REPAIRS TO DAMAGED COMPOUND WALL AND BRIDGE OF JACKWELL AT WATER HEAD WORKS TELWASA AT O. F. CHANDA.

Amount

Cat (A) -Items to be supply and fixing

Demolition of brickwork of any description and in any position not otherwise specifically provided for & removing the rubbish off from the premises not exc. 50 mts. from starting point etc. complete all as per the direction of Engineer-In-Charge.

Demolition of Concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement including removal off rubbish from the site at a distance not exc. 50 mts. from starting point etc. complete all as per the direction of Engineer-In-Charge

Taking down cement plaster on walls including raking out joints, hacking for key etc. complete all as per direction of Engineer-In-Charge

Excavation in trenches in hard/dense soil not exceeding 1.5 mt. wide and not exceeding 1.50 mt. deep for foundation & getting out the soil etc. complete all as per the direction of Engineer-In-Charge.

Excavation in trenches in hard/dense soil not exceeding 1.5 mt. wide and exceeding 1.50 mt. but not exceeding 3.0 m deep for foundation & getting out the soil etc. complete all as per the direction of Engineer-In-Charge.

M & L for moorum filling in floors & paving, laid in layers not exceeding 15 cm thick in each layer, spread, leveled, watering, & rammed, level the surface to a true plain surface etc. complete all as per direction of Engineer-In-Charge.

M & L for hardcore or broken stone of gauge not exceeding 63mm, deposited, spread, leveled in layers not exceeding 15 cm thick, watered & leveled to a plain surface etc. complete all as per the direction of Engineer-In-Charge

M & L Cement concrete in foundation, Type-B-2 1:2:4 (40 mm graded aggregate) for filling and mass concrete as in foundation, compaction, curing etc. complete all as per the direction of Engineer-In-Charge

S & F TMT bars 10 mm dia. & over, ISI mark, cut to length, bent to shape required, including cranking, binding with mild steel wire (annealed) not less than 0.9mm dia. etc. complete all as per direction of Engineer-In-Charge.

S & F TMT bars 6 to 8 mm dia., ISI mark, cut to length, bent to shape required, including cranking, binding with mild steel wire (annealed) not less than 0.9mm dia. etc. complete all as per direction of Engineer-In-Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc. complete all as per the direction of Engineer-In-Charge

M & L RCC Foundation using design mix cement concrete M-25 (20mm graded aggregate) for rafts, footings, foundation beams & plinth beams etc. compaction, curing etc. complete all as per direction of Engineer-In-Charge.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surfaces including all necessary accessories etc. complete all as per the direction of Engineer-In-Charge

M & L for RCC Column using design mix cement concrete M-25 (20mm graded aggregate), compaction, curing etc. complete all as per direction of Engineer-In-Charge.

M & L for Brickwork with red burnt bricks in C. M. 1:4, straight or curved on plan exc. 6m mean radius including scaffoldings, curing etc. complete all as per direction of Engineer-In-Charge.

Formwork to sides and soffits of coping including supports, overhangs with rough finishes surfaces including all necessary accessories etc. complete all as per direction of Engineer-In-Charge.

M & L for RCC coping over 1.5m span using design mix cement concrete M-25 (20mm graded aggregate), compaction, curing etc. complete all as per direction of Engineer-In-Charge.

M & L for broken glass coping 25mm thick in C. M. 1:3 on top of wall etc. complete all as per the direction of Engineer-In-Charge

S & F mild steel work as in posts, struts in fencing including cutting tops to shape as required, drilling holes, notching for wire etc., flat iron fillets and similar work confirming to Fe-290 Gde E-165 etc. complete all as per the direction of Engineer-In-Charge

S & F Mild steel framed work as in grills, gratings etc. with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, railings and similar work confirming to Fe.290.Gde-E-165 etc. complete all as per the direction of Engineer-In-Charge

Rendering plaster 15 mm thick on fair face of concrete / Brick surfaces in C.M. 1:4 including finishing the surface even and smooth without using extra cement & using necessary scaffolding, curing etc. complete all as per the direction of Engineer-In-Charge

Rendering plaster 15 mm thick on ceiling in C.M. 1:4 including finishing the surface even and smooth without using extra cement & using necessary scaffolding, curing etc. complete all as per the direction of Engineer-In-Charge

M & L for P.C.C. in floor 150 mm thick, Type-B1, 1:2:4 mix (using 20 mm graded aggregate) with finishing the surface of concrete smooth without using extra cement including necessary formwork, compaction, curing etc. complete all as per direction of Engineer-In-Charge.

M & L for forming 12mm thick Expansion joints in 150mm thick concrete floor, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A etc. complete all as per the direction of Engineer-In-Charge.

S & F 1050mm dia. G. I. concertina coil wire fencing over compound wall including necessary welding work with angle to support the wire on wall etc. complete all as per the direction of Engineer-In-Charge

M & L for Galvanised. 2 strand, steel barbed wire 2.24mm dia. barbed with 2mm dia. barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as per the direction of Engineer-In-Charge

M & L Synthetic enamel painting on ironwork – 2 coats over one coat of red primer including all preparatory works, Make- Asian / Berger / Nerolac / Shalimar or equivalent paints of 1st quality shall only be used in the work etc. complete all as per the direction of Engineer-In-Charge

M & L Cement painting on walls of new surfaces – 2 coats over one coat of primer including all preparatory works, Make- Asian / Berger / Shalimar / Nerolac paints or equivalent paints shall only be used in the work, curing wall surfaces etc. complete all as per direction of Engineer-In- Charge

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thickness as in soft/loose soil etc. complete all as per the direction of Engineer-In-Charge

Removing excavated soil materials upto 50 mts. from starting point and depositing where directed at a level not exceeding 1.5 m above the starting point etc. complete all as per the direction of Engineer-In-Charge

M/s Praveen Construction

RAMKANWAR CONSTRUCTION COMPANY

HARIOM ENTERPRISES

G P ENTERPRISES

H.I BOHRA