Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.0 LAccepted-AOC MANDIR ROAD NEW ABADI AKALGARH AIR FORCE STATION HALWARA TEH RAIKOT DISTT LUDHIANA PB 141106 | LUDHIANA | LUDHIANA | PUNJAB | 141106 | L1 | Accepted-AOC Due to lowest accepted | |
| 2 | L2₹8.1 L+₹10,273 (1.28%)Rejected-Finance VPO BURJ HARI SINGH TEH RAIKOT DISTT LUDHIANA PIN 141109 PB | RAIKOT | LUDHIANA | PUNJAB | 141109 | L2 | Rejected-Finance Other than lowest |
Tender Value
₹8.3 Cr
EMD Value
₹16,642
Closing Date
23 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Ludhiana
Garrison Engineer Military Engineer Services Near Jagraon Bridge CG Complex Ludhiana-141001
PROVN OF OFFICE FOR PERSONAL OFFR ALONGWITH TOILET AT HQ COMPLEX OF FAD BADDOWAL UNDER GE LUDHIANA
2022_MES_565497_1
GE/LDH-60/2022-23
Open Tender
Civil Works
Item Rate
180 days
Baddowal
As per NIT and Documents
9 documents required · 9 mandatory
₹500
GE Ludhiana
₹16,642
Yes
2 Feb 2023
26 Nov 2022
24 Dec 2022
26 Nov 2022
23 Dec 2022
10 Dec 2022
26 Nov 2022 - 9 Dec 2022
Amount
Sch 'A' sec-I
Surface excavation n exc 30cm deep and averaging 12.5cm deep and getting out in soft/ loose soil.
Excavation in trencehes n exc 1.5 Mtr wide & N exc 1.5 Mtr deep and getting out in soft/loose soil.
M&L for PCC (1:4:8) type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified.
M&L for brickwork with subclass 'B' bricks, straight or cirved on plan exc 6 mtr mean radius, built in cement mortar 1:6 complete all as specified.
Use and waste of formwork to soffits and sides of beam and lintels for rough finished surfaces of concrete flat complete all as specified.
M&L for RCC(Nominal Mix, (1:2:4) using 20 mm graaded stone aggregate) as in lintels, Beams, cantilevers, bressumers over 1.5 m span complete all as specified.
Use and waste of formwork to edges of concrete flats as in roof slabs exc 10 but n exc 20 cm wide suspended slabs n exc 200mm thick for rough finished surfaces of concrete flat complete all as specified.
Use and waste of formwork to soffits of suspended slabs n exc 200mm thick for rough finished surfaces of concrete flat complete all as specified.
M&L for RCC (Nominal Mix, 1:2:4, (20mm graded aggregates)) as in slabs supported on walls complete all as specified.
Use and waste of formwork for rough finished surface to chullah hoods chajjas,troughs and similar items including edges complete all as specified.
M&L for RCC (Nominal Mix, 1:2:4, (20mm graded aggregates)) as in chajjas complete all as specified.
M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified.
M&L for TMT bars 5mm and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips as in stirrups, spaces and binders complete all as specified.
M&L for rendering 15mm thick on fair faces of brick or concrete surface in cement mortar 1:6 complete all as specified.
M&L for rendering 15mm thick on fair faces of brick or concrete surface in cement mortar 1:4 mixed with integral water proofing compound complete all as specified.
M&L for 10mm thick rendering/ screed on terrace or concrete surfaces in cement mortar 1:4 finished even and fair. ( using water proofing compound) over slab complete all as specified.
M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces complete all as specified.
M&L for priming surfaces and applying normal treatment (for moderate conditions) using bitumen primer @ .30 Kg/Sqm applied hot complete all as specified.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified.
M&L for 40mm thick brick tiles laid on Screed bed of cement mortar (1:4) 20mm thick finished even and fair and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified.
M&L for rendering 5mm thick on fair faces of brick or concrete surface in cement mortar 1:3 as in ceiling complete all as specified.
Supply only integral water proofing compound
S&F for Pressed steel frames of size 125X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed
M&L for PCC type C1 of 1:3:6 of coarse aggregate of size 20mm in door frames
M&L for Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated of second class HW rail and style and thicknes of shutter 35mm.
M&L for Glazed and skeleton shutters of 35 mm of 1st class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats.
M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing
S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottomrails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welde/ sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.
S&F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples
S&F for 3mm thick figured glass, pin headed type and glazing with oil putty in squares n exc 0.5 Sqm in each pane
S&F for 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type B-21.
S&F for extruded aluminium alloy handles fabricated type, anodised 125mm long.
S&F for aluminium anodised, barrel tower bolts of extruded section 150mm long.
S&F for mild steel sliding door bolts of 250mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.
M&L for 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub floor.
M&L for non skid ceramic joint less coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm laid in floors and in skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as directed.
M&L for hardcore of broken stone boulders of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified.
M&L for 50mm thick PCC 1:3:6 Type C-2 using 40mm crushed stone aggregate as in plinth protection and like finished even and smooth without using extra cement complete all as specified.
M&L for preparation of new plastered ceiling surfaces and applying three coats of whitewash complete all as specified
M&L for prepration of newly plastered or pointed surface of walls and applying two coat of cement base paint complete all as specified & directed by Engineer-in- charge.
M&L for two coats of oil bound distemper of any colour on new surface including preparation as directed by Engineer in charge.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.
S&F for wash down water closet (Pedestal pattern), complete white (including fixing bolts, flushing cistern, seat cover and flush pipe)
S&F for vitreous china wash basin with vitreous white, flat back, size 550 x 400mm, including cutting for and pinning in ends of brackets or erecting stand but including supply and fixing of waste cupling waste pipe 32mm bore and PVC bend.
S&F for toilet paper holder ( white) , vitreous China, box type fixed to walls with chromium plated (CP) brass screws.
S&F for soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws.
S&F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.
S&F for harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. but of anodised aluminium alloy
S&F for pillar taps cast copper alloy, with capstan heads chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts screwed for iron pipe and fixed.
S&F for PVC connections 15mm size with PTMT nuts of lentyh 450mm.
S&F for bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S&F for rotational moulded polythylene water strarge tanks 500 ltr (Cylinderical vertical with closed top cover) hoisted and fiexed in position all as per specified in SSR Pt-1.
S&F for 20mm bore tubes medium grade galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors.
S&F for 15mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors.
S&F for 15mm bore stop valves, fancy type with chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F for 15mm bore stop valves, fancy type, chromium plated with long shank and cup (concealed type)cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F for gun-metal, globe or gate valves of bore dia 15 mm, with iron wheel head, screwed both ends for iron pipe and fixed.
S&F for gun-metal, globe or gate valves of bore dia 20 mm, with iron wheel head, screwed both ends for iron pipe and fixed
S&F for 20mm bore brass ball valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed
S&F for 110 mmPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.
S&F for 75 mmPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
S&F for 75mm bore PVC PVC (SWR) bend of any radius.
S&F for 75mm bore PVC PVC (SWR) junction single, (Single T) equal or unequal.
S&F for 75mm bore PVC cowls.
S&F for PVC P-Traps for water closets of 110mm bore.
S&F for 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement
Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25 CM thick in soil complete all as specified.
Removal of surplus spoil to a distance exc 50 Mtr and n exc 100 Mtr and depositing where directed at a level n exc 1.5 Mtr above starting point in soil complete all as specified.
Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.
M&L for formwork for rough finished surface to sides of pillars, posts, struts, piers, columns and stanchions for finished surfaces complete all as specified.
M&L for RCC (Nominal Mix, type B-1 (1:2:4) (20mm graded aggregates)) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.
M&L for Box type steel window/ventilator made of ERW tube P-section of size 60 mm x 25 mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sach bar of T-section 20x3 mm welded to frame with one or no vertical mullion of ERW box type T Section of size 60mm x 25mm and F1 2mm thick welded/screwed to frame for fixing of glass including fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf.
As per item no 76 but for wire mesh shutter. ( Wire mesh shall be measured and paid separatly).
M&L for RCC (Nominal Mix, type B-1 (1:2:4)(20mm graded aggregates)) as in Columns, pillars, piers, posts and struts.
M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm / 450x350x7mm thick, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
M&L for virified Ceramic tiles 10 mm thick of light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste complete all as specified and as directed. .
M&L for vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4.
S&F for aluminium (extruded section) body door closer hydrulically regulated, designation No.3 , universal type suitable for door shtters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.
M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
M&L for 3mm thick Sheet glass, ordinary quality and glazing with silicon sealant in square n exc 0.5 sq.m in each pane complete fixed in repair all as specified and directed by Engineer-in-Charge.
S&F for PVC (SWR) 110 mm pipes single socketed in any length with rubber ring joints fixed to walls.
S&F for PVC (SWR) bend 110 mm bore of any radius complete all as specified & directed by engineer-in-charge.
M &L for providing, plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed
M&L for 80 mm thick M-40 Machine pressed interlocking cement pavers blocks coloured any shape and size conforming to IS 15658-2006 over 25 mm thick sand cussioning with grey cement and pigment all as specified and directed.
M&L for 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed as specified complete.
M&L for 12mm thick internal plaster in cm(1:4) with water proofing compound @ 3% by weight of cement of brick or concrete surface finished even a smooth without using extra cement.(WPC shall be measured and paid for seperately)
S&F for Mild steel work as in balusters, steps, rungs, band, handles and similar work small article fixed independent made to shape and duly tarred and sanded complete all as specified. (PCC for filling for MS steps shall be measured and paid seperately)
M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in benching for manhole, bands, coping bed plate etc with slightly chamfered or rounded andgles including necessary form work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified.
Extra for forming fair finish to drain or channel 30cm internal girth in cement concrete using extra cement including forms moulds/mitred stopped ends etc
M&L for preparation of newly plastered surfaces and applying three coats of white wash complete all as specified.
M&L for cutting into existing manhole for connecting new drains not exc150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required complete all as specified & directed by Engineer-in-charge.
M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surface as per adjoining specification and terminated in concealed terminal boxes including MS concealed terminal boxes with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with washers,earth continuity PVC insulated cable copper conductor 1.5sqmm (nominal area)stranded as green colour as earth wire connected with earth dolly complete all as specificed and as directedn by Engr-in-Charge.
One light point controlled by one switch
One Fan point controlled by one switch
One 3/5 pin 5 Amps socket outlet on independent board
One 3 pin 5 Amps socket outlet on same board
All as per item No 107 above but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for 3 pin 15 amps socket outlet on independent board
S&F for switch Piano flush button single pole one way 5 Amps 240 volts complete all as specified.
S&F for switch piano flush button single pole one way 15 amps,230 volts.
S&F for socket outlet 3 pin,5 Amp multipurpose flush type.
S&F for socket outlet 2 in 1,3 pin, 5 & 15 Amp flush type
S&F for ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F for exhaust fan made of PVC body with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.
S&F for ceiling rose surface type bakelite 65x50mm three terminal complete all as specified and directed. .
S & F for batten holder insulated body all as specified and directed.
S & F for Fan regulator electronic type step type all as specified and directed.
S&F for decorative ultra slim linear LED lighting fixture 18/20 watt (4 Ft) with co extruded polycorbonate body, environmental friendly, energy efficient, including tube rod and connection from ceiling rose to connector complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down existing light fittings complete all as specified and directed by Engr - in - Charge.
M& L for sheet metal DB with 200 Amp rated copper tin coated bus bar, double door epoxy coated paint inside and outside 08 way complete with neutral and earth bar, prewired complete all as specified and directed.
M & L for MCB C-Curve SP 6 to 32 Amp,10 KA complete all as specified.
M&L for MCB SPN 32 Amps, 10 KA, C-curve complete all as specified.
S& F for LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supplying, laying, and testing cable XLPE insulated , screened,PVC bedded,galvanized steel strip or wire armoured, electric power cables (heavy duty)1100 volts grade with standed aluminium conductor of size : 16 Sqmm 02 Core.
Supply and fixing for galvanised pipe light grade of ISI marked 40 mm bore for passing of cable fixed to poles/walls/lay under floor complete with and including fittings as required compete all as specified and directed by Engr-in-charge.
M & L for filling dry and clean sand in trenches for cable 8 cm deep below and 15 cm above for cable cushioning complete all as specified . Note:- Punning down thick shall be measured in sand cushioning.
M&L for old size sub class ‘B’ bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed.
M &L for earthing incl earth work complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25 x 3 mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.
M & L for GI pipe "medium grade" ISI marked laid complete including fitting 20mm (3/4") dia laid in trenches. compete all as specified and directed by Engineer-in-Charge. Note : Earth work shall be measured and paid, seperately.
Cutting in position existing pipe line of size 40 to 150 mm dia and insertion of tee of suitable size for tapping out branch connection including other connected fittings and excavation earthwork compete all as specified and directed by Engineer-in-Charge.
Supply & fixing for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly hnadle, screwed both ends for iron pipe or for unions and fixed of size 20 mm ( 3/4") compete all as specified and directed by Engineer-in-Charge.
M&L for pit masonary for valve constructed complete of size 60 x 60 x 60 cm with MS sheet cover with locking arrangement etc suitable for pipe 40mm dia compete all as specified and directed by Engineer-in-Charge.
M/S Satguru enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .