Repairs to floors of kitchen, latrine and bathroom, Wall (Internal and External), Repairs to water pipe lines (Internal and external), Doors and Windows of G1 to 58 at Dum Dum Estate

Amount

M&L for dismantling floor,hearth or wall tiling inccement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of PCC of any description & in any position not otherwise specifically provided for any thickness.

M/L for brushing net cement slurry with 3.0 kg of cement per sq.metre

Cement concrete in foundations filling & mass concrete , type B1 1:2:4 20 mm graded aggregate

Taking down cement plaster from wall surfaces

M/L for 10mm thk cement plaster with cement mortar (1:6)

Screed bed or bedding layer of CM (1:4) 15 mm thick for laying floor finishes .

Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( double charged )

Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350 X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match

Taking down steel tubing

S/F of PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls of dia 110mm

S/F PVC (SWR) bends any radius of bore 110mm

S&F PVC (SWR) branch piece, single (single Y) equal or unequal of bore 110 mm

S&F PVC (SWR) vent cowl of bore 110 mm

S&F PVC (SWR) 'P’ trap of bore 110 mm

Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe ( 40 mm dia )

Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe ( 25 mm dia )

Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe ( 20 mm dia )

Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe ( 15 mm dia )

Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. ( 40mm dia )

Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. ( 25mm dia )

Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. ( 20mm dia )

S&F vitreous china wash basin ,white,flat back,size 450x300 mm excluding taps, waste chain & plug,including brackets,cutting for & pinning in ends of brackets or erecting stands

Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.

S&F pillar taps,cast copper alloy,with capstan head chromium plated,screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks & fixed (15mm dia) flynuts,screwed for iron pipe

S&F of Swivel shower of PTMT any colour for fixing with 15mm pipe.

S/F PVC connector pipes 15mm size with PTMT nuts of length 450mm

S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia

S & F Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed ( 50 mm )

Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. ( 15mm dia )

Taking down & S&F vitreous china squatting pan, Orissa pattern,size 580x440mm white,with integral foot rests complete including provision of limeal foot rests complete including provision of lime concrete bedding

S&F PVC valveless,syphonic action type flushing cistern,low level,white with inlet,ball valve,float & handle including brackets fixing complete & connections to pipes & fixing of chain & pull or lever,if any(capacity-10ltrs)

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

M&L for washing, rubbing down existing treatment & Priming plastered & other surfaces with alkali resistant priming paint & applying 2 coats of oil emulsion distemper on wall surfaces

M&L for washing, rubbing down existing treatment & Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M/L for 2 coats of synthetic enamel paint after preparation of surfaces over a coat of primer (read lead)

Taking down chowkats or frames with shutters ( without taking off shuters from frame ) exc 1.5sqm but nexc 4 sq m each

S/F steel windows with side hung shutters including projecting type hinges with steel handle,& steel peg stay,complete with glazing bars, dovetailed or welded

S&F sheet glass ordinary quality & glazing of 3mm thk with oil putty in square exc 0.5sqm in each pane

S&F framed work such as grills,gratings,etc,with ends of bars shouldered & or riveted,or forged into spikes.

Cutting holes in brickwork built in cement mortar or cement lime mortar nexc half brick

S&F of nylon netting of 0.91 mm dia fixed with tinned tacks or wire staples. ( Size of mesh :12mm)

M&L for 2nd class hard wood ,plain ,solid,straight chowkats & frames,wrought,framed,rebated on the solid,rounded or chamfered,put together with glue pinned at joints,supplied & fixed

S/F of 25mm thick flush shutters,solid core construction ,with block board core & plywood face panels,commercial type on both side

S&F of butt hinges ,heavy weight,cold rolled mild steel,& fixed (size of hinges - 100mm)

S&F of aluminium handles,cast type ,anodised (150mm size)

S&F aluminium ,anodised barrel tower bolts of extruded sections & fixed(size-150mm)

S/F 100 mm 4 lever mild steel mortice lock

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube,supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick(style) consisting of frame made out of MS tubes for top & bottom rails.MS frames shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheets beading & joined together with solvent cement , supplying & fixing in the frame at site as per specification & drawing, along with all fittings

BOSE & CO. (BID ID -889497)