Providing Fire Fighting System for Boys Hostel at Vankal, Tal.Mangrol, Dist.Surat.

Name of Work :- Providing Fire Fighting System for Boys Hostel at Vankal, Tal.Mangrol, Dist.Surat.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

1 Supply. installation, testing & commissioning of ISI approved electrical 2.00 Nos. 98424.50

motor driven jockey pump set having 10.8 m3/hr. @ 70m head. The pump

unit shall be a horizontally direct mounted motor. Unit shall comprise the

following minimum requirements: a) Pump, b) Electric motor IE2, c)

Foundation bolts, d) Mating flanges with gasket and fasteners, e) Discharge

gauges, etc. complete in all respect, with labour.

2 Supply, installation, testing & commissioning of Priming tank, HDPE type, 2.00 Nos. 25674.20

1000 litres, with necessary piping 100 mm size, G.I pipe for priming the

pumps, pipe of with butterfly valves for isolation, Water Filling to priming

tank by piping min. 50 mm size, with all complete.

3 Supply, installation, testing & commissioning of Manifold (surge vessel)for 2.00 Nos. 55635.85

fire hydrant system, min. 300 mm diameter, made from M.S plate, hydro

tested to 15 kg./cm2. with ball valves, header with couplings for fitting

pressure switches, pressure gauges etc.with necessary isolation valves with

4 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 20.00 Mtr. 397.94

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589,

for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS:

part-II, Heavy class for size 150 mm dia. & below & IS: 3589, for size

mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe

hangers, etc. Hydrostatic testing for 2 hour's at 150% of the system pressure,

hook-up etc. Painting for piping, fittings & structural pipe support, shall be

two coat of zinc primer and two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge with all complete 25 mm dia.

5 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 20.00 Mtr. 641.35

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589,

for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS:

part-II, Heavy class for size 150 mm dia. & below & IS: 3589, for size

mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe

hangers, etc. Hydrostatic testing for 2 hour's at 150% of the system pressure,

hook-up etc. Painting for piping, fittings & structural pipe support, shall be

two coat of zinc primer and two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge with all complete 50 mm dia.

6 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 30.00 Mtr. 1176.65

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589,

for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS:

part-II, Heavy class for size 150 mm dia. & below & IS: 3589, for size

mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe

hangers, etc. Hydrostatic testing for 2 hour's at 150% of the system pressure,

hook-up etc. Painting for piping, fittings & structural pipe support, shall be

two coat of zinc primer and two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge with all complete. 80 mm dia.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

7 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 400.00 Mtr. 1689.73

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589,

for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS:

part-II, Heavy class for size 150 mm dia. & below & IS: 3589, for size

mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe

hangers, etc. Hydrostatic testing for 2 hour's at 150% of the system pressure,

hook-up etc. Painting for piping, fittings & structural pipe support, shall be

two coat of zinc primer and two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge with all complete. 100 mm dia.

8 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 20.00 Mtr. 2525.00

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589,

for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS:

part-II, Heavy class for size 150 mm dia. & below & IS: 3589, for size

mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe

hangers, etc. Hydrostatic testing for 2 hour's at 150% of the system pressure,

hook-up etc. Painting for piping, fittings & structural pipe support, shall be

two coat of zinc primer and two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge with all complete 150 mm dia.

9 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 10.00 Mtr. 3423.90

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589,

for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS:

part-II, Heavy class for size 150 mm dia. & below & IS: 3589, for size

mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe

hangers, etc. Hydrostatic testing for 2 hour's at 150% of the system pressure,

hook-up etc. Painting for piping, fittings & structural pipe support, shall be

two coat of zinc primer and two coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge with all complete 200 mm dia.

10 Supply, installtion, testing & commissioing of Underground GI (ERW) 30.00 Mtr. 2020.00

piping conforming to IS:1239, part-I, Heavy class ('C' class) up to 150 mm

dia. and IS:3589 Heavy class ('C' class), for 200 mm dia. & above, min.

6.35mm thickness including Heavy class fittings, anti-corrosive tape of size

150 mm wide x 4 mm thick, wrapping & coating with 13KV holiday testing

. Rates shall include sand bedding of 75mm dia all around, backfilling of the

excavated including installation of heavy pipe fitting's, flanges, etc. 10 % of

all the welded joints shall be done radiographically tested and 50% of the

joints radiographed shall be the "Field Joints". Hydrostatic testing for

hours at 150% of the system pressure, hook-up etc., complete with all

accessories as per approved drawings, specicification and direction of the

Engineer-in-Charge, with all complete. (Road Crossing) 100 mm dia.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

11 Supply, installtion, testing & commissioing of Underground GI (ERW) 15.00 Mtr. 3045.15

piping conforming to IS:1239, part-I, Heavy class ('C' class) up to 150 mm

dia. and IS:3589 Heavy class ('C' class), for 200 mm dia. & above, min.

6.35mm thickness including Heavy class fittings, anti-corrosive tape of size

150 mm wide x 4 mm thick, wrapping & coating with 13KV holiday testing

. Rates shall include sand bedding of 75mm dia all around, backfilling of the

excavated including installation of heavy pipe fitting's, flanges, etc. 10 % of

all the welded joints shall be done radiographically tested and 50% of the

joints radiographed shall be the "Field Joints". Hydrostatic testing for

hours at 150% of the system pressure, hook-up etc., complete with all

accessories as per approved drawings, specicification and direction of the

Engineer-in-Charge, with all complete. (Road Crossing) 150 mm dia.

12 Design, Supply and installation of Safety Signage made of Zinc Sulphilde 9000.00 Sq. 9.39

based glow in dark, Rigid sheet with High Luminous property enclosed in a inch

transperent weather proof UV stabilized plastic pasted on 3 mm thick clear

acrylic sheet such as EXITS, EMERGENCY EXIT, DO NOT USE LIFT

DURING FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE EXIT,

FIRE ALARM CALL POINT, FIRE HOSE REEL, FIRE HYDRANT

13 Supply, installation, testing & commissioning of pressure switch. (Range 0 8.00 Nos. 2822.95

14 Supply, installation, testing & commissioning of 150 mm dia. dial Burdon 12.00 Nos. 2737.10

Type Glycerine Filled pressure gauge with isolation ball valve arrangements

with necessary isolation valves with all complete.( Range 0 to 15 kg/cm2)

15 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly 8.00 Nos. 2010.91

valve according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. &

below Lever operated and above 150 mm dia. Gear operated complete with

mating flanges /ANSI class # 150 with bolts & nuts washers, rubber gaskets

3 mm thick, etc. with all complete. 50 mm dia.

16 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly 4.00 Nos. 2567.42

valve according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. &

below Lever operated and above 150 mm dia. Gear operated complete with

mating flanges /ANSI class # 150 with bolts & nuts washers, rubber gaskets

3 mm thick, etc. with all complete. 80 mm dia.

17 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly 10.00 Nos. 3123.93

valve according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. &

below Lever operated and above 150 mm dia. Gear operated complete with

mating flanges /ANSI class # 150 with bolts & nuts washers, rubber gaskets

3 mm thick, etc., with all complete. 100 mm dia.

18 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly 4.00 Nos. 4493.49

valve according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. &

below Lever operated and above 150 mm dia. Gear operated complete with

mating flanges /ANSI class # 150 with bolts & nuts washers, rubber gaskets

3 mm thick, etc., with all complete. 150 mm dia.

19 Supply, installation, testing & commissioning of Cast iron body Dual Plate 4.00 Nos. 1540.25

Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete Accessories 50 mm dia.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

20 Supply, installation, testing & commissioning of Cast iron body Dual Plate 2.00 Nos. 2225.03

Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete Accessories 80 mm dia.

21 Supply, installation, testing & commissioning of Cast iron body Dual Plate 4.00 Nos. 3166.35

Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete Accessories 100 mm dia.

22 Supply, installation, testing & commissioning of Cast iron body Dual Plate 2.00 Nos. 5819.62

Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete Accessories 150 mm dia.

23 Supply, installation, testing & commissioning of SG iron body SinglePlate 2.00 Nos. 1111.00

Wafer Type NRV conf. to ASTMA 536, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete. Accessories 50 mm dia.

24 Supply, installation, testing & commissioning of SG iron body SinglePlate 2.00 Nos. 1454.40

Wafer Type NRV conf. to ASTMA 536, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete. Accessories 80 mm dia.

25 Supply, installation, testing & commissioning of SG iron body SinglePlate 2.00 Nos. 1796.79

Wafer Type NRV conf. to ASTMA 536, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete. Accessories 100 mm dia.

26 Supply, installation, testing & commissioning of Y Type Strainer complete 2.00 Nos. 5563.08

with mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete accessories. 80 mm dia.

27 Supply, installation, testing & commissioning of Y Type Strainer complete 2.00 Nos. 7272.00

with mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete accessories. 100 mm dia.

28 Supply, installation, testing & commissioning of Y Type Strainer complete 4.00 Nos. 11554.40

with mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete accessories. 150 mm dia.

29 Supply, installing, testing and commissioning of Normax make CI heavy 2.00 Nos. 4193.52

duty ball type foot valve with flanges, nut bolts, gaskets etc. with necessary

complete accessories. 80 mm dia.

30 Supply, installing, testing and commissioning of Normax make CI heavy 2.00 Nos. 6161.00

duty ball type foot valve with flanges, nut bolts, gaskets etc. with necessary

complete accessories. 100 mm dia.

31 Supply, installing, testing and commissioning of Normax make CI heavy 2.00 Nos. 12407.85

duty ball type foot valve with flanges, nut bolts, gaskets etc. with necessary

complete accessories. 150 mm dia.

32 Supply, installation, testing & commissioning of Four way fire brigade Inlet 2.00 Nos. 8986.98

connection with 63 mm dia. stainless steel (SS304) instantaneous male

inlets with built in non return valve in each inlet with 150 mm dia. header

pipe, suitable rubber cap and GI chain including nuts, bolts, washers, gasket

3 mm thick, etc. with all complete.

33 Supply, installation, testing & commissioning of Two way fire brigade Inlet 2.00 Nos. 5135.85

connection with 63 mm dia. stainless steel (SS304) instantaneous male

inlets with built in non return valve in each inlet with 100 mm dia. header

pipe, suitable rubber cap and GI chain including nuts, bolts, washers, gasket

3 mm thick, etc. with all complete.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

34 Supplying FIRE bucket round bottom of 9 liters capacity made out of 24 16.00 Nos. 1027.17

gauge G.I Sheet with extra handle at bottom duly painted white inside and

Red out side with FIRE mark. Filled with dry-sand and kept on existing

stand provided or hung on wall hook.

35 Supplying and erecting floor mounting Stand for keeping four nos. of FIRE 4.00 Nos. 5560.05

buckets comprising 1500 mm in length, 900 mm height frame made out of

30mm x 30 mm x 4 mm angle iron with cross supports legs, welded with

hooks and duly painted with one coat of primer and two coats of approved

enamel P O red paint.

36 Supply & installation of stainless steel body Orifice Plate of suitable inner 18.00 Nos. 1069.59

bore along with matching flange - as per specification & requirement as per

hydraulic calculation.

37 Providing and fixing approved make Perforated C type cable tray. Made 20.00 Mtr. 471.67

from pre- galvanized sheet steel. The cable tray should be bended as per IS

2062/1079 . with max 17.5% perforation with coupler plate / Fish plate and

GI hardware like nut - bolt and washers etc. erected on existing support as

per Specification and as per instruction of engineer in charge..(5) 300 X

X 1.5 mm Thick.

38 Providing and fixing approved make Perforated C type cable tray. Made 20.00 Mtr. 322.19

from pre- galvanized sheet steel. The cable tray should be bended as per IS

2062/1079 . with max 17.5% perforation with coupler plate / Fish plate and

GI hardware like nut - bolt and washers etc. erected on existing support as

per Specification and as per instruction of engineer in charge..(3) 150 X

X 1.5 mm Thick.

39 Supply, installation, testing & commissioning of Oblique pattern type 16.00 Nos. 5433.80

stainless steel (SS 304) single headed External Fire Hydrant Valve with

mm dia. female instantaneous outlet conf. to IS: 5290, type - A, including

mating flanges, galvanised nuts, galvanised bolts/studs, washers & gaskets

mm thick with all complete.

40 Supply, installation, testing & commissioning of 63 mm dia. stainless steel 16.00 Nos. 1754.37

(SS 304) Universal Branch Pipe conf. to IS:

41 Supply & installation, testing & commissioing of Fire Fighting Hose - conf. 16.00 Nos. 6966.98

to IS : 636, type B (type- 3), The fire hose shall be 15 m long with 63 mm

dia. stainless steel (SS 304) couplings conf. to IS: 903, at both the ends for

connection with the hydrant valve and the branch pipe.

42 Supply, installation, testing & commissioning of fabricated from 3 mm MS 16.00 Nos. 2525.00

sheet, hose box of size-450 mm x 600 mm x 250 mm - painted with Fire

Red as per IS: 5, shade no. 536 front 3 mm thick transparent glass with lock

& key, handle and brass hinges - to accommodate one number of 15 mtr

long hose and one number of universal branch pipe, including supporting

arrangement with civil work.

43 Supply, Installation, testing & commissioing of Swinging type mild steel 16.00 Nos. 7403.30

hose reel drum with 20 mm dia. x 30 mtr. rubber hose as per IS: 884. The

mounting stand shall be of mild steel and the hose shall be fitted with a SS

shut-off nozzle & SS ball valve of 25 mm dia. including supporting

arrangement with all complete. accessories

44 Supplying, fixing & testing of of CI ball Valve 25mm dia. (Thread) 44.00 Nos. 707.00

45 Supplying, fixing & testing of New Battery of diesel engine 150 Amp. 2.00 Nos. 15833.77

46 Supply and installation of Diesel Tank For Diesel Engine With All 2.00 Nos. 16690.25

Accessories 100 Ltrs.

47 Supplying, filling & testing lube oil for diesel engine 40.00 Ltrs. 320.17

48 Supply and commissioning of Oil Filter. 2.00 Nos. 705.99

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

49 Supplying, filling of diesel in diesel engine tank 100.00 Ltrs. 89.79

50 Supply and commissioning of Diesel Filter 2.00 Nos. 427.94

51 Supplying, filling & testing coolant to engine cooling for radiator 40.00 Ltrs. 239.65

52 Excavation for foundation upto 1.5 m depth including sorting out and 7.50 Cumt 122.94

stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(A) Loose or soft soil

53 Providing erecting and fixing double coated (ISI) water tank of required 40000.00 Ltrs. 3.22

capacity each with all necessary fittings and connection etc. complete on

54 Filling Of Gaps Between pipe and Core Cutting Hole With Chemical and 52.00 Nos. 299.57

55 Steel work, welded in built up sections framed work including cutting, 250.00 Kgs. 91.08

hoisting, fixing in position and applying a priming coat of read lead paint &

two coat oil paint. (A)In beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross beams. Hip and jack

rafters, purlins conneted to common rafters and the like.

56 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 25.00 Mtr. 136.35

1.1 KV grade to be erected as directed of following size. (E) 3 core 2.5 Sq.

mm for pressure switch

57 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 25.00 Mtr. 285.83

multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road crossing or floor of following

size of cable. (Only Fire Panel to Fire Pump) (B) 3 core 4 Sq. mm.

58 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 25.00 Mtr. 497.93

multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road crossing or floor of following

size of cable. (Only Fire Panel to Fire Pump) (D) 3 core 10 Sq. mm (Only

Fire Panel to Fire Pump)

59 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 25.00 Mtr. 213.11

multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road crossing or floor of following

size of cable for Diesel Engine Battery Charger (A) 3 core 2.5Sq. mm.

60 Supply, Filling and Fixing of approved make ABC type fire extinguisher - 6 10.00 Nos. 1968.49

Kg. Capacity as per IS:15683 & IS :

61 Supply, Filling and Fixing of approved make CO2 type fire extinguisher. 10.00 Nos. 5520.66

Capacity 4.5 Kg. (conforming to IS-15683).

62 Supply, Filling and Fixing of approved make ABC Moduler type automatic 2.00 Nos. 3422.89

fire extinguisher. Capacity 5 Kg. (conforming to IS-15683).

63 Submitting the application to obtain Fire Plan Approval and After 2.00 Nos. 75750.00

Completion of Work Obtain Final Fire NOC for 3 Year.

64 Supply, Installation and commissioning of Air Release Valve, 25 mm Dia. 4.00 Nos. 1411.98

65 Supply, Installation and commissioning of Fire Alarm Panel Conventional 4.00 Nos. 25250.00

type, 4 zone, with complete accessories.

66 Supply, Installation and commissioning of smoke detectors / heat detectors, 50.00 Nos. 1025.15

with complete accessories.

67 Supply, Installation and commissioning of plug in base for the smoke 50.00 Nos. 256.54

detectors, hooters, with complete accessories.

68 Supply, Installation and commissioning of Audio hooters , with complete 12.00 Nos. 1069.59

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

69 Supply, Installation and commissioning of Manual Call Points, with 12.00 Nos. 1010.00

complete accessories.

70 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 1350.00 Mtr. 176.75

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

(A) 2 core 2.5 Sq. mm for Fire Alarm System

71 Core cutting in wall and in RCC slab with size as below: 50 mm dia. Hole. 22.00 Nos. 338.35

72 Core cutting in wall and in RCC slab with size as below: 80 mm dia. Hole. 8.00 Nos. 426.22

73 Core cutting in wall and in RCC slab with size as below: 100 mm dia. Hole. 8.00 Nos. 513.08

74 Core cutting in wall and in RCC slab with size as below: 150 mm dia. Hole. 8.00 Nos. 595.90

75 Core cutting in wall and in RCC slab with size as below: 200 mm dia. Hole. 6.00 Nos. 853.45

76 Supply, installation, testing & commissioning of ISI approved electrical 2.00 Set 186850.00

motor operated Kirloskar make fire hydrant main pump set horizontal end

suction back pull out top discharge centrifugal fire pump set with all the

standard acessories, base frame, coupling, and foundation bolts with

following specifications Model -DB 80/26, Flow-97 m3/hr, Head-70 meter,

Motor Rating -30KW/40HP/3 ph Suc x Del - 80 x

77 Supplying, installing, testing and commissioning of Kirloskar make diesel 2.00 Set 378750.00

engine driven fire hydrant pump set, suitable for automatic operation and

consisting of horizontal type centrifugal end suction back pull-out, top

discharge pump with cast iron body and bronze impeller, mounted on M.S.

fabricated common base plate with coupling, coupling guard, foundation

bolts and all necessary accessories, complete as required. The pump shall be

of Model KFE, having a discharge capacity of 97 m³/hr at 70 meters head,

driven by a diesel engine, 3 phase, with suction and delivery size of 100 mm

78 Fire Hydrant Panel suitable for 10 HP Jockey Pump, 40 HP (97 m³/hr @ 70 2.00 Nos. 101000.00

m head) Main Electrical Pump and Suitable BHP (97 m³/hr @ 70 m head)

Diesel Engine Operated Pump, consisting of Incomer with MCCB (1 No.),

R Y B Indication (1 Set) and VAF Digital Meter (1 Set); Outgoing with F1

– 60 HP Star Delta Starter for Main Pump, F2 – 10 HP DOL Starter for

Jockey Pump, F3 – Auto On/Off Diesel Pump with Battery Charger,

Control Circuit with Auto/Manual On/Off, On/Off Trip Indication and

On/Off Push Button; Fabrication duly powder coated in PO Red Colour,

fabricated from 14/16 SWG GI Sheet with IP-42 Protection, fixed type floor

mounted with bottom cable entry, complete as required.

79 Pay Legal Fees to Concern Authority for Obtaining Plan Approval and Final 4600.00 Sq. 10.10

80 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- 5.40 Cumt 3741.69

graded stone aggregates 20 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth.

81 Brick work using common burnt clay building bricks crushing strength not 16.20 Cumt 4503.04

less than 35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1

cement : 6 fine sand) (B) Conventional For Groud Floor.

82 20 mm Thick sand faced cement plaster on walls for all height above 57.60 Sqmt 315.69

ground level consisting of 12 mm Thick backing coat of c.m. 1:3 (1 cement

: 3 sand) and 8 mm Thick finishing coat of c.m. 1:1 (1 cement : 1 sand) etc.

complete.all height.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

83 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. 100.00 Rmt 195.67

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of MS Z clamp at

every two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

(Rupees Forty-six Lakhs Seventy-five Thousand Five Hundred Fifty-four and Paise Fourteen Only.)

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the estimated rates

mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 4675554.14 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per

actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate

of input rate mentioned in all the tender.

5 GST will be paid extra as per Govt. amendment.

Signature of Bidder Depuy Executive Engineer

Mandvi (R&B) Sub Division,

Executive Engineer

Surat (R&B) Division No.2,