Replacement of Non clog Submersible Pump motor set at inlet chember at Indraprastha under GAP Phase I with allied electromechanical works under MEDB, PHE Dte. in Murshidabad.

Engagement of labour, majdoor , mathor , sand bag as required number for blockedge of inlet feed water channel for a specific duration without hampering drianedge system as per direction of EIC. Dismantling part by part then Withdrawing of existing Non functioning pump motor set from Under cut of pump house by proper lifting arrangment after disconnecting all pipe line & power connection, earthing connection ETC as per direction of EIC

Supply, Delivery and storage at site of Submersible Sewage Application Pump motor set all accessories. T (For pumping chember Sewage water from Reservior to pumping main) Flow: 52.5 lps Head:13M Motor rating : 11kW Delivery Dia. 150mm Free Passage size. 76mm PUMP MOC: Casing: IS 210 GR. FG260 Impeller: IS 210 GR. FG260 Shaft: Chrome steel A276 TYPE 410 H-Q-P Curve of pumps in test has to be submitted during the delivery As per scope of work of NIET PHED approved Make

Supply Delivery of S/D Starter for above supplied 11 KW motor Model ML 2/ relay range 20-30 A make PHE approved.

Supply Delivery of 150 mm dia CIDF single door Non return valve PN1.0 As per IS 15312 at delivery side of valve. PHED approved Make

Supply Delivery of 150mm dia flexible rubber hose wired breaded pipe with both end Flanged

Sypply of E.R.W.M.S.(Electrical Resistant Welded M.S.) black pipe of of (heavy quality) as per standard specification, 5 mm thick

Supply delivery of 1.1 KV 6 sqmm 3 core copper round flexible cable

Installation of the above supplied Pump Motor set, pump-motor frame, MS pipe, Rubber hose pipe ,valves etc as required and construction of pipe supports, valve supports, etc. including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding Fabrication, Supply, Delivery and Storage at site of suitable size Enlarger made of MS Black Pipe conforming to IS (For , Delivery & Delivery Header) along with necessary fittings viz. flanges, bolts, nuts, gaskets , etc. as reqd. to make the installation complete in all respect etc. as required to complete installation upto entire satisfaction of EIC.

M.S. Jail type made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. (Should be install at inlet chember for screening of Plastic, bag, jute others floating items)

Add GST @ 18%