CERTAIN REPAIRS TO TOILETS OF MAIN BUILDING AND DOUBLE STORY TOILET COMPLEX AT KV OKHA UNDER GE (N) PORBANDAR

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry bedded in any mortar complete all as specified.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc, Complete all as specified and directed.

Glazed ceramic tiles, coloured (light colour as approved), of size 450 x 350 x 7mm thick on vertical surfaces such as in skirting / dado etc set and jointed in cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed.

Non skid Ceramic coloured tiles of 7to 8mm thick (area of each tile exceeding 0.06 Sqm but n.exc. 0.11 Sqm) as in floor set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 20mm thick bedding layering cement mortar (1:6) complete all as specified.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

75 mm thick cement concrete type D-2 (1:4:8) mix using 40 mm graded stone aggregate as in sub base all as specified & directed by Engr-in-charge.

Rendering 15 mm thick on fair faces of stone masonry surfaces or concrete surfaces on wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 10mm thick on fair faces of concrete surfaces as on ceiling surface, facia and projection of slabs, finished surfaces even and smooth without using extra cement, in CM (1:3) complete all as specified and directed.

Preparation of newly plastered surfaces and applying three coats of white wash on wall complete all specified and directed.

Preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all specified and directed.

Vitreous china white squatting pan Orissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore ‘P’ trap SWR (PVC) with 550 to 600 mm long neck for connecting WC to branch piece with cement joints fixed in repair complete all as specified and as directed.

Vitreous China wash down water closet (Pedestal pattern) white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at top including fixing bolt Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete, fixed in repairs, complete all as specified and directed.

Health faucet of high quality with 1mtr long flexible tube and wall hook complete, fixed in repairs, all as specified and as directed

Vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including waste pipe, brass coupling, 32 mm bore chromium plated brackets, restoring all connections, fixed in repairs,complete all as specified.

PVC (SWR) floor trap, diameter of outlet 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed.

Bib taps chromium plated, fancy type with crutch or butterfly handle, screwed down for iron pipe, 15 mm bore of pipe fixed in repairs, Complete all as specified and directed.

PVC low level flushing cistern 10 litres capacity valve less symphonic action type, ISI Marked white with inlet, ball valve, float and handle including brackets fixed in repairs complete all as specified and directed.

15mm bore stop valve fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, fixed in repairs, complete all as specified and directed.

Brass Chromium plated shower rose 125mm dia with swivel joints, including shower arm 15mm dia, 195mm long with 45 degree bend and flange of CP brass fixed in repair complete all as specified.

Pillar tap brass 15mm bore, with capstan head chromium plated fancy type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

Stop cock(concealed type) brass, chromium plated, fancy type, screwed down, high pressure, for 15mm bore dia of pipe, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

PVC connection 600 mm long, 15mm size with PTMT nuts complete, fixed in repairs,complete all as specified and directed.

Grating square 150 mm size of PTMT openable type (Minimum weight 100gms) ,fixed in repairs,complete all as specified and directed.

Dismantling of water tank RCC/ HDPE/Ferrocrete of size exc 500 ltrs n'exe 1000 ltrs cap Complete all as specified and directed.

Rotational moulded polythene water storage tank double layer, ISI Marked of capacity 1000 litre cylindrical vertical with closed top hoisted in position including supply and fix 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including complete including dismantling of existing tank of any description, capacity complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified.

CPVC water pipes SDR 11 & Plain CPVC SDR 11 fittings 25 mm dia in any length including all fittings complete fixed on walls, ceiling, roofs or laid in floors complete all as specified.

CPVC water pipes SDR 11 & Plain CPVC SDR 11 fittings 32 mm dia in any length including all fittings complete fixed on walls, ceiling, roofs or laid in floors complete all as specified.

CPVC ball valve 25 mm bore fixed in CPVC pipeline fixing with solvent solution complete all as specified and as directed.

110mm bore PVC (SWR) pipes of pressure rating 6 kgf / cm2, single socketed in any length with rubber ring,laid in trenches complete all as specified and directed.

75mm bore PVC (SWR) pipes of pressure rating 4 kgf / cm2, single socketed in any length with rubber ring, joints laid in trenches or in floor complete all as specified and directed.

110 mm bore PVC (SWR) bends, diminishing pieces or tapers, fixed in repairs, complete all as specified and directed.

75 mm bore PVC (SWR) bends, diminishing pieces or tapers, fixed in repairs, complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal of nominal bore 110mm fixed in repairs, complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal of nominal bore 75mm fixed in repairs, complete all as specified and directed.

110mm bore PVC (SWR) vent cowl, complete all as specified and directed.

75mm bore PVC (SWR) vent cowl, complete all as specified and directed.

Vitreous china (White) half stall urinal with grating, union for discharge pipe, spreader, incl 40mm dia PVC heavy duty waste pipe upto floor trap, fixing with brackets, PVC automatic flushing cistern 5L,flush pipe, union for discharge pipe, connection pipe , Incl fixing in Urinal spreader and restoring connection, fixed in repairs complete all as specified and as directed by Engineer in Charge

20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, Urinal Partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite Complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and any position etc. complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 Sqm each with shutter (without taking off Shutter) complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm and n.exc 4 Sqm each with shutter (without taking off Shutter) complete all as specified and as directed.

2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Factory made 35mm thick, 2nd class hard wood , plain framed, panelled shutters, (two panel) with lock rail and, panels shall be of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

PVC solid door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as per specification mentioned in preambles of section-8 and drawing shown on page No 160 of SSR Part-II (2010) and complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain cover PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet beading and joined together with solvent cement supplying l and fixed in the frame at site as per specification and drawing complete all as specified and as directed.

Powder coated aluminium anodised frame of size as directed for doors, windows and partitions with one or more rebates including necessary joining cleats, glazing clips, rubber neoprene packing, etc complete with powder coating of approved colour minimum thickness 50 micron complete all as specified and directed.

4mm thick figured glass, plain ordinary quality not exc 0.5sqm in each pane, fixed to aluminium sections, with neosprene gasket complete all as specified.

Aluminium anodized Deco grills 7.50 mm of Design No DG 104 with suitable size F & H sections as required to aluminium/wooden windows incl fixing embedded in concrete complete all as specified and directed.

100mm Butt hinges medium weight, cold rolled, stainless steel, and fixed complete all as specified and directed.

150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm long with fixing clips of sheet, cast or extruded sections fixing bolts and sliding bolts of extruded section or cast-aluminium alloy complete all as specified.

Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all specified and directed.

Rendering 20 mm thick in two layers (15+5) ,on fair faces of stone masonry surfaces or concrete surfaces in 15mm thick in CM 1:6 backing coat and 5mm thick in CM 1: 4 mixed with water proofing compound finished even & smooth with out using extra cement including use of water proofing compound in outer layer, complete all as specified and directed. Note- Water proofing compound use against this item measured and paid separately.

Supply only integral water proofing compound.

Preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion weather proof antifungal paint over a coat of compatible primer, complete all specified and directed.

Complete removal of existing treatment of old plastered or unplastered surface of walls and applying two coats of white wash on wall complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment of old plastered or unplastered surface of ceiling and applying two coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface of square, rectangular or polygonal concrete, complete all as specified and as directed.

Use and waste of Form work to sides of concrete foundations, footings, bases of columns and plinth beams and similar work, complete all as specified and directed .

Mild steel CRS bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild steel CRS bars 8mm dia as in stirrups spacer and binder, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Reinforced cement concrete 1:1 1/2:3 type A1 (using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footing plinth beams, bases for column etc. complete all as specified and directed.

Reinforced cement concrete 1:1 1/2:3 type A1 (using 20 mm graded crushed stone aggregate) as in as in Columns, Pillars, Piers, Posts and Struts complete all as specified and directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation, and getting out in hard / dense soil, complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/disintegrated rock, complete all as specified and directed.

Removing excavated material (soil)to distance exceeding 50m but not exc 250 m and depositing where directed at a level not exc 1.5m above the starting point.

Dismantling SWG pipe along with fitting of size up to 150 mm dia, below or above ground level ,jointed in cement mortar and taking out complete all as specified.

Reinforced concrete pipes, class NP2 150mm, laid and jointed with collars in cement mortar 1:1 complete all as specified and directed.

Cutting into existing sewage line manholes for connecting new drains of any dia of pipe and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate finished smooth and reforming benching as required for 150mm dia.complete all as specified.

Plain cement concrete 1:3:6 type C2 (using 40mm graded aggregate bed to drain pipes including packing under and haunching against the sides of pipes of 150mm bore after they are laid and tested complete all as specified and as directed.

75mm thick PCC 1:3:6 , type C-1 using 20mm graded stone aggregate as in plinth protection finished even & smooth without using extra cement making 10mm wide joints at every 3m interval and at every corner, filled with mixture of bitumen and sand (1:1) complete all as specified.

PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in concrete padding, 40mm average thickness laid to required slope, including finishing the concrete surfaces fair and even without using extra cement, including mixing WPC @ 3% of cement (WPC shall be Paid separately), complete all as specified and as directed.

water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment / specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 3 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less 150 gms per sqm. Polymeric membrane shall be taken to a height of 60 cm 9 minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note:- (i) Laying of APP based membrane shall be done by torch on method and as per manufacturer's instructions. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and all overlaps and joints are properly sealed as per manufacturer's instructions. (iii) Applying two coats of Bituminous aluminium paint on top of APP membrane.

Cleaning surface removing all dirt by brooming and washing and priming evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m complete all as specified.

Preparation of new or previously untreated membrane surfaces of any description, not otherwise described and applying one coat of Aluminium paint 0.15 litre / Sqm complete all as specified.

Taking down carefully copper/aluminium point wiring (light/fan, buzzer, socket or power point etc) complete including all fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good the disturbed surface to match with the existing all as specified and directed by Engineer-in-charge.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc including all cutting / chases etc in walls complete all as specified and directed for the following :- One light/ fan point controlled by one one way switch.

Ceiling rose surface Bakelite, 65x50mm, 3 terminals complete all as specified and directed.

Modular white cover plate with frame 3 modules complete all as specified and directed

Modular switch 1 way 6 Amps, 1 modules 230 volts complete all as specified and directed.

3 module flush metal GI/plastic boxes , fixed in repairs, complete all as specified and as directed

E-LITE LED PRIDE PLUS 18 Watt 6000 K Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with duly prewired and connecting complete all as specified and directed. Make:-Havells Cat no:- LHEXBLP7PN1W018 or its equivalent make specified here in before.

Metal body exhaust fan 300 mm sweep AC, 240 volts consist of Double ball bearing & Louvers metal body, 4 Blades fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable complete all as specified & directed by Engr in charge. Make :Havells ventilair Dx WHT OR eq model of make specified in Appx 'B'.

Harsh Infrastructure

Bharat Enterprise

vishot construction

ARPIT TECHNO INFRA PVT LTD

SURESH ELECTRICALS

OM ENTERPRISE

JAMNAGAR ELECTRIC AND MACHINERY CO

SURAJ ENTERPRISE