Repair maint to security fencing, security wall, footpath misc work under GE (S) Tezpur

Amount

Dismantling posts or struts Posts embedded in natural ground (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground.Complete all as specified and as directed

Dismantling fencing wire mesh, any type /chain link fencing any size.Complete all as specified and as directed

Excavating in post holes in soft/loose soil(or similar holes) each n. exc 0.50cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50m and making good all as specified and directed

M&L PCC (1:4:8) Type D-2 using 40mm graded stone aggregate) as in foundation, mass concrete all as specified and directed

M&L PCC (1:3:6) Type C-2 using 40mm graded stone aggregate) as in foundation, mass concrete all as specified and directed

S & F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.Complete all as specified and as directed

S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and staining and fixing to any type of standard rails strain -ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured.).Complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and directed

Supply only chain link fencing any size and type all as specified and directed

S&F 12 mm dia MS bolts purpose made with hexagonal or square head on one end and screwed the other, screwed and fitted with nut and washer, length of bolt exc 10cm and n exc 15cm long all as specified and directed

M&L preparation of new steel surface and applying two coats of synthetic enamel paint over one coat of red oxide primer over 10 cm width or girth all as specified and directed

M&L preparation of old steel surface by scraping of existing paint and applying one coat of synthetic enamel paint over a coat of red oxide over 10 cm width or girth.Complete all as specified and as directed

M&L preparation of old steel surface and applying one coat of synthetic enamel paint over 10 cm width or girth all as specified and directed

S&F mild steel TMT bar 10mm dia and over cut to length bent to shape reqd etc complete all as specified and directed

Mild Steel TMT bars 8mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed

M&L for two coats of synthetic enamel paint over one coat of red oxide on steel surfaces n.exc. 10cm width or girth incl. preparation of new surfaces all as specified and directed

M&L for one coat of synthetic enamel paint over one coat of red oxide on steel surfaces n.exc. 10cm width or girth incl. preparation of old surfaces.

Demolition of brickwork or stone/boulder masonry, built in cement mortar all as specified and directed

M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strength not less than 75 kg/Sq cm all as specified and directed.

All as per item No 19 but except bricks all as specified and directed

S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-290 Gde -E complete all as specified and directed

Demolition of cement concrete in ground floor and paving's n exc. 15 cm thickness (below or above the ground level) (Un-reinforced) and removing to a distance not exc 50 meter complete all as specified and directed

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels, benching/haunching of manhole, road side drains including use & waste of formwork complete all as specified and directed.

M&L 100 mm thick, Cement concrete, type D-2, (1:4:8), 40 mm graded aggregate as in sub base even and rough Finishing surfaces of concrete topping even and fair (without using extra cement), and finishing surfaces of concrete in sub-floors, sub-bases, etc. even and rough to receive the topping layer. all as specified and directed

S & F, 110 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B2 using (40 mm graded aggregate) as in hard standing and paving's including finishing surfaces of concrete topping even and fair (without using extra cement) complete all as specifed and as directed.

M&L for chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick with grey cement and pigment, top surface treated with antifungal paint set and jointed and pointed in neat cement slurry with pigment in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M&L 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

S & F louvers /Precast RCC Jalli, 35mm thick (measured solid) including all moulding in PCC 1:2:4 type B0 (using 12.5 graded aggregate) set in cement mortar 1:4 complete all as specified and directed

M&L for providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in coping water through and like including weathering, slightly rounded or hammered angles and throating as directed including formwork complete all as specified and directed

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with waterall as specified and directed

M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and fair without using extra cement all as specified and directed

M&L for Newly plastered surfaces of external wall with applying 1 mm thick layer of wall care putty to get smooth surface and applying two coats of apex /weather coat paints over a coat of damp shield primer by smart painting method.complete all as specified and directed

M&L for preparing of old wall surface including properly preparation/removal of existing paint surface and fillings the cracks with exterior wall care putty and applying one coat of weather coat water proofing paints by smart painting method.complete all as specified and directed

M&L for preparation of new undecorated surface of wall and applying three coats of white wash on wall all as specified and directed

M&L one coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surface of wall by brooming down all as specified and directed

Demolition of reinforcement cement concrete in roofs, floors(other than ground floor),beams, staircases, landing, chajjas, slabs and similar suspended work complete all as specified and directed.

M&L pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L for RCC type B1 1:2:4 (20 mm graded agg) as slab supported on wall , beams columns in floor, roofs landing and the like all as specified and directed

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Dismantling floor, hearth or wall tilling including cement mortar bedding/complete and removing rubbish off the premises complete all as specified and directed

M&L for Ceramic Paved tiles of size 400 x 400 x 10 to 12 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C2 using 20mm graded agg finishing even and smooth without using extra cement as in plinth protections/path and laid fair in alternate bays n including filler joints with scaling compound grade 'A' where required complete all as specified and as directed. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

AVASANA SOLUTIONS PRIVATE LIMITED

M/S UDIPTA KUMAR BORAH

M/S MOHANPASARI

SHANKAR ENTERPRISE

Chinmay Traders