Renovation of godown, office building and construction of road and compound wall at KVIC Kuttur in Thrissur District.

Amount

Appendix A- Godown Maintenance

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface after cleaning the surface with emery paper.: Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work after cleaning the surface with emery paper.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed : All Kinds of soil

Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Supplying and fixing welded mesh 25 x 25mm square 14 guage including cost and conveyance of all materials required and all labour charges etc. complete.

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) including cost and conveyance of all materials, labour charges for scaffolding and curing etc complete.

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Removing rolling shutter including all fittings etc complete and stacking within 50 meters lead as directed by Engineer in charge

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with gear type system operation etc complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters 0.80x1.25 mm M.S. laths with 1.25 mm thick top cover including gear system , cost and conveyance of all materials, labour charges etc complete as per the direction of Engineer in charge.

Providing and fixing ball bearing for rolling shutters.

Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of : Asbestos Sheet

Providing and fixing Galvalume sheets ( Supply of pre painted Alu- Zinc alloy coated steel sheets ( 55% Aluminium, 43% Zinc, 1.6% Silicons) 0.5mm thick). Sheet should have protective guard film of 25 micrones minimum to avoid scartches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in charge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces,including providing necessary overlap not less than 200mm at end 1 1/2 corrugation at side excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per direction of engineer in charge.

Providing ridges or hips width 60cm overall width plain Galvalume sheet 0.50mm thick fixed with polymer coat , including hooks, bolts and nuts 8 mm dia G.I limpet and bitumen washers complete <br>0.5mm thick , coating not less than 275 gm/m2excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per direction of engineer in charge.

Providing bitumen compound covering to G.I. bolts over roof using 0.45 Kg of bitumen compound per 10m2 area including cost and conveyance of all materials required etc. complete

Providing and fixing 160mm PVC half split eave gutter including cost of all necessary fittings (down pipe to be paid separately) and conveyance of all materials and labour charges

Providing and fixing 75mm PVC down pipe including all cost and conveyance of all materials and labour charges<br>

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Servicing the rolling shutters after removing the shutter cover and greasing with good quality grease and making good push and pull operation including all charges for scaffolding cost and conveyance of all materials required etc. complete

Supplying,Repairing and fixing steel glazed windows and ventilators of varying size outside with z section for outer frame and shutter frame conforming to IS 1038, 4mm thick plain glass fixed with 12.5 x 12.5 x 1mm Aluminium L angle bolted with 5mm G.I. bolts and applying one coat metal primer including cost and conveyance of all materials required and all labour charges etc. complete.

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square meter on wall/floor/roof after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil whereever required.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Mild steel and Medium Tensile steel bars

Providing and fixing shalitex expansion joints fillers of 12mm thick for the top of floor concrete in between panel and sealing grooves on top 12 x 15mm with shalitex sealing compound including charges for cutting the sheet ,levelling the base concrete in cement mortar for the portion of joint, thread lining, extraform work etc. including cost and conveyance of all materials required etc complete

9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including cost and conveyance of all materials, labour charges for scaffolding and curing etc complete.

Providing a layer of floating coat of neat cement of mix over the existing plastered area as required (Above the floor concrete mix of 1:2:4 ratio, 75mm thick and simultaneous plaster of 9mm thick, which is to be paid seperately)including cost and conveyance of all materials, labour charges for scaffolding and curing etc complete.

Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

Supplying and fixing PVC door of size 0.75 x 2.10 M using door frame 50 x 47 x 5mm reinforced with 19 x19 mm x 19 gauge. M .S square tube, 30 mm thick solid PVC door reinforced with 19 x 19 x 19 gauge MS square tube for the shutter in single leaf including 18 Nos 50mm screws fixed in walls including all door fittings cost and conveyance of all materials required etc. complete as per instruction. during execution.

Appendix B - Other Works

Engaging coolies for dismantling, clearing debris, repair and clearing the area as per the direction Engineer in charge.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work after cleaning the surface with sand paper.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new workafter cleaning the surface with emery paper.

Supplying and fixing for the double leaf shutter 4mm thick plain glass including cost and conveyance of all materials required and all labour charges etc. complete.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar taps

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to bespecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mmthick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Supplying and fixing PVC door of size 0.8 x 2.10 m including cost and conveyance of all materials required , fixing in postion etc. complete as per instruction. From Engineer in charge during execution.

Providing and fixing Galvalume shets ( Supply of pre painted Alu- Zinc alloy coated steel sheets ( 55%Aluminium, 43% Zinc, 1.6% Silicons) 0.5mm thick). Sheet should have protective guard film of 25micrones minimum to avoid scartches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in charge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, including providing necessary overlap not less than 200mm at end 1 1/2 corrugation at side excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per direction of engineer in charge.

Providing ridges or hips width 60cm overall width plain Asbestos sheet fixed with polymer coat , including hooks, bolts and nuts 8 mm dia G.I limpet and bitumen washers complete <br> 0.5mm thick , coating not less than 275 gm/m2 and demolishing existing ridges or hipsexcluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per direction of engineer in charge.

Providing bitumen compound covering to G.I. bolts over roof using 0.45 Kg of bitumen compound per10m2 area including cost and conveyance of all materials required etc. complete

Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Demolishing cement concrete manually / by mechanical means including disposal of material within 50metres lead as per direction of Engineer - in-Charge. Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Engaging carpenters for repairing existing wooden works

Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows,30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood

Chipping cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.<br>Nominal concrete 1:4:8 leaner mix

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Providing and fixing name board on MS sheet using appropriate steel tubular pipes and painting one coat the sheet including the cost of priming coat all completely. The name board should have proper lettering and details regarding the project.

Appendix-C-Office room renovation

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work after cleaning the surface with emery paper including cost and conveyance of all materials including scffolding charges etc.complete.

Dismantling White vitreous china water closet squatting pan (European type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P"trap at site complete and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and for cement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams,girders bressumers and cantilevers

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1cement :6 coarse sand) etc complete

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) including cost and conveyance of all materials, labour charge etc complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer including cost and conveyance of all materials including scaffolding charges etc.complete

Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet

Providing and fixing Galvalume shets ( Supply of pre painted Alu- Zinc alloy coated steel sheets ( 55%Aluminium, 43% Zinc, 1.6% Silicons) 0.5mm thick). Sheet should have protective guard film of 25micrones minimum to avoid scartches during transportation and should be supplied in single length upto12 metre or as desired by Engineer in charge.The sheet shall be fixed using self drilling/self tappingscrews of size (5.5 x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, including providing necessary overlap not less than 200mm at end 1 1/2 corrugation at side excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per direction of engineer in charge.

Providing bitumen compound covering to G.I. bolts over roof using 0.45 Kg of bitumen compound per10m2 area including cost and conveyance of all materials required etc. complete

Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mmthick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Supplying and fixing PVC door of size 0.75 x 2.10 M using door frame 50 x 47 x 5mm reinforced with 19 x19 mm x 19 gauge. M .S square tube, 30 mm thick solid PVC door reinforced with 19 x 19 x 19 gauge MS square tube for the shutter in single leaf including 18 Nos 50mm screws fixed in walls including all doorfittings cost and conveyance of all materials required etc. complete as per instruction. during execution.

Supply and fixing precast ventilator of size 600x400 mm with shutters including cost and conveyance of all amterials etc.complete etc

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Appendix-D-Compound wall

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand)

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) including cost and conveyance of all materials, labour charge etc complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface after cleaning the surface with emery paper.: Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts 2.5m c/c with 4 layers fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used.With G.I. barbed wire

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.

Appendix-E-Road work

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area

Supplying and laying interlocking tile 100 mm or nearest size thickness, minimum strength M 40 including providing a layer of 6 mm aggregate minimum 10cm to 15cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site including ramming with vibrator and spreading M Sand in between tiles, including cost and conveyance of all materials required etc.complete.

Road & Yard

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

SAJI KURUVILA

jmj constructions