Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.7 LAccepted-AOC KOUSTHUBHAM KARINGANNOOR VELINALLOOR KOLLAM 691516 | KOLLAM | KERALA | 691516 | ₹2.7 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹2.7 L+₹655.92 (0.24%)Rejected-AOC | ₹2.7 L+₹655.92 (0.24%) | L2 | Rejected-AOC Second Lowest |
Tender Value
₹2.7 L
EMD Value
₹6,836
Closing Date
20 Jun 2025, 5:00 pmClosed
Assistant Executive Engineer
Pwd Buildings subdivision Kollam
DEPOSIT-Strengthening of Agricultural Extension 2022-23 Smart Agricultural Office at Pooyappally, Kollam-Strengthening of Agricultural Extension 2022-23 Smart Agricultural Office at Pooyappally, Kollam-General Civil Work
2025_PWD_769309_1
ET-08/AEE/KLM/2025-2026
Open Tender
Civil Works - Buildings
Item Rate
120 days
Kollam
Please refer Tender documents.
9 documents required · 9 mandatory
₹605
Yes
₹6,836
Yes
23 Jul 2025
13 Jun 2025
23 Jun 2025
13 Jun 2025
20 Jun 2025
13 Jun 2025
Amount
Appendix A
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
OD216397/2022-2023:providing and fixing in required crystal compact solid 4 mm thick Poly carbonate sheet in required colour & shade including aluminium U groove channel section of standered size and weather resistant neoprene EPDM rubber gasket to make the fabricated structure water proof . The U groove channel section shall be rigidly to supporting frame work along with sheet with self taping self drilling steel screws fixed approx 150 mm center to center . the open end edges of polycarbonate sheet shall be provided with aluminium channel of size 10x10x1.5 mm and weight not less than 0.2 kg/m with necessary self tapping screws . the joints of the structure shall be properly sealed with silicon sealent wherever required so as to make the fabricated structure totally water proof . the rate shall include the cost all material such as aluminium section set and channel EPDM gasket , self tapping screws,nuts and bolts and silicon sealent and the materials required to cut , fabricatd and fix the structure complete as per direction of engineer in charge ( cost of supporting steel tubular structure frame work provided shall be paid for separately). Finishing sheet area shall be measured for the purpose of payment
OD216194/2022-2023:Gardening shade UV sheet including necessary fixtures, labour, conveyance etc. complete.
OD193580/2022-2023:Supply and Installation of Fabric Roller blind (NL-04 ZEBRA)including material,accessories,conveyance,labour etc.complete
OD194086/2022-2023:Providing and fixing Magazine stand including materials, labour, conveyance etc., complete.
OD199893/2022-2023:Providing and fixing Notice Board with HDWR board,18mm thick wooden grains , overall size 1500 X 1200 X 150 mm with float glass panes of 5.50 mm thickness, EPDM rubber / neoprene gasket and red velvet cloth and thermocol board and 11mm thick wool lamination to back panel etc. complete as per the directions of Engineer - in -Charge.
OD194918/2022-2023:Construction of Pantry using chequered steel plate as frame for providing white fire clay kitchen sink etc. as per the instruction of Engineer in site.
50.18.7.3.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge 25 mm dia 12 Kgf/cm2 - Internal work - Exposed on wall
50.18.9.16.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall
50.18.9.21.7:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl
18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
17.28.2.2:Flexible pipe40 mm dia
mohanan v (BID ID -2228471)
Bidder Name
mohanan v
MURALEEDHARAN V
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1254796.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .