RUNNING CONTRACT - MAINTENANCE OF TRANSMISSION LINES

Amount

Mace of Pipeline Road

100.98.1008:Engaging Coolie.

2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

2.33.1:Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth

2.33.2:Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth

2.33.3:Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 120 cm girth up to and including 240 cm girth

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

19.15.1:Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) as per standard design.With 20x20 mm square bar

13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

Mace of Transmission Lines

50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

100.98.1009:Engaging Fitter ( grade 1).

100.98.1010:Engaging Assistant Fitter or 2nd class fitter.

OD145899/2023-2024:Replacing Damaged/Rusted Nut and Bolts of flanged joints up to M12 and size up to 150mm (Grade up to 8.8) by Galvanized Nut and bolts without disturbing existing joint including bolt removing charges, cutting-grinding-cleaning charges, cost of all materials (nut, bolt, washer etc.), labor charges, hire charges of tools and plants etc. complete.

OD145900/2023-2024:Replacing Damaged/Rusted Nut and Bolts of flanged joints from M12 to M16 and size up to 150mm (Grade up to 8.8) by Galvanized Nut and bolts without disturbing existing joint including bolt removing charges, cutting-grinding-cleaning charges, cost of all materials (nut, bolt, washer etc.), labor charges, hire charges of tools and plants etc. complete.

OD145901/2023-2024:Replacing Damaged/Rusted Nut and Bolts of flanged joints from M16 to M22 and size up to 150mm (Grade up to 8.8) by Galvanized Nut and bolts without disturbing existing joint including bolt removing charges, cutting-grinding-cleaning charges, cost of all materials (nut, bolt, washer etc.), labor charges, hire charges of tools and plants etc. complete.

OD145902/2023-2024:Replacing Damaged/Rusted Nut and Bolts of flanged joints from M24 to M30 and size up to 150mm (Grade up to 8.8) by Galvanized Nut and bolts without disturbing existing joint including bolt removing charges, cutting-grinding-cleaning charges, cost of all materials (nut, bolt, washer etc.), labor charges, hire charges of tools and plants etc. complete.

OD145903/2023-2024:Replacing Damaged/Rusted Nut and Bolts of flanged joints from M30 to M36 and size up to 200mm (Grade up to 8.8) by Galvanized Nut and bolts without disturbing existing joint including bolt removing charges, cutting-grinding-cleaning charges, cost of all materials (nut, bolt, washer etc.), labor charges, hire charges of tools and plants etc. complete.

OD148845/2023-2024:Servicing of CI Air Valves up to 250mm in Transmission Mains including replacing of AV Balls, cleaning and refixing charges including cost of materials, labor charges, hire charges of tools and plants etc. complete.

OD148848/2023-2024:Servicing of CI Air Valves up to 250mm in Transmission Mains including cleaning and refixing charges including cost of materials, labor charges, hire charges of tools and plants etc. complete.

OD149031/2023-2024:Dismantling C. I. Double Acting Air Valve of approved quality from existing assembly including removing charges of bolts, nuts, rubber insertions etc., complete: 150 mm Double Acting Air Valve. (Derived from Spec 100.32.6)

OD149032/2023-2024:Dismantling C.I. sluice valves from existing assembly including removing charges of bolts, nuts, rubber insertions etc., complete: 150mm diameter, Class I. (Derived from Spec 100.31.1.4)

OD149033/2023-2024:Dismantling C. I. Double Acting Air Valve of approved quality from existing assembly including removing charges of bolts, nuts, rubber insertions etc., complete: 200mm Double Acting Air Valve. (Derived from Spec 100.32.7)

OD149034/2023-2024:Dismantling C.I. sluice valves from existing assembly including removing charges of bolts, nuts, rubber insertions etc., complete: 200mm diameter, Class I. (Derived from Spec 100.31.1.5)

100.31.2.4:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 150mm diameter, Class II.

100.31.2.5:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 200mm diameter, Class II.

100.32.6:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 150mm Double Acting Air Valve.

100.32.7:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 200mm Double Acting Air Valve.

14.46:Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.99.1:Add extra for the rate of Earth Work Excavation to account for the difficulty of excavation and the idling of the labour / machinery.

100.1.2:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth exceeding 1.5m but not exceeding 3m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

OD210749/2023-2024:Providing lead caulked joints to spun iron or C.I pipes and specials including testing of joints but excluding the cost of pig lead: 1200 mm diameter pipe

OD210771/2023-2024:Providing lead caulked joints to spun iron or C.I pipes and specials including testing of joints but excluding the cost of pig lead: 900 mm diameter pipe

18.29:Supplying pig lead at site of work.

HAROON RASHEED K M

Bidder Name

HAROON RASHEED K M

M J Tech Engineering Construction