Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.2 LAccepted-AOC D NO 58 20 33 FLAT NO F 2 VAIKUNTAPARVATHI RESIDENCY APSEB COLONY BUTCHIRAJUPALEM VISAKHAPATNAM 530 027 | VISAKHAPATANAM | ANDHRA PRADESH | 530027 | L1 | Accepted-AOC Accepted being lowest | |
| 2 | L2₹39.5 L+₹98,684.90 (2.56%)Rejected-AOC D NO 39 8 38 4 1 MURALINAGAR VISAKHAPATNAM 530007 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530007 | L2 | Rejected-AOC Not lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
3 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(Works) 1
GE(Wks)1/DGNP(V) , Naval Base Area, Visakhapatnam, AP
REPAIR/RESURFACING AND ALLIED WORKS OF CERTAIN ROADS UNDER DGNP(V)
2022_MES_543199_2
GE(Wks)1/Token/04 of 2022-23
Open Tender
Civil Works - Roads
Item Rate
180 days
DGNP Vizag
As per tender documents
6 documents required · 6 mandatory
₹500
Yes
DGNP VISAKHAPATNAM
₹98,000
Yes
8 Dec 2022
13 Sept 2022
5 Oct 2022
13 Sept 2022
3 Oct 2022
20 Sept 2022
13 Sept 2022 - 20 Sept 2022
Amount
Material & labour for repairs to pot holes any depth not exceeding 1sqm each including sweeping free from dust and mud, or water , scoring sunken surfaces in roads, paths etc. Cutting around edges to at least 25 mm in depth making good by applying tack coat with bituminous primer using paving bitumen VG 30 @ 5Kg Per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder (using paving bitumen VG 30) 9.8 kg per 10 sqm, blinded with 0.09 Cum of stone chipping, 6.3mm size and again well rammed (including supply of pre mixed macadam, binder and chipping) depth of pot holes exceeding 30mm rolled and compacted using power roller 8 to 12 tonne capacity all as specified and directed.
Preparing of metal top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.
Material & labour for applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-30 at 5Kg Per 10 sqm complete all as specified and directed.
Material & labour for premixed bituminous semi-dense asphaltic concrete 30mm average consolidated thickness laid with using mechanical paver for any width of road with maximum 5.5% binder content using VG-30 by weight of total mix, rolled and compacted to require camber and gradient using 8 to 12 tonne power roller complete all as specified and directed. Note: 5.5% binder content shall be for pricing purpose only. Any deviation in minus side shall be adjusted @Rs. 50.00 per KG of bitumen and no price adjustment shall be made for plus side variation.
S&F in repairs Cat Eye road reflectors studs of self illuminating flashing type having directional road reflectors studs shall be water proof IP 65 as per IS 12063-1987 category 2 size of Cat Eye road reflectors studs 100X100X20mm with complete all as specified and directed.
Material & labour for hot applied thermo setting road marking paint 2mm thick in shapes/signs as require exceeding 10cm to 50cm width (including Zebra crossing & speed breaker marking) white or golden yellow in colour including preparation of existing surfaces and glass beads retro reflective type as per ASTM standards all as specified and directed.
S&F in repairs Solar road stud road lighting type having directional road reflectors studs shall be water proof , rechargeable Nickel cadmium battery to be charged through solar cell , main frame cast aluminium with poly carbonate cover over solar cell and reflective poly carbonate cover & fixed with epoxy of road with complete . ( Colour Green / Red).
Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for precast cement concrete block masonry with solid blocks type C-1, 1:3:6 (20mm graded crushed granite stone aggregate) exc 10cm in width and set in cement mortar 1:6, complete all as specified and directed.
M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 and finished the surface even and smooth without using extra cement complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for hardcore of stone boulder of gauge n exc 63mm, deposited, spread and leveled in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
M & L for 100 mm thick cement concrete 1:4:8, type D-2 (40 mm graded crushed granite stone aggregate) in sub base complete all as specified and directed.
M&L for 20mm thick screed bed or bedding layer in CM 1:4 for laying tile etc complete all as specified and directed.
M&L for coloured chequered cement concrete tiles 20cmx20cmx25mm thick ,set, jointed and pointed in neat cement slurry in floor with using grey cement and no pigments complete all as specified and directed.
M&L for sand filling for cushion bed below interlocking paver blocks complete all as specified and directed.
M&L for machine pressed precast concrete interlocking coloured paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, jointed with grey cement and no pigment complete all as specified and directed.
M&L for providing cement concrete type C-1 1:3:6 (20mm graded crushed granite stone aggregate) in copings and bed plates, etc., water troughs and the like including weathering, slightly rounded or chamfered angles and throating with and including use of formwork, complete all as specified and directed.
M&L in repairs Plastic speed breaker made of special plastic compound ( and not ABS) which can take maximum load and impact . One meter should comprise of 2 yellow and 2 black blocks. The size of each block should be 350 x250x 50 mm and the weight of each block shall be not less than 950 Gms ( Without concrete filling) . The colours should be UV stabilized and not require re-painting . Each block of plastic nos 16 (GII-PSB50) speed bump should have 10 micro - prismatic reflectors on either side of it for easy night time visibility . The speed bump should be filled with concrete mix and then fixed to the ground surface with epoxy and nails. Speed Bump should have been tested for compression load for compression Load for at least 15 tons from NABL accredited Lab complete all as specified and as directed.
S&F in repairs 600 mm dia road side Convex Mirror with polycarbonate fixed to 40 mm bore MS pipe with clamps complete all as specified and directed.
S&F in repairs Road side solar delinator of 80mm dia reflective type 4 nos super bright LED flash light , upper height is 145 mm fixed on 40 mm dia & 800 mm long prepainted MS pipe , grouted 200 mm in ground & 600 mm on above GL complete all as specified.
Sai Lakshmi Constructions
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .