NIT No. 25 Item No. 11 (22-23) EE (T)/ACE

Horizontal 20 H.P. monobloc water pump set of discharge flow rate-2940 LPM to 1260 LPM at 14-to-30-meter head range with C.I. impeller gland packing, sealing C-40 shaft TEFC motor, IP-55 “F”-class insulation Sleeve coupled with 20 HP, 3000 rpm, 3 phase, 415-volts TEFC motor, size of suction & delivery-125x125 mm with MS base frame. Make of Pump set: KBL,Lubi,ABB and any approved make of DJB

Casting of RCC foundation of size 0.5 mtr x 1 mtr. x 0.5 mtrs. with the help of Iron Bars & C:C in the ratio 1:1.5:3. The work i/c fixing /grouting of MS foundation nut bolts of suitable size including welding of foundation bolts with the Iron Bars.

Supply of MS pipe of 125 mm dia. 08 mm thickness. MAKE: Any approved make of DJB

Supply of M.S. flange 125 mm dia. 08 mm thickness

Rubber insertions for 125 mm dia. pipe joints. D J B SOR Code1374

Supply of M.S Nut bolts washer. D.J.B. S.O.R: Item Code1034

Supply& fixing of anti-vibration mounting pads as required.

Supply of 125 mm dia. bends made out from 8 mm thick MS Sheet, dully welded and having flanges with holes on both sides

Supply & fixing of foundation bolts as required.

Supply of PVC insulated Flexible Copper Conductor 35 sq.mm three core cable for above pump set to connect motor to starter. Make: Havells, Polycab, Grandley and any approve make of DJB

Supply of PVC insulated Aluminum armored 50 sq.mm three core cable for main to panel Make: Havells, Polycab, Grandlay and any approve make of DJB

Supply of automatic star-delta starter in SS enclosure, output voltage: - 415 Volts, three phase for 20 H.P. pump set. Make: - L&T, C&S, Havells, BCH and any approved make of DJB

S/o MCCB 415V, three pole 3phase, high breaking capacity 50KA 50Hz, rating-250Amp. Make: L&T/Siemens/Havells/BCH and any approved make of DJB

Providing and fixing 25x5mm G.I. strip on surface or in recess for connections etc. as required.

Supply of 125 mm dia. NRV PN 1.0. Make: - Kirloskar / IVC / DJB Approved make

Supply Non rising Sluice valve of size 125 mm, PN 1.0 Make: - Kirloskar / IVC / DJB Approved make

Packing and transportation charges of the Pump set. This includes shifting of the complete pump set from shop to site and transportation and loading unloading cost done with the help of manual labor.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq. mm and up to 95 sq. mm (clamped with 25x3mm MS flat clamp). For 50 sq.mm

Making the required incoming power supply connections between main supply and new incomer panel by connecting the cable after relaying of cable and re -thimbling of cable ends as per requirement.

Fixing the pump set over the base frame with the help of tools & tackles with the help of heavy labour as per site. MS pipe including fixing of suction & delivery along with valve, NRV with the help of the gas cutter, welding m/c including welding rods and other tools & tackles etc. complete in all respect as per site requirement

Testing and commissioning of pump set as per required parameters with relevant IS testing of the starter prior to switching on as follows. Continuity and earth testing. Meggaring of all equipments for phase to phase, neutral to body, neutral to earth and phase to earth. Checking for all tightness of nut and bolts.

The staff to be deployed of 03 Nos. operator (Semi-skilled) including contractor profit, ESIC & EPF per day for operation for pump set at on line booster DDA Flat Gulabi Bagh

Goodwill Enterprises