Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.5 LAccepted-AOC | 1 | Accepted-AOC lowest bid | |
| 2 | 2₹4.6 L+₹11,543.48 (2.56%)Rejected-Finance | 2 | Rejected-Finance Second Lowest |
| Sl No | Description | Qty | Unit | BEST MATERIALS L2 | M S communications L1 |
|---|---|---|---|---|---|
| 1.00Truss work in Anjangadi Subcentre ward 1 | |||||
| 1.00 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.51 | cum | 8,140.68 ₹4,176.17 | 8,000 ₹4,104 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 382.8 | kg | 177.7 ₹68,023.56 | 170 ₹65,076 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 1,101.66 | kg | 184.56 ₹2,03,322.37 | 180 ₹1,98,298.8 Lowest |
| 1.00 | OD519738/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both
120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both
side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard filmof 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch inhorizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and
including cutting tosize and shape wherever required. | 226.98 | sqm | 590.05 ₹1,33,929.55 Lowest | 605 ₹1,37,322.9 |
| 1.00 | OD519830/2025-2026:Ridge caping with pre painted galvanized steel sheets 0.5mm thick 60cm wide including all cost and materials | 12.9 | metre | 666.46 ₹8,597.33 | 350 ₹4,515 Lowest |
| 1.01 | OD519969/2025-2026:Providing and fixing UPVC Rain water collection gutters (150 mm 4kgf/cm2) with all
necessary fittings with clamps at 1 m intervel(12.41.2 modified) | 61.8 | metre | 483.28 ₹29,866.7 Lowest | 500 ₹30,900 |
| 1.01 | 50.18.8.7.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2 | 23.3 | metre | 615 ₹14,329.5 | 450 ₹10,485 Lowest |
Tender Value
₹4.9 L
EMD Value
₹12,164
Closing Date
20 May 2026, 3:00 pmClosed
Assistant Engineer
LID And EW Section, Vatanappally G P
Pro.No.268/26-Truss work in Anjangadi subcenter ward 1-Vatanappally GP
2026_LSGD_850061_1
ET-01/AE/LID AND EW/VTY/2026-27
Open Tender
Civil Works - Buildings
Item Rate
300 days
Vatanappally Grama Panchayat
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,075
Yes
₹12,164
Yes
2 Jul 2026
12 May 2026
21 May 2026
12 May 2026
20 May 2026
12 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Truss work in Anjangadi Subcentre ward 1 | |||||
| 1.001 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | 1 | cum | - | - |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.003 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | - | kg | - | - |
| 1.004 | OD519738/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both
120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both
side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard filmof 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch inhorizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and
including cutting tosize and shape wherever required. | 1 | sqm | - | - |
| 1.005 | OD519830/2025-2026:Ridge caping with pre painted galvanized steel sheets 0.5mm thick 60cm wide including all cost and materials | - | metre | - | - |
| 1.006 | OD519969/2025-2026:Providing and fixing UPVC Rain water collection gutters (150 mm 4kgf/cm2) with all
necessary fittings with clamps at 1 m intervel(12.41.2 modified) | 1 | metre | - | - |
| 1.007 | 50.18.8.7.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2 | - | metre | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1436358.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
integritypact.pdf
Tender Documents • 0.05 MB
PreliminaryAgreement1.pdf
Tender Documents • 0.26 MB
BOQ_1436358.xls
BOQ • 0.23 MB
SBD.pdf
Tender Documents • 2.47 MB
Formoftender1.pdf
Tender Documents • 0.25 MB
Epayment.pdf
Tender Documents • 0.05 MB
Affidavit1.pdf
Tender Documents • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .