Providing Irrigation Facilities Through Lift Irrigation (Pipeline) to Lands of SC farmers from Manjra River in Srimandal village of Bidar Taluka and Bidar District

Draft Conditions for approval

1 Tenders from Joint ventures are not acceptable.

2 Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.

3 It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPPP on or before the last date and time of bid submission.

4 The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

5 EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

6 Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

7 The transaction fee is non-refundable if you wish to participate.

8 The tenders are invited as per Standard tender Bid Document KW-3

9 All relevant documents as per KW-3 need to be uploaded while submitting bid in general documents provision in KPP Portal portal.

10 Conditional tender will not be considered.

11 Sub - leasing /G.P.A of work is prohibited.

12 The employer reserves the right to accept or reject any or all tenders without assigning any reason.

13 The increase if any in the GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the Authority.

14 The contractor has to furnish additional security deposit for unbalanced tenders in accordance with clause 25.5 of ITT & Clause 44 of the conditions of contract for all works, in addition to 5% performance performance security while executing the Agreement.

15 All materials like steel, cement etc., required for the above work should be procured by the contractor only at his own cost. And these materials will have to be got tested by the competent authority before put to use and certificate shall be submitted.

16 The necessary certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached duly attested to e-tender document. The original certificates/document shall be produced on or before stipulated date and time for verification. Scanned signature of bidder/authorized representative of the bidder shall be attached while up loading bid document.

17 During the execution of works, if any minor mineral are required, contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994(as amended upto date). As per the previlling rules, for any use of minor Minerals, the contractor has to submit the Mineral Despatch permit obtained from Mines and Geology Department. If Mineral Despatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 (as amended from time to time) will be deducted from the contractors bill at the time of payment.

18 The Tenderer shall also disclose if there are any bankruptcy proceedings against him.

19 Uploaded Drawings are tender purpose only.

20 Name, address,telephone,email id and fax numbers of the contractor is to be provided.

21 Each item of BOQ to be read as with all lead and lifts and as per the directions of Engineer in charge.

22 A copy of GST registration certificate to be uploaded.

23 Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos to be uploaded.

24 The defective liability period is one year.

25 If any of the dates mentioned above happens to be a general holiday, the next working day holds good.

26 Incomplete tender documents will be rejected.

27 Corrigendum will be published in web site for all modifications/corrections if any.

28 The intending bidder are advised to visit the site of work before submission of the tenders.

29 If any of the Contractor who have been black listed as per Government order are not eligible to participate in this tender.

30 As per the Karnataka building and other construction workers welfare cess act 1996 1 % of the bill amount will be deducted from the bill.

31 Further information can be had from the office of the Executive Engineer, Minor Irrigation & Ground Water Development Division, Bidar during the office Hours.

32 The contractor should establish quality control laboratory equiped with all the equipments and the materials should be periodically tested and properly documented as per the direction of the Engineer-in-charge of the work.

33 The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing.

34 The contractors whose tenders are rescinded due to delay in executing work/ delayed the work beyond tender period are not eligible for tendering for this work. And will not be considered though they may be lowest.

35 The Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued/counter signed by Superintending Engineer (if the work is done in other states)

36 The Contractor shall quote the rates without adding GST for either materials or works contract (Service). GST payable by the Contractor under this works contract will be paid to the contractor separately as per prevailing orders.

37 The employer reserves the right to accept or reject any or all tenders without assigning any reason.

Technical conditions:

1 The Tenderer shall have valid class - I KPWD License upload registration certificate of original should be produced while opening the tender. Registration Registration Certificate

2 To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. ( 2021-22,2022-23,2023-24 , 2024-25 & 2025-26) achieved in at least Two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 64.11 lakhs. The weightage of 10% will be given per year to bring them to the price level of 2026-27. Financial Status Certificate issued by Chartered Accountant

3 Satisfactorily completed (at least 90% of contract value), as prime contractor, at least one similar work such as Improvement/Construction of LIS value not less than Rs. 32.06 Lakhs. The weightage of 10% will be given per year to bring them to the price level of 2026-27. Past Experience Work Done Certificate

4 c) Executed in any one year, the following minimum quantities of work: 1)EWE (combined excavation and embankment): 3022.69 cum, 2) Pumpset 7.5 HP and Above: 02 Nos 3)Providing and installing pipes : 3420 m Past Experience Work Done Certificate showing quantity of the different item

5 Liquid assets and / or availability of credit facilities of not less than Rs.19.23 Lakhs (Credit lines/letter of credit / certificates from banks for meeting the fund requirement. It should be in prescribed format appended in Bid document. Financial Status Line of credit as prescribed in section 3

6 Section 3, Qualification Information. Capabilities of Vendor Section -3 of Bid Document

7 The tenderer shall give details of works on hand (Present contract commitment) Document Relevant Document

8 All documents including details of EMD are to be mentioned in the technical bid only ( as per KPPP options) Document Relevant Document

9 All documents to be furnished are to be attested by the officer of not below the rank of Executive Engineer or by Notary. Documents All Documents must be Notarised

All items are with all leads and lifts including loading and unloading as per the direction of the Engineer-in-charge of the work.

1 Contractors Registration Certificate

2 Annual Turnover Certificate issued by the C.A

3 Work Done Certificate for executed quantity

4 Similar Nature Of work done Certificate issued not below the rank of E.E

5 Line Of Credit

6 Works on hand Present contract commitment

7 Section 3, Qualification Information.

8 Assess available tender capacity

Providing Irrigation Facilities through Lift Irrigation (Pipeline) to Lands of SC Farmers from Manjra River in Srimandal Village of Bidar Taluka & District

Sl. No. Description of Item Unit Quantity Rate Amount (Rs.) Milestone-1 (for 1st 3-months) Milestone-2 (for 2nd 3-months) Milestone-3 (for 3rd 3-months) Remarks

1st month 2nd month 3rd month 1st month 2nd month 3rd month 1st month 2nd month 3rd month

Qty Amount Qty Amount Qty Amount Qty Amount Qty Amount Qty Amount Qty Amount Qty Amount Qty Amount

1 Supply and delivery of 10 HP, size 80x65 Head 34.50M, Discharge 840 LPM centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments (CSR 2023-24 Vol-5 I.No. 13.40.9) No. 2.00 39504.150 79008.30 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 2.00 79008 0.00 0 0

2 Supply, delivery, erection and commissioning at site lighting distribution board suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments (CSR 2023-24 Vol-5 I.No. 13.44) No. 2.00 3675.000 7350.00 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 2.00 7350 0.00 0 0

3 Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING: 1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. Direct Online Starter (DOL) of Star-delta (SD) Starter suitable for 6 to 15 HP pumps 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 No. for outdoor type (CSR 2023-24 Vol-5 I.No. 13.24.3) No. 2.00 18375.000 36750.00 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 2.00 36750 0.00 0 0

4 Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets (CSR 2023-24 Vol-5 I.No. 13.25) KVAR 10.00 577.500 5775.00 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 10.00 5775 0.00 0 0

5 Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box (CSR 2023-24 Vol-5 I.No. 13.26) / 3 pole 2.00 1207.500 2415.00 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 2.00 2415 0.00 0 0

6 Supply, delivery, erection and commissioning at site ELCB suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments (CSR 2023-24 Vol-5 I.No. 13.45) (CSR 2023-24 Vol-5 I.No. 13.45) No. 2.00 4322.850 8645.70 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 2.00 8646 0.00 0 0

7 Labour charges for providing connection using 3½ x 16 sqmm insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. (CSR 2023-24 Vol-5 I.No. 13.35.5) m 60.00 283.500 17010.00 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 60.00 17010 0.00 0 0.00 0 0

8 Supply and delivery at site Brand new best make 1x3x6 Sqm PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments (CSR 2023-24 Vol-5 I.No. 13.22.4) m 200.00 194.250 38850.00 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 200.00 38850 0.00 0 0.00 0 0

9 Providing, laying and jointing HDPE Grade PE80-PN6.0, 140mm dia pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete (CSR 2023-24 Vol-5 I.No. 9.1.6) m 200.00 718.200 143640.00 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 200.00 143640 0.00 0 0.00 0 0

10 Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work (CSR 2023-24 Vol-5 I.No. 13.33) Job 2.00 1522.500 3045.00 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 2.00 3045 0.00 0 0

11 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work (CSR 2023-24 Vol-5 I.No. 13.32) Job 2.00 6825.000 13650.00 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 2.00 13650 0.00 0 0

12 Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. (CSR 2023-24 Vol-5 I.No. 13.39) Job 2.00 3937.500 7875.00 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 2.00 7875 0.00 0 0.00 0 0

13 Earth work excavation by manual means in all kinds of soils depth upto 1.5 m for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work (CSR 2023-24 Vol-1 I.No. 1.4.1) Cum 1923.75 254.100 488824.88 400.00 101640 400.00 101640 400.00 101640 400.00 101640 400.00 101640 0.00 0 0.00 0 83.50 21217 0.00 0 (40592)

14 Providing and installing at site of work 160 mm dia 10 Kg/m² PVC pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete (CSR 2023-24 Vol-5 I.No. 10.14.27) m 3200.00 1247.400 3991680.00 600.00 748440 600.00 748440 700.00 873180 700.00 873180 700.00 873180 0.00 0 0.00 0 150.00 187110 0.00 0 (311850)

15 Providing and installing at site of work 110 mm dia 8 Kg/m2 P.V.C. pipes (weight of pipe – 1.894 kg) including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete (CSR 2023-24 Vol-5 I.No. 10.14.18) m 570.00 549.150 313015.50 100.00 54915 100.00 54915 100.00 54915 100.00 54915 100.00 54915 0.00 0 0.00 0 70.00 38441 0.00 0 0

16 Providing and installing at site of work 90 mm dia (weight of pipe – 1.313 kg) 8 Kg/m2 P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete (CSR 2023-24 Vol-5 I.No. 10.14.17) m 505.00 384.300 194071.50 100.00 38430 100.00 38430 100.00 38430 100.00 38430 100.00 38430 0.00 0 0.00 0 110.00 42273 0.00 0 (40352)

17 Refilling available earth around trenches/ pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications (CSR 2023-24 Vol-1 I.No. 1.10) Cum 1850.72 168.000 310920.96 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 500.00 84000 800.00 134400 704.82 118410 0.00 0 (25889)

18 Providing, laying and fixing of light Duty 100 mm dia GI pipes conforming to IS 1239: 1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning (CSR 2023-24 Vol-5 I.No. 11.1.9) m 10.00 1022.700 10227.00 0.00 0 0.00 0 0.00 0 10.00 10227 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0

19 Supply and delivery at site wrought middle steel (galvanized) 150 mm dia GI bend confirming to IS 1239-II, 1991 with latest amendments if any (CSR 2023-24 Vol-5 I.No. 11.8.11) No. 3.00 760.200 2280.60 0.00 0 0.00 0 0.00 0 3.00 2281 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0

20 Supply and delivery at site wrought middle steel (galvanized) 150 mm dia GI union confirming to IS 1239-II, 1991 with latest amendments if any (CSR 2023-24 Vol-5 I.No. 11.12.11) No. 2.00 822.150 1644.30 0.00 0 0.00 0 0.00 0 2.00 1644 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0

21 Supply and delivery at site of brand new best make 80 mm non – return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (CSR 2023-24 Vol-5 I.No. 13.25.3) No. 2.00 1837.500 3675.00 0.00 0 0.00 0 0.00 0 2.00 3675 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0

22 Providing and fixing 80 mm dia kinetic air valve of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845/ EN 1074-4. Body and bonnet of DI conforming to IS-1865 of grade GGG-40/50, seals are made of approved EPDM, SS 304 float, guide and internals. Flange drilling according to IS-1538 with appurtenances complete. Body and bonnet shall be coated with electrostatically applied epoxy powder coating with a coating thickness of 250 micron both inside and outside etc. complete For K Air Valves of 80mm dia. (CSR 2023-24 Vol-5 I.No. 2.33.1) No. 6.00 27660.150 165960.90 0.00 0 0.00 0 0.00 0 6.00 165961 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0

23 Supply and delivery at site GM (copper alloy) 80 mm dia gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark (CSR 2023-24 Vol-5 I.No. 11.15.8) No. 10.00 1997.100 19971.00 0.00 0 0.00 0 0.00 0 10.00 19971 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0

24 Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (CSR 2023-24 Vol-1 I.No. 1.15.1) Cum 3.89 381.150 1482.67 0.00 0 0.00 0 0.00 0 0.00 0 3.89 1483 0.00 0 0.00 0 0.00 0 0.00 0 0

25 Providing and laying in position cement concrete mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications (CSR 2023-24 Vol-1 I.No. I.No. 2.1.3) Cum 0.97 6213.900 6027.48 0.00 0 0.00 0 0.00 0 0.00 0 0.97 6027 0.00 0 0.00 0 0.00 0 0.00 0 0

26 Providing random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level with cement mortar 1:6 (1 cement: 6 coarse sand) (CSR 2023-24 Vol-2 I.No. 5.1.1) Cum 0.77 5864.250 4515.47 0.00 0 0.00 0 0.00 0 0.00 0 0.77 4515 0.00 0 0.00 0 0.00 0 0.00 0 0

27 Providing coursed rubble masonry (first sort) with hard stone in foundation and plinth with cement mortar 1:6 (1 cement: 6 coarse sand) (CSR 2023-24 Vol-2 I.No. 5.2) Cum 1.76 6923.700 12185.71 0.00 0 0.00 0 0.00 0 0.00 0 1.76 12186 0.00 0 0.00 0 0.00 0 0.00 0 0

28 Providing and laying in position cement concrete mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications (CSR 2023-24 Vol-1 I.No. I.No. 2.1.3) Cum 0.39 6213.900 2423.42 0.00 0 0.00 0 0.00 0 0.00 0 0.39 2423 0.00 0 0.00 0 0.00 0 0.00 0 0

29 RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings – Internal dia Mtr. 1200 mm & height of 2.5 Mtr. With Wall thickness 65mm etc. complete (CSR 2023-24 Vol-5 I.No. 10.6) No. 2.00 17221.050 34442.10 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 2.00 34442 0.00 0 0.00 0 0.00 0 0

30 Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc., complete as directed by the Engineer in charge of the work (CSR 2023-24 Vol-5 I.No. 10.7) No. 2.00 1976.100 3952.20 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 2.00 3952 0.00 0 0.00 0 0.00 0 0

31 Providing 20 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (CSR 2023-24 Vol-2 I.No. 8.3.2) Sqm 6.16 347.550 2140.91 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 6.16 2141 0.00 0 0.00 0 0.00 0 (0)

32 HT Line: Supplying and erection of PSCC Pole-8 Mtr Long, 200 Kg WL including digging of pit, transportation of pole etc. complete (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 (ESCOM SR 2023-24 I.No.1.05) No. 5.00 6640.400 33202.00 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 5.00 30119 0.00 0 3083

33 Supplying and erection of RCC Pole-8 Mtr Long, 115 Kg WL including digging of pit, transportation of pole etc. complete (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 (ESCOM SR 2023-24 I.No.1.03) No. 1.00 8277.200 8277.20 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 1.00 7525 0.00 0 752

34 Providing & fixing of 11 kV, Horizontal Cross Arm-Mild Steel (MS) (Dwg No. BESCOM/ GM/ QS&S/ 04 Dtd 24.11.2018) (ESCOM SR 2023-24 I.No. 2.01, 2.11 & 5.03) No. 7.00 910.200 6371.40 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 7.00 5292 0.00 0 1079

36 Supply and fixing at site guy set with 2-No. of No. 15 strain insulator & concreting material galvanized steel wire with turn buckle and anchoring with all accessories etc. complete and as directed by the Engineer in charge (ESCOM SR 2025-26 I.No. 5.12, 5.09, 8.01, 5.11, 6.08, 1.7.2 & 5.10) No. 6.00 2155.450 12932.70 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 6.00 10232 0.00 0 2701

42 Supplying and erection of RCC Pole-9 Mtr Long, 145 Kg WL including digging of pit, transportation of pole etc. complete (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 (ESCOM SR 2025-26 I.No.1.01, 2.02, 1.1.2, 17.01.03 & 17.05.1) No. 2.00 10548.700 21097.40 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 1.00 133100 (112003)

43 Double Pole TC Set for erection of Transformer on RCC/ PSCC 9 Mtr Long Poles as per IS-1977 for 25/63/100 kVA 4/5 Star Rated Transformer on PSCC Pole-9 Mtr Long, 300 Kg WL-MS (Dwg No. BESCOM/ GM/ QS&S/ 62 Dtd 24.11.2018) including fixintg of structure material, erection of poles, etc. complete for mounting TC (ESCOM SR 2025-26 I.No. 21.01 & 3.01). Set 1.00 23338.150 23338.15 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 2.00 19574 3764

44 Providing and fixing H-frame set for fixing 11 kV, 200 Amps, single break GOS (for DP structure for providing new GOS for sectionalization-MS including labour charges (ESCOM SR 2025-26 P.No. 16 I.No. 24.06 & 2.09). Set 1.00 4544.400 4544.40 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 3.00 15463 (10919)

47 Supply and fixing at site guy set with 2-No. of No. 15 strain insulator & concreting material galvanized steel wire with turn buckle and anchoring with all accessories etc. complete and as directed by the Engineer in charge (ESCOM SR 2025-26 I.No. 5.12, 5.09, 8.01, 5.11, 6.08, 1.7.2 & 5.10) Set 4.00 2155.450 8621.80 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 4.00 8090 532

48 Providing GI Grounding pipe, B-Class, 42 mm dia, 2.5 m long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg for transformer grounding (ESCOM SR 2025-26 P.No. 93 I.No. 25a, 51.01, 8.05 & 8.06) No. 3.00 5330.900 15992.70 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 3.00 261 15731

52 Providing & fixing of 1.1 KV Class HR (Heat Resistant) 50 sqmm PVC Insulated & unsheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010 (ESCOM SR 2025-26 I.No. 49.04) No. 40.00 129.860 5194.40 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 1.00 2498 2696

54 Providing 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018) (ESCOM SR 2025-26 I.No. 20.01 & 13.01) Set/ 3 No. 3.00 1412.150 4236.45 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 3.00 3023 1214

55 Supply of 3-No. 9kV, 5kA lightening arrestor, metal oxide ceramic type with ground disconnector as per Dwg No. BESCOM/ GM/ QS&S/ 26 dt: 24.10.2007) (ESCOM SR 2025-26 I.No. 19.01 & 13.06). No. 3.00 2126.170 6378.51 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 1.00 4330 2048

57 DTC: Supply and erection of 11KV/ 433 V, 25 KVA Aluminium Wdg (BEE-4 Star Rated) new Distribution Transformer on Transformer structure including loading with all accessories etc. complete and as directed by the Engineer in charge (ESCOM SR 2025-26 I.No. 12.01, 8.01, 18.01 & 18.06). No. 1.00 120572.900 120572.90 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 1.00 3566 117007

58 CT Ratio 50/5A, 1.0 acurracy class for LT current transformer, 3.75 VA, ring type as per IS-2705 Part-1&2 (ESCOM SR 2025-26 I.No. 56.03 & 15.02) No. 3.00 1920.650 5761.95 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 2.00 13763 (8001)

59 Providing and fixing LT AC 3-Phase 4-Wire CT Operated, 5 Amps Smart Energy Meter of Class 0.5s Accuracy with swappable modules with an option for swapping GPRS and RF communication system as per IS 16444 Part 2 with latest amendments (Cyber Security Compliant/ Firmware upgradability/ Smart Grid interoperable) without polycarbonate box (ESCOM SR 2025-26 I.No. 53.05) No. 1.00 9463.200 9463.20 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 4.00 1886 7577

60 CT Ratio 100/5 for 50/63 kVA DTC For Distribution Transformer Centre (DTC) MS Box for housing the ETV Meter 3 Phase 4 Wire 5 Amps, with associated LT CT 0.5 Accuracy Class, ring type, with wiring Clamps, B&N and all other accessories required (ESCOM SR 2025-26 I.No. 64.02 & CDS-39) Set 1.00 8434.700 8434.70 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0 16.00 454 7981

62 Supplying and erection of RCC Pole-8 Mtr Long, 115 Kg WL including digging of pit, transportation of pole etc. complete (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 (ESCOM SR 2025-26 I.No. 1.03, 1.2.2, 17.01.3, 17.05.1 & 2.01) No. 2.00 8277.200 16554.40

63 Supply and delivery at site MS LT-4 pin cross arms with clamps, bolts, nuts & washers with braces with all accessories etc. complete and as directed by the Engineer in charge (BESCOM-II P.No. 90 I.No. 13a) No. 4.00 589.150 2356.60

64 Supply and fixing at site guy set with 2-No. of No. 15 strain insulator & concreting material galvanized steel wire with turn buckle and anchoring with all accessories etc. complete and as directed by the Engineer in charge (ESCOM SR 2025-26 I.No. 5.12, 5.09, 8.01, 5.11, 6.08, 1.7.2 & 5.10) Set 1.00 2167.850 2167.85

65 Providing 1.1 kV Ceramic Pin Insulator (Shell Only) (ESCOM SR 2025-26 I.No. 6.03) No. 4.00 31.200 124.80

66 Providing 1.1 kV GI pin for 1.1 kV ceramic shell insulator (ESCOM SR 2025-26 I.No. 6.04) No. 4.00 34.800 139.20

67 Providing No. 8 strain insulator (ESCOM SR 2025-26 I.No. 6.07) No. 16.00 27.600 441.60

68 Supply and stringing Weasel ACSR conductors as per IS-398 (Part-2/ 1996) with H2/H4 grade aluminium conductor having purity of 99.7% and 0.028264 Ohm mm²/m conductor resistivity (ESCOM SR 2025-26 I.No. 7.01 & 6.01) Mtr 0.40 50769.650 20307.86

Mile Stone Financial 2955015.00 2491258.76 1252247.55

Mile stone Physical 44.00% 37.00% 19.00%

Mile Stone Financial 2955015.00 2491258.76 1252247.55

The liquidated damages

For Milestone 1: Rs. 2955.02 per day

For Milestone 2: Rs. 5446.27 per day

For Milestone 3: Rs. 6698.52 per day

Earthwork excavation 3778.36 cum 3022.688

pumpset 2.00 No 1.6

Providing and installing pipes 4275.00 m 3420