Strengthening of Maternity Wing at DH Vadakara Kozhikode

Amount

Civil works

5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level

4.2.3 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

50.6.1.6 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level thickness 20cm and above in : CM 1:6 ( 1 cement : 6 coarse sand sand) etc complete

50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

13.11 : 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 ( 1 cement : 6 fine sand).

11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

9.141 : Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (±0.2mm), made out of single piece extruded PVC profile, with mitred cut joints and with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer-in--charge.

9.142.1 : 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded solid PVC ( ±0.2 mm) thick, having styles & rails (except lock rail ) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinges side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm x 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm x 100 mm of cross section size 35 mm x 17 mm s 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge.Non decorative finish (matt finish)

od302921/2021_2022 : od88098/2020_2021 : Supplying and fixing 75mm thick 75x50mm section powder coated aluminium partition using standard quality 1.5 mm thick, heavy duty section of approved make at 900-1000mm centeres bottom panel 12mnm pre laminated board of standard quality upto 1200 mm ht, mid panel 6mm fixed glass upto 2400mm height with channels, beading,gaskets to hold the glass and balance half portion divided to two parts lower part covered with 12 mm both sides laminated board and next half with 5mm aluminium pre fab grill so as to fix the ceiling channel over aliuminium horizontal frame : For doors including Hinges,toer bolts,Sliding rails,Pullies door handles, locking arrangements,rubber bush, door stopper etc.<br><br>

9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

13.48.3 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

9.7.7.1 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Float glass panes4 mm thick glass pane

21.1.1.3 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron )

8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Plumbing works

17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

17.7.2 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap

50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

17.70.2 : Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms

17.71 : Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

17.73.1 : Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm. weighing not less than 170 gms

18.50.1 : Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore

18.58.2.1 : Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round grating

50.18.8.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2

50.18.9.17.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall

50.18.9.19.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl

18.49.1 : Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore

17.29 : Providing and fixing 100 mm sand cast Iron grating for gully trap.

50.18.9.20.5 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee

50.18.9.21.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend

50.18.9.20.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend

50.18.9.21.2 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia 45 degree Elbow

50.18.9.20.10 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer

50.18.9.21.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75x75x75 mm dia Tee

50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee

50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.2 : Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow

50.18.9.22.12 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x75 mm dia Reducer

50.18.9.22.11 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling

50.18.8.2.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chased and making good the wall etc. 20 mm pipe 12 Kgf/cm2

50.18.8.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2

Electrical works

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B

1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.17.32 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 x 6 sq. mm

1.18.2 : Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet

1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.28.1 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

1.38 : Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

1.58 : Supplying and fixing PVC batten/ angle holder including connection etc. as required.

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

od314705/2021_2022 : od88173/2020_2021 : Supply and wiring light points according to IS 732-1989 using rigid black / ivory medium class PVC conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.50 mm² PVC insulated stranded single core FRLS copper conductor cable of 650V grade including providing switch board main and continuous earthing with 1.50 mm² PVC insulated stranded single core FRLS copper conductor cable of 650V grade, required quantity of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc up to and including 6A modular type RoHS compliant SP switches and making good the surface of wall, colour washing etc complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. <br>group A (1.10.1)<br>

od314727/2021_2022 : od88180/2020_2021 : Supply and wiring ceiling fan points (excluding fan & regulator) according to IS 732-1989 using rigid black / ivory medium class PVC conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.50 mm² PVC insulated stranded single core FRLS copper conductor cable of 650V grade including providing switch board main and continuous earthing with 1.50 mm² PVC insulated stranded single core FRLS copper conductor cable of 650V grade, required quantity of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc up to and including 6A modular type RoHS compliant SP switches and making good the surface of wall, colour washing etc complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. <br><br>

od314750/2021_2022 : od88181/2020_2021 : Supply and wiring combined plug points according to IS 732-1989 using rigid black / ivory medium class PVC conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.50 mm² PVC insulated stranded single core FRLS copper conductor cable of 650V grade including providing switch board main and continuous earthing with 1.50 mm² PVC insulated stranded single core FRLS copper conductor cable of 650V grade, required quantity of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc up to and including 6A modular type RoHS compliant SP switches and making good the surface of wall, colour washing etc complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. <br><br>

od314754/2021_2022 : od88182/2020_2021 : Supply and wiring call bell points (excluding call bell) according to IS 732-1989 using rigid black / ivory medium class PVC conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.50 mm² PVC insulated stranded single core FR copper conductor cable of 650V grade including providing switch board main and continuous earthing with 1.50 mm² PVC insulated stranded single core FR copper conductor cable of 650V grade, required quantity of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc up to and including 6A modular type RoHS compliant SP switches and making good the surface of wall, colour washing etc complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. <br>Group A<br>

od314761/2021_2022 : od88183/2020_2021 : Supply and wiring exhaust fan points (excluding exhaust fan) according to IS 732-1989 using rigid black / ivory medium class PVC conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.50 mm² PVC insulated stranded single core FRLS copper conductor cable of 650V grade including providing switch board main and continuous earthing with 1.50 mm² PVC insulated stranded single core FRLS copper conductor cable of 650V grade, required quantity of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc up to and including 6A modular type RoHS compliant SP switches and making good the surface of wall, colour washing etc complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. <br>Group A (1.10.1)<br>

od314763/2021_2022 : od88185/2020_2021 : Supply and drawing the following sizes of multi-core PVC insulated & PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface/recess conduit as required including giving necessary connections of the following sizes. (Make: HPL or RR Kabel)<br><br>

od314797/2021_2022 : od88186/2020_2021 : Supply and drawing the following sizes of multi-core PVC insulated & PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface/recess conduit as required including giving necessary connections of the following sizes. (Make: HPL or RR Kabel)<br><br>

od314969/2021_2022 : od88189/2020_2021 : Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.<br>

od315020/2021_2022 : od88191/2020_2021 : Supply, conveyance, installation, testing and commissioning of ceiling fans (5-star rated) of the following sizes using standard accessories excluding regulator, wiring the down rod with 16/0.20 mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc as required. (Make: Bajaj or Crompton)<br><br>

od315045/2021_2022 : od101258/2020_2021 : Supplying and Installing 1.5 T AC unit<br>

od315052/2021_2022 : od88206/2020_2021 : Charges for cutting holes suitable for accommodating exhaust fans of sizes up to 450 mm including plastering, colour washing etc as required. (1.50.1)<br><br>

od315109/2021_2022 : od88207/2020_2021 : Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. (Make: Havells or Crompton)<br>450 mm, single phase, heavy duty, 1400 rpm exhaust fan in metal frame.<br>

od315136/2021_2022 : od88208/2020_2021 : Supply & fixing the following types / sizes of boxes suitable for modular accessories on surface including making good the damages, colour washing etc as required. <br>2 module plastic box on surface<br><br>

od315155/2021_2022 : od88209/2020_2021 : Supplying and fixing following ways, horizontal type, 415 V, three pole and neutral (TPN), sheet steel, MCB distribution board conforming to IEC 61439-3 (IP 43) on surface / in recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar din bar for mounting MCBs (But without MCB / RCCB / ISOLATOR), prefitted masking sheet, interconnections, powder painted including earthing etc as required. (Make: ABB or Legrand)<br>6 way (8+18) double door TPN DB. (2.4.2)<br><br>

od315219/2021_2022 : od88210/2020_2021 : Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. (Make: Legrand)<br>RJ45 Cat 6 computer socket with shutter<br>

od315220/2021_2022 : od88211/2020_2021 : Earthing with GI earth pipe of 2 metre long and 40 mm dia including all accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/ coke and earth compound as required.<br><br>

od315225/2021_2022 : od88212/2020_2021 : Supply,design and fabrication of cubicle type CT meter box made out of 16SWG CRCA sheet ,dust and vermin proof free with top/bottom entry for cable entry complete with all interconnections, powder coating ,control wiring etc with provision for mounting CTs ,cut outs and settable type MCCBs.<br>

od315226/2021_2022 : od88213/2020_2021 : Supplying and fixing following rating RCCB suitable for 50 Hz, 240/415 V, AC supply conforming to IS 12640-1 in the existing MCB DBs complete with connections, testing, commissioning etc as required. (Make: ABB, HPL or Legrand)<br>63A 4-pole 30mA RCCB <br><br>

od315227/2021_2022 : od88214/2020_2021 : Charges for obtaining 3-phase LT connection from KSEB which includes preperation of necessary drawings, executing required paper works, conducting inspections, remitting statutory fees etc complete as required. The amount will be reimbursed subject to the production of original receipts.<br>

od315230/2021_2022 : od88215/2020_2021 : Supply and providing test joint for the earthing system using 2 nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.<br>2x25x3 mm tinned copper strip<br>

od315231/2021_2022 : od88216/2020_2021 : Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors / strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.<br>3.15 mm copper conductor (10 SWG)<br>

od315232/2021_2022 : od88184/2020_2021 : Supply, conveyance, installation, testing and commissioning the following types of light fittings with all accessories directly on wall / in existing false ceiling and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required. (Make: Havells or HPL)<br>20W LED Tube. <br><br>

od317113/2021_2022 : Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

od317114/2021_2022 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

HVAC Works

od21964/2022_2023 : "Supply, Errection, Testing and Commissioning of Double Skinned Floor Mounted Air Handling Units as per specification complete with minimum 40mm thick panel with minimum 0.6 mm thick GI sheet for outer skin and minimum 0.6 mm thick AL sheet for inner skin . All the panel shall incorporate with 40kg/m3 PUF insulation sandwiched in between inner and outer skin along with Fan section with Plug Fans, suitable rated TEFC motor with necessary drive arrangements with VFD , Coil section with 6 Row deep DX cooling coil with insulated drain pan, Filter section with 10 micron pre filters and 5 micron Fine filters, Mixing Box Section with FA and RA Dampers<br>(Make : VTS/FINPOWER/URJAS)"<br>"Horizontal Floor /Ceiling Mounted AHU<br>8.5 TR/ 3000 CFM/ 6 RD/ 80 mm ESP"<br>

od21965/2022_2023 : "Supply, Errection, Testing and Commissioning of Double Skinned Floor Mounted Air Handling Units as per specification complete with minimum 40mm thick panel with minimum 0.6 mm thick GI sheet for outer skin and minimum 0.6 mm thick AL sheet for inner skin . All the panel shall incorporate with 40kg/m3 PUF insulation sandwiched in between inner and outer skin along with Fan section with Plug Fans, suitable rated TEFC motor with necessary drive arrangements with VFD , Coil section with 6 Row deep DX cooling coil with insulated drain pan, Filter section with 10 micron pre filters and 5 micron Fine filters, Mixing Box Section with FA and RA Dampers<br>(Make : VTS/FINPOWER/URJAS)"<br>"Horizontal Floor Mounted AHU<br>11 TR/ 3800 CFM/ 6 RD/ 80 mm ESP"<br>

od21966/2022_2023 : "Supply Installation, Testing & Commissioning of DX Split Outdoor unit with Filter Drier, Condensing Coil, Expansion device & Connectors having following nominal capacity Scroll Compressor with R410/407 refrigerant complete with channel supports & vibration isolators.<br>(Make : DAIKIN/HITACHI/BLUESTAR)"<br>11 TR<br>

od21967/2022_2023 : "Supply Installation, Testing & Commissioning of DX Split Outdoor unit with Filter Drier, Condensing Coil, Expansion device & Connectors having following nominal capacity Scroll Compressor with R410/407 refrigerant complete with channel supports & vibration isolators.<br>(Make : DAIKIN/HITACHI/BLUESTAR)"<br>8.5 TR<br>

od21968/2022_2023 : Supply, Installation, Testing & Commissioning of AL Sheet metal ducting work complete with all fittings such as Tee, Bends, Turning vanes including, suspension and supporting arrangement as required and necessary joints sealed with silicon.<br>ALUMINIUM 20 G <br>

od21969/2022_2023 : Supply, Installation, Testing & Commissioning of AL Sheet metal ducting work complete with all fittings such as Tee, Bends, Turning vanes including, suspension and supporting arrangement as required and necessary joints sealed with silicon.<br>ALUMINIUM 22 G<br>

od21970/2022_2023 : "Powder coated extruded Aluminium Return air Grilles with horizontal fixed bars and end flanges complete without Aluminium collar dampers.<br>(Make : AIRMASTER/COSMIC/CARYAIRE)"<br>

od21971/2022_2023 : SITC of Fresh Air arrangements with bird screen, and VCD<br>

od21972/2022_2023 : SITC of Extract Air arrangements with Louvers, back draft dampers and VCD's<br>

od21973/2022_2023 : SITC of Extruded Aluminium Volume Control Dampers complete with flanges, channels and control levers suitable for duct mounting<br>

od21978/2022_2023 : Supply, Laying and Fixing of Power and Control cabling between indoor and outdoor units with required specification<br>

od21979/2022_2023 : SITC of PVC drain pipe of required dia with 9mm thick rubber sleeve to the nearest drain point.<br>

od22009/2022_2023 : Inline Duct fan of required cfm with speed regulator<br>

od22010/2022_2023 : Refrigerant Gas R410/407<br>

od22011/2022_2023 : SITC of electric strip heaters in supply air plenum/AHU complete with fixing arrangements, thermostats and safety thermostat including all power and control wiring.<br>

od22012/2022_2023 : AHU Panel with By-Pass Sarter<br>

od22115/2022_2023 : "Supply, Installation, Testing & Commissioning of suitable Hard drawn Copper refrigerant piping with 13mm nitrile rubber insulation for both Suction & Liquid line interconnecting outdoor and indoor unit.<br>"5.5 TR<br><br>

od22116/2022_2023 : "Supply, Installation, Testing & Commissioning of suitable Hard drawn Copper refrigerant piping with 13mm nitrile rubber insulation for both Suction & Liquid line interconnecting outdoor and indoor unit.<br>"<br>8.5 TR<br>

od22117/2022_2023 : "SITC of Thermal insulation of ducts using Closed cell Anti-Microbial Nitrile Rubber insulation with recommended adhesives and sealed with black self adhesive tape of same material. <br>SITC of Flexible connection made out of fire resistant flexible double canvas sleeve.<br>

od22118/2022_2023 : "SITC of Thermal insulation of ducts using Closed cell Anti-Microbial Nitrile Rubber insulation with recommended adhesives and sealed with black self adhesive tape of same material. <br>13 mm thick Anti microbial Nitrile Rubber<br><br>

Major OT (Civil)

od22324/2022_2023 : "Supply and Installation of 2 DOME OT Light with following features<br>*Ceiling mounted Dual Dome LED OT lights<br>*Intensity at 1 meter distance should be 160000 lux.<br>*Should be regulated from 100000 lux to 160000 lux.<br>*Colour Temperatur: 4300k<br>*On/off switch control on Dome.<br>*Should have homogeneous luminious field<br>*Illuminated field diameter should be approx. 240mm.<br>*LED Life span should be minimum 3000 hours.<br>*Light field adjustment should be by sterilizable handle.<br>*The light head should be so constructed as to provide optimum conditions for laminar flow<br>"<br>

od22325/2022_2023 : Supply & Installation of Copper Pipe Line work inside OT with all necessary accessories required<br>

od22326/2022_2023 : "<br>2 bay Surgical Scrub Sink made out of 304 Stainless Steel & seamless welded construction polished to a satin finish having front acess panel with Elbow Operating<br><br>"<br>

od22327/2022_2023 : "Single Arm moveable pendant with 1000 mm long arm with Horizontal movements having weight carrying capacity of the arm will not be less than 100 Kgs, one monitor shelf and provision for six electrical sockets 5/15 Amp and gas outlets. <br>"<br>

od22328/2022_2023 : "Providing, Fixing, Supply and Installation of Operating Writing List Board of size ( 900mm x 600mm )<br>"<br>

od22329/2022_2023 : "Providing, Fixing, Supply and Installation and Commissioning of proper Pressure Relief Dampers having multi 304 graded stainless steel blades for maintaining the positive pressure inside the operation theatre to the desired level.<br>"<br>

od22330/2022_2023 : "Providing, Fixing, Supply, Installation, Testing and Commissioning of Two Plate dimmable X-Ray viewing screen (948mm x 648mm) designed to provide a high level of control luminance without flicker. (Dimming Range 3-100%) <br>"<br>

od22331/2022_2023 : "Providing, Fixing, Supply, Installation, testing and Commissioning of Membrane type Surgeon Control Panel( 6 services ) ,mounted flush in the theatre wall alongwith Distribution Board comprising of the following : <br>-1 No Day time Clock (Digital) <br>-1 No Lapse Time Clock (Digital) <br>-1Hands free telephone <br>-1 No Medical Gas Alarm <br>-1 Set indicator for temperature & humdity display <br>-1 Peripheral Lighting On/Off with dimming Control <br>"<br>

od22332/2022_2023 : "Supply, Installation, and Commissioning of Hermetically Sealed Single Leaf Swing Door Having 0.8 mm(SS 304 grade) Stainless Steel on both sides and vision panels (300x300mm)<br>( Size : (1100 x 2100 ) <br>"<br>

od22333/2022_2023 : "Supply, Installation, Testing & Commissioning of laminar station and Aluminium plenum as follow: Laminar flow diffuser essentially should consists in: A plenum, constituting the pressurization chamber, entirely constructed of Aluminium sheet, with smooth finish to prevent dust collection. Four square flanges are mounted to connect the plenum to air distribution ducts. External stiffening ribs and anticondensation insulation. Supply air filter housing. Filtering unit consisting of absolute filters with efficiency > 99,995%. Classification: CEN EN 1822 - H14. Sealed, central component for connection of the surgical lamp. Lower component should consists of 1mm-thick 304 stainless steel panels with conveniently sized slots to assure the requested flow. The special system allows the perforated panels to be locked in and fully opened for easy and safe servicing and replacing of filters. Mounting frame, constructed so as to assure sealed connection to the suspended ceiling, and perfect separation from the controlled work area by means of synthetic rubber seals. Diffuser Size: 2400x2400MM<br>"<br>

od22334/2022_2023 : "Supply and installation of Imported Vinyl Floor: Seamless Anti-Bacterial vinyl flooring system, 2mm thick, with perfectly curved flush covings, all joints welded properly including wall Skirting. Base pcc/ vdf will be in scope of client. 3mm self levelling in scope of OT vendor.<br>"<br>

od22335/2022_2023 : "Supply & installation of Pre Fabricated Modular Operation Theatre Wall using 0.8mm EGP sheet on front side and 0.8mm PPGI sheet on back side of the 50mm thick Puff Panel. Filling of all joints and cavities with epoxy filler and sanded flush to provide a seamless finish .Applied with minimum two coats of Antibacterial & Antifungal paint ,wall glaze or equivalent to a minimum dry film thickness of 300 microns having overlap floor covering ,ceiling system and door frames by 25mm to provide a continous sealed surface <br>"<br>

od22381/2022_2023 : "Supply, Installation, and Commissioning of Hermetically Sealed Door Having 0.8 mm(SS 304 grade) Stainless Steel on both sides and vision panels (300x300mm) , for smooth sliding .The door moves on nylon wheels within an single piece aluminium extruded track. Size is (1500 x 2100 ) <br> "<br>

Major OT (Electrical)

od22411/2022_2023 : "Providing and Insatalling of Distribution Board with MCB and ELCB for electrical wiring inside Operation Theatre incuding wiring, sockets and switches etc.<br>"<br>

od22412/2022_2023 : "Recess mounted IP54 protocol, non-hygroscopic peripheral lights for clean room application each set having (2x36 W ) compact flurecent lamps and digital ballast with dimmer control (Suitable for Clean room Class 100 application)<br>"<br>

Fire Fighting

od187167/2022_2023 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25mm dia

od187168/2022_2023 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 32mm dia

od187169/2022_2023 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 40mm dia

od187170/2022_2023 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50mm dia

od187171/2022_2023 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 65mm dia

od187172/2022_2023 : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia

od187173/2022_2023 : Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal

od187174/2022_2023 : Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal

od187175/2022_2023 : Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous<br>connection to interconnect hose pipe coupling as required : Gun metal

od187176/2022_2023 : Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipment on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m

od187177/2022_2023 : Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler

od187178/2022_2023 : Supplying and fixing Dry Chemical Powder Fire Extinguishers on the wall with suitable clamp/support frame as required : 4 Kg

od188228/2022_2023 : Supplying and fixing Clean Agent Fire Extinguishers on the wall with suitable clamp/support frame as required : 4 Kg.

SHIJITH M

Bidder Name

RAJEEV P I

SHIJITH M