Electrical renovation and modification work of transit accommodation at CSIR-CGCRI, Naroda Centre, Ahmedabad, Gujarat.

Amount

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

Suppliying and Fixing of 32mmx12mm double lock PVC casing-capping

Suppliying and Fixing of 25mmx12mm double lock PVC casing-capping

Suppliying and Fixing of 20mmx12mm double lock PVC casing-capping

Suppliying and Fixing of 20mm corrogated polypropylene fire retardent flexible conduit

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1 way 5/6 A switch

2 way 5/6 A switch

15/16 A switch (2 module)

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

TV antenna socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing 75 mm X 75 mm X 50 mm PVC box including connections etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

Supply of the following Items make as per attached make list:-

1200 mm Celing fan, Opal white

300 mm Heavy duty exhaust Fan, 1ph., 1400 rpm

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, 415 volts, "C" curve, 10KA breaking capacity, FP miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40/63 Amp Four pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supply and fixing of the following Items make as per attached make list:-

2.5 Sqmm Cu. Pin type socket

4 Sqmm Cu. Pin type socket

Supplying and fixing of following Luminaries having min. CRI 70 (Havells/ Philips make or equivalent strictly approved by engineer in charge)

10W batten LED complete set with minimum efficacy of 100 Lumens per watt, THD less than 10%

20W batten LED complete set with minimum efficacy of 100 Lumens per watt, THD less than 10%

Energy saving and environmental friendly long life 45 W LED streed light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with toughned glass having bottom opening separate driver compartment with IP66 protection and impact rsistance of IK07

Energy saving and environmental friendly long life 60W LED flood light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with toughned glass having bottom opening separate driver compartment with IP66 protection and impact rsistance of IK07

Supply and fixing of outdoor type (IP66)SMC Junction Box, hinged type having minimum dimension of 230x170x105 (HxWxD) for street light terminations

Supply and fixing of 25 Amp Automatic Single phase 2 module motor starter(white) along with 2 Module Plate with Frame (white) and 2 Module GI box, surface/ recess mounted, as required.

Supply & fixing of telephone distribution box made of M.S sheet (14 SWG) suitable size (as per direction of engineer -in - charge) with Krone modules Elmax / Equivalent make with hinged door and lock with key and two coats of synthetic enamel paint (Siemens Gray/ Light grey) with following termination capacity i/c necessary connections of cables.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supply, Installation, Testing, Commissioning of 15 ltrs. Geyser, vertically/ horizontally mounted having capacity of max. 2.5 KW (V-230, F-50Hz), temperature range will be 25-75 degC, Mild Steel with GlassLined Coating incoloy Long life heating element and warranty should me minimum 2 years.

Dismantling and reinstallation of 1.5/2.0 TR High wall Split type AC Machines for shifting the same from one place to other place. The job is including gas charging and any other materials related to this work.

Supply, Installation, Testing, Commissioning of Outdoor type Back light(having min. illumination level of 400 lux) flex ( min 250 GSM) glow sign board having dimensions of 18 ft. x 3.5 ft. signage.

Supply, Installation, Testing, Commissioning of Outdoor type Back light (having min. illumination level of 400 lux) flex ( min. 250 GSM) glow sign board having dimensions of 8 ft. x 6 ft. along with MS pipe/angle structure duly GI coated with min. 75 micron.

M/s. Development Electrical