ADDN/ALTN AND SPECIAL REPAIR TO JCOs AND ORs MD ACCN IN RCTC AREA AT BARRACKPORE UNDER GE BARRACKPORE

Amount

Taking down cement plaster on brick or stone or concrete surfaces of wall etc , icluding raking out joints , hacking for key, scrubbing down with water etc.

M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cement mortar (1:6) and finished even and smooth without using extra cement.

M&L for 15mm thick rendering in cement mortar (1:4) including WPC on brick work or concrete surface as in wall including finishing the surfaces even and fair all as specified and directed. (Note : WPC will be measured and paid separately).

M&L for Rendering 5mm thick in cement mortar 1:3 to fair face of brick works or concrete surfaces of ceiling surfaces and finished the surface even and smooth without using extra cement. .

M&L for preparing surface of new plastered walls, chajja etc and applying two coats of exterior emulsion paint (weather coat) over a coat of Alkali guard exterior primer as per manufacture instruction, complete all as specified and as directed.

M&L for preparing surface of old painted walls, chajja etc with complete removal of existig treatmet including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and applying two coats of exterior emulsion paint (weather coat) over a coat of Alkali guard exterior primer as per manufacture instruction, complete all as specified and as directed.

M&L for Preparing surface of new plastered wall and applying two coats of oil bound distemper over a coat of Avg 3mm thick wall care putty and alkali resistant primer complete all as specified and as directed

M&L for two coat of oil bound distemper on walls over a coat of alkali resistant primer and average 3mm thick wall care putty including complete removal of existing treatment

M&L for Preparing surface of new plastered ceiling surfaces and applying two coats of Oil bound distemper over a coat of average 3mm thick wall care putty and alkali resistant primer complete all as specified and as directed

M&L for applying two coat of Oil bound distemper on ceiling over a coat of alkali resistant primer and over average 3mm thick wall care putty including complete removal of existing treatment.

Demolition of Reinfoced cement concrete for roofs, floors,(other than ground floors) beams , stair cases, landing,chajjaa and similar suspended work.

M&L for RCC with type B0 (1:2:4) (using 12.5mm graded aggregate ) in Slabs supported on walls , beams and columns in floors , roofs ., landings, balconies , canopies, deck slabs and in shelves and the like .

Use and waste of formwork to the soffits of suspended slabs such as roof slabs , floor slabs , landings and similar work ; not exceeding 200 mm thick ( Horizontal or sloping ) and making flat rough finished surfaces of concrete .

M&L for TMT bars 6 to 8 mm mm dia and over , cut to length , bent to shape required , including cranking , bending spirally for hooping ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips .

Taking down of existing un-serviceable tarfelt / bituminous membrane from roof and parapet of any roof height carefully by cutting chiseling, cleaning the surface by scraping , brooming, brushing etc and removing the rubbish from site complete all as directed by Engr-in-charge.

Demolition of cement concrete in ground floors and pavings (unreinforced) n.exc 15 cm thickness (below or above ground level) all as directed

M&L for 50mm thick PCC type C2 (1:3:6) using 20mm graded crushed stone aggregate as in plinth protection , finishing cement concrete surfaces even & smooth without using extra cement.

Demolition of cement concrete as in roofs, floors (other than ground floors), beams stair cases, landing, chajjas and similar susptnded work .

M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) averaging 50mm thick as in roof padding / levelling course with WPC @ 100ml per 50 Kg cement or as recommended by manufacturer and finishing the surface even and smooth with using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately .

M&L for 20mm thick rendering in CM (1:3) on fair face of brick work mixed with water proofing liquid compound on walls and roof surfaces finished even and smooth using extra cement all as specified & directed. (Note : WPC shall be mixed @ 200 ml / 50 Kg bag of cement or as recommended by manufacturer and the same shall be measured and paid seperately.

M&L for providing, cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, top of chajjas, coping, basement for water tank etc rounded or chamferred on edges finishing the surface even and smooth complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3.5 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( wt not less than 150 gms /sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.4 ltr/Sqm all as specified and as directed. Four course roof treatment consists of as under :- (i) Applying one coat of bituminous primer conforming to IS-3384 @ 0.40 Ltr per sqm. (ii) Laying of APP based membrane as specified thickness and weight. (iii) Applying one coat of bitumin grade 85/25 @ 1.2 Kg/Sqm. (iv) Applying two coat of aluminium paint @ 100ml/sqm each coat.

S&F in repairs for 15 mm Bib taps, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm bore.

S&F in repairs Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle/ Capstan head screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and directed.

S&F in repairs 15mm bore stop valve fancy type chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle/ Capeston head screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges

S&F in repair for Vitreous China wash basin, white, flat back, size 580 X 450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete as in repair all as specified and directed.

S&F in repair 15mm bore n fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F in repairs for brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15mm dia steel pipe or union.

S&F in repair for 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white coloured with integrated 'P' or 'S' trap outlet including 110mm PVC (SWR) WC connector with lip ring, conection to flush pipe and out going pipe and plastic water closet seat cover white coloured closed pattern with flat bottom and PTMT hinging device complete

S&F Jet Spray (with 1.50 mtr tube) fixed to Angular Stop Cock complete all as specified and directed.

S&F in rapair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F LDPE pipes 32mm dia, of pressure rating 6 kg/sqcm fixed to wall or laid in floor etc including necessary pipe fittings and fixing arrangement complete all as specified. Including Taking down PVC pipe of 32mm dia incl fittings in any position.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm.

S&F 32mm in fixed in repair waste coupling of PTMT (half and full threaded)

M&L for 75mm PVC(SWR) dia multy floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4 )

M&L for 75mm PVC(SWR) dia floor trap plain with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4 )

Demolition and breaking up drain pipes PVC or AC pipe set in cement mortar for 100mm bore pipe .

Demolition and breaking up drain pipes PVC or AC pipe set in cement mortar for 75mm bore pipe ..

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls ..

S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls .

S&F for 110mm bore PVC (SWR) bends any radious provided with access door .

S&F for 75mm bore PVC (SWR) bends any radious provided with access door .

S&F for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with access door .

S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with access door .

S&F for 110 mm bore PVC (SWR) bends any radious .

S&F 110 mm PVC (SWR) vent COWL

Taking down PVC pipe of 32mm/50mm dia incl fittings in any position.

S&F LDPE pipes 32mm dia, of pressure rating 6 kg/sqcm fixed to wall or laid in floor etc including necessary pipe fittings and fixing arrangement complete all as specified.

S&F LDPE pipes 50mm dia, of pressure rating 6 kg/sqcm fixed to wall or laid in floor etc including necessary pipe fittings and fixing arrangement complete all as specified.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and removing rubbish off the premises.

M&L 25 mm thick PCC 1:2:4, type B-1 using 20mm graded aggregate as in sub base and leveling course.

M&L screed bed or bedding layer of mortar for laying floor finishes 15mm thick in cement mortar 1:4 and S&F non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) joint free area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry pointed in coloured cement to match coloured tiles.

M&L for 10mm thick plastering (as backing coat) other than fair faces of brick work or concrete surfaces in cement mortar 1:4 and S&F glazed ceramic coloured tiles in vertical surfaces 350X250X6 to 7mm / 450 x 300 x 6 to 7mm thick set and jointed in neat cement slulrry and pointed in white or colour cement to match coloured tiles .

Dismantling of stone slab of any description or thickness in floors, aprons etc.

M&L 20 mm thick granite tile machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the of granite stone including grinding and polishing .

M&L screed bed or bedding layer of mortar for laying floor finishes 20mm thick in cement mortar 1:6 and M&L Machine cut kota stone slab flooring 18-20mm thick as in floor, Trade of steps etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish complete

M&L for 10mm thick plastering (as backing coat) other than fair faces of brick work or concrete surfaces in cement mortar 1:4 and M&L Machine cut kota stone slab flooring 18-20mm thick as in skirting,riser of steps etc over cement plaster laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish complete.

Taking up or down steel tubing and connections for 15mm bore of pipe all as directed.

Re-fixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc complete all as specified and directed.

M&L for 15mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type) all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe all as directed.

M&L for 20 mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type) all as specified and directed.

Re-fixing for 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe all as directed.

M&L for 25mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Disconnecting existing tanks of capacity exc 500 & n exc 1000 litre setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Including Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. complete all as directed.

S&F for 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including fixing cover of tank with its locking arrangement, making hole for inlet, outlet and overflow connection including dismantling / taking down old PVC water tank, ball valve etc complete all as specified and directed.

S&F for 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including fixing cover of tank with its locking arrangement, making hole for inlet, outlet and overflow connection including dismantling / taking down old PVC water tank, ball valve etc complete all as specified and directed.

S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coat ed Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms)

Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each.

Taking down chowkats with shutters (without taking down of shutter from the frames)n. exc 1.50 Sqm each.

Taking down shutter of any description exc 1.00 Sqm and n.exc 2 Sqm each.

Taking down shutter of any description n exc 1sqm each.

Refixing Shutter of any description exc 1 sqm but n exc 2 sqm each

Refixing Shutter of any description n exc1 sqm each

S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain cover fillet colour PVC sheet reinforced with MS square tube for toilet.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed colour PVC sheets for top rail, lock rail and bottom rail on either toside and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in M.S frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement. Supplying and fixing in the frame at site as specified of drawing.

S&F Factory made solid PVC moulded door shutter 30mm thick with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back side with particle board core

S&F 2nd class hard wood plain solid, straight chowkats and frames wrought,frame rebated on the solid,rounded or chamfered,put together with glue pinned at joints

S&F 25 mm thick flush shutters solid core construction with particle board core and plywood face panels both faces covered with decorative face veneer with lipping/ frame to match (magic eye included at main door)complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood plain framed pannelled shutter (three panel) with lock rail and panel of 12mm veneered board particle board of exterior grade with commercial veneering on both faces. The size of rail and style as per IS-1003

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass/gange (with sash bars) edges of forming plain chamfered or rounded fitted with cut and mitred bead for securing glass/ gauged etc size of member of shutter as per Pt-I, Section 8, Clause 8.20 (a)

S&F steel window double shutter ( glazed & gauged ) box type hingeswith steel handle frame, peg stay complete with glazing bar( weighing not less than 44 Kg / Sqm ) dovetailed or welded all as specified and as directed.

S&F steel ventilators with top hung shutter incl hinges, steel peg stay complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for

S&F Framed work such as grills, gratings, Gates , door, windows including pintle hinges,stops, hand made sliding bolts etc., with ends of bars shouldered, welded and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples in window and door as in new door/window.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples in window and door as fixed in repair as old door/window.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane and glazing with oil putty or fixed with beads .

S&F 100 mm long mild steel, cold rolled medium weight butt hinges .

S&F 200 mm aluminum , anodised, barrel tower bolts of extruded section .

S&F 150 mm aluminum Handle Cast type .

S&F 250mm aluminum alloy, anodised , sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed.

S&F 2nd class hardwood small fittins such as brackets of any type, latch and hinge blocks, shapes door and window stops and the like including all necessary labours ; articles n exc 200 Cucm each

S&F 100 mm long hasp and staple, aluminum anodised including bolt to hinge plate and fixed with screws.

M&L for preparation of new wood surface over 10 cm girth or width and apply two coats of synthetic enamel paint over a coat of pink primer

M&L for One coat of synthetic enamel paint after preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth all as specified and directed.

M&L for preparation of new steel surface over 10cm girth or width and apply two coats of synthetic enamel paint over a coat of red oxide primer.

S&F for flat iron as in hold fast,including tarring or coal tar black paint conforming to Fe 410-0 or Fe 310-0.

M&L PCC (1:2:4 ) type B1( using 20 mm graded aggregate ) used as in Brick or concrete wall for fixing of hold fast all as directed.

M&L for preparation of plastered surfaces and applying polymer modified bituminous elastomeric water proof coating for sunken portion of toilet, bathroom and similar portions at any place, location and in any condition all as spd and directed by Engineer-in-Charge(M/s Pidilite proof coat black as per manufacturer's instruction) Make : PIDILITE INDUSTRIES LTD (Dr Fixit Proof coat) or equivalent as approved). The work should have to be carried out by Authorised Applicator of Manufacturer's as approved by GE.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles

M&L for Brick work built in cement mortar (1:6) with well burnt subclass 'B' bricks, straight or curved on plan exc 6m mean radius all as specified and directed.

M&L brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) as in boundary wall, drain etc complete all as specified and directed.

S&F Curtain rod of cromium plated 25 mm dia (heavy) complete all as specified and directed

S&F MS bracket powder coated of best approved quality suitable for fixing 25 mm bore chromium plated (heavy) rod fixed on wall as directed

Supply only Liquid water proofing compound

Excavation in trenches not exc 1.50 m wide and n exc 1.50 mtr in depth; for foundation etc. not exc 10 sqm on plan and getting out in soft/loose soil etc complete all as directed.

M&L for PCC 1:4:8 type D2 using (40 mm graded stone aggregates) for making good cutting portion, mass concrete, filling of foundations etc including necessary use and waste of form work complete all as specified and directed.

M&L Providing plain cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) as in coping or specified.

M&L providing pre-cast cement concrete PCC (1:2:4) type B-1 in cover slab (for manholes etc.) and similar articles with plane and set in cement mortar 1:6 all as directed.

Extra over forming fair finished drain or channel 30 cm inner firth in cement concrete using extra cement , including forms , moulds mitred/stoped ends all as directed.

M&L for concrete bed to drain pipes including packing under and completely surrounding against the sides of pipes after they are laid and tested in PCC 1:4:8 type D2 for 150 mm dia pipe complete all as directed.

S&F 150 mm internal diameter salt glazed stone ware drain pipes class SP1 of IS 651 laid in trenches and jointed as specified of 150 mm all as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr in charge.

Removing surplus excavated material to a distance not exceeding 50 meter above the starting point complete all as specified and directed by Engr in charge.

E/M PORTION Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement for smooth finishing of holes,small patches etc complete all as specified and as directed.

M&L point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly one light point controlled by one way switch and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box,top cover plate, blank plate,MS box,screws,washers and all modular electrical fixtures are to be used same make/brand only and shall be deemed in to included in quoted rate only.)

All as per Item No. 122 one ceiling fan point

All as per Item No. 122 one exhaust fan point

All as per Item No. 122 one 5 pin socket outlet 6 amps on the independent board

All as per Item No. 122 one 5 pin socket outlet 6 amps on the same board

All as per Item No. 122 one bell/buzzer point controlled by one bell push

All as per Item No. 122 one light point controlled by two way switch

All as per Srl item No 122 here-in-before but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm one 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.

S&F modular type switch 10 amps, single pole, 1 way, 1/2 module, 240V, ISI marked complete all as spedified and directed.

S&F modular type switch 10 amps, single pole, 2 way, 1/2 module, 240V, ISI marked complete all as spedified and directed.

S&F modular type bell push switch 6 amps, single pole, 1 way, 1/2 module, 240V, ISI marked complete all as spedified and directed.

S&F modular type switch 16 amps, single pole, 1 way, 1/2 module, 240V, ISI marked complete all as spedified and directed.

S&F modular type socket shuttered type 6 amps, 2/3 pin combined 2 module, 240V, AC, ISI marked complete all as specified and directed.

S&F modular type socket shuttered type 6/16 amps, 6 pin combined 2/3 module, 240V, AC, ISI marked complete all as specified and directed.

S&F red color lighting indication lamp 6 amps, single pole, 240V, AC, 50 HZ suitable for 1/2 module ISI marked complete all as specified and directed.

S&F fan regulator modular type electronic, stepped type (01 to 4/5), 100 to 120 watts, 240V, AC, ISI marked complete all as specified and directed.

S&F call bell AC, 230 Volts single pole , multi music type ISI marked all as specified and as directed.

S&F angle lamp holder, PVC/poly carbonate type with back palte for batten fittings including LED lamp 10 watts complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/polycarbonate, isolated body ISI marked, complete all as specified and directed.

S&F decorative box type 20 watt light fitting, blue coloured end caps, pre-wired, and including providing PVC/Wooden round/square block-02 Nos and connected with LED fitting to ceiling rose and including LED T-8 tubular lamp of 20 Watt extrutruded aluminium /PC body and PC diffuser complete with in built LED driver with removing old unserviceable fitting complete all as specified and directed. Make of light fitting: Crompton Modal No. Crompton Model No. DMLN1LT8-16/ Havells Order code:- REGALBATTENT8UPTO1X22WSSBSWH/ Bajaj Modal BLRB-DB 218 or equivalent make in Philips Make of LED Rod: Crompton Model No. LT8-20-865-2/ Havells code No.PHOTONULTRA1213T8SSTL20WLED865SPC/Bajaj Model No BLRB20CW LED or equivalent make in Philiphs

Taking down carefully by unscrewing fron ceiling rose or outlet boxes of LED tube light fittings of 20 Watt in any height or a place to be kept in safe custudy and refix the same to its own position after cleaning dust particles and connections to be checked complete all as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete allas specified and as directed. Make: Havells/Crompton Greaves/Bajaj

S&F in repair TPN distribution board 4 way acrylic door 415 volts AC, TPN for flush mounting with 100 Amps copper busbar , neutral bar , earth bar and MCB incomer of rating upto 100 Amps , MCB SPN/DP and MCB SP as outgoing and complete connecting cable links with top and bottom removal gland plate with IP 43 DBs protection and including making good the distrubed surfaces to match with existing surface and colour coated complete all as directed and as directed.

Taking down carefully by unscrewing, dismantling and disconnecting all electric connection from TPN DB of 6 way in any height or a place to be kept in safe custudy and refix the same to its own position after cleaning dust particles and connections to be checked complete all as directed.

S&F in repair SPN distribution board 8 way acrylic door 415 volts AC, SPN for flush mounting with 200 Amps copper busbar , neutral bar , earth bar and MCB incomer of rating upto 200 Amps , MCB SPN/DP and MCB SP as outgoing and complete connecting cable links with top and bottom removal gland plate with IP 43 DBs protection and including making good the distrubed surfaces to match with existing surface and colour coated complete all as directed and as directed. Make:- Legrand cat No.5076 21 8 Way / Hager cat ref No.VYS08G (Acrylic door)/L&T Cat ref:-DBSPN008GD or equivalent in any approved make.

S&F MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked complete all as specified and directed. Make:- Legrand/Hager/Havells or as approved make.

S&F MCB SPN 40 to 63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked complete all as specified and directed. Make:- Legrand/Hager/Havells or as approved make.

S&F MCB FP.63 to 100amps 10 KA, 415 volts, 50 Hz, 'B' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed. Make:- Legrand/Hager/Havells or as approved make.

Supply & fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked complete all as specified and directed. Make:- Legrand/Hager/Havells or as approved make.

M&L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 6 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unserviceable submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M&L Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size (45X 45X 45) CM, RCC cover 1:2:4 type B1 of size (45X45X6) CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value complete all as specified and directed.

Taking down of ceiling fan 1200/1400 mm of any make & capacity from any height overhauling of fan motor of any size and removing unserviceable grease, bearings, bushes, split pin, nuts and bolts and cleaning with petrol/ kerosene applying new grease and reassembling complete including replacement of wornout spares with new like split pin nuts and bolts and material and labour for painting to ceiling fan complete body, blades and down rod etc. of any sweep/make/model with two coats of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation surfaces with black paint complete and refixing the same to its original position and proper electric connection to be made and all as specified and as directed.

All as per Srl item No. 153 here-in-before but exhaust fan 300 sweep

Taking down electric meter of any make and capacity from any height and removing from frame and refixing the same including removing unserviceable, nut and bolts and cleaning and reassembling complete including replacement of wornout spares and refixing the same to its original position and proper electric connection to be made and all as specified and as directed.

Cutting the existing surface wall of brick/stone masonary and making round hole at any height suitable for fixing 230 to 300 mm sweep exhaust fan including providing nut,bolt and washers after grouting in PCC and including 3 mm dia 5cm apreature MS jali and proper wooden frame for to avoid insects fix at outer surface of wall and making good the disturbed surface area complete all as specified and directed.

S&F Fresh air fan 250 mm sweep made of study Engineering plastic complete with louvers shutter, 1200 RPM, copper winding , 240 volts AC, 50 Hz as approver colour and connecting of electrical connections and testing complete all as specified and as directed. Make: Havells

M&L for LED Bldg Security light Supply and fixing LED street light fitting 35 watt 230 volt AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F GI bracket pipe of size 25 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on PCC & Steel poles/on wall surfaces and including suitable MS flat iron clamps of 30 x 6 mm thick -02 Nos suitable for fixing any place of poles with nuts, bolts & wahsers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.

MS SHRI B.C. DAS

M/S H.P Singha

ROY CONSTRUCTION