SHETRUNJI IRRIGATION SCHME- ENGINEERING, PROCUREMENT AND CONSTRUCTION (EPC) CONTRACT FOR SUPPLYING 5 LAKH L.P.D OF WATER FROM SHETRUNJI DAM INCLUDING CONSTRUCTION OF INTAKE WELL & LAYING OF PIPELINE WITH OPERATION AND MAINTENANCE OF THE COMMISSIONED PROJECT FOR 10 YEARS AT VILLAGE JIVAPAR TALUKA, PALITANA DISTRICT BHAVANAGAR

• BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Item Description of Item (with brief Quantity Unit Rate In Amount

No specification and reference to figures

book of specifications)

Providing and constructing

cofferdam in river basin including

excavation ,filling, middle portion

with soil (in empty

Cement/Gunny bags) to the

entire satisfaction of EIC till

completion of the work including

dismantling coffer dam after

completion of the work as

directed by EIC.

Excavation in all sort of strata and

formations incl. depositing the

unuseful excavated stuff as and

where directed incl. sorting and

stacking useful materials in

measurable conditions as

directed upto 200mt lead and all

lift etc. complete incl.

dewatering. (A) IN OVERBURDEN

INCL. HARD MURRUM.

Dewatering for earthen dam and

allied works, foundation areas,

pits, trenches etc incl cost of

3 pumping machineries, pipe lines, 1000.00 HP/Hr 27.00

labours diesel/electricity/DG set,

Providing & Laying in position

controlled cement concrete using

cement sand & crushed metal

aggregate by machine mix incl.

necessary formworks,

compaction by mechanical

4 vibrator curing as directed with 27 Cum 4369.0000

all lead and lift etc complete.

Excluding the cost of steel.

training wall, side wall and

general purpose. A) Concrete

grade M-15 and MSA-

Providing and laying in position

Ready Mixed M-300 grade

concrete for reinforced cement

conctere work , using cement

content as per approved Design

Mix manufactured in fully

automatic batching plant and

transported to site of work in

transit mixer for a lead up to

kms having continuous agitated

mixer, manufactured as per mix

design of specified grade for

reinforced cement concrete work

including pumping of R.M.C. from

transit mixer to site of laying,

excluding the cost of centering

shuttering finishing and

reinforcement including cost of

admixtures in recommended

proportions as per IS: 9103 to

accelerate/ retard setting of

concrete, improve workability

without impairing strength and

durability as per direction of the

Engineer - in - charge. Without

Fly Ash (Min cement level as per

latest IS 456 shall be maintained)

(Cement level 475 kg )

RCC M:30 Quantity

Total M30 Concrete required 381.84 Cum 5292.93

M15 Concrete 14.13 Cum 3989.16

Providing and laying in position

Ready Mixed M-250 grade

concrete for reinforced cement

conctere work , using cement

content as per approved Design

Mix manufactured in fully

automatic batching plant and

transported to site of work in

transit mixer for a lead up to

kms having continuous agitated

mixer, manufactured as per mix

design of specified grade for

reinforced cement concrete work

including pumping of R.M.C. from

transit mixer to site of laying,

excluding the cost of centering

shuttering finishing and

reinforcement including cost of

admixtures in recommended

proportions as per IS: 9103 to

accelerate/ retard setting of

concrete, improve workability

without impairing strength and

durability as per direction of the

Engineer - in - charge. Without

Fly Ash (Min cement level as per

latest IS 456 shall be maintained)

(Cement level 450 kg )

Providing, cutting, bending,

binding and fixing in position as

per drawing .TMT BAR

7 reinforcement for R.C.C. works

and anchor bars incl cost of black

annealed 16 to 18 BWG M.S.. Wire

etc. complete with all lead and lift.

FROM BBS 46.69 MT 76574

Back filling with selected earth

brought from out side borrow

area ,or from excavated useful

8 material including watering 3618.13 Cum 141

ramming, consolidation with

pneumatic temping and all lead

and lift etc complete.

Providing and fixing rolling

shutters of approved make made

of 80mm wide MS Laths inter

locked together through their

entire length and jointed together

at the ends by end likes mounted

on specially designed pipe shaft

with bracket plates, guide

channels and arrangements for

inside and outside locking with

push pull operation complete

including the cost of hood cover

and spring etc. complete(Width

Rolling Shutter 5.00 Sqm 3554.40

Providing and fixing window

having extruded aluminum

Colour anodized section frame

main outer size 63.50 x38.10 x

horizontal twotrack member size

@wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm

0.659 Kg/mt with slidingshutters

of horizontal member size 40mm

0.456Kg/mt, vertical member of

size40mm x 18mm x 1.29mm @

Kg/mt with 5 mm thick

transparent bronze colour tinted

float glass with powder coated

aluminum fitting sand fixtures and

transparent silicon sealant glass

fixing to frame as per details etc

complete for window.

Total window Fully Paneled Qty

Providing and laying brick

masonry using std. modular brunt

bricks (2nd class) and cement

11 mortar by mass incl striking out 11.91 Cum 5507

joints, curing, finishing and

scaffolding etc. complete. a) IN

C.M. 1:5 For all lead and lift.

Cement plaster 20mm thick in

single coat to stone masonry in

12 C.M. 1:3 incl finishing, curing, 590.70 Sqm 261

scaffolding etc complete. a) UPTO

Cement plaster 15mm thick in

single coat to brick masonry in

13 C.M. 1:3 incl finishing, curing,

scaffolding etc. complete a)

UPTO 6.0 Mt HEIGHT

Total Inside Plaster Quantity 135.70 Sqm 216

Providing & laying cement

concrete flooring 1:2:4 (1cement :

2 coarse sand : 4 graded stone

14 aggregate 20 mm nominal size) 37.37 Sqm 347.14

laid in one layer finished with a

floating coat of neat cement.

Providing and laying polished

kota stone slab 25 mm thick in

risers of steps, dado and pillars

laid on 10 mm thick cement

mortar 1 : 3 (1 cement : 3 course

sand) and jointed with gray

cement slurry including rubbing

and polishing etc. complete

Total Quntity of Kota stone

White washing with lime on wall

surface (two coats) to give an

even shade including thoroughly

booming the surface to remove all

dirt, dust; mortar drops and other

foreign matter.

Finishing wall with water proofing

cement paint of on wall surfaces

(Two coats) to give an approved

brand and manufacture and of

required shape even shade after

thoroughly brushing the surface

to remove all dirt and remains of

loose powered materials.

Providing and fixing G.I. Pipe

railing ( B-class medium duty ) as

per design of 1.0 mt height, using

75x75x10 mm size M.S Angle at

18 2.0 mt c/c for vertical posts and

mm dia G.I. Pipe for 4 horizontal

rows incl one coat of red oxide

primer & two coats of oil paint etc

Total MS pipe Railing Quantity 16.00 Rmt 1942

19 Heavy Duty Exhaust Fan 2.00 No 5000.00

Providing and fixing in position

Cast Iron Manhole Covers and

frame conforming to IS 1726. All

exposed edges rounded end

finished in cement mortar etc.

Providing formwork of ordinary

timber planking so as to give a

rough finish including centering

shuttering strutting and propping

etc. height of propping and

centering below supporting floor

to ceiling not exceeding 4 M. and

removal of the same for in situ

reinforced concrete and plain

concrete work in. (G) Columns

Pillars Posts and struts.

(2)Circular or curved in Plan.

Providing and fixing metal

expansion joints as per drawings.

Details of expansion joint 50 x

22 x 6mm size two IS and 100 x 6mm 5.00 Rmt 2013.95

MS plate with 6 x 20 x 25mm long

hold fast @ 50 cm / cc on both

sides of expansion joints.

Providing formwork of ordinary

timber planking so as to give a

rough finish including centering

shuttering strutting and propping

etc. height of propping and

centering below supporting floor

to ceiling not exceeding 4 M. and

removal of the same for in situ

reinforced concrete and plain

concrete work in (G) Columns

Pillars Posts and struts.

(2)Circular or curved in Plan.

Providing and laying dry rubble

stone pucca pitching without

base , inverted filter and header

24 stone but with 10cms thick 660.37 sqmt 349

murrum layer ( for base ) incl.

hand packing and trimming&

dressing slopes etc complete.

SUBMERSIBLE PUMP:-

Providing submerged centrifugal

pump sets (water immersed, dry

air filled, class "F" insulated

TEWC motor integrally mounted

on volute casing pump sets for

water duty, 3-phase, 50 ± 3% Hz,

415 ± 10% V along with suitable

25 foundation / installation device 2 No. 32582

with cable length from pumps to

panels & of following Material of

Impeller: CF8M, Casing: C.I. FG

260, Wearing Ring: SS, TC

mechanical seal, CS/SS bearing,

SS shaft with sleeve, SS strainer &

MS motor body. a)Upto 30 KW

Providing and supplying lSI mark

Cl D/F Sluice Valves as per IS:

14846 (Latest Edition) of following

class and diameter including all

taxes, insurance, transportation,

freight charges, octroi, inspection

charges, loading, unloading,

conveyance to departmental

stores. stacking etc. complete.

PN-1 With hand w heel/cap

operated {PO type short body).

Lowering, laying and jointing in

position following C. I. I D/F

Reflux valves, Butterfly valves,

Sluice valves and Air valves

27 including cost of all labour, 2 No. 585

jointing material, including nut

bolts and giving satisfactory

hydraulic testing, etc. complete.

Providing and supplying lSI mark

Cl D/F Reflux Valves as per

15:531 2 (Latest Edition) of

following class and diameter

including all taxes, insurance,

transportation, freight charges,

octroi, inspection charges,

loading, unloading, conveyance

to departmental stores, stacking

etc. complete. 150 mm

Lowering, laying and jointing in

position following C. I. I D/F

Reflux valves, Butterfly valves,

Sluice valves and Air valves

29 including cost of all labour, 2 No. 585

jointing material, including nut

bolts and giving satisfactory

hydraulic testing, etc. complete.

Providing and supplying lSI mark

Cl 0/F Butterfly Valves as per

15:13095 (Latest Edition) of

following c lass and · diameter

including all taxes, insurance,

30 transportation, freight charges, 1 No 4089

octroi, inspection charges,

loading, unloading, conveyance

to departmental stores. stocking

Size: 150 mm NB (on header)

Lowering, laying and jointing in

position following C. I. I D/F

Reflux valves, Butterfly valves,

Sluice valves and Air valves

including cost of all labour,

jointing material,including nut

bolts and giving satisfactory

hydraulic testing, etc. complete.

Providing and supplying C. I. Air

valves of approved make &

quality of following class and

diameter including all taxes,

32 insurance, transportation, freight 1 No. 3863

charges, octroi, inspection

charges, loading, unloading,

conveyance to departmental

stores, stacking etc. complete.

Lowering, laying and jointing in

position following C. I. I D/F

Reflux valves, Butterfly valves,

Sluice valves and Air valves

33 including cost of all labour, 1 No. 251

jointing material, including nut

bolts and giving satisfactory

hydraulic testing, etc. complete.

EXPANSION BELLOWS:

Supply, installation, testing &

commissioning of flange ends

Expansion Bellow as per EJMA

standards of overall length of

minimum 300 mm, designed for

15 mm axial compression and

mm axial extension with tie rods

etc. of following MOC & pressure

MOC: Bellows: SA 240 Gr. 304;

Internal Sleeve: SA 240 Gr. 304;

Weld ends: IS 2062 Gr. B; Flanges:

IS 2062 Gr. B (Drilling as per IS

1538 / IS 6392 ) & Limit Rods &

Size: 150 mm NB- on Delivery Pipe

Size: 150 mm NB- on Header Pipe

Manufacture. Supply & Delivery

of Electric Resistance Welded (Up

to 400mm)/Submerged Arc

Welded(Above 400mm) M.S. Pipe

having beveled ends plate or coil

conforming to IS-3589-2001 or its

latest revision/ amendment for

following thickness outside

diameter at GWSSB store or sile

anywhere in Gujarat State

including all taxes. insurance,

transportation, freight charges,

octroi, inspection charges,

loading, unloading conveyance to

Departmental stores, stacking

etc. all complete. (Rate for MS

Pipe based on the ex. works price

of HR Coil as Rs.58500.00 per MT-

with outh GST (Above 3.15 mm to

10 mm) & Rs. 59000.00 per MT

without GST (Above 10 mm) as on

Jan-23.( WPI Index of H. R Coil of

Size: 168.3 mm (OD) NB-4.5 mm

thick (on Delivery side)-As per

site requirement

Lowering, laying, Jointing &

welding in position to correct line

& level M.S. Pipe with outer

gunniting & inside lining/Epoxy

painting on pedestal or chairs

36 upon prepared formation or 15 Rmt 180

prepared bedding in trenches the

rates include conveyance from

store to site of work loading,

unloading, joint plastering,

hydrotesting etc. complete.

Providing and laying in position

37 including testing following all 2 No 445

flanged cast iron blank flanges

Design, Supply, Installation,

Testing, Commissioning of Full

Bore Electromagnetic flow meter

with factory calibration, Inbuilt

Battery Power Operated, flanged

connection, Flow sensor,

Indicator, transmitter and

totaliser with all accessories viz.

surge arrestor, associated cables,

cabinets, hard wares, etc

complete as per following

specifications:

Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection,

Flanged process connection as

per IS 1538 or equivalent

standard, SS304/ Metallic Alloy

Flow Tube, SS316/ SS 316 L/

Hastelloy Sensor, SS316/

Hastelloy Grounding Ring/ Inbuilt

Grounding Electrode,

Neoprene/Polyurethane/ Hard

Rubber/ Rilsan lining, SS304/ Die

Cast Aluminum/ Carbon steel

with Anticorrosive Paint Coil

Housing with Junction Box, CS

Flow Transmitter/ Converter (

Remote Field Mounted):

Microprocessor based, Modular

design, 2 line LCD for indication

of actual flow rate, forward,

reverse, sum totaliser display,

±0.5% accuracy at 0.3 to 4 m/sec

velocity, one scalable pulse/ one

status, one Modbus output, one

GPRS/ GSM output, IP

protection, Die cast aluminium/

polycarbonate/ SS316 with

Anticorrosive Paint/ PU finish with

glass window enclosure, Inbuilt

EEPROM and Data Logger,

meters cable length for sensor to

transmitter communication,

Minimum 5 years battery lifetime,

Rechargeable Lithium-thionyl

chloride/ Ni-Cd high power

batteries, Hourly Basis

Worldwide transmission of

measured data and events via e‐

mail and SMS by integrated

GSM/GPRS modem, Reliable data

storage facility through

integrated SD card etc along with

wall mounted/ stand mounted

Meter Size : 150 mm

EOT Crane (Circular):-

Supply, installation, testing &

commissioning single girder type

fully electrically operated EOT

crane with electrically operated

hoist, class II duty, geared

travelling trolley with seven

meter lift complete with long

travel rail track (40 mm sq. bar),

moving or cross girder, all three

motions electrically operated by

suitable rating motor IP

control panel & down pendant

control block, brake, safety

device, cables form motor to

starter panel & other required

accessories & tested as per IS

Specifications.

Providing, S.I.T.C of Structure

Steel at site of work with freight,

loading, unloading carting, etc.

including all taxes and duties

complete such as joints, channels,

angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates,

Chequered plates (below 10mm

thickness) etc. required for

support structure of Elecrto-

Mechanical equipments etc. for

support on floor / wall / beam /

brackets etc. as per tender and IS. 500 Kg 89

Manufacture. Supply & Delivery

of Electric Resistance Welded (Up

to 400mm)/ Submerged Arc

Welded(Above 400mm) M.S.Pipe

having beveled ends plate or coil

conforming to IS-3589-2001 or its

41 latest revision/ amendment for 40 Mtr 1684

following thickness outside

diameter at GWSSB store or sile

anywhere in Gujarat State

including all taxes. insurance,

transportation, freight charges,

octroi, inspection charges,

loading, unloading conveyance

to Departmental stores, stacking

etc. all complete. (Rate for MS

Pipe based on the ex. works price

of HR Coil as Rs.58500.00 per MT-

with out GST (Above 3.15 mm to

10 mm) & Rs. 59000.00 per MT

without GST (Above 10 mm) as on

Jan-23.( WPI Index of H. R Coil of

Dec-22 is 144) 219.1 mm dia MS

pipe (4.5 mm THK)

SG-S/1000X1000-C1-WTM-M3-

UFO Cast Iron Wall Thimble

Mounted Sluice Gate as per IS:

13349 Standard, Size: 700 (W) x

700 (H) mm, Suitable for upto

m seating as well as unseating

Operating water head, 11 m CL-

PL distance, Manually operated

with indicating arrangement,

Rising spindle, Flush bottom

closure arrangement, Upward

Opening, Open top flange back

frame gate. (Design Head Class-II

Providing and supplying D. I. K-9

grade pipes for following nominal

bore diameter with internal

cement mortar lining including all

taxes, insurance, transportation,

freight charges, octroi, inspection

charges, loading, unloading,

conveyance to departmental

stores, stacking etc. complete. (IS

8329-2000). Rate for DI pipe

based on Wholesale Price index

of Pig Iron as 157.60 for the month

of Dec-2022. DI Pipe K-9 D/F

Manufacture, Supply & Delivery

of Ductile Iron Flange socket

spigot bends, tees, reducers or

any other specials as per BS-EN-

545/1995 Class-A series K12

suitable for use with D.I. Pipes

manufactured as per

IS:8329/1994delivery of specials

is to be made to GWSSB store or

site of works any where in Gujarat

including all taxes, loading,

unloading, carting, stacking,

insurance, inspection charges,

octroi etc. complete. Rate for

Specials 80 to 300mm dia

Providing and supplying ISI mark

CI D/F Sluice Valves as per

IS:14846 (Latest Edition) of

following class and diameter

including all taxes, insurance,

transportation, freight charges,

octroi, inspection charges,

loading, unloading, conveyance

to departmental stores, stacking

etc. complete. P.N.1.6 with hand

wheel/cap operated (PD type

short body) 150 MM Dia

Supply, testing & commissioning

of flange ends Expansion Bellow

as per EJMA standards of overall

length of minimum 300 mm,

designed for 15 mm axial

compression and 5 mm axial

extension with tie rods etc. of

46 following MOC & pressure 11 No. 4896

MOC: Bellows: SA 240 Gr. 304;

Internal Sleeve: SA 240 Gr. 304;

Weldends: IS 2062 Gr. B; Flanges:

IS 2062 Gr. B (Drilling as per IS

1538 /IS 6392 ) & Limit Rods &

Nuts: CS - IS 1367. (P.N 1.6)

Providing and supplying C. I Air

valves of approved make &

quality of following class and

diameter including all taxes,

insurance, transportation, freight

47 charges, octroi, inspection 11 No. 2496

charges, loading, unloading,

conveyance to departmental

stores, stacking etc. complete. ir

valve Double Acting (DS2) type

Providing and supplying ISI mark

G. I. pipes with Couplings of

following class and diameter

including all taxes, insurance,

transportation, freight charges,

octroi, inspection charges,

loading, unloading, conveyance

to departmental stores, stacking

etc. complete. (IS -1239) (Not for

well/tube well column pipe)

50mm dia GI pipe (Medium Duty)

Excavation for pipe line trenches

for water supply, sewerage line,

manhole etc. all with shoring and

struting if required as per

required gradient and line

49 including safety provisions using

site rails and stacking excavated

stuff including up to all required

lead cleaning the site etc.

complete for all lifts and strata as

a) IN OVERBURDEN INCL. HARD

b) IN SOFT ROCK. 2596.81 Cum 176

Providing and making flanged

joints to flanged Dl I C.l. pipes of

all classes I specials etc.

including cost of all jointing

50 756 Joint 611

materials rubber packing, nut

bolts, inclduing lowering laying

jointing labour hydraulic testing

etc. complete. 150 MM Dia

Lowering, laying and jointing in

position following C. I. / D/F

Reflux valves, Butterfly valves,

Sluice valves including cost of all

labour, jointing material,

51 including nut bolts and giving 1 No. 585

satisfactory hydraulic testing, etc.

complete. P.N.1.6 with hand

wheel/cap operated (PD type

short body) Sluice valve 150 MM

Lowering, laying and jointing in

position following C. I. / D/F Air

valves including cost of all labour,

jointing material, including nut

bolts and giving satisfactory

hydraulic testing, etc. complete.

air valve Double Acting (DS2)

Lowering, laying and jointing G. I.

pipes with G. I. specials of

following diameters in proper

position, grade and alignment as

directed by Engineer-in-charge

including conveyance from stores

to site of work, labour, giving

hydraulic testing, etc. complete,

40 mm. dia. G.I. Pipe (medium

duty) 50 MM dia

Construction of valves chambers

in brick or bela stone masonry,

locally available in C. M. 1:6.

Foundation concrete 150 mm

thick in C. C. 1:4:8 of trap metal

size 25 mm to 40 mm thick, inside

cement plaster in C. M. 1:3 and

cement pointing outside in C. M.

1:3 and top cover of precast RCC

slab 100 mm thick (with key hole

in two parts, each with handles or

MS Bar etc. complete as given

size) Upto 1 Mt. depth from G. L.

to pipe invert level incl. complete

civil works but excl. cost of

excavation and refilling, with cast

in situ RCC slab in one single

piece with fixing of CI-MH Frame

and cover (excl. cost of CI-MH

Frame and cover) with 23 mm

thick brick masonry wall in

C.M.1:6 Valve chamber of

Size 0.9 x 0.9 x 1.0 m size for Air

Providing and casting in situ C.

C. in grade M-20 (proportions as

per mix design or as per table

of IS 456 - 2000 in masses by

weigh batching) using granite,

quartzite trap metal of size 6 mm

to 20 mm for RCC work,

including scaffolding centering,

55 form work, needle vibrated 48 Cum 6722

consolidation, curing complete

up to 6 M depth or height

(excluding cost of reinforcement

and neat finishing) with

centering and shuttering etc.

complete for structure other than

water retaining. For Pedestal and

Refilling the pipeline trenches

incl. ramming, watering,

consolidating disposal of surplus 56 Cum 22

stuff as directed within a radius of

Providing C.C.M.:100 for

encasing pipes using trap metal

size 12 mm to 50 mm incl. form

57 work curing consolidation etc. 81.72 Cum 4113.80

complete for various location on

pipe line Using Trap Metal 20mm

11 kV Four Pole Structure

Assembly: SITC of 11 kV double

pole 9 meter high structure made

of 6" X 3" 'I" section girder, 4" X 2"

channels, clamps, nuts, bolts, stay

wires including earthing system

with following accessories duly

connected with ACSR conductors

as per approved drawing & in

with requirement of IEC.

(a) 11 kV, 200 A drop out fuses

with Synthetic Resin Bonded

Paper (SRBP) tubes: 2 Set (01

piece per phase / circuit).

(b) 11 kV, 400 A G.O.D. switch

complete with earth switch,

insulators, operating handle with

galvanized pipe, square bar:

(c) 11 kV lightning arrestor with

(d) 11 kV Disc Insulators (70KN):

(e) 11 kV Pin Insulators (5KN):

(f) 20 mm dia. GI. Stay Set

Complete: 2 Set

SITC of outdoor type, three

phase, oil immersed, distribution

transformer of required KVA &

voltage ratio, copper double

59 wound, vector group -Dyn11, HV 1 No.

delta connected & LV star

connected with neutral brought

out connected to provide

separate earthing terminals,

bushing / cable box on HV side

and cable box on LV side suitable

for cables or bus duct as per

requirement with standard

fittings, conforming to IS:

(Part-1) / 2014 with its latest

amendment including first fill of

transformer oil & following

(a) Oil conservator with filling

holes with cap and prismatic oil

(b) Silica Gel dehydrating

breather charged with silica gel

(c) Oil drain cum sampling valve

(d) Oil filter valve

(e) Lifting Eyes / Hooks / Lugs

(f) Two earthing terminal

(g) Diagram and rating plate

(h) Air release plug

(i) Explosion vent with diaphragm

(j) Thermometer pocket

(k) Four bi-directional plain roller

with base channel with hauling

(l) Fixed / Separate type radiator

(m) Off circuit externally

operated tapping switch (For

rating < 1000 kVA)

(n) 100 mm stem type oil

temperature indicator (For rating

(o) Buckholts relay with shut off

valve (For rating ≥ 500 KVA)

(p) 150 mm dial type oil

temperature indicator with Alarm

/ Trip contact (For rating ≥

(q) 150 mm dial type winding

temperature indicator with Alarm

/ Tip contact (For rating ≥

(r) Marshalling box (For rating ≥

(s) 150 mm dia. magnetic type oil

gauge (For rating ≥ 1600 kVA)

(t) Inspection cover & Jacking

lugs (For rating ≥ 1600 kVA)

Supply, laying, testing &

commissioning 11 / 11 kV (UE)

grade, XLPE insulated, stranded

Aluminium conductor, galvanised

steel flat strip / round wire

armoured, extruded PVC type

ST2 sheathed, heavy duty cable

(to be laid on wall surface with 35 Sq mt 1261

necessary clamps / in existing

cable trench / cable trays /

conduit / pipe sleeves at road

crossing or floor as per site

requirement) conforming to IS:

7098 (Part-2) & IEC:60502(Part-2),

of following sizes: 3 Core x

Cable Terminations / Jointing Kits

for 11 kV (UE) grade XLPE Cable

Providing & fitting heat shrink

cable termination / jointing kits

for 11 kV (UE) grade XLPE

insulated cable including

necessary earth connectivity

connection, material &

consumables making the

termination / joint complete

ensuring the joint resistance is

within the permissible limit as per

IS, of following types & sizes

3C x 240 sq mm (Indoor

Termination Kit)

3C x 240 sq mm (Outdoor

Termination Kit)

LT PMCC With APFC Panel:

Design, engineering,

procurement , installation, testing

and commissioning of PMCC

panel with totally enclosed type

as per IS: 2147 & IS-8623,

operation on three phase,415V,

62 50Hz, neutral effectively 1 No. 610500

grounded, IP 52, with instrument

compartments indicating lamps,

control contactors as per IS:

13947,relays and control fuses air

insulated . Incoming & Outgoing

feeder details shall be as per

Design & SLD Drawing. ACB/

MCCB as incomer feeder

outgoing feeder with S/D , Soft

startrer, VFD,DOL feeder & TPN

MCCB/SFU etc as per Design &

1.1 kV Grade Cable- Aluminium /

Copper Conductor

Supply, laying, testing &

commissioning 1.1 kV grade,

XLPE insulated, stranded Al/CU

conductor, galvanised steel flat

strip / roundwire armoured,

extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on

wall surface with necessary

clamps / in existing cable trench

/ cable trays / conduit / pipe

sleeves at road crossing or floor

as per site requirement)

conforming to IS:7098 (Part-1) &

(Part-1) of following siz

63 i 1.1kV,4Cx2.5 Sq. mm ,Cu 80 mtr 81

63 ii 1.1kV,3.5Cx185 Sq. mm ,Al 50 mtr 622

63 iii 1.1kV,3Cx2.5 Sq. mm ,Cu 80 mtr 86

Double Compression Brass Cable

Providing & fitting heavy duty

brass cable glands (nickel-

plated) with washers & rubber

ring conforming to IS, suitable for

3, 3½ & 4 core cables of following

64i 3 Sq mm, 2 to 4 Core 4 No. 73

64ii 185 Sq mm, 3 to 3½ Core 1 No. 522

Cable Trays & Accessories

Supply & laying GI ladder type

cable trays with side channels of

15 mm & rungs of size - 35 x15 x

15 mm spaced at 250 mm apart,

fabricated from 2 mm thick sheet

steel in standard length of

meter, duly hot dipped

galvanized after fabrication as

including accessories such as

coupler plates/ fish plates, bends,

tees, reducers, elbows, covers

and electro-galvanized hardware

etc, erected on existing support

as per specification and

instruction of Engineer-in-

A 150(W) x 75(H) x 2.0 mm Thick 30 Mtr 336

B 450(W) x 75(H) x 2.0 mm Thick 30 Mtr 439

Earthing & Lightning Protection

Providing EARTHING & Lighting

protection for Pump house,

Electrical penel room, Out side

Pump house area & Switchyard

area equipments including

Earthing pits, Electrode, GI

Strips, MS Strip as per IS 3043 &

IEEE 80 & tender specifications.

Providing and erecting Pipe type

earthing with 40 mm dia 2.5 mtr

long 'B' grade G.I. pipe with

necessary coupling buch buried

in specially prepared earth pit &

G.I. earth wire of 8 SWG erected

& connected as directed (For

For using salt and charcoal / coke

2. as required for pipe type 16 No. 170

Supplying & erecting funnel type

earthing having earth plate of

following size burred in

specifically prepared earth pit

mtr. below ground with 40 kg.

charcoal and salt with alternate

layers of charcoal & salt,

20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering &

3. bricks masonry block, C.I. Cover 4 No.

complete as per para 7.3 of IS

3043 with necessary length of

double Galvanised Iron / copper

earth wire No 6 SWG bolted with

lug to the plate and covered in

mm dia. G.I. pipe 2.5 mtr long

complete connected to the

nearest switch gear with end

socket as per direction & duly

tested by earth tester confirming

to IS (As per drawing) with

following specification

(C) with 60 x 60x 0.315 cms.

Copper earth Plate

Providing and erecting HOT deep

4. Galvanised iron strip wire 8 to 16 150 Kg. 77

Providing and erecting required

size Copper strip for earthing of

H.T. OCB / ACB/ Transformer, LT

board, Motors etc. using copper

Point wiring for Light / Fan/ Bell/

Primary Point with 2-1.5 sq. mm

& earth wire of 1.5 sq. mm (green)

both are of ISI marked 1.1 kv

grade FRLS PVC insulated multi

strand copper wires upto max

length of 10 mt, in below type of

pipe erected with 6A Tissino

Type ISI marked flush type switch

67 / bell push and accessories 12 Pt 351

erected on Metal / PVC/Wooden

Box covered with 3 mm thick

PC(Polycarbonate)

/Acrylic/Laminated sheet. with

necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

(a) with medium class Rigid PVC

pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for independent

PLUG with following size mains

earth wire of 1.5 sq.mm (green)

both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi

strand copper wires upto 10 mt

length, in following below of pipe

erected complete with ISI marked

3 / 5 Pin socket and tissino type

switch erected with earth

continuity connection erected on

Metal / PVC/Wooden box

covered with 3 mm thick

PC(Polycarbonate) /

Acrylic/Laminated sheet.

[B] 6/16A Plug and 16 amp switch

with 2-2.5 sq. mm Cu. Mains from

mcb d b boards.

(a) with medium class Rigid PVC

pipe and accessories erected

flushed on wall/ceiling complete

Supplying and erecting LED

indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB,

with housing used as a heat sink

shall be made of thick sheet Steel

conforming to IS: 513/CRCA/

aluminium die cast powder

coated and high U.V. & corrosion

resistance with diffuser with

company mark/name 160V to

270V, Power Factor more than

CCT 3000 K to 6500K,

Luminaire efficacy>

lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED

fittings.The Engineer incharge

may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral

(v) 36-40 Watts, Surge-2 KV, IP-

20, conventional 4 feet(Cat III)

Supplying and erecting LED

street light / Flood light fittings

with High power White LEDs

wattage of 3 Watt and above

assembled on single MCPCB,

efficiency more than 130 lm/w

and corrosion free High pressure

die cast aluminum housing with

69 smooth finish powder coated and 4 No. 2180

heat sink extruded aluminum with

diffuser and Polycarbonate

optics/ lenses with company

mark/name engraved or

embossed 160 to 270 V,Power

Factor more than 0.95, THD <

%, CCT 3000 K to

5700K,Uniformity ratio >0.45,

Luminaire efficacy>

lumens/watt . LED driver

efficiency > 85 %.( fittings

required LM-79 & LM-80

certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.

The Engineer in charge may

select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge

protection -4KV integral and

,Light must have 440VAC line

supply with over-voltage

(iii) above 24 to 36 watts(Cat-lll)

Supplying & erecting Steel

tubular pole (Swaged) confirming

to IS - 2713 (Part-II)

Manufacturing process of steel

tubular pole should be as per IS

specification. Basic steel tube

should be ISI Marked. Pole

70 should be painted by one coat of

Zinc comet Primer and two coat of

Aluminium /approved paint to be

erected on / in existing

Foundation. The length of poles

(A) 7.5 mtr. Long Swaged Steel

(i) pole as per IS code 410-SP-4

with 300 X 300 X 4 mm base plate

i with necessary G.I. J Bolts 4 No. 7175

(Approximate Pole weight 67 Kg)

For burial erection

Providing & erecting Approved

make Ceiling Fan with double

ball bearing ISI mark with

Condenser 230 volt A.C.50 Hz

1200 mm sweep complete having

71 3 blades aluminum body and 2 No. 2289

blade sets having ornamental

design shanks , canopy erected

with earthing. [ Make shall be

approved by Engineer in

Supplying & erecting single phase

approved make industrial exhaust

fan suitable for medium duty ring

mounted low noise operation

suitable for medium duty having

following dia size and maximum

speed in RPM [D] 450 mm dia

Providing and fixing printed

instruction chart both in English

and Gujarati and duly framed with

73 front glasses, for treatment of 2 No. 129

person suffering from Electric

shock with minimum 50"

diagonally size.

Providing pair of rubber hand

74 gloves suitable for working on 11 2 Set 212

KV/22 KV supply.

Supplying rubber matting of

75 following 12 mm thickness as per 12 Sq mt 3051

Supplying stand first AID box with

antiseptic cream, medicine for

use on wounds due burn, crepe

bandage, gauge bandage,

medicated ready to use bandage

(Band-aid) adhesive tape for

medicinal user, Scissors, anti-

septic solution (Savlon or similar)

etc. (All above contents shall be

of standard makes)

Supplying FIRE bucket round

bottom of 9 litres capacity made

out of 24 gauge G.I. sheet with

extra handle at bottom duly

77 painted white inside and Red out 3 No. 212

side with FIRE mark, filled with

dry-sand and kept on existing

stand provided or hung on wall

Supplying & erecting carbon

dioxide (CO2) fire extinguisher

user of following capacity with

78 necessary clamps made from 50 x 1 No. 8586

6 mm M.S. Flat with nut & bolts

grouted in wall complete.[B] For

5.5 / 6.5 KG Capacity

Design, Supply, Installation,

Testing, Commissioning of

Diaphragm sealed Pressure

Gauge, ±1% accuracy, Direct

bottom 1/2" NPT (M) process

connection, IP 67, Glycerine

filled, SS304 Case with Bayonet

Type Bezel, SS316 L Diaphragm,

SS316 Bottom Housing Material,

SS 316 Movement material,

Aluminium dial with black

graduation on white background,

Micro Zero adjustable pointer,

neoprene gasket, Blow out disc,

shatter proof glass, SS tag plate

etc as per IS 3624. 0 to 6 Kg/cm2

(150 mm Dial Size)

Full Bore Electromagnetic Flow

Meter- Regular Power operated

Design, Supply, Installation,

Testing, Commissioning of Full

Bore Electromagnetic flow meter

with factory calibrated, Regular

Power Operated, flanged

connection, Flow sensor,

Indicator, transmitter and

totaliser with all accessories

viz.surge arrestor, associated

cables, cabinets, hardwares, etc

complete as per following

specifications:

Flow Meter/ Sensor:DC pulsed

type, IP 68 Protection, Flanged

process connection as per IS

80 or equivalent standard, SS304/ 1 No. 82972

Metallic Alloy Flow Tube, SS316/

SS 316 L/ Hastelloy Sensor, SS316/

Hastelloy Grounding Ring/ Inbuilt

Grounding Electrode, Neoprene/

Polyurethane/ Hard Rubber/

Rilsan lining, SS304/ Die Cast

Aluminium/ Carbon steel with

Anticorrosive Paint Coil Housing

with Junction Box, CS flanges.

Flow Transmitter/ Converter (

Mounted):Microprocessor based,

Modular design, 2 line LCD for

indication of actual flow rate,

forward, reverse, sum totaliser

display, ±0.5% accuracy at 0.3 to

4 m/sec velocity, 4 to 20 mA with

HART/Modbus output, one

scalable pulse, one status output,

IP 67 protection, Die cast

aluminium/ polycarbonate/

SS316 with Anticorrosive Paint/

PU finish with glass window

enclosure, Inbuilt EEPROM and

Data Logger, 20 meters cable

length for sensor to transmitter

communication etcalongwith wall

mounted/ stand mounted cabinet.

150mm Nominal Bore

Ultrasonic Type Level Transmitter

with Remote Display :Design,

Supply, Installation, Testing and

Commissioning of NOn Contact

Ultrasonic Type Level Transmitter

with Remote Display. Sensor The

sensor should be non contact

type, field mounting type,

housing shall have minimum IP65

protection, PP/ PVC Sensor MOC,

with sensor to transmitter cable.

Remote Indicator cum

Transmitter: Microprocessor

based indicator with LED / LCD

digital display ,panel/ wall

mounting type, power supply

shall be 110-240 Vac or 15 to

Vdc, 50 Hz ± 10 %.Accessories:

Mounting bracket, nut, bolts etc

as per system requirement and

Hook up diagram of the

Instruments .Level Transmitter

shall be suitable for following

Design, manufacture, supply,

installation, testing and

commissioning of indoor type

PLC panel with 10" HMI and

necessary hardware, fabricated

out of min. 2 mm thick CRCA

sheet complete with latest

configuration PC, necessary

programming for SCADA

software and comprising of all

accessories. The I/O's with

minimum of 20% spare with

respect to the specification as

directed by Officers

Cable and accessories:-Supply,

laying, testing & commissioning

Overall Shielded Armored Cable,

stranded CU conductor with all

accessories as as directed by

1 PAIR X 1.5 SQ MM CU 30 Mt 211.20

2 PAIR X 1.5 SQ MM CU 40 Mt 342.10

4 PAIR X 1.5 SQ MM CU 40 Mt 574.20

Operation and Maintenance for

below years of entire scheme

including all types of repairs in

entire scheme including field and

pump house components, all

types of daily operations

84 For 10 Years of O&M 6178223.00

required for successful

commissioning of entire scheme.

Hence, no provision for materials,

spares, oil and lubricants and

other materials required for

Crop Compensation 28000 Sq mt 17