Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 CrAccepted-AOC | L1 | Accepted-AOC The bidder quoted reasonable rate. | |
| 2 | Rejected-Technical DADRA AND NAGAR HAVELI DN | - | Rejected-Technical The bidder did not fulfilled the required Essential Qualifying Criteria as mentioned in tender document. | |
| 3 | Rejected-Technical | - | Rejected-Technical The bidder did not fulfilled the required Essential Qualifying Criteria as mentioned in tender document. |
Tender Value
₹20.6 Cr
EMD Value
₹16.3 L
Closing Date
25 Feb 2022, 6:00 pmClosed
Project Director
Office of the Project Director, Ircon International Limited, Plot no. 1/7/2, Vaishnav Nagari, Nr. Ayappa Temple, Atul- Parnera Road, Distt. Valsad, Gujarat -396007
Construction, Providing of Roofing with Structural steel, Corrugated GI sheets on approaches of Road under Bridges at Level Crossings between DFC Ch 113.360 and Ch 25.725 between Saphale and Valsad in connection with constru of WDFC CTP 12 Project.
2022_IRCON_104325_1
IRCON/3018/DFCCTP12/e Tender/RUBs/Roof Cover/8-414
Open Tender
Civil Works
Percentage
121 days
Valsad to Palghar
Please refer tender document
7 documents required · 7 mandatory
₹30,000
Ircon International Limited
₹16.3 L
Valsad
2 Jun 2022
5 Feb 2022
26 Feb 2022
5 Feb 2022
25 Feb 2022
12 Feb 2022
5 Feb 2022 - 7 Feb 2022
11 Feb 2022
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Schedule A for SS1 section (Maharashtra) | - | - | - | - |
| 2 | Supplying, Fabricating & Erection in posion structural steel section such as ISMC, ISMB, MS Angle, MS plate of different types on junctions, nuts, anchor bolts, holding, down bolts and all other works as per approved drawing, specifications and as directed by Engineer-in-charge. Rate is inclusive of contractor's materials, steel, MS plate, cutting, hoisting, welding, jointing, bolting, fabrication, erection, fixing in position, labours, machineries, Tools & Plants, all leads & lifts, Taxes, including painting with one coat of red oxide primer and three coats of synthetic enamel paints of approved quality etc complete.
Note: (1) The steel shall be free from any dust, rust, foreign particles etc. (2) The payment shall be made only after completion of work at site as per approved drawings (3) No piece shall be used except otherwise necessary and that too as per actual requirement (4) The steel shall be from SAIL/TISCO/JINDAL/RINAL/ESSAR only. | 362.19 | MT | 88,179.5 | ₹3,19,37,733.11 |
| 3 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter filled with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Rate is inclusive of contractor's materials, steel, labours, all leads & lifts, machineries,Tools & Plants, taxes, etc complete.
Note: (1) The Corrugated G.S. Sheet shall be free from any dust, rust, foreign particles etc. (2) The payment shall be made only after completion of work at site as per approved drawings (3) No piece shall be used except otherwise necessary and that too as per actual requirement (4) The G.S. sheet shall be 0.63 mm thick with zinc coating not less than 275 gm/ m² from SAIL/TISCO/JINDAL/RINAL/ESSAR only. | 7,150 | Sqm | 915 | ₹65,42,250 |
| 4 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet 0.63 mm thick with zinc coating not less than 275 gm/m² fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. | 791 | Metre | 710.14 | ₹5,61,720.74 |
| 5 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet (0.63 mm thick with zinc coating not less than 275 gm/m²) gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. | 1,582 | Metre | 705.69 | ₹11,16,401.58 |
| 6 | Schedule B for SS2 section (Maharashtra) | - | - | - | - |
| 7 | Supplying, Fabricating & Erection in posion structural steel section such as ISMC, ISMB, MS Angle, MS plate of different types on junctions, nuts, anchor bolts, holding, down bolts and all other works as per approved drawing, specifications and as directed by Engineer-in-charge. Rate is inclusive of contractor's materials, steel, MS plate, cutting, hoisting, welding, jointing, bolting, fabrication, erection, fixing in position, labours, machineries, Tools & Plants, all leads & lifts, Taxes, including painting with one coat of red oxide primer and three coats of synthetic enamel paints of approved quality etc complete.
Note: (1) The steel shall be free from any dust, rust, foreign particles etc. (2) The payment shall be made only after completion of work at site as per approved drawings (3) No piece shall be used except otherwise necessary and that too as per actual requirement (4) The steel shall be from SAIL/TISCO/JINDAL/RINAL/ESSAR only. | 1,057.64 | MT | 88,179.5 | ₹9,32,62,166.38 |
| 8 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter filled with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Rate is inclusive of contractor's materials, steel, labours, all leads & lifts, machineries,Tools & Plants, taxes, etc complete.
Note: (1) The Corrugated G.S. Sheet shall be free from any dust, rust, foreign particles etc. (2) The payment shall be made only after completion of work at site as per approved drawings (3) No piece shall be used except otherwise necessary and that too as per actual requirement (4) The G.S. sheet shall be 0.63 mm thick with zinc coating not less than 275 gm/ m² from SAIL/TISCO/JINDAL/RINAL/ESSAR only. | 34,144.57 | Sqm | 915 | ₹3,12,42,281.55 |
| 9 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet 0.63 mm thick with zinc coating not less than 275 gm/m² fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. | 2,071.61 | Metre | 710.15 | ₹14,71,153.84 |
| 10 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet (0.63 mm thick with zinc coating not less than 275 gm/m²) gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. | 4,250.21 | Metre | 705.69 | ₹29,99,328.58 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
BOQ.pdf
BOQ Document • 0.40 MB
BOQ_113584.xls
BOQ Document • 0.26 MB
92008548.pdf
Tender Document • 0.48 MB
GCC16_02_2021.pdf
Tender Document • 17.61 MB
AttachmentClause44.2ofGCC032.pdf
Tender Document • 0.22 MB
Section7_SHE3.pdf
Tender Document • 2.67 MB
Tender_Acceptance_Letter.pdf
Tender Document • 0.08 MB
AnnexureXIII.pdf
Tender Document • 3.72 MB
Section10_CAR_Policy.pdf
Tender Document • 4.50 MB
Tech_bid_RUBs_roofing_work.pdf
Tender Document • 1.38 MB
Tender_Drawing_Part_1.pdf
Tender Document • 36.89 MB
Tender_Drawing_Part_2.pdf
Tender Document • 34.08 MB
Tender_Drawing_Part_3.pdf
Tender Document • 8.62 MB
92008550.html
Tender Document • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .