of 48port Layer 3 having features and specifications etc. as mentioned here under: - ToR/EOR/Core Network Switch 48x 10GbE SFP+, 6x 100GbE QSFP28, RPS, with Console Port, Management Port and 1 x USB 2.0 Type A port, The switch must provide a switching capacity of no less than 2.16 Tbps and a forwarding rate of at least 1600 Mpps, ensuring non-blocking performance for high-bandwidth applications. It should support hot-swappable dual power supply modules (AC or DC) for 1+1 redundancy and load sharing, as well as hot-swappable, front-to-back airflow fan trays with N+1 redundancy to ensure continuous availability. IEEE 802.1X support for port-based and MAC-based authentication should be available, along with integration for RADIUS and TACACS+ authentication services. 2 1055981 Each 2,111,962.00

Guest VLANs, DoS prevention, and management access restrictions are essential. SNMP v1/v2c/v3, syslog, sFlow, and support for autoconfiguration via DHCP. Support for OpenFlow v1.4, Netconf/YANG, and LLDP is required for modern network automation. Support ONIE (Open Network Install Environment), IEEE 802.1Q bb Priority-based Flow Control (PFC), OpenFlow v1.4, ERPS, IPv6 Tunneling, IP interfaces and supported, VXLAN, Private VLAN, Multicast VLAN, Guest VLAN Double VLAN (Q-in-Q), RoCEv2, PIM-SSM/SM, MSDP. Support High Availability with MLAG/VSS and Layer 2/3 VPNs Critical for Multi-tenant, Virtualized, and Containerized Environments. BGPv4/v6, OSPFv2/v3, IS-IS, RIPng. VRRP, ECMP, BFD, and route redistribution for high-availability routing. Support flexible routing domains and secure inter-segment traffic flow. Certifications: CE, FCC, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.

68 DSR-39.7 Supplying, Installation, Testing and commissioning of indoor Wireless Access Point for Low Density use having features and specifications etc. as mentioned here under - Dual-band Wi-Fi6 (802.11ax) 574Mbps (2.4GHz) + 1200Mbps (5GHz), WI-FI 6 Certified, 1 x RJ45 console port, 1G LAN POE Port, factory reset, WPA/WPA2/WPA3™ Personal/Enterprise, WEP 64/128-bit, SSID broadcast disable, MAC address access control, Internal RADIUS server, SNMP, Customizable Captive Portal, Auto Channel, Works as Access Point, WDS, WDS with AP, Wireless Client, Web (HTTP), Secure Socket Layer (SSL), Traffic control, Support ATF/Fast Roaming/Band Steering, Supports enhanced security – WPA-PSK/WPA2 PSK/WPA3-PSK and RADIUS client, and Cipher negotiation, and MAC/ IP ACL for networks, Certifications: MTCTE, CE, FCC. Should also work as Standalone and must be Compatible with S/W & H/W Controller with addtional features like - Real-Time Monitoring and Alerts, Rich Advanced Features, Centralized Device Management, Role-Based Administration, Real-Time Monitoring, VLAN and Access Control, Auto RF Management and Bandwidth Optimization, Multi-SSID and Captive Portal Authentication.OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Governmenof India etc. complete as required. 1 22739.00 Each 22,739.00

69 DSR-26.1 Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) ON LINE Uninterrupted Power Supply (UPS) system suitable for Single Phase input, Single Phase output AC Supply. The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. The UPS systems shall be Microprocessor based Digital Control, using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter with PWM (Pulse Width Modulation) Technology. The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE.

The operating efficiency of the UPS systems shall be >95% at 100% non-linear loads. Current total harmonic distortion(ITHD)/ total demand distortion (TDD) on the input grid shall be < 5% at 100 %load. (The required LC filters shall be included in UPS cost), extreme power factor kit to be include to limit the input pf to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ) however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitable for incoming supply AC single phase 160-270V 50 Hz and delivering output AC supply true sine wave single phase 220/230/240 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins and 150% for 1 minute. Operating temperature 0 to 40 0C, Relative humidity 0-95% non condensing, noise level less than 60db at 1 meter distance, Protection for Under voltage, over voltage, abnormal output voltage, battery over charging, output over current, short

circuit, battery deep discharge , 10 KV surge. Display for watt/VA,Amp and Voltage power parameters etc. UPS shall comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part Iand Part 2, it shall be a Voltage and Frequency Independent (VFI) type UPS (as per standard IEC 62040-1, 2 & 3) . The UPS should be with IGBT Based Inverter Technology, Communication RS232/ RS485/ SNMP port open protocol for BMS integration as per approved by Engineering in charge. Required battery racks, DC breaker of suitable rating and interconnecting copper conductor cable of suitable size and connectors and all required accessories are inclusive in the cost. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc

70 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

FIRE ALARM SYSTEM

71 DSR-28.2.1 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger.The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.

DSR-28.2.1.2 Two Loop Panel. 1 250420.00 Each 250,420.00

72 DSR-28.2.4 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 40 3004.00 Each 120,160.00

73 DSR-28.2.5 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. 2 306.00 Each 612.00

74 DSR-28.2.6 Supplying, installation, testing & commissioning of intelligent addressable programmable sounder complete as required. 2 2787.00 Each 5,574.00

75 DSR-28.2.7 Supplying, installation, testing & commissioning of fault isolator complete with base as required. 2 3434.00 Each 6,868.00

76 DSR-28.2.9 Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed temperature thermistor complete with base as required. 6 2866.00 Each 17,196.00

77 DSR-28.2.10 Supplying, installation, testing & commissioning of addressable fire control module complete as required 2 3156.00 Each 6,312.00

78 DSR-28.2.11 Supplying, installation, testing & commissioning of addressable phone control module complete as required. 2 3432.00 Each 6,864.00

79 DSR-28.2.14 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 2 4063.00 Each 8,126.00

80 DSR-28.2.16 Supplying, installation, testing & commissioning of addressable strobe complete as required. 1 3536.00 Each 3,536.00

81 DSR-28.2.17 Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required. 1 6016.00 Each 6,016.00

82 DSR-28.2.19 Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. 1 1689.00 Each 1,689.00

83 DSR-28.5.1 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. 300 386.00 Meter 115,800.00

84 NS SITC of Delegate Unit/Chairman Unit with Mic D-Cerno combines sleek design with digital signal processing and plug-and-play functionality. Stylish, discreet, and unobtrusive with a low profile: the D-Cerno D SL is at home in any meeting room. The system is completely based on digital signal processing. The result is crystal-clear sound and excellent intelligibility. The system has the added benefit of easy extensibility: increasing or decreasing the number of units is a breeze. It makes D-Cerno ideal for rental use. The D-Cerno D SL is compatible with screw-lock D-MIC microphones in 30, 40, 50, or 70 cm.Benefits » Modern, sleek, and contemporary design » Clear user button layout and feedback » Removable microphone connector: possibility to usedifferent microphone lengths (30, 40, 50, 70, Full Flex) » Easy transport and storage thanks to small footprintand removable microphone » Solid bottom shell adding weight and stability Features » Digital signal processing. Make - Bosch/Televic 9 88600.00 Each 797,400.00

85 NS SITC of Control Unit Plug-and-play approach 19” rack-based design Hybrid ready via direct USB interface Easy to integrate with AES-67 and USB* Ready to record Smart Audio & Control Camera control integration capabilities Fan-less operation Extended power management* Wake-On-Lan Auto Power-on Features » Digital signal processing » Dynamics control » Integrated web server » Integrated recording capabilities* ›Internal storage ›External flash drive via USB-C ›On a PC via multi-channel USB connection » Hands-free mode ›With speaker detection* » DSP mode* » Fail-safe redundancy technology Default digital acoustic feedback reduction » For systems up to 50 units » System volume » Power button* » Recording button* » Secure API ECO mode sets. Make - Bosch/Televic 1 324600.00 Each 324,600.00

86 NS SITC of Audio Conferencing Processor Automatic mixing. Quick set up. Connects 10 Dante audio inputs, 2 analog inputs, USB and a mobile device to an AV conferencing system or a PC-based videoconferencing application Includes Shure developed DSP algorithms to enhance audio quality in AV conferences: 8 channels of microphone processing featuring AEC, noise reduction, and automatic gain control, IntelliMix automatic mixing, matrix mixing, delay, compressor and PEQ Flexible signal routing and connectivity: analog audio (2 block in / 2 block out) to connect to room AV conferencing system; USB (1 in/out) to connect to laptop or room PC; one 3.5 mm TRRS jack to connect to a mobile device to enable an additional participant to join Power-over-Ethernet (PoE+) eliminates the need for an outboard power supply Compact form factor is easy to mount without equipment rack. Make - Bosch/Televic/Harman 1 345500.00 Each 345,500.00

87 NS SITC of 120 Watt Mixer Amplifier High Performance 2 x 120W Mixer Amplifier Auto Load Sensing: 4-16 Ohm, 70V Line (Stereo) 100V Line (Bridged-Mono) Energy smart technology (Green Energy Star & ErP 1275/2008/EC compliant) UMAC™ Class-D – full bandwidth PWM modulator with ultra-low distortion DanteTM/AES67 inputs available* (D version) Individual volume control, standby, 80Hz High Pass Filter Short circuit protection, DC protection, under voltage protection, temperature protection, overload protection UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and integral standby converter Rack-mountable 1RU 1/3 space, wall and table mount options available. Make - Bosch/Televic/Harman 1 48900.00 Each 48,900.00

88 NS SITC of 12 Watt Ceilling/Cabinet Speaker premium quality ceiling speaker with a wide range of installation and wiring possibilities. As a 16Ω loudspeaker up to four units can be connected to achieve a 4Ω load to an amplifier. This allows for up to eight speakers to be connected to a stereo amplifier with the result being a very high fidelity distributed system. Multiple 70/100 volt tapings and also an EQ contour can be selected from the front baffle of an installed speaker. This allows for fine tuning after installation if desired. Make - Bosch/Televic/Harman 8 8450.00 Each 67,600.00

89 DSR-28.5.3 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

DSR-28.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm 500 61.00 Meter 30,500.00

90 NS SITc of LAPEL MIKE , 1 x SR45 receiver 1 x PT45 body-pack transmitter 1 x C544 L head-worn microphone 1 x Universal power supply with us/UK/EU adapter, 1 x AA size battery 530, 025 - 559, 000 MHz MAKE - HARMAN/BOSCH 1 48600.00 Each 48,600.00

91 NS SITC of HANDHELD MIKE, 1 x SR45 Receiver, 1 x HT45 Handheld transmitter 1 x Stand adapter, 1 x Universal power supply with US/UK/EU adapter, 1 x AA size battery 530,025 - 559,000 MHz. MAKE - HARMAN/BOSCH 1 46500.00 Each 46,500.00

92 DSR-17.1 Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc. as required. 26 54280.00 kWp 1,411,280.00

a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversione fficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Further, each PV module used in any solar power project must have Radio frequency identification tag with information such as name of manufacturer, month and year of manufacturing, country of origin (separately for Solar cell and module), I-V curve, Unique Serial No and Model No of the module, Wattage, Im, Vm and FF, name of test lab issuing IEC certificate.

b)Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 415 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC with a variation of 10% at nominal voltage. Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 0C, Minimum IP-65 for outdoor and Minimum IP 21 for indoor, Built-inmeter and data logger, MPPT, switching devices IGBT/MOSFETs and controller Microprocessor /DSP. operation including wake-up, synchronization & shutdown. The PCU shall be able to withstand unbalanced load conforming to IEC standard with shutdown/standby mode. It must be provided with grid islanding along with manual disconnect pole isolation switch besides automatic disconnection. Minimum protections: Mains Under / Over Voltage, Over current, Over/Under grid frequency, Over temperature, Surge voltage induced at output due to external source, Short-circuit, Lightening, Anti Islanding (for grid synch. Mode) and other protections as per applicable standards. LCD/LED display of minimum parameters: DC input voltage, DC current, AC Voltage and current (all 3 phases, in case of 3 phase), Instantaneous & cumulative AC output power, Daily DC energy produced and other parameters applicable standard. Communication interface RS 485 / RS 232.

c) Module mounting structure: The roof top solar plant generation units shall be installed by using supporting Aluminium/Galvanized MS structure (mass of zinc coating shall be as per IS4759 ) having minimum head room clearance of 2.4 meter above the terrace level / ground level. The mounting structure would be designed to sustain wind load and seismic parameter of the site of installation. All the structure shall be design as per applicable BIS code and the material shall also confirm the applicable BIS Code. Structural material shall be corrosion resistant and electrolytically compatible with the materials used in the module frame, its fasteners, nuts and bolts. The suitable arrangements for maintenance and cleaning shall be provided.

d) Real time online web interfaced Data Monitoring System complete with accessories for various parameters such as Solar Irradiance, temperature, AC Output Voltage and current, Output Power, Power factor, DC Input Voltage and Current, Time Active, Time disabled, Time Idle, Power produced and other parameters as per standard practices. e) Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and otheraccessories etc. as required. Each junction box shall be made of GRP/FRP/Powder Coated Aluminium /cast aluminium alloy with full dust, water & vermin proof arrangement with High quality Suitable capacity Metal Oxide Varistors(MOVs) (semiconductor diode with resistant applied voltage)/ surge arrestors and suitable Reverse Blocking Diodes, isolation switches isolate the DC input to Inverter, copper bus bar etc

f) Lightning, surge voltage protection, earthing protection and grid islanding. g) Cables: Connections & Interconnections by required size IR/UV protected XLPE insulated copper conductor 1.1 kV grade armored power and control cables(ISI Marked) along with supplying & fixing of necessary channel/conduit, GI cable trays, supports, lugs, thimble and other accessories etc. as required. h) DC Distribution Board And AC Distribution Panel Board: IP65, free standing, metal cladded, having copper bus bar, having required protection and control gears, connection-interconnection, etc. as required. Make-Tata Power/Adani/Vikram solar/Waaree/UTL

93 DSR-32.2 Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year OriginalEquipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature).

DSR-32.2.4 2.0 TR with 5 Star BEE Rating 20 57396.00 Each 1,147,920.00

94 DSR-31.14 Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

DSR-31.14.3 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm 50 346.00 Meter 17,300.00

DSR-31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm 50 615.00 Meter 30,750.00

95 NS Supply and additional refrigerant charge of refrigerant R410/410A & equivalent Eco friendly green gas to compensate the additional piping done at site fot all systems including testing commissioning as required 2 1695.00 Kg 3,390.00

96 NS Supply and fixing of 20/24" ready made M.S. prepainted wall stand structure suitable for 1.5/2.0 TR split AC machine including all accessories. 20 1000.00 Each 20,000.00

97 NS Supply Installation testing and commissioning of Automatic Voltage Stablizer of capacity 5 KVA, Input voltage -130 +/- 10% and output-220 V +/- 10% of capacity & input range 130V to 280V . 20 5800.00 Each 116,000.00

98 NS Providing and fixing of CPVC, 6Kg/cm2 drain water piping with fittings, support and insulated with 6 mm thick closed cell elastomeric nitrile rubber insulation complete as per specifications.

Electrical Amounr Rs.- 9,758,235.00

TOAL AMOUNT OF BOQ (CIVIL+Fire Fighting+furniture+ ELECTRICAL ) Rs= 46,929,106.00

EXECUTIVE ENGINEER

BUILDING DIVISION, MOTIHARI

Material Statement

Sl. No. Description Quantity Unit Consumption of Materials

Cement (MT) Coarse Sand (cum) Stone Chips (cum) Bricks (nos.) Local Sand (cum)

1 Sand in filling in Foundation & Plinth. 3309.200 cum 0.000 0.000 0.000 0.000 3309.200

2 Brick flat soling 0.000 sqm 0.000 0.000 0.000 0.000 0.000

14 20 mm thick cement plaster (1:6) 0.000 sqm 0.0000 0.0000 0.00 0.00 0.00

16 20 mm thick cement plaster (1:3) 0.000 sqm 0.0000 0.0000 0.00 0.00 0.00

17 12 mm thick cement plaster (1:6) 0.000 sqm 0.0000 0.0000 0.00 0.00 0.00

18 12 mm thick cement plaster (1:3) 0.000 sqm 0.0000 0.0000 0.00 0.00 0.00

19 6 mm thick cement plaster (1:4) 0.000 sqm 0.0000 0.0000 0.00 0.00 0.00

20 Ceramic floor tiles 0.000 sqm 0.0000 0.0000 0.00 0.00 0.00

21 Ceramic wall tiles 0.000 sqm 0.0000 0.0000 0.00 0.00 0.00

23 Plinth protection 0.000 sqm 0.0000 0.0000 0 0.00 0.00

24 Kota stone flooring (1:4) 0.000 sqm 0.0640 0.0000 0 0.00 0.00

25 Kota stone in skirting (1:3) 0.000 sqm 0.0640 0.0000 0 0.00 0.00

26 Neat Cement punning 0.000 sqm 0.0000 0.0000 0 0.00 0.00

CARRIAGE CALCULATION CHART

Sl. No. CARRAIGE OF MATERIALS Lead (Km) Distt. Gr. No. Qty. Unit Rate (Rs.) Amount Avg. KM Coarse Sand Avg. KM Stone Chips Difference in Cement for GAYA Comm. W.r.t. GAYA Difference in Bricks for GAYA Comm. W.r.t. GAYA CEMENT Bricks

1 2 3 4 5 6 7 8 9 10 11 12 13 PPC CEMENT (NEW) Designation 100 A Brick (NEW)

2 Sand (Source - MORHAR ) 52 0.000 CU.M 1274.79 0.00 GAYA 5012.16 GAYA 5023.58

3 Stone Chips (Source -MANPUR) 45 0.000 CU.M 1137.06 0.00 4 P +

ADD EXTRA COST OF MATERIAL FOR GAYA COMM. W.R.T GAYA AS PER SOR BCD

7 Bricks 0.000 THOUSAND 0.00 0.00 0.00

8 Cement 0.000 M.T. 0.00 0.00 0.00 GROUP NO. -

ADD/LESS COST OF STEEL FOR NEW SOR W.R.T OLD SOR +15% CP and Over Head

Multiplying factor 1.0536 for 18% GST (instead of 12% GST as per BCD Analysis 2022) Total (B)= 1,082,473.91

0.000 CU.M 1287.54 0.00 Sl Name of School District Chips Sand Freight Rate (class-150) Distance (Kilometres) FREIGHT PER TONNE

0.000 CU.M 1148.43 0.00 Source By Rail Source By Road Source By Road BLOCK PANCHAYAT DISTRICT Class 150

0.000 THOUSAND 950.70 0.00 1 ACR GAYA Manpur 0 Manpur 40 MORHAR 52.0 Patna 0.00

8mm dia -7092.63 -6167.5 -7163.56 CEMENT Bricks

-70.93 PPC CEMENT (NEW) Designation 100 A Brick (NEW) ( 476 kms.) - ( 500 kms.) 620.40

RURAL PATNA 5699.97 PATNA 5239.11 ( 501 kms.) - ( 525 kms.) 678.90

-88.87 MUZAFFARPUR 5879.30 MUZAFFARPUR 5310.59

-83.98 BHAGALPUR 5799.85 BHAGALPUR 5310.59

-88.81 SAHARSA 5985.99 SAHARSA 5454.66

Carraige for DIET Building 244

Sl Place of DIET Building Division Chips Sand Zone S.B.C Freight Rate (class-120)

Source By Rail Source By Road Source By Road Source By Rail

1 BITE MUSAPUR, KATIHAR PURNIA Mirza Chauki (Pakur) 187 Purnia yard 37 Jagdishpur 94 -- -- IV 7.0 258.00

2 BITE DARIYAPUR, EAST CHAMPARAN MUZAFFARPUR Sheikhpura 162 Betiyah Yard 20 Doriganj 106 -- -- IV 7.0 230.90

3 BITE MADHOPATTI, DARBHANGA DARBHANGA Sheikhpura 152 Darbhanga 16 Lahisari 133 -- -- V 7.0 230.90

4 BALMIKINAGAR, WEST CHAMPARAN MUZAFFARPUR gaya 244 Bapu Dham Motihari Yard 20 Doriganj 214 -- -- IV 7.0 150.20

5 DIET NOORSARAI, NALANDA PATNA Manpur 57 Local river 5 -- -- IV 7.0 0.00

6 DIET NARAR, MADHUBANI DARBHANGA Sheikhpura 152 Khajauli Yard 25 Lakhisarai 135 -- -- V 7.0 230.90

7 DIET TIKKAPATTI, KATIHAR PURNIA Mirza Chauki (Pakur) 187 Purnia yard 37 Jagdishpur 94 -- -- IV 7.0 258.00

8 CHHATAUNI, EAST CHAMPARAN MUZAFFARPUR Tinpahari 50 Bapu Dham Motihari Yard 15 Doriganj 155 -- -- IV 7.0 150.20

9 DIET SONEPUR, SARAN SARAN Sheikhpura 215 Chapra Rail Yard 35 Doriganj 35.33 -- -- IV 7.0 283.20

10 DIET SIWAN, SIWAN SARAN Sheikhpura 215 Chapra Rail Yard 35 Doriganj 35.33 -- -- IV 7.0 283.20

11 DIET PUSA, SAMASTIPUR DARBHANGA Sheikhpura 152 Darbhanga 43 Lakhisari 127 -- -- IV 7.0 230.90

12 DIET DUMRAON, BUXAR PATNA Karvandiya 88 Koilawar 75 -- -- IV 7.0 0.00

13 DIET MOHANIA, KAIMUR PATNA Karvandiya 114 Lakhisarai 90 -- -- IV 7.0 0.00

14 DIET BABUTOLA, BANKA BHAGALPUR Mirza Chauki 65 Jagdishpur 45 IV 7.0 0.00

15 DIET KISHANGANJ, KISHANGANJ PURNIA Mirza Chauki (Pakur) 187 Purnia yard 37 Jagdishpur 94 -- -- IV 7.0 258.00

16 DIET FORBESGANJ, ARARIA PURNIA Mirza Chauki (Pakur) 187 Purnia yard 37 Jagdishpur 142 -- -- IV 7.0 258.00

17 DIET LAKHISARAI, LAKHISARAI MUNGER Shekhpura 44 Lakhisarai 16 -- -- IV 7.0 0.00

18 DIET THAWY, GOPALGANJ SARAN Sheikhpura 215 Chapra Rail Yard 35 Doriganj 35.33 -- -- IV 7.0 283.20

19 DITE MADHUPURA, MADHUPURA PURNIA Mirza Chauki (Pakur) 187 Purnia yard 37 Jagdishpur 104 -- -- IV 7.0 258.00

20 DITE TARAR, AURANGABAD GAYA Karbandiya 62 Koilawar 99 IV 7.0 0.00

CARRAIGE COST OF MATERIALS ")

1. Coarse Sand = Lead - ( 52 kms.) Doriganj

2. Stone Chips = Source - Manpur Lead = 1 US+ 4 P+ 244 R+ 20 P Kms

Quarry to Railway yard Lead :- 5 Kms.

Unsurface Road :- 8 / 5 x 13.50 x 1 = Rs. 21.60

Surface Road :- 8 / 5 x 11.20 x 4 = Rs. 71.68

Loading at quary site and unloading

at Manpur Rly. Yard. = Rs. 195.10

Loading on Railway wagon and

unloading at Manpur Yard. = Rs. 195.10

Manpur to Manpur Railway yard distance = 244.00 Kms

Rly. Frieght Rates for 244.00 Kms. = Rs. 425.30 / MT

Add 2% development surcharge = Rs. 8.51

Add 7% Busy season surcharge = Rs. 30.37

Terminal Charge (OTC + DTC) = Rs. 80.00 / MT

Rly. Frieght in M³

So, carriage cost from Manpur Rly yard to Manpur Rly yard

Manpur to Work Site By Road, Lead 20 Kms (P)

Carriage Cost = 8 / 5 x 11.20 x 20 + 195.10

Total Carriage Cost = Rs. ( 1471.17 + 553.50 )

3. Local Sand = Lead - ( 2 P + 1 K )

4. Bricks = Lead - ( 7 P + 1 K )

= 832.11 / thousand

= 941.28 / thousand

5. Cement / Steel = Lead - 3 Kms (P)

Cement Carriage = Rs. 492.75 / 20

Cost / Bag = Rs. 24.64 / Bags

Junior Engineer Assistant Engineer Executive Engineer

Carriage of Materials

Name of Material : Sand

Truck Capacity 5 Cum

Loading Unloading 121 Cum

Distance from source to work site

Pucca = 45 Km. Kaccha = 0 Km.

Add labour cess @ 1% = 5.46

Carriage of Materials

Name of Material : Chips

Truck Capacity 5 Cum

Loading Unloading 121 Cum

Distance from source to work site

Pucca = 168 Km. Kaccha = 0 Km.

Add labour cess @ 1% = 17.07

Total = 1723.99

Carriage of Materials

Name of Material : Bricks

Truck Capacity 5 Cum

Loading Unloading 121 Cum

Distance from source to work site

Pucca = 7 Km. Kaccha = 1 Km.

Add labour cess @ 1% = 4.76

Carriage of Materials

Name of Material : Local Sand

Distance from source to work site

Pucca = 2 Km. Kaccha = 1 Km.

Add labour cess @ 1% = 1.63

Carriage of Materials

Name of Material : Rabish

Distance from source to work site

Pucca = 7 Km. Kaccha = 1 Km.

Add labour cess @ 1% = 2.10

Carraige for exmaination Hall

Sl Name of College Chips Sand

Source By Rail Source By Road Source By Road Source By Rail

1 Rajendra College, Chapra Sheikhpura 215 Rail Yard Chapra 3 Doriganj 14 -- --

2 R. K. College, Madhubani Sheikhpura 207 Khajauli Yard 31 Quil 180 -- --

3 M S College, Motihari Sheikhpura 246 Bapu Dham Motihari Yard 3 Doriganj 119 -- --

4 MJK College, Motihari Sheikhpura 289 Betiyah Yard 4 Doriganj 194 -- --

5 RD&DJ College, Munger Mirza Chauki 119 Munger Yard 5 Quil 55 -- --

6 LS College Muzaffarpur Sheikhpura 162 Narayanpur Anant 5 Doriganj 105 -- --

7 Sunderwati Mahila college, Bhagalpur -- -- Mirza Chauki 65 Jagdishpur 50 -- --

8 CM Science College, Bhagalpur Sheikhpura 152 Darbhanga 3 Quil 153 -- --

9 Rajendra Mishra College Saharsa Sheikhpura 194 Saharsa 1 Quil 125 -- --

10 HD jain College Arrah -- -- Karvandiya 114 Koilawar 25 -- --

11 Purnia College, Purnia Mirza Chauki 187 Purnia Yard 5 Chapra 74 -- --