Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.2 LAccepted-AOC PO CHAUBATIA RANIKHET DISTT ALMORA UTTARAKHAND 263645 | ALMORA | UTTARAKHAND | 263645 | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹24.9 L+₹1.2 L (5.27%)Rejected-Finance WARD NO 4 NEAR MASZID BHATTAGAON DISTT JHANSI 284001 UTTAR PRADESH | JHANSI | UTTAR PRADESH | 284001 | L2 | Rejected-Finance Not being lowest tenderer |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
1 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE RANIKHET
GE MES RANIKHET
CA NO. GE /RKT/03 OF 2024-2025 PETTY REPAIR AND DAY TO DAY COMPLAINT TO ALL MD/OTM ACCN AND PERIODICAL SERVICES TO MD/OTM ACCN AT CHAUBATIA UNDER GE RANKHET
2024_MES_649041_1
GE/RKT/03 OF 2024-25
Open Tender
Civil Works
Item Rate
270 days
Chaubatia under GE Ranikhet
as Per NIT
6 documents required · 6 mandatory
₹500
GE RANIKHET
₹70,000
Yes
22 May 2024
2 Apr 2024
3 May 2024
2 Apr 2024
1 May 2024
17 Apr 2024
Amount
Attending day to day complaints related to joinery work such as repairs to cupboard, kitchen shelves, pelmet box, easing of doors and windows, kitchen knobs fitting and fixing wire mesh, glass, repair of aluminum shutters etc as ordered/required on all working day to attend the complaint cell by rep of contractor at 0900am and report to complaint cell at every evening at 0500pm on daily basis after satisfactory completion, complete all as specified and directed. Material such as nails, screws, washers, putty/beading for glass, nut & bolts shall be included in the quoted rate. Note :- (i) The complaint against docket shall be taken from MES Complaint cell at every morning at 0900 am by rep of contractor on daily basis. (ii) Every docket will submitted at complaint cell on daily basis of same day at 0500 pm or early morning on next day after satisfactory completion. (iii) Necessary T&P, equipment and safety gear shall be provided by the contractors. (iv) Rs. 125.00/ complaint shall be recovered against non attending of every complaints within 48 hours (including Sunday and holiday) from the date & time noting the complaint in MES complaint register. (v) Material will be measured (after fixing) and paid separately as supply only under respective items.
Supply only for 4mm thick plywood, graded BWR, type BB fixed to timber frame work of any thickness complete all as specified and directed.
Supply only for 6mm thick plywood, graded BWR, type BB fixed to timber frame work of any thickness complete all as specified and directed.
Supply only for 9mm thick plywood, graded BWR, type BB fixed to timber frame work of any thickness complete all as specified and directed.
Supply only Galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm including necessary beadings and fillets complete all as specified and directed.
Supply only 3mm thick sheet glass ordinary quality, in square or required shape n exc 0.50 Sqm each pane including oil putty complete all as specified and directed.
Supply only 4mm thick figured glass pin headed type in square n exc 0.50 Sqm, in square or required shape of each pane including oil putty complete all as specified and directed.
Supply only 150mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. .
Supply only 100mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. .
Supply only 150mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed.
Supply only 100mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed.
Supply only 250mm long sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
Supply only mirror cabinet 400 mmX 500mm hanging system and clamps support complete all as specified and directed.
Supply only corner glass shelf 300mm (with brass brackets) complete all as specified and directed.
Attending day to day complaints pertaining to different type of repairs of steel windows, handles, door springs, frame, rolling shutter of garage , repair by welding etc (run or spot welding as per site requirement) on all working day to attend the complaint cell by rep of contractor at 0900am along with welding machine, gloves, welding glass, welding rod etc any other tools required and report to complaint cell at same day at 0500pm on daily basis after satisfactory completion, , as per time to time requirement complete all as specified and directed. Note :- (i) The above task shall be carried out by deploying Minimum 01 No Welder and 01 No of helper on daily basis. (ii) Necessary T&P, equipment and safety gear shall be provided by the contractors. (iii) Contractor or his auth rep shall sign the Attendance register and Demand register daily. (iv) Rs. 125.00/ complaint shall be recovered against non attending of every complaint within 48 hours (including Sunday and holiday) from the date & time noting the complaint in MES complaint register. (v) Material will be measured (after fixing) and paid separately as supply only under respective items.
Supply only 100 mm long MS butt hinges medium weight cold rolled complete all as specified and directed.
Supply only 75 mm long MS butt hinges medium weight cold rolled complete all as specified and directed.
Attending day to day complaints related to water supply only & plumbing work such as leakage of bib cock/ pillar cock/ stop cock angle valve of any description changing the washers, cleaning of air lock in the pipe, leaking low level or high level flushing cistern by adjusting the float valve and including removal and replacement of rubber washer in PVC siphons and adjusting the float valve of over head tanks and leaking PVC bends/galvanised iron pipes etc as per site requirement on all working day to attend the complaint cell by rep of contractor at 0900am and report to complaint cell at same day at 0500pm on daily basis after satisfactory completion, complete all as specified and directed. Material such as threads, washers, lead etc shall be included in the quoted rate. Note :- (i) The complaint against docket shall be taken from MES Complaint cell at every morning at 0900am by rep of contractor on daily basis. (ii) Every docket will submitted at complaint cell on daily basis of same day at 0500 pm or early morning on next day after satisfactory completion. (iii) Necessary T&P, equipment and safety gear shall be provided by the contractors. (iv) Rs. 125.00/complaint shall be recovered against non attending of every complaints within 48 hours (including Sunday and holiday) from the date & time noting the complaint in MES complaint register. (v) Material will be measured (after fixing) and paid separately as supply only under respective items.
Supply only 15 mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply only' flushing cistern kit' for complete set to fitted inside as per required for cistern functional complete all as specified and directed.
Supply only 15 mm bore bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply only 15 mm bore stop valves, cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Supply only 20 mm bore stop valves, cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Supply only 15 mm bore stop valves, fancy type chromium plated cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Supply only 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
Supply only 15 mm brass CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
Supply only 32mm waste fittings, brass, chromium plated for wash hand basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.
Supply only 40 mm waste fittings, brass, chromium plated for wash hand basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.
Supply only round slotted Grating doom 80mm dia of CP complete all as specified and directed.
Supply only round slotted Grating doom 102mm dia of CP complete all as specified and directed.
Supply only 15mm PTMT Bib tap standard of any colour screwed, for iron pipe and fixed complete all as specified and directed.
Supply only 15mm Ball valves/ float valve, high pressures of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) complete all as specified and directed.
Supply only 20 mm Ball valves/ float valve, high pressures of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) complete all as specified and directed.
Supply only water tank cover for tanks of size 500 ltr or 1000 ltrs complete all as specified and directed.
Supply only PVC seat cover for EWC of white colour complete all as specified and directed.
Supply only Jet, chromium plated, screwed down high pressure with or without lettered Hot or Cold with lenght not less than 1.0mtr long , fixed for flange with WC, complete all as specified and directed.
Supply only Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
Supply only 15mm bore steel water tubing medium grade galvanized for fixed to walls, floors, roof ceiling etc including thread, soluvent and etc complete all as specified and directed.
Supply only 20mm bore steel water tubing medium grade galvanized for fixed to walls, floors, roof ceiling etc including thread, solvent and etc complete all as specified and directed.
Supply only PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
Supply only PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
Supply only 15mm bore dia GI nipple and socket complete all as specified and directed.
Supply only 20mm bore dia GI nipple and socketcomplete all as specified and directed.
Supply only 15mm bore dia GI Elbow and Tee complete all as specified and directed.
Supply only 20mm bore dia GI Elbow and Tee complete all as specified and directed.
Supply only 20mm bore dia socket reducer and Tank connection complete all as specified and directed.
supply only 15mm bore dia GI union complete all as specified and directed.
supply only 20mm bore dia GI union complete all as specified and directed.
supply only 32 to 40mm dia PVC waste pipe for wash basin and kitchen sink complete all as specified and directed.
Supply only brass chromium plated shower rose 125mm size complete all as specified and directed.
Supply only soap dish, vitreous china white , approximate size 160x160x90mm complete all as specified and directed.
Supply only vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and directed.
S&F 500 ltr capacity rotational mounded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling unserviceable PVC/ cement water storage tank of 500 Ltr capacity complete all as specified and directed.
S&F 500 ltr capacity rotational mounded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling unserviceable PVC/ cement water storage tank of 500 Ltr capacity complete all as specified and directed.
S&F in repair vitreous china squatting pan, 'Orrissa' pattern, size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-symphonic pipe etc. with and including setting the trap and pan in cement concrete bedding 1:2:4, Type B-1, using 20 mm graded crushed stone aggregate minimum 150 mm thick all-round and finished just below level of rim of pan to receive the floor finishes including making good floor complete all as specified and directed.
S&F in repair Vitreous china premium/ 1st quality wash down water closet with P or S trap wall hung EWC white/ ivory/off white (closed pattern including all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.
S&F in repair 10 ltr capacity PVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets complete all as specified and directed.
S&F in repair vitreous china wash basin white flat back size 550x400mm excluding taps , waste but including brackets complete all as specified and directed.
S&F in repair stainless steel wall mounted plate rack of size 780mm x760mm x 240mm, thickness of sheet not less than 1.0 mm and weight not less than 7.50 kg of approved design/pattern as approved by Engineer-In-Charge with provision for keeping plate and other crockery, fixed with screw and rawl plugs etc on wall complete all as specified and directed.
S&F in repair 20mm dia aluminium alloy anodised curtain rod decorative fency type with brackets complete all as specified.
S&F in repair 15 mm bore fancy type chromium plated central hole wash basin mixer without popup waste system with 450mm long braided hoses, screwed down high pressure with or without lettered hot and cold screwed for iron pipe complete all as specified and directed.
S&F in repair 15 mm bore fancy type chromium plated wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges, screwed down high pressure with or without lettered hot and cold screwed for iron pipe complete all as specified and directed.
S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for screed bed or bedding layer 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.
M&L for non skid ceramic coloured/ printed tiles 7 to 8 mm thick (square / Rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles complete all as specified and directed.
Disconnecting existing tank exc 250 & n.exc 500 ltrs capacity of any type of tank setting a side (or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks and hoisting if required re-connecting and re-fixing in position complete all as specified and directed.
Disconnecting existing tank exc 500 & n.exc 1000 ltrs capacity of any type of tank setting a side (or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks and hoisting if required re-connecting and re-fixing in position complete all as specified and directed.
S&F in repair 300 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repair 150mm, floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of ceiling including cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of walls including cornices etc by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salt and trading oil and greasy spots and applying one coat of oil bound distemper complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salt and trading oil and greasy spots and applying one coat of colours wash complete all as specified and directed.
M&L for complete removal of existing treatment & applying a layer of wall care putty 2mm thick average on wall surfaces in patches including cornices etc for proper leveling of plaster complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed. Note:- The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours.
M&L for complete removal of existing treatment using grinder/ paint removal machine and applying two coat oil bound distemper on old decorated wall surfaces with airless electric sprayers over one coat of primer applied using airless electric sprayers over one coat of wall care putty thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed. Note:- Application to be done through the authorised applicator of manufacturer.
M&L for complete removal of existing treatment using grinder/paint removal machine and applying two coat exterior emulsion paint (anti dust weather coat) on old plastered wall surface with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coat of wall care putty of 1mm thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed. Note:- Application to be done through the authorised applicator of manufacturer.
M&L for preparation of old decorated plastered or unplastered surfaces of walls/ floor including cornices etc by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salt and trading oil and greasy spots and applying one coats of anti fungal coating emulsion paint of approved colour / tint complete all as specified and directed.
M&L for preparation of old or previously treated steel surfaces of any description, not otherwise description- bed over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old or previously treated wooden surfaces of any described, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. Note:- The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours.
M&L preparation of old painted brick/ concrete/ plastered surfaces of wall of any description over 10 cm girth or width, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. Note:- The contractor shall make necessary arrangement of scaffolding and ensure safety of Labours.
M&L for french polishing two or more coats on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old work till to obtain the mirror finish look of the surface complete all as specified and directed.
M&L for preparation of old or previously treated steel surfaces as in roof paint of any description, not otherwise description- bed over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.
M&L for rendering 15 mm thick faces of brick work or stone masonry or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or stone masonry or concrete surfaces with CM (1:6) finished even and smooth with out using extra cement complete all as specified and directed.
M&L for preparing newly plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of primer(priming the plastered and other surface preparatory to distempering) complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying one coat of cement base paint over a Subsequent coat over a coat of primer (priming plastered and other surfaces with alkali-resistant priming paint) complete all as specified and directed.
M/s JS Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .