REPAIR TO STEEL AND WOODEN FURNITURE AT CERTAIN UNIT OF NAGTALAO UNDER AGE I NAGTALAO

Amount

BED PLY WOOD TOP (Single) SIZE 1930*930*325mm T.P AS PER DRAWING (DRDO. P- NO 43) M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) Head board complete.

(b) Foot board complete.

(c ) First class hard wood legs.

(d) Second Class hard wood long Rails.

(e) Second class hard wood short Rail.

(f) 12 mm thick ply wood top BWR grade,typee 'A' both side commercial.

CHAIR WRITING - (FD-280) M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 1st class hard wood front legs.

(b) 1st class hard wood rear legs.

(c ) 1st class hard wood front/rear/side rails of chair seat.

(d) 1st class hard wood back rest

(e) 1sr class hard wood Bottom stiffener

(f) 1st class hard wood Arm rest.

PEG TABLE ( FD-384, 277) M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings.(a) Table Top of 18 mm thick prelaminated paticle board with one side Teak Veneer finish and other side balancing white, including teak wood edging on all sides complete.

(b) 1st class hard wood Legs.

(c ) 1st class hard wood Top rails.

TABLE WRITING (FD No -275) M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) Table Top of 18 mm thick prelaminated particle boad with one side Teak Veneer finish and other side balancing white, including teak wood edging on all sides complete.

(b) 1t class hard wood Legs

(c ) 1st class hard wood Front/rear/side rails.

(d) Drawer made of 12 mm thick particle board one side teak veneer and other side commercial, 6mm ply wood for bottom including teak wood edging complete.

(e) 40 mm Knob with screw.

TABLE CENTRE (FD-274) M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) Table Top of 18 mm thick prelaminated particle board with one side Teak Veneer finish and other side balancing white, including teak wood edging on all sides complete.

(b) 1st class hard wood Legs.

(c ) 1st class hard wood Top rails.

STOOL DRESSING - (FD-374 & 282). M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 1st class hard wood Legs

(b) 1st class hard wood Top rail

(c ) 1st class hard wood Stiffener

DRESSNG GENTS WITH MIRROR : (FD-379) M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) Teak wood Mirror Frame.

(b) Looking Mirror 6 mm thick copper electro plated of size 380 x 760 mm (Make-ATUL,SWASTIC & SAINT-GOBBIN)

(c ) 12 mm thick teak wood for sides and face of Drawer.

(d ) 6 mm thick ply wood in bottom of drawer and chromium plated knob.

CHAIR EASY WITH CUSHION : (FD-358) M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) Seat shall be 75/50 th Respectively Synthetic Foam of 28 Density Fixed Over Wooden Frame & It Shall Be Rexine of Approved Shape Texture & Quality. Make-kurl on,sleep well,Featherfoam.

(b) - do- all as per item 8 (a) above but for seat frame back.

(c ) Armrest cushion with rexine

DRESSING LADIES WITH MIRROR (FD-32,251) M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) Teak wood Mirror Frame.

(b) Lokking Mirror 6mm thick copper electro plated of size 365 x 1226 mm (Make-ATUL,SWASTIC & SAINT-GOBBIN)

(c ) 12 mm thick teak wood for sides, face of drawer.

(d ) 6 mm thick plywood in bottom of drawer and chromium plated knob complete.

TABLE DINING 04 PERS : (FD- 273). M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 1st class hard wood Legs.

(b) 1st class hard wood Long rails .

(c) 1st Class hard wood Short Rails.

(d) 1st class hard wood 100 x 25 Stiffener

(e) Table Top of 19 mm thick prelaminated particle board with one side Teak Veneer finish and other side balancing white, including teak wood edging on all sides complete. (Pre laminated partical board make- KITPLY,GREENLAM & ECOBOARD)

(f) Nylon buffers

CHAIR DINING OFFRS : (FD/MAP-II/04 ) M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 75 mm thick Foam with 40 density, covered with tapestry cloth approved by AGE (I) Nagtalao, FOAM Make-Sleep well,kurl on & Cool Foam fixed on 12 mm thick ply as shown. Tapestry cloth not be less than Rs.200/-per metre.

(b) 1st class hard wood legs size (35x50mm)

(c) 1st class hard wood stiffener size(20x25mm)

(d) 1st class hard wood strips size (30x15mm) fix as per drawing.

(e) Nylon buffers

TABLE DINING 06 PERS : (FD- 273) M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 1st class hard wood Legs

(b) 1st class hard wood Long rails

(c) 1st class hard wood 100 x 25 Stiffener

(d) 1st Class hard wood Short Rails

(e) Table Top of 19 mm thick prelaminated particle board with one side Teak Veneer finish and other side balancing white, including teak wood edging on all sides complete. (Pre laminated partical board make- KITPLY,GREENLAM & ECOBOARD)

(f) Nylon buffers

TABLE WITH DRAWER (FD- 283). M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 1st class hard wood Legs

(b) 1st class hard wood bottom rail

(c) 6 mm thick plywood in bottom of drawer and chromium plated knob complete.

(d) Table Top of 19 mm thick prelaminated particle board with one side Teak Veneer finish and other side balancing white, including teak wood edging on all sides complete. (Pre laminated partical board make- KITPLY,GREENLAM & ECOBOARD)

TEAPOY : (FD-384, 277) M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) Table Top of 18 mm thick prelaminated particle board with side Teak Veneer finish and other side balancing white, including teak wood edging on all sides complete. (Pre laminated partical board make- KITPLY,GREENLAM & ECOBOARD)

(b) 1st class hard wood Legs.

(c ) 1st class hard wood Top rails.

(d) 1st class hard wood Stiffener

CHAIR DINING FD-279. M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 1st class hard wood Front legs

(b) 1st class hard wood Rear legs.

(c) 1st class hard wood Back Stiffener

(d) 1st class hard wood Bootom stiffener

(e) 1st class hard wood Seat front/rear/side rail

SOFA SET SINGLE SEATER WITH CUSHION :FD-373. M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) Cushions for sofa single seater Bottom and back size 525*550*100mm thick with density covered with tapestry cloth cushion approved by AGE(I) Nagtalao, Foam Make-Sleep well curlon & Dunlopillo.

SOFA SET THREE SEATER WITH CUSHION : FD-373. M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings:- (a) Cushions for sofa Tripple seater Bottom and back size 525*550*100mm thick with density covered with tapestry cloth cushion approved by AGE(I) Nagtalao, Foam Make-Sleep well curlon & Dunlopillo.

CANNING M & L for replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings:- (a) 2 mm wide plastic cane best quality woven in Godrej pattern, 3.5mm wide cane for perimeter work complete (measurment will be taken from hole to hole of canning area )

TABLE BED SIDE : FD/E6/MAP/15R. M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings. (a) 12mm TH commercial ply BWR grade for back and side of drawer, including 6mm Th commercial ply for base and chromium plated knob. Fix as per drawing.(ply make- KITPLY,GREEN PLY & CENTURY)

(b) 18mm TH pre laminated partical board top with PVC edging Fixed to frame (25mm projection on 3 sides) (Pre laminated partical board make- KITPLY,GREENLAM & ECOBOARD)

20. CHAIR CB STEEL WITH ARMS Drg No FD-75. M & L for replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings:- (a) Seat frame bottom made of 2nd class hard wood, with canning 2mm panted black.

(b) Ist class hard woood arm rest including painting in black colour, including necessasry welding work if required.

CHAIR WRITING STEEL (FD-360) M & L for Replacement of the following unserviceable/defective parts with new parts all as specified and shown on drawings :- (a) Seat frame to be 75 mm thick synthtic foam of 28 density fixed wooden frame with leatherised rexine of approved texture and quality

(b) Back frame to be 50 mm thick synthtic foam of 28 density fixed wooden frame with leatherised rexine of approved texture and quality

(c ) Arm rest with cushion and reckgeen, including necessasry welding work if required.

22. M & L for polishing to the following furniture articles with a coat of French polish including preparation of wooden surfaces complete all as specified and directed:- (a) Bed ply wood top

(b) Chair writing

(c) Chair dining

(d) Peg Table

(e) Table writing

(f) Table centre

(g) Stool dressing

(h) Table dressing gents with mirror

(i) Table dresing ladies with mirror

(j ) Table dining 4 Pers.

(k) Chair Easy with cushion

(l) Hat Stand

(m) Chair dining offrs

(n) Table dining 6 pers

(o) Table with drawer

(p) Teapoy

(q) Chair easy wooden

(r) Chair writing with cushion back

(s) Chair writing without cushion back

(t) Chair dining cushion

(u) Chair dining cane

(v) Table bed side

M/s B. S. Solanki Builders