MP-LADS-Installation of two 12 M High Mast with 6x 200W LED flood light in Division 53, Ayyanthole, thrissur Corporation

90.15.2.3:Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 100mm top diameter, 360mm bottom diameter thickness 3mm mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system w and including round arm galvanized luminary carriage suitable to install 6/8 nos luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 12 Meters

OD379886/2025-2026:Design and casting of RCC foundation suitable for erection of 12M high mast pole, providing and laying in position M-25 RCC foundation of size as per Technical specification A ( RCC vol.1 M³ & Steel reinforcement 35Kg) including all materials and labour charge of earth work excavation, providing cutting, bending and placing in position reinforcement of cold twisted bar as required with positioning of foundation bolts and providing 50mm dia PVC pipe of suitable length for cable entry and exit as required (According to site conditions of selected locations, the design may be changed)

OD379891/2025-2026:Supply and installation of Feeder Pillar mounted on angle iron frame 32A TPN MCB incomer, 32A 4P RCCB,single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals including providing provision to mount 1 no 3 phase energy meter in a separate compartment along with supply of 32 A cut out fuses, bakelite sheet for mounting the meter etc. as required.

90.15.4.11:Supply Conveyance, installation, testing and commissioning of 200W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD379975/2025-2026:Supply of LED aviation obstruction light and fixing on the top of mast

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

90.12.5.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm

90.6.5.19:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 2.50 sq mm

OD379942/2025-2026:Providing independent ordinary pipe earthing using 2.5 meters of 40 mm dia GI pipe including connection to earth terminal with 25x3mm GI flats with all materials and labour, and other specials such as common salt ,charcoal bolts and nuts etc.