Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹15.7 Cr
EMD Value
₹15.7 L
Closing Date
21 Oct 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Construction of New Intra City Bus Terminus along with Commercial Space Development at Puducherry
NBCC/SBGSouth/SmartCity/Pudchry/Works/2022/19~EW1be62deac9759648ee08f686
NBCC/SBGSouth/SmartCity/Pudchry/Works/2022/19
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹15.7 L
21 Oct 2022
30 Sept 2022
21 Oct 2022
30 Sept 2022
21 Oct 2022
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Earth work in excavation by mechanical means (Hydraulic
excavator) / manual means in foundation trenches or drains
(not exceeding 1.5 m in width or 10 sqm on plan), including
1 2.8.1 dressing of sides and ramming of bottoms, lift upto 1.5 m, Cum 3,229.56 161.59 521,861.58
including getting out the excavated soil and disposal of
surplus excavated soil as directed, within a lead of 50 m for
all kinds of soil
As per Item 1 with Extra for every additional lift of 1.5 m or
2 part thereof in excavation / banking excavated or stacked - - -
materials. All Kinds Of Soil
Filling available excavated earth (excluding rock) in trenches,
plinth, sides of foundations etc. in layers not exceeding 20cm
in depth, consolidating Each deposited layer by ramming and
watering, lead up to 50 m and lift upto 1.5 m.
Clearing jungle including uprooting of rank vegetation, grass,
brush wood, trees andsaplings of girth upto 30cm measured
4 2.31 at a height of 1m above ground level and removal of rubbish Sqm 13,746.00 9.63 132,357.48
upto a distance of 50 m outside the periphery of the area
Supplying chemical emulsion in sealed containers including
5 2.34.1 delivery as specified . Chlorpyriphos/ Lindane emulsifiable Liter 815.00 370.98 302,348.86
concentrate of 20%
Diluting and injecting chemical emulsion for POST -
CONSTRUCTIONAL anti-termite treatment (excluding the cost
of chemical emulsion) - tratment of soil under existing flooors
using chemical emulsion @ one litre per hole, 300mm apart
including drilling 12mm diametre holes and plugging with
cement mortar 1:2 (1 cement : 2 coarse sand) to match the
existing floor - with Chlorpyriphos / lindane E.C. 20% with
1% concentration
Supplying , filling , spreading & leveling Brick aggregate
7 145(0287) (single size):40mm nominal size ,inrecharge pit, in the Cum 11.00 449.58 4,945.38
required thickness, for all leads & lifts , all complete
Supplying , filling , spreading & leveling Stone aggregate
8 152(0295) (single size):20mm nominal size ,inrecharge pit, in the Cum 0.50 1,056.10 528.05
required thickness, for all leads & lifts , all complete
Supplying and filling with gravel (excluding rock) in
trenches, plinth, sides of foundations etc. In layers not
9 2.27A.1 exceeding 20 cm in depth consolidating each deposited Cum 14,222.00 747.16 10,626,169.25
layers by ramming and watering etc. complete including all
Boring , providing and installation bored cast-in-situ
reinforced cement concrete piles of grade M-30 of specified
diameter and length below pile cap,to carry a safe working
load not less than specified , excluding the cost of steel
reinforcement but including the cost of boring with bentonite
solution and temporary casing of appropriate length for
setting out and removal of same and the of the pile to be
embedded in the pile cap etc. by Crawler mounted ,
telescopic boom hydraulic pilling Rig all complete, including
removal of excavated earth with all its lifts and leads (length
of pile for payment shall be measured up to bottom of pile
cap). - 600 mm dia piles - Using Slag Cement Note: Truck
Mounted rotary / TMR / Tube well boaring machine shall not
Vertical load testing of piles in accordance with IS 2911 (Part
IV) including installation of loading platform and preparation
of pile head or construction of test cap and dismantling of
test cap after test etc. complete as per specification - Single
pile above 50 tonne and upto 100 tonne capacity -Initial
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Vertical load testing of piles in accordance with IS 2911 (Part
IV) including installation of loading platform and preparation
of pile head or construction of test cap and dismantling of
test cap after test etc. complete as per specification - Single
pile above 50 tonne and upto 100 tonne capacity -Routine
Supplying and filling in plinth with sand under floors,
13 2.27 including watering, ramming, consolidating and dressing Cum 598.12 2,213.11 1,323,716.71
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from
14 4.1.4 natural sources : 4 graded stone aggregate 20 mm nominal Cum 65.52 6,092.13 399,156.20
size derived from natural sources
Providing and laying in position cement concrete of specified
grade excluding the cost of centering and shuttering - All
15 4.1.8 work up to plinth level : 1:4:8 (1 Cement : 4 coarse Cum 680.58 4,907.68 3,340,088.59
sand) : 8 graded stone aggregate 40 mm nominal
Providing and laying in position cement concrete of specified
grade excluding the cost of centering and shuttering - for
road works : 1:4:8 (1 Cement : 4 coarse sand) : 8
graded stone aggregate 40 mm nominal size)
Providing and laying sand gravel mix 1:1 of 150mm
consolidated thickness using 0.68cum of sand & 0.62cum of
gravel for 1cum finished to a soaked CBR value of minimum
20 including cost and conveyance of sand and gravel to the
work site and stacking to the standard departmental gauge
for premeaurement, mixing the required quantities of sand
and gravel, spreading watering and consolidation the mix by
power roller rolling to achive the required proctor density
including the labour charges for mixing, spreading, hire and
fuel charges for power roller and all other tools and plants
employed etc., complete. As per clause no 401 of MOT
Centering and shuttering including strutting , propping etc
18 5.9.1 and removal of form for - foundations, footings, bases of Sqm 937.46 290.87 272,679.28
columns etc for mass concrete
Centering and shuttering including strutting , propping etc
19 5.9.5 and removal of form for -Lintels, beams, plinth beams, Sqm 2,670.48 468.09 1,250,034.75
girders, bressumers and catilevers
Centering and shuttering including strutting, propping etc
20 5.9.6 and removal of form for - Columns, Pillars, Piers, Abutments, Sqm 1,305.96 685.03 894,613.03
Posts and Struts
Centering and shuttering including strutting, propping etc
21 5.9.3 and removal of form for - Suspended floors, roofs, landings, Sqm 2,739.94 579.47 1,587,726.94
balconies and access platform
Centering and shuttering including strutting , propping etc
22 5.9.7 and removal of form for - Stairs , (excluding landings) except Sqm 40.90 527.72 21,583.73
spiral -staircases
Centering and shuttering including strutting , propping etc
and removal of form for - Walls (any thickness ) including
attached pilasters , butteresses , plinth and string courses
Extra for additional height in centering , shuttering where
ever required width adequate bracing, propping etc.
including cost of de-shuttering and decentering at all levels,
24 5.11.1 over a height of 3.5m, for every additional height of 1metre Sqm 2,076.51 233.63 485,130.17
or part thereof (plan area to be measured) - Suspended
floors, roofs, landing, beams and balconies (Plan area to be
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Providing and laying in position machine batched and
machine mixed design mix M-30 grade cement concrete for
reinforced cement concrete work , using cement content as
per approved design mix , including pumping of concrete to
site of laying but excluding the cost of centering , shuttering
, finishing and reinforcement , including admixtures in
25 5.33.1B recommended proportions as per IS : 9103 to accelerate, cum 916.50 7,652.08 7,013,116.22
retard setting of concrete , improve workability without
impairing strength and durability . Note:- Cement content
considered in this item is @ 330 kg / cum. Excess or less
cement used as per design mix is payable or recoverable
separately. - All work upto plinth level - Using Portland Slag
Add 10kg for using extra cement in the items of design mix
26 5.35B over and above the specified cement content therein - Using Cum 155.67 856.37 133,308.48
Portland Slag Cement
Providing and laying in position machine batched and
machine mixed design mix M-30 grade cement concrete for
reinforced cement concrete work , using cement content as
per approved design mix , including pumping of concrete to
site of laying but excluding the cost of centering , shuttering
, finishing and reinforcement , including admixtures in
27 5.33.2B recommended proportions as per IS : 9103 to accelerate, Cum 579.85 8,523.03 4,942,046.98
retard setting of concrete , improve workability without
impairing strength and durability . Note:- Cement content
considered in this item is @ 330 kg / cum. Excess or less
cement used as per design mix is payable or recoverable
separately. - All work above plinth level upto floor V level -
Using Portland Slag Cement
Add 10kg for using extra cement in the items of design mix
over and above the specified cement content therein
Furnishing and placing reinforced cement concrete in
superstructure as per drawing and technical specifications -
29 14.1E.1.1 PSC grade M40 with a minimum cement content 430 kg / Cum 1,661.70 10,006.94 16,628,536.85
cum - Using concrete mixer - for superstructure- height upto
5m including all machineries and formwork, etc.l
Providing and laying pitching on slopes laid over prepared
filter media including boulder apron laid dry in front of toe
of embankment complete as per drawing and technical
specifications - Cement concrete blocks of size 0.3 x 0.3 x
0.3 m cast in cement concrete of grade M15 (add 2 percent
of cost to account for excavation for preparation of
bed,nominal surface reinforcement and filling of granular
material in recesses between blocks)
Providing and laying 60mm thick factory made cement
concrete interlocking paver block of M-30 grade made by
block making machine with strong vibratory compaction and
31 16.68 of approved size and design / shape laid in required colour Sqm 1,811.00 724.10 1,311,336.41
and pattern over and including 50mm thick compacted bed
of course sand , filling the joints with coarse sand etc. all
Steel reinforcement for R.C.C.work including straightening ,
cutting , bending , placing in position and binding all
complete upto plinth level - Thermo -Mechanically treated
bars Fe - 500 or more
Steel reinforcement for R.C.C.work including straightening ,
cutting , bending , placing in position and binding all
complete above plinth level - Thermo -Mechanically treated
bars Fe - 500 or more
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Providing & laying vacuum dewatered flooring (Tremix Floor)
of RCC including providing side shuttering with MS channels,
vibrating concrete by using screed vibrator and suction
dewatering using approved make equipment and finishing
34 the top surface to required level and grade using power Sqm 5,730.00 118.00 676,140.00
trowels of standard make. Rate to include for covering the
finished concrete surface with 200 micron thick polythene
sheet and curing. (Concrete & Reinforcement shall be
measured and paid separetely.)
Providing anticorrosive treatment to HYSD reinforcement
with fusion bonded epoxy coating the rate includes cost of
anticorrosive coating including cost of powder , sand
blasting, cleaning , induction , heating , depreciation of
35 5.22.8 machinery etc, wastage in cut length of bars , provision of Tonne 193.40 15,397.14 2,977,863.33
wooden battens between rows of coated bars , cover to work
bush pins / bar bending machines etc - for bars of 20mm to
32 mm diametre - conforming to IS 13620 -1993 (PY PWD
Providing anticorrosive treatment to HYSD reinforcement
with fusion bonded epoxy coating the rate includes cost of
anticorrosive coating including cost of powder , sand
blasting, cleaning , induction , heating , depreciation of
36 5.22.9 machinery etc, wastage in cut length of bars , provision of Tonne 116.04 20,447.41 2,372,721.74
wooden battens between rows of coated bars , cover to work
bush pins / bar bending machines etc - for bars of 8mm to
16 mm diametre - conforming to IS 13620 -1993 (PY PWD
Providing and fixing in position 12mm thick bitumen
impregnated fiber board conforming to IS: 1838, including
cost of primer, sealing compound Grade-A in expansion
Providing and laying autoclaved aerated cement blocks
masonry with 150mm/230mm/300mm thick AAC blocks in
sub structure upto plinth level with RCC band at sill level and
lintel level with approved block laying polymer modified
adhesive mortar all complete .(The payment of RCC band
and reinforcement shall be made for seperately).
Providing and laying damp-proof course 50mm thick with
39 4.11 cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded Sqm 238.00 385.57 91,764.47
stone aggregate 20mm nominal size)
Supplying and fixing C.I. cover without frame for manholes
40 19.18.1 :455x610 mm rectangular C.I. cover (light duty) the weight No 20.00 1,071.43 21,428.56
of the cover to be not less than 23 kg
Providing and fixing in position pre-cast R.C.C. manhole
41 19.19.1.2 cover and frame of required shape and approved quality - LD Nos 21.00 1,080.09 22,681.88
- 2.5 - square shape 450 mm internal dimensions
Providing and fixing ISI marked flush door shutters
conforming to IS : 2202 (Part I) decorative type, core of
block board construction with frame of 1st class hard wood
42 9.20.1 and well matched teak 3 ply veneering with vertical grains or Sqm 2.00 2,683.56 5,367.11
cross bands and face veneers on both faces of shutters 35
mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
Supplying and applying bituminous solution primer on roof
and / or wall surface at 0.24 litre per sqm.
Providing and laying autoclaved aerated cement blocks
masonry with 150mm/230mm/300mm thick AAC blocks in
super structure above plinth level up to floor V level with RCC
44 6.47 band at sill level and lintel level with approved block laying Cum 563.00 8,208.01 4,621,109.18
polymer modified adhesive mortar all complete .(The
payment of RCC band and reinforcement shall be made for
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Provding and laying autoclaved aerated cement blocks
masonry with 100mm thick AAC blocks in superstructure
above plinth level upto floor five level in cement mortar 1:4
(1 cement : 4 coarse sand) . The rate includes providing and
placing in position 2 nos 6 mm dia M.S.bars at every third
course of masonry work.
Fencing with angle iron post placed at required distance
embedded in cement concrete blocks, every 15th post, last
but one end post and corner post shall be strutted on both
sides and end post on one side only and provided with
horizontal lines and two diagonals interwoven with horizontal
46 16.18.1 wires, of barbed wire weighing 9.38 kg per 100 m Rm 2,880.00 16.31 46,965.89
(minimum), between the two posts fitted and fixed with G.I.
staples, turn buckles etc. complete. (Cost of posts, struts,
earth work and concrete work to be paid for separately).
Payment to be made per metre cost of total length of barbed
wire used With G.I. barbed wire
Supplying at site Angle iron post & strut of required size
including bottom to be split and bent at right angle in
opposite direction for 10 cm length and drilling holes upto 10
mm dia. etc. complete.
Providing and fixing M.S. grills of required pattern in frames
of windows etc. with M.S. flats, square or round bars etc.
including priming coat with approved steel primer all
complete. Fixed to steel windows by welding
Providing and fixing double glazed hermetically sealed
glazing in aluminium windows, ventilators and partition etc.
with 6 mm thick clear float glass both side, having 12 mm air
49 21.10 gap, including providing EPDM gasket, perforated aluminium sqm 200.00 3,535.36 707,072.52
spacers, desiccants, sealant (Both primary and secondary
sealant) etc. as per specifications, drawings and direction of
Engineer-in-charge complete.
50 13.1.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) sqm 2,235.64 227.74 509,145.15
51 13.8.3 12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand) sqm 4,192.40 218.45 915,843.11
15 mm cement plaster on rough side of single or halfbrick
52 13.7.2 wall finished with a floating coat of neat cement of mix - 1:4 sqm 380.00 320.28 121,704.73
(1 cement : 4 fine sand)
18 mm cement plaster in two coats under layer 12 mm thick
cement plaster 1:5 (1 cement : 5 coarse sand) and a top
layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse
sand) finished rough with sponge.
54 13.37.1 White washing with lime to give an even shade for New work Sqm 2,169.64 21.54 46,723.24
Providing and applying plaster of paris putty of 2 mm
55 13.26 thickness over plastered surface to prepare the surface even Sqm 1,964.64 207.46 407,576.42
and smooth complete.
Applying one coat of water thinnable cement primer of
56 13.43.1 approved brand and manufacture on wall surface : Water Sqm 4,572.40 55.54 253,962.75
thinnable cement primer
Wall painting with plastic emulsion paint Royal of approved
57 13.60.1A brand and manufacture to give an even shade - two or more Sqm 4,900.40 126.68 620,805.66
coats on new work
Finishing walls with textured exterior paint of required shade
- New work (Two or more coats applied @ 3.28 ltr / 10 sqm )
over and including priming coat of exterior primer applied @
2.20 kg / 10 sqm
Finishing walls with Acrylic Smooth exterior paint of required
shade : New work (Two or more coat applied @ 1.67 ltr/10
sqm over and including priming coat of exterior primer
applied @ 2.20 kg/10 sqm)
Providing wood work in frames of doors , windows, clerestory
windows and other frames , wrought framed and fixed in
60 9.1.2P position with hold fast lugs or with dash fasteners of required Cum 3.12 152,826.06 476,588.07
dia & length (hold fast lugs or dash fastener shall be paid for
separately) -Padak wood
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing panelled or panelled and glazed shutters
for doors, windows, and clerestory windows, including ISI
marked M.S.pressed butt hinges bright finished of required
size with necessary screws, excluding panelling which will be
paid for separately , all complete - Kiln seasoned and
chemically treated Vengai wood - 35 mm thick shutters
Providing and fixing bright finished brass butt hinges with
62 9.72.1 necessary screws etc complete - 125 X 85 X 5.5 mm (heavy Each 44.00 324.06 14,258.79
Providing and fixing bright finished brass butt hinges with
63 9.72.3 necessary screws etc complete - 100 X 85 X 5.5 mm (heavy Each 10.00 282.73 2,827.28
Providing and fixing bright finished brass tower bolts (barrel
type) with necessary screws etc complete - 200 x 10 mm
Providing and fixing bright finished brass door latch with
necessary screws etc complete - 300 x 16 x 5 mm
Providing and fixing bright finished brass 100 mm mortice
66 9.76 latch and lock with 6 levers and a pair of lever handles of Each 27.00 1,305.53 35,249.27
approved quality with necessary screws etc. complete.
Providing and fixing bright finished brass hanging type floor
door stopper with necessary screws, etc. complete.
Providing and fixing aluminium extruded section body tubular
type universal hydraulic door closer (having brand logo with
ISi, IS : 3564, embossed on the body, door weight upto 36
kg to 80 kg and door width from 701 mm to 1000 mm), with
double speed adjustment with necessary accessories and
screws etc. complete.
Providing and fixing bright finished brass handles with screws
etc complete - 125 mm
Providing and fixing factory made uPVC white colour
casement /casement cum fixed glazed windows comprising
of uPVC multi-chambered frame , sash and mullion(where
ever required) extruded profiles duly reinforced with 1.60 +
or - 0.2 mm thick galvanized mild steel section made from
roll forming process of required length (shape & size
according to uPVC profile), uPVC extruded glazing beads of
appropriate dimension , EPDM gasket , stainless steel (SS
304 grade) friction hinges , zinc alloy (white powder coated)
casement handles, G.I fasteners 100 x 8 mm size for fixing
frame to finished wall , plastic packers , plastic caps and
70 9.147A.3 necessary stainless steel screws etc. Profile of frame & sash Sqm 1.50 8,877.68 13,316.52
shall be mitred cut and fusion welded at all corners, mullion
(if required) shall be also fusion welded including drilling of
holes for fixing hardware's and drainage of water etc. After
fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealent over
backer rod of required size and of approved quality , all
complete as per approved drawing.(Single / double glass
panes and silicon sealent shall be paid separately) -
Casement window double panels with top fixed with S.S.
friction hinges (350 x 19 x 1.9 mm) made of (small series)
frame 47 x 50 mm , sash 47 x 68 mm & mullion 47 x 68 mm
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing factory made uPVC white colour
casement /casement cum fixed glazed windows comprising
of uPVC multi-chambered frame , sash and mullion (where
ever required) extruded profiles duly reinforced with 1.60 +
or - 0.2 mm thick galvanized mild steel section made from
roll forming process of required length (shape & size
according to uPVC profile), uPVC extruded glazing beads of
appropriate dimension , EPDM gasket , stainless steel (SS
304 grade) friction hinges , zinc alloy (white powder coated)
casement handles, G.I fasteners 100 x8 mm size for fixing
frame to finished wall , plastic packers , plastic caps and
necessary stainless steel screws etc. Profile of frame & sash
shall be mitred cut and fusion welded at all corners, mullion
(if required) shall be also fusion welded including drilling of
holes for fixing hardware's and drainage of water etc. After
fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealent over
backer rod of required size and of approved quality , all
complete as per approved drawing.(Single / double glass
panes and silicon sealent shall be paid separately) -
Casement cum fixed panel window having both end single
casement panel , middle fixed panels and at top completely
fixed ventilator
Providing with S.S
and fixing friction
factory madehinges (350
P.V.C. x 19frame
door x 1.9)ofmade
50x47 mm with awall thickness of 5 mm, made out of
extruded 5mm rigid PVC foam sheet, mitred at corners and
joined with 2 Nos of 150 mm long brackets of 15x15 mm
M.S. square tube, the vertical door frame profiles to be
reinforced with 19x19 mm M.S. square tube of 19 gauge,
EPDM rubber gasket weather seal to be provided through out
the frame. The door frame to be fixed to the wall using M.S.
screws of 65/100 mm size, complete as per manufacturer’s
Providing and fixing factory made panel PVC door shutter
consisting of frame made out of M.S. tubes of 19 gauge
thickness and size of 19 mm x 19 mm for styles and 15x15
mm for top & bottom rails. M.S. frame shall have a coat of
steel primers of approved make and manufacture. M.S. frame
covered with 5 mm thick heat moulded PVC 'C' channel of
size 30 mm thickness, 70 mm width out of which 50 mm
shall be flat and 20 mm shall be tapered in 45 degree angle
on both side forming styles and 5 mm thick, 95 mm wide
PVC sheet out of which 75mm shall be flat and 20 mm shall
be tapered in 45 degree on the inner side to form top and
bottom rail and 115 mm wide PVC sheet out of which 75 mm
shall be flat and 20 mm shall be tapered on both sides to
form lock rail. Top, bottom and lock rails shall be provided
both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm
wide cross PVC sheet be provided as gap insert for top rail &
bottom rail, paneling of 5 mm thick both side PVC sheet to
be fitted in the M.S. frame welded/ sealed to the styles &
rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC
sheet beadingon inner side, and joined together with solvent
cement adhesive. An additional 5 mm thick PVC strip of 20
mm width is to be stuck on the interior side of the 'C'
Channel using PVC solvent adhesive etc. complete as
Supplying and fixing rolling shutters of approved make, made
of required size M.S.laths, interlocked together through their
entire length and jointed together at the end by end locks ,
mounted on specially designed pipe shaft with brackets, side
guides and arrangements for inside and outside locking with
74 10.6.2 push and pull operation complete, including the cost of Sqm 115.20 3,253.54 374,808.18
providing and fixing necessary 27.5 cm long wire springs
manufactured from high tensile steel wire of adequate
strength conforming to ISS :4454 -part 1 and M.S.top cover
of required thickness for rolling shutters - 80 x 1.20mm
M.S.laths with 1.25 mm thick top cover
75 10.7 Providing and fixing ball bearing for rolling shutters. each 12.00 397.54 4,770.50
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Providing and laying ceramic glazed floor tiles of size
300x300 mm (thickness to be specified by the
manufacturer), of commercial quality conforming to IS :
76 11.37.2 15622, of approved make in colours such as white, Ivory, Sqm 63.00 856.62 53,967.12
Grey, Fume red brown ,laid on 20mm thick cement mortar
1:4 (1 cement : 4 coarse sand), including pointing the joints
with white cement and matching pigment etc., complete
Providing and laying water proofing treatment in sunken
portion of WCs, bathroom etc., by applying cement slurry
mixed with water proofing cement compound consisting of
applying : (a) First layer of slurry of cement @ 0.488 kg/sqm
mixed with water proofing cement compound @ 0.253 kg/
sqm. This layer will be allowed to air cure for 4 hours. (b)
Second layer of slurry of cement @ 0.242 kg/sqm mixed with
water proofing cement compound @ 0.126 kg/sqm. This
layer will be allowed to air cure for 4 hours followed with
water curing for 48 hours.The rate includes preparation of
surface, treatment and sealing of all joints, corners, junctions
of pipes and masonry with polymer mixed slurry.
Providing and laying vitrified floor tiles of size 600 x600 mm
(thickeness to be specified by the manufacturer) with water
absorption less than 0.08% and conforming to IS: 15622 of
78 11.41.2 approved make , in all colours and shades, laid on 20 mm Sqm 439.00 1,278.99 561,476.70
thick cement mortar 1:4 (1 cement : 4 coarse sand) ,
including grouting the joints with white cement and matching
pigments etc., complete - size of tile600x600mm
Providing and laying flamed finish granite stone flooring in
required design and patterns, in linear as well as curvilinear
portions of the building all complete as per the architectural
drawings with 18mm thick stone slab over 20mm (average)
thick base of cement mortar 1:4 (1 cement : 4 coarse sand)
laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade
including rubbing, curing and polishing etc. all complete as
specified and as - flamed finish granite stone slab Jet black ,
Cherry red, Elite brown, Cat eye or equivalent
Extra for pre finished nosing to treads of steps of granite
Providing and fixing 1st quality ceramic glazed wall tiles
conforming to IS : 15622 (thickness to be specified by the
manufacturer) , of approved make (Jhonson / Asian /
Somany / Nitco) in all colours , shades of size 300 x 450 mm
81 11.36 as approved in skirting , risers of steps and dados, over Sqm 391.00 1,072.94 419,518.99
12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse
sand ) and jointing with grey cement slurry @ 3.3 kg per
sqm, including pointing in white cement with pigment of
matching shade complete - size 300x450 mm
Painting wood work with Deluxe Multi Surface Paint of
required shade. Two or more coat applied @ 0.90 ltr/10 sqm
over an under coat of primer applied @0.75 ltr/10 sqm of
approved brand and manufacture
Painting Steel work with Deluxe Multi Surface Paint to give
an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm
over an under coat of primer applied @ 0.80 ltr/ 10 sqm of
approved brand and manufacture.
Providing and fixing M.S. grills of required pattern in frames
of windows etc. with M.S. flats, square or round bars etc.
including priming coat with approved steel primer all
complete. Fixed to steel windows by welding .
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing stainless steel ( Grade 304) railing made
of Hollow tubes, channels, plates etc., including welding,
grinding, buffing, polishing and making curvature (wherever
required) and fitting the same with necessary stainless steel
nuts and bolts complete, i/c fixing the railing with necessary
85 10.28 accessories & stainless steel dash fasteners , stainless steel KG 42.24 556.23 23,495.09
bolts etc., of required size, on the top of the floor or the side
of waist slab with suitable arrangement as per approval of
Engineer-in-charge, (for payment purpose only weight of
stainless steel members shall be considered excluding fixing
accessories such as nuts, bolts, fasteners etc.).
Providing & fixing UV stabilised fibre glass reinforced plastic
sheet roofing upto any pitch, including fixing with polymer
coated 'J' or 'L' hooks, bolts & nuts 8mm dia G.I.plain /
bitumen washers complete but excluding the cost of purlins ,
rafters ,trusses etc. The sheets shall be manufactured out of
2400 TEX panel rovigs incorporting minimum 0.3% ultra -
86 12.47.1 voilet stabiliser in resin system under approximately 2400 psi Sqm 807.30 1,014.03 818,628.84
and hot cured. They shall be of uniform pigmentation and
thickness without air pockets and shall conform to IS 10192
and IS 12866. The sheets shall be opaque or translucent,
clear or pigmented , textured or smooth as specified - 2mm
thick corrugated (2.5" or 4.2 " or 6") or step-down (2" or 3"
or 6") as specifed
Structural steel work riveted , bolted or welded in built up
sections , trusses and framed work , including cutting,
hoisting , fixing in position and applying a priming coat of
approved steel primer all complete
"Design supply & installation of suspended Spider Glazing
system designed to with stand the wind pressure as per IS
875 (Part - III). The Suspended System held with Spider
Fittings of SS - 316 grade Steel of approved manufacturer
with glass panel having 12mm thick clear toughened glass
held together with SS - 316 Grade Stainless steel Spider &
bolt assembly with laminated glass fins 21 mm thick . The
Glass fins and glass panel assembly shall be connected to
slab / beams by means of SS - 316 Grade stainless steel
brackets & Anchor bolts and at the bottom using SS channel
of 50x25x2mm using fastener & anchor bolts , non staning
88 26.80 weather sealants of approved make, Teflon / nylon bushes Sqm 480.00 3,731.77 1,791,251.33
and separators to prevent bimetallic contacts, all complete to
perform as per specification and approved drawings . The
complete system to be designed to accommodate thermal
expansion & seismic movements etc . The joints between
glass panels (6 to 8 mm) and gaps at the perimeter & in U
channel of the assembly to be filled with non staining
weather sealant , so as to make the entire system fully water
proof & dust proof. The rate shall include all design,
Engineering and shop drawing including approval from
structural designer , labour ,T&P , scaffolding , other
incidental charges including wastage, enabling temporary
"Providing , supplying fixing & cladding of aluminium
rollcoated composite panel 3 mm thick material having more
than 70 % of PVdf with all coatings not exceeding AAMA at
605.2-requirements , with anti-toxic low density polythene
having aluminium coated with chrome or polyester ,
polyvinylidien fluoride of HY lar 5000 in ausimont USA &
kynar 500 in Elf - Atosem will be fixed on the anodized
aluminium extruded section strucutral frame for a wall
panelling work with required projection by using MS -cleats /
angles / aluminium 'L' angles and grooves , in ACP folding as
per site requirement whereever necessary. The plain ACP
folding will be reinforced by using type system.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Providing and laying soft Korean grass turfing including
supplying red earth,manure, river sand, labour charges for
90 11.30 ground preparation spreading earth and manure Sqm 2,983.00 955.29 2,849,637.83
transportation of all and maintaining the lawn for initial
three months etc. complete.
Sub Total (Civil Work) - 140,116,308.44
WATER SUPPLY AND SANITARY ARRANGEMENTS -
Boring / drilling bore well of required dia for casing / strainer
pipe, by suitable method prescribed in IS : 2800 (part 1) ,
including collecting samples from different strata , preparing
and submitting strata chart /bore log, including
hire & running charges of all equipments, tools , plants &
machineries required for the job, all complete - upto 90
metre depth below ground level - all types of soil - 300 mm
Boring / drilling bore well of required dia for casing / strainer
pipe, by suitable method prescribed in IS : 2800 (part 1) ,
including collecting samples from different strata ,
preparing and submitting strata chart /bore log, including
hire & running charges of all equipments, tools , plants &
machineries required for the job, all complete - beyond 90
metre & upto 150 metre depth below ground level -all types
of soil - 300 mm dia
Supplying and lowering of UPVC 150mm dia Plain casing
pipe confirming to IS:12818-1992 with relevant amendments
with class designation CM and with minimum wall thickness
93 30.29 of 7.5 mm as per I.S.Code into the bore well with proper RM 230.00 1,144.68 263,277.00
vertical alignments etc. Including the cost of materials , but
excluding the cost of labour for positioning the assembly for
lowering purpose using contractor's rig
Extra for providing 3 mm slots in 150mm dia.UPVC casing
Supplying, assembling, lowering and fixing in vertical
position in bore well, unplasticized PVC medium well casing
95 24.4.2 (CM) pipe of required dia , conforming to IS:12818, including RM 100.00 628.63 62,863.32
required hire and labour charges, fittings & accessories etc.
all complete , for all depths - 150 mm nominal size dia
Supplying , filling , spreading & leveling stone boulders of
96 24.5 size rage 5 cm to 20 cm,inrecharge pit, in the required Cum 18.10 821.95 14,877.34
thickness, for all leads & lifts , all complete
Supplying, filling, spreading and levelling gravels of size
range 5 mm to 10 mm , in the recharge pit, over the
existing layer of boulders , in required thickness for all
leads and lifts , all complete
Gravel packing in tubewell construction in accordance with
IS :4097, including providing gravel fine / medium / coarse,
in required grading and sizes as per actual requirement , of
Supplying of electrically operated wet type submersible
motor and pumpset AC 3 phase, 415 volts, 50 Hz, 2900-
3000 RPM.The pump shall have brass impeller, high grade
steel shaft with sufficient stages having outlet size of
complete.The rate includes, all taxes, freight, etc., FOR at
site in UT of Puducherry. The pumpset shall be
guaranteed for a period of one year from the date of
commissioning.(5 HP Submersible motor and pumpset).
Supplying and fixing of 5 Hp Diesel Water Pumping Set
WV30D has Engine type of Air-cooled, Displacement of 296
cc, Recoil Engine starting system with Tubular frame. The
Material Type is aluminum and it is recoil start type.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Supplying and fixing of fully automatic air break star-delta
starter range for 5A to 13A F.A.S.D. (Bharat Culter
Hammer/L&T/Siemens make) with suitable M.S. angle frame
etc., complete.- 5HP to 12.5 HP pumpsets
Supplying and fixing of 1x3x4 sqmm (single run) PVC
102 31.258.1A insulated copper submersible flat flexible cable of Finolex Rm 150.00 127.02 19,052.28
make complete.-upto 10HP pumpset
Providing, laying and jointing UPVC pipes (1 Mpa)conforming
to IS specification 4985 and ISI marked including
transportation to the site , lowering to the trenches, laying
to proper grade and alignment, testing of joints with
required testing equipment,including cost of solvent
cement,excluding UPVC specials such as bends,tees,
threaded pieces,couplers,reducer,endcaps etc.,complete all
as per IS and CPWD specification.- 75mm dia.
Providing, laying and jointing UPVC pipes (1
Mpa)conforming to IS specification 4985 and ISI marked
including transportation to the site , lowering to the
trenches, laying to proper grade and alignment, testing of
joints with required testing equipment,including cost of
solvent cement,excluding UPVC specials such as bends,tees,
threaded pieces,couplers,reducer,endcaps etc.,complete all
as per IS and CPWD specification. -50mm dia.
Providing, laying and jointing UPVC pipes (1 Mpa)conforming
to IS specification 4985 and ISI marked including
transportation to the site , lowering to the trenches, laying
to proper grade and alignment, testing of joints with
required testing equipment,including cost of solvent
cement,excluding UPVC specials such as bends,tees,
threaded pieces,couplers,reducer,endcaps etc.,complete all
as per IS and CPWD specification. - 75mm dia.
Providing, laying and jointing UPVC pipes (1 Mpa)conforming
to IS specification 4985 and ISI marked including
transportation to the site , lowering to the trenches,
laying to proper grade and alignment, testing of joints with
required testing equipment,including cost of solvent
cement,excluding UPVC specials such as bends,tees,
threaded pieces,couplers,reducer,endcaps etc.,complete all
as per IS and CPWD specification. - 160mm dia.
Providing, laying and jointing UPVC pipes (1 Mpa)conforming
to IS specification 4985 and ISI marked including
transportation to the site , lowering to the trenches, laying
107 31.160.1M to proper grade and alignment, testing of joints with Rmt 75.00 1,748.48 131,135.76
required testing equipment,including cost of solvent
cement,excluding UPVC specials such as bends,tees,
threaded pieces,couplers,reducer,endcaps etc.,complete all
as per IS and CPWD specification. - 200mm dia.
Providing and laying Non Pressure NP-3 class (Medium duty)
R.C.C. pipes including collars/spigot jointed with stiff mixture
108 19.35.1 of cement mortar in the proportion of 1:2 (1 cement : 2 fine Rmt 15.00 2,262.97 33,944.53
sand) including testing of joints etc. complete 450 mm dia
Providing and fixing on wall face unplasticised Rigid PVC rain
water pipes conforming to IS : 13592 Type A, including
109 12.41.2 jointing with seal ring conforming to IS : 5382, leaving 10 RM 87.00 306.25 26,643.35
mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded
fittings / accessories for unplasticised rigid PVC rain water
110 12.42.5.2 pipes conforming to IS:13592 Type A, including jointing with Each 6.00 188.49 1,130.96
seal ring conforming to IS: 5382, leaving 10mm gap for
thermal expansion - bend 87.5 degree - 110 mm bend
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing on wall face unplasticised - PVC moulded
fittings/ accessories for unplasticised Rigid PVC rain water
111 12.42.6.2 pipes conforming to IS : 13592 Type A, including jointing Each 6.00 373.99 2,243.94
with seal ring conforming to IS : 5382, leaving 10 mm gap
for thermal expansion. Shoe (Plain)-110 mm shoe
Providing and fixing unplasticised -PVC pipe clips of approved
design to unplasticised - PVC rain water pipes by means of
50x50x50 mm hard wood plugs, screwed with M.S. screws of
required length, including cutting brick work and fixing in
cement mortar 1:4 (1 cement : 4 coarse sand) and making
good the wall etc. complete- 100mm
Providing and placing on terrace (at all floor levels)
polyethylene water storage tank ISI: 12701 marked , with
113 18.48A cover and suitable locking arrangement and making Ltr 1,000.00 8.90 8,897.20
necessary holes for inlet, outlet and overflow pipes but
without fittings and the base support for tank - Circular Tank
Providing and fixing gun metal gate valve with C.I.wheel of
approved quality (Screwed end) - 25mm nominal bore
Providing and fixing gun metal gate valve with C.I.wheel of
approved quality (Screwed end) - 32mm nominal bore
Providing and fixing gun metal gate valve with
116 18.17.2 C.I.wheel of approved quality (Screwed end) - 40mm No 2.00 891.70 1,783.40
Providing and fixing gun metal gate valve with
117 18.17.2 C.I.wheel of approved quality (Screwed end) - 50mm No 2.00 1,292.67 2,585.33
Providing and fixing G.I. Pipes complete with G.I. fittings and
clamps, i/c making good the walls etc. concealed pipe,
118 18.11.1 including painting with anti corrosive bitumastic paint, cutting metre 70.00 423.47 29,642.66
chases and making good the wall : 15 mm dia nominal
Providing and fixing C.P. brass bib cock of approved quality
conforming to IS:8931 15 mm nominal bore
Providing and fixing wash basin with C.I. brackets,15 mm
C.P. brass pillar taps, 32 mm C.P. brass waste of standard
pattern, including painting of fittings and brackets, cutting
and making good the walls wherever require:White Vitreous
China Wash basin size 630x450 mm with a pair of 15 mm
C.P. brass pillar taps
Providing and fixing CP Brass 32mm size Bottle Trap of
approved quality & make.
Providing and fixing white vitreous china flat back or wall
corner type lipped front urinal basin of 430x260x350 mm and
340x410x265 mm sizes respectively with automatic flushing
cistern with standard flush pipe and C.P. brass spreaders
with brass unions and G.I clamps complete, including
painting of fittings and brackets, cutting and making good
the walls and floors wherever required :One urinal basin with
5 litre white P.V.C. automatic flushing cistern
Providing and fixing white vitreous china pedestal type water
closet (European type) with seat and lid, 10 litre low level
white vitreous china flushing cistern & C.P. flush bend with
fittings & C.I. brackets, 40 mm flush bend, overflow
arrangement with specials of standard make and mosquito
proof coupling of approved municipal design complete,
including painting of fittings and brackets, cutting and
making good the walls and floors wherever required :
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing water closet squatting pan (Indian type
W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre
low level white P.V.C. flushing cistern, including flush pipe,
with manually controlled device (handle lever) conforming to
IS : 7231, with all fittings and fixtures complete, including
cutting and making good the walls and floors wherever
required:White Vitreous china Orissa pattern W.C. pan of size
580x440 mm with integral type foot rests
Providing and fixing CP Brass Single lever telephonic wall
mixer of quality & make as approved by Engineer in charge.
Providing and fixing unplasticised P.V.C. connection pipe with
126 18.74.2 PTMT Nuts, collar and bush of approved quality and colour. Each 7.00 81.90 573.33
15 mm nominal bore with 45 cm length
Providing and fixing C.P. brass angle valve for basin mixer
127 18.53.1 and geyser points of approved quality conforming to IS:8931 Each 22.00 436.54 9,603.90
15mm nominal bore
Providing and fixing on wall / column face metre 300.93
unplasticed - PVC soil and waste pipes (type - B) conforming
128 19.33.1 to IS : 13592- 1992 including jointing with seal ring metre 44.00 355.10 15,624.29
conformation to IS : 5382 leaving 10mm gap for thermal
expansion - single socked pipes -110mm diametre
Providing and fixing on wall / column face metre 300.93
unplasticed - PVC soil and waste pipes (type - B) conforming
129 19.33.2 to IS : 13592- 1992 including jointing with seal ring metre 54.00 217.47 11,743.60
conformation to IS : 5382 leaving 10mm gap for thermal
expansion - single socked pipes -75mm diametre
Providing and fixing on wall face / column face unplasticised -
PVC moulded fittings / accessories for unplasticisd - PVC soil
130 and waste pipes conforming to IS : 14735 -1999 including - - -
jointing with seal ring conforming to IS : 5382 leaving 10mm
gap for thermal expansion -
(i) Door bends Each 5.00 164.19 820.93
(ii) plain bends Each 5.00 176.63 883.17
(iii) Plain tee Each 3.00 287.35 862.06
(iv) Door tee Each 5.00 313.66 1,568.28
(v) Heel rest bend Each 5.00 119.89 599.44
(i) Door bends Each 5.00 141.19 705.94
(ii) plain bends Each 5.00 120.31 601.56
(iii) Plain tee Each 3.00 181.70 545.09
(iv) Door tee Each 5.00 205.23 1,026.13
(v) Heel rest bend Each 5.00 82.94 414.71
131 Providing and Fixing of PVC floor trap 75 MM Each 17.00 791.78 13,460.26
Providing and fixing square-mouth S.W. gully trap class SP-1
complete with C.I. grating brick masonry chamber with water
tight C.I. cover with frame of 300 x300 mm size (inside) the
132 19.4.1.1 weight of cover to be not less than 4.50 kg and frame to be Each 6.00 1,574.77 9,448.61
not less than 2.70 kg as per standard design: 100x100 mm
size P type With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply,
including all CPVC plain & brass threaded fittings i/c fixing
the pipe with clamps at 1.00 m spacing. This includes
133 18.8.4 jointing of pipes & fittings , with one step CPVC solvement Rmt 120.00 549.07 65,887.90
cement and the cost of cutting chases and making good the
same including testing of joints complete - Concealed work ,
including cutting chases and making good the wall etc - 32
mm nominal outer dia pipes
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply,
including all CPVC plain & brass threaded fittings i/c fixing
the pipe with clamps at 1.00 m spacing. This includes
134 18.8.3 jointing of pipes & fittings , with one step CPVC solvement Rmt 90.00 446.42 40,177.58
cement and the cost of cutting chases and making good the
same including testing of joints complete - Concealed work ,
including cutting chases and making good the wall etc - 25
mm nominal outer dia pipes
Providing and fixing Chlorinated Polyvinnyl metre 432.67
Chloride (CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain & brass threaded
fittings including fixing the pipe with clamps at 1.00m
spacing.This includes jointing of pipes & fittings with one
step CPVC solvent cement and testing of joints complete -
internal work - exposed on wall - 40mm nominal outer dia
Providing and fixing Chlorinated Polyvinnyl metre 432.67
Chloride (CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain & brass threaded
fittings including fixing the pipe with clamps at 1.00m
spacing.This includes jointing of pipes & fittings with one
step CPVC solvent cement and testing of joints complete -
internal work - exposed on wall - 50mm nominal outer dia
Constructing masonry Chamber 60x60x75 cm inside, in
brick work in cement mortar 1:4 (1 cement : 4 coarse sand)
for sluice valve, with C.I. surface box 100 mm top diameter,
160 mm bottom diameter and 180 mm deep (inside) with
chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size ), i/c
137 18.33.1 necessary excavation, foundation concrete 1:5:10 (1 cement Each 6.00 7,832.89 46,997.32
: 5 fine sand : 10 graded stone aggregate 40 mm nominal
size ) and inside plastering with cement mortar 1:3 (1
cement : 3 coarse sand) 12 mm thick, finished with a floating
coat of neat cement complete as per standard design :With
common burnt clay F.P.S.(non modular) bricks of class
designation 7.5
Constructing masonry Chamber 90x90x100 cm inside, in
brick work in cement mortar 1:4 (1 cement : 4 coarse sand)
for sluice valve, with C.I. surface box 100 mm top diameter,
160 mm bottom diameter and 180 mm deep (inside) with
chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size ), i/c
138 18.34.1 necessary excavation, foundation concrete 1:5:10 (1 cement Each 6.00 13,754.86 82,529.15
: 5 fine sand : 10 graded stone aggregate 40 mm nominal
size ) and inside plastering with cement mortar 1:3 (1
cement : 3 coarse sand) 12 mm thick, finished with a floating
coat of neat cement complete as per standard design :With
common burnt clay F.P.S.(non modular) bricks of class
designation 7.5
Providing and fixing 600x450 mm beveled edge mirror of
superior glass (of approved quality) complete with 6 mm
thick hard board ground fixed to wooden cleats with C.P.
brass screws and washers complete.
Providing and fixing PTMT soap Dish Holder having length
140 18.65 of 138mm, breadth 102mm, height of 75mm with concealed Each 21.00 173.86 3,651.09
fitting arrangements, weighing not less than 106 gms.
Providing and fixing C.P. brass shower rose with 15 or 20
mm inlet : 100 mm diameter
Providing and fixing PTMT towel rail complete with
brackets fixed to wooden cleats with CP brass screws with
concealed fittings arrangement of approved quality and
colour600 mm long towel rail with total length of 645 mm,
width 78 mm and effective height of 88 mm, weighing not
less than 190 gms
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing C.P. brass stop cock (concealed) of
143 18.52.1 standard design and of approved make conforming to Each 16.00 992.10 15,873.55
IS:8931. 15 mm nominal bore
Sub Total (WATER SUPPLY AND SANITARY
ELECTRICAL WORKS -
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia
including accessories , and providing masonry enclosure with
cover plate having locking arrangement and watering pipe
etc. with charcoal / coke and salt as required
Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm
thick including accessories, and providing masonry enclosure
145 5.4 with cover plate having locking arrangement and watering Each 1.00 6,852.40 6,852.40
pipe of 2.7 meter long etc.but without charcoal / coke and
salt as required
Supplying and laying 6 SWG G.I. wire at 0.50 meter below
146 5.7 ground level for conductor earth electode , including Rm 20.00 30.88 617.61
connection / termination with GI thimble etc. as require
Supplying and laying 25 mm x 5 mm copper strip at 0.50
metre below ground as strip earth electrode , including
connection / terminating with nut , bolt, spring , washer
etc.as required. (Jointing shall be done by overlapping and
with 2 sets of brass nut bolt & spring washer spached at
Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter
below ground as strip earth electrode , including connection /
148 5.9 terminating with G.I. nut , bolt, spring , washer etc.as Rm 20.00 100.80 2,015.91
required. (Jointing shall be done by overlapping and with 2
sets of G.I.nut bolt & spring washer spached at 50mm)
Providing and fixing 25 mm x 5 mm copper strip on surface
or in recess for connections etc as require
Providing and fixing 25mm x 5mm GI.strip on surface or in
recess for connections etc . as required
Providing and fixing 4.00 mm dia copper wire on surface or
in recess for loop earthing as required.
Wiring or light point / fan point / exhaust fan point / call bell
per point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium
152 1.10.3 class pvc conduit , with modular switch, modular plate, Point 324.00 928.49 300,832.32
suitable GI box and earthing the point with 1.5 sq.mm FRLS
PVC insulated copper conductor single core cable etc.as
required - GROUP C
Wiring for twin control light point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface /
recessed medium class PVC conduit , 2 way modular switch ,
modular plate , suitable GI box and earthing the point with
1.5 sq.mm FRLS PVC insulated copper conductor single core
cable etc.as required
Wiring for group controlled (looped) light point / fan point /
exhaust fan point / call bell point (without indepdent switch
etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed PVC conduit , and
earthing the point 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable etc.as required - Group C
Supply and Fixing of meters for shops including cost of
material, labour etc., complete.
Supplying and fixing following modular switch / socket on the
156 1.24.1 existing modular plate & switch box including connections Each 46.00 75.17 3,457.64
but excluding modular plate etc. as required - 5/6 A switch
Supplying and fixing following modular switch / socket on the
existing modular plate & switch box including connections
but excluding modular plate etc. as required - 15/16 A
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Supplying and fixing following modular switch / socket on the
existing modular plate & switch box including connections
but excluding modular plate etc. as required - 3 pin 5/6 A
Supplying and fixing following modular switch / socket on the
existing modular plate & switch box including connections
but excluding modular plate etc. as required - 6 pin 15/16
A socket outlet
Supplying and fixing following modular switch / socket on the
existing modular plate & switch box including connections
but excluding modular plate etc. as required - Telephone
Supplying and fixing following modular switch / socket on the
existing modular plate & switch box including connections
but excluding modular plate etc. as required - TV antenna
Supplying and fixing following size / modules , GI box
162 1.27.1 alongwith modular base & cover plate for modular switches Each 10.00 220.87 2,208.72
in recess etc. as required - 1 or 2 module (75mm x 75mm)
Supplying and fixing following size / modules , GI box
163 1.27.2 alongwith modular base & cover plate for modular switches Each 10.00 242.40 2,423.96
in recess etc. as required - 3 module (100mm x 75mm)
Supplying and fixing following size / modules , GI box
164 1.27.3 alongwith modular base & cover plate for modular switches Each 15.00 263.09 3,946.39
in recess etc. as required - 4 module (125 mm x 75 mm)
Supplying and fixing following size / modules , GI box
165 1.27.4 alongwith modular base & cover plate for modular switches Each 15.00 322.85 4,842.72
in recess etc. as required - 6 module (200 mm x 75 mm)
Supplying and fixing following size / modules , GI box
166 1.27.5 alongwith modular base & cover plate for modular switches Each 15.00 370.35 5,555.32
in recess etc. as required - 8 module (125 mm x 125 mm)
Supplying and fixing following size / modules , GI box
167 1.27.6 alongwith modular base & cover plate for modular switches Each 10.00 433.67 4,336.74
in recess etc. as required - 12 module (125 mm x 125 mm)
Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of
recessed conduit as required. 20mm
Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of
recessed conduit as required. 25mm
Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of
recessed conduit as required. 32mm
Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of
recessed conduit as required. 40mm
Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of
recessed conduit as required. 50mm
Wiring for circuit/ submain wiring alongwith earth wire with
the following sizes of FRLS PVC insulated copper conductor,
173 1.14.1 single core cable in surface/ recessed medium class PVC Meter 100.00 143.17 14,316.94
conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm
Wiring for circuit/ submain wiring alongwith earth wire with
the following sizes of FRLS PVC insulated copper conductor,
174 1.14.2 single core cable in surface/ recessed medium class PVC Meter 1,996.00 170.12 339,560.72
conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Wiring for circuit/ submain wiring alongwith earth wire with
the following sizes of FRLS PVC insulated copper conductor,
175 1.14.3 single core cable in surface/ recessed medium class PVC Meter 351.00 203.51 71,433.62
conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth
Wiring for circuit/ submain wiring alongwith earth wire with
the following sizes of FRLS PVC insulated copper conductor,
176 1.14.4 single core cable in surface/ recessed medium class PVC Meter 100.00 273.94 27,393.70
conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth
Wiring for circuit / submain wiring alongwith earth wire with
the following sizes of FRLS PVC insulated copper conductor ,
177 1.14.8 single core cable in surface / recessed medium class PVC Meter 297.00 332.17 98,654.49
conduit as required - 4 X 4 sq.mm + 2 x 4 sq.mm earth
178 1096 Supply of 1200mm sweep double ball bearing ceiling fan Each 48.00 1,652.00 79,296.00
Installation, testing and commissioning of ceiling fan,
including wiring the down rods of standard length (upto 30
cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor,
single core cable etc as required
180 1098 Supply of 300mm 1400 rpm heavy duty exhaust fan Each 13.00 2,761.20 35,895.60
Installation of exhaust fan in the existing opening , including
181 1.50.1 making good the damage , connection , testing , Each 13.00 279.60 3,634.81
commissioning etc. as required - Upto 450 mm sweep
Supplying, Installation, testing and commissioning of
182 36Watt LED Ceiling light including cost of material, labour Each 30.00 2,950.00 88,500.00
etc., complete.
Supplying, Installation, testing and commissioning of
183 20Watt 4 Feet LED Tube Light including cost of material, Each 233.00 796.50 185,584.50
labour etc., complete.
Supplying, Installation, testing and commissioning of 2
184 1114 Tonne A.C 3 Star Rating including cost of material, labour Each 8.00 48,380.00 387,040.00
etc., complete.
Supplying, Installation, testing and commissioning of
185 1111 Geyser/Water Heater including cost of material, labour Each 2.00 8,260.00 16,520.00
etc., complete.25 ltrs. Storage water heater- ABS
Providing and laying non-pressure NP2 class (light duty)
R.C.C. pipes with collars jointed with stiff mixture of cement
mortar in the proportion of 1:2 (1 cement : 2 fine sand)
including testing of joints etc. complete - 300 mm dia.
Supplying and installing following size of perforated Hot
dipped Galvanised iron cable tray (galvanization thickness not
less than 50 microns) with perforation not more than 17.5%
, in convenient sections , joined with connectors , suspended
from the ceiling with G.I.suspenders including G.I.bolts &
nuts , etc .as required - 450 mm width
Supplying and installing following size of perforated Hot
dipped galvanised iron cable tray "bends" (galvanisation not
less than 50 microns) with perforation not more than 17.5%
188 4.7.6 , in convenient sections , joined with connectors , suspended Each 4.00 2,590.37 10,361.49
from the ceiling with G.I.suspenders including G.I. bolts &
nuts , etc.as required - 450 mm width x 50 mm depth x 2.0
Supplying and installing following size of perforated Hot
dipped galvanised iron cable tray "Tee" (galvanisation not
less than 50 microns) with perforation not more than 17.5%
189 4.8.6 , in convenient sections , joined with connectors , suspended Each 4.00 3,052.93 12,211.73
from the ceiling with G.I.suspenders including G.I.bolts &
nuts . As required - 450 mm width x 50 mm depth x 2.0 mm
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Supplying and installing following size of perforated Hot
dipped galvanished iron cable tray "Cross member"
(galvanisation not less than 50 microns) with perforation not
190 4.9.6 more than 17.5% , in convenient sections , joined with Each 4.00 3,052.93 12,211.73
connectors , suspended from the ceiling with G.I.suspenders
including G.I.bolts & nuts , etc .as required - 450 mm width x
50 mm depth x 2.0 mm thickness
Supplying and installing following size of perforated Hot
dipped galvanised iron cable tray "Reducer" (galvanisation
not less than 50 microns) with perforation not more than
191 4.10.6 17.5% ,in convenient sections , joined with connectiors , Each 4.00 4,469.24 17,876.95
suspended from the ceiling with G.I.suspenders including
G.I.bolts & nuts , etc.as required - 450 mm width x 50 mm
depth x 2.0 mm thickness
Supply and erection MS swaged tublar pole with base plate
and single ornamental bracket two coats coats of zinc
chromate and two coats of aluminium / epoxy painting. Pole
height-8 mt. Pole dimension 139.7 x 4.5 x 4500mm , 114.3 x
3.65 x 1750mm, 88.9 x 3.25mm x 1750mm, bracket
dimension 60.3 X 3.65mm x 2700mm - 1no, base plate
dimension 300mm x 300mm x 5mm, overall height - 9.5mts
including excavation of earth column- 750x 750 x1650mm
and cement concrete 1: 2: 4 of volume 750 x750 x 1650mm
filling and capping above ground level 450mm dia x 600mm
height. One coat of zinc chromate and two coat of aluminium
/ epoxy painting should be done after erection of the pole
and inclusive of suitable length 1.25mt.- 2 nos. of 40mm dia
medium class GI pipe for cable raising as required.
Supply and erection MS swaged tublar pole at top with base
plate and double ornamental bracket two coats of zinc
chromate and two coats of aluminium / epoxy painting. Pole
height - 8mt. Pole dimension - 139.7 x 4.5 x 4500mm , 114.3
x 3.65 x 1750mm, 88.9 x 3.25mm x 1750mm, bracket
dimension 60.3mm x 3.65mm x 2700mm - 2no, base plate
dimension 300mm x 300mm x 5mm. Overall height - 9.5mts.
193 17.2.7 including excavation of earth 750x 750 x1650mm and No 8.00 31,254.35 250,034.83
cement concrete 1: 2: 4 of volume 750 x750 x 1650mm
filling and capping above ground level 450mm dia x 600mm
height. One coat of zinc chromate and two coat of
aluminium/epoxy painting should be done after erection of
the pole and inclusive of suitable length 1.25mt.- 2 nos. of
40mm dia medium class GI pipe for cable raising
Supply and installation of 16 mtrs. High mast system with its
accessories mast shaft shall be in two sections , hot dip
galvanised (as per BS 729 or equivalent) and suitable for
wind velocity as per IS 875-1987 (180 km /hour). It shall
also include accessories for high mast including head frame,
194 17.3.2 stainless steel wire rope 6mm dia (7/19 construction) double No 1.00 422,179.42 422,179.42
drum per winch , which galvanized lantern carriage
arrangement suitable for 12 (twelve) luminaries
symmetrically and its motorised control gear boxes and
lighting final. (as per detailed technical specification as
shown in annexure - II)
195 1207 Supply of 48W LED Street Light Fitting No 56.00 6,525.40 365,422.40
Supply of 250w MH Street light aesthetically designed die
196 3068-O cast aluminium with POT optics and toughened flat glass No 12.00 6,766.12 81,193.44
Fixing testing and commissioning of Sodium vapour /
197 17.2.11 Mercury vapour / Metal halide street light fittings on existing No 68.00 803.16 54,614.55
poles as required
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Design, Supply, erection, testing and Commission of
11KV/433V, 250 kVA 3 phase HT Transformer with Oil
Temperature Indicator., Earthing terminals - 3 nos., Pre-filled
Silica-gel breather. Lifting lugs for complete transformer.
Thermometer pocket., Oil filling pipe with cap on tank
cover/conservator., HV TERMINALS with Porcelain Bushings,
LV TERMINALS Indoor Type Porcelain Bushings with LT Cable
box., Bi-metallic connectors on HT side., Oil level indicator on
the Oil Conservator., 4 set of wheels for movement., Drain
cum sampling valve - 1 no., Filter Valve with plug - 1 no.,
Pressure relief explosion vent with diaphragm, Externally
198 operated off circuit tap changer switch with handle including No - 855,500.00 -
all other accessories etc., complete; Rating (KVA) -250 KVA;
No Load Voltage Ratio [KV] -11 / 0.433 KV; Rated Current
[Amp] -13.12 /333.35 Amps; Vector Group -Dyn11 ; Tapping
Tap – Changer -Off Circuit Tap Changer; Steps -6 Steps, 7
Positions ; Temp. Rise (Oil/Wdg.) -40 / 45 °C; Insulation
Level -HV & LV: Uniform.; HV (KVp / KVrms) -75 / 28; LV
(KVp / KVrms) -NA / 3 TERMINATION: H.V / L.V Cable Box /
Cable Box; Paint- Epoxy to Shade 631 of IS 5; Oil
Temperature Indicator with A/T contacts Winding
Temperature Indicator with A/T contacts Buchholz Relay with
Supplying of 3 phase, 415 volts, 50 cycles, 0.8 power factor
for electric starting diesel generator comprising the following
units:- water cooled and shall be of multi stroke, multi
cylinders, cold starting, developing not less than154 BHP
under normal temperature and pressure. The engine shall
conform to I.S. 10002 with latest amendments. It shall be
capable of taking 10% over load for one hour in every 12
hours of continous operation including 6 Nos. of anti
vibration pads.The engine shall be complete with the
following accessories:Electrical starting provision, engine
cooling fan, fuel and lubricating oil filters, oil bath, air filter,
lub oil pressure gauge 250 litres capacity fuel tank mounted
with engine, hour meter with exhaust manifold, flexible pipe,
12 /24 volts electric starting equipment complete with
starter, alternator and two numbers of 12 volts with 21
plates battery of make (with Guarantee cards) of adequate
capacity and low lubricating oil pressure/high temperature
varying engine shut down devices.
The Acoustic enclosure shall have the following powder
coated and fabricated out of 16 SWG CRCA MS sheet. The
silent canopy shall be of nut bolt type construction. Powder
coating is done after seven tank surface preparation process
of sheet metal. Canopy panel and doors shall have inside
lining of FIRE-RETARDANT foam/Rock Wool as acoustic
material. Four hinged doors shall be provided to canopy, one
door shall have glass window for control panel.Base frame is
fabricated either in ISMC channel or in sheet metal. The base
frame is rugged in construction and designed for mounting
engine and alternator, with cross members mounted on
AVM. The base frame shall have provision for mounting of
acoustic enclosure and it is having provision of lifting hook
for convenient lifting of complete set, i.e. along with canopy,
engine and alternator.Fuel tank shall be fabricated out of 14
SWG CRCA MS sheet and is part of base frame. It is duly
painted and fitted with inlet and outlet connections of
suitable capacity.The Acoustic enclosure shall be Type test
approved as per CPCB norms. The average sound level,
when measure in green field condition (ISO m3744 OR 8528
PT 10) at 1-meter distance from all four sides shall be less
than 75-dBA average or as per CPCB norms. The average
stabilized hot air temperature rise with in the canopy is
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
ambient temperature.Acoustic enclosure is suitable for
Outdoor / Indoor installation. Lockable doors shall be
provided. Lockable fuel filling arrangement to be provided
external to the canopy. Residential Silencer is housed in the
canopy. The exhaust gasses shall be taken out through a
suitable flexible pipe to prevent any back pressure on the
engine.Base frame sturdy, fabricated welded consruction,
channel iron / sheet metal base frame for mounting the
above engine and alternator.Standard Tools and
Spares:Double ended spanners complete set (small and big
size sets) - 12 Nos. Screw driver (30cm long) Taparia make
.Screw driver (45cm long) Taparia make .Cutting plyer.Diesel
filter with elements - 2 Nos.Oil filter with elements - 1 No.All
the above accessories with complete set.AlternatorThe
alternator shall be of self excited, self regulated, screen
protected, drip proof alternator with static excitation system
capable of developing 125KVA at 0.8 ower factor 415 volts, 3
phase, 50 cycles, generally conforming to I.S.4722 under
normal condition, the voltage regulation will be
plus or minus 5% of rated voltage. It shall be with end
shield/ball roller bearings complete.Control PanelA
wall/pedestal mounting (cubical type) fabricated sheet steel
construction suitable for manual
Supply, Transportation operation,
unloading, rated for
installation, system
commissioning of Main EB Cutout Box comprising of the
followings and including all other accessories etc.,3 Nos 300
Amps Porcelain fuse carriers, 1 No, Neutral link, 1 No Earth
link, Suitable Incoming and Outgoing terminal to connect
cable and Busbars, in a suitable M.S Enclouser with proper
locking/ sealing arrangements
Supply, Transportation unloading, installation, testing and
commissioning of Main Panel comprising of the followings
and including all other accessories etc.,EB Incomer : 1 No
200A 4Pole MCCB, DG Incomer: 1 No 200A 4Pole MCCB,
Busbar: 160A TPN Aluminium Busbars 35KA per 1 Sec. All
the neutral busbars shall have half the capacity of phase
201 NS busbars, Outgoing : 3 Nos 63 A TPN MCCB with releases 2 Set 1.00 94,400.00 94,400.00
No 160 A TPN MCCB with releases 1 Set of RYB indication
lamp & 1 No Multi function meter Floor mounting type
fabricated with 16 SWG CRCA sheet enclosure. Door and
partition 18 SWG CRCA Sheet. The Panel shall be complete
with suitable interconnections and earthing etc. All doors
should have proper locking/ sealing arrangements.
Supply, Transportation unloading, installation, testing and
commissioning of Ground Floor EB Metering Panel-1
comprising of the followings and including all other
accessories etc.,3 Nos 63 A Porcelain fuse carrier, 1 No
Neutral link, 1 No Earth link, 1 set of RYB Indication lamp &
1No Multifunction meter, Burbar: 63A TPN Alumnium
Busbars, a) Compartment type outgoing 9 Nos -3 Phase.
Each outgoing shall have 1 metering portion with a provision
of 6mm thick hylem sheet to fix the E.B meter (3 Phase). 1
switch compartment shall have 3 Nos 32A porcelain fuse
carriers, 1 No 40A TPN MCCB, b) Compartment type outgoing
5 Nos - Single Phase. Each outgoing shall have 1 metering
portion with a provision of 6mm thick hylem sheet to fix the
E.B meter (1 Phase). 1 switch compartment shall have 2 Nos
16A porcelain fuse carriers, 1 No 16A DP MCB, The Panel
should be complete with suitable interconnections and
earthing etc., Floor mounting type fabricated with 16 SWG
CRCA sheet enclosure. Door and partition 18 SWG CRCA
Sheet. The Panel shall be complete with suitable
interconnections and earthing etc. All doors should have
proper locking/ sealing arrangements.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Supply, Transportation unloading, installation, testing and
commissioning of First Floor EB Metering Panel
comprising of the followings and including all other
accessories etc., 3 Nos 63 A Porcelain fuse carrier, 1 No
Neutral link, 1 No Earth link, 1 set of RYB Indication lamp &
1No Multifunction meter Burbar: 63A TPN Alumnium Busbars,
a) Compartment type outgoing 8 Nos-3 Phase. Each outgoing
shall have 1 metering portion with a provision of 6mm thick
203 NS hylem sheet to fix the E.B meter (3 Phase). 1 switch Set 1.00 118,000.00 118,000.00
compartment shall have 3 Nos 32A porcelain fuse carriers, 1
No 40A TPN MCCB, The Panel should be complete with
suitable interconnections and earthing etc., Floor mounting
type fabricated with 16 SWG CRCA sheet enclosure. Door
and partition 18 SWG CRCA Sheet. The Panel shall be
complete with suitable interconnections and earthing etc. All
doors should have proper locking/ sealing arrangements.
Supply, Transportation unloading, installation, testing and
commissioning of Second Floor EB Metering Panel
comprising of the followings and including all other
accessories etc., 3 Nos 63 A Porcelain fuse carrier, 1 No
Neutral link, 1 No Earth link, 1 set of RYB Indication lamp &
1No Multifunction meter, Burbar: 63A TPN Alumnium
Busbars, a) Compartment type outgoing 4 Nos -3 Phase.
Each outgoing shall have 1 metering portion with a provision
of 6mm thick hylem sheet to fix the E.B meter (3 Phase). 1
switch compartment shall have 3 Nos 32A porcelain fuse
carriers, 1 No 32A TPN MCCB, b) Compartment type outgoing
1 No - Single Phase. Each outgoing shall have 1 metering
portion with a provision of 6mm thick hylem sheet to fix the
E.B meter (1 Phase). 1 switch compartment shall have 2 Nos
16A porcelain fuse carriers, 1 No 16A DP MCB, The Panel
should be complete with suitable interconnections and
earthing etc., Floor mounting type fabricated with 16 SWG
CRCA sheet enclosure. Door and partition 18 SWG CRCA
Sheet. The Panel shall be complete with suitable
interconnections and earthing etc. All doors should have
proper locking/ sealing arrangements.
Supply, Transportation unloading, installation, testing and
commissioning of Phase Segregated DB MCB type 6 Way
comprising of the followings and including all other
205 NS accessories etc., Incomer: 1 No 40A TPN MCCB, Outgoing: 3 Set 3.00 28,320.00 84,960.00
Nos 32A DP MCB, 18 Nos 6/20A SP MCB, The Panel shall be
complete with iterconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and
commissioning of Power Distribution Board VTPN Type
8 Way comprising of the followings and including all other
206 NS accessories etc.,Incomer: 1 No 40A TPN MCCB, Outgoing: 8 Set 1.00 25,960.00 25,960.00
Nos 16/20/32A TP SP MCB, The Panel shall be complete with
iterconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and
commissioning of Power Distribution Board VTPN Type
4 Way comprising of the followings and including all other
207 NS accessories etc.,Incomer: 1 No 32A TPN MCCB, Outgoing: 4 Set 1.00 28,320.00 28,320.00
Nos 10/20 TP MCB / SP MCB, The Panel shall be complete
with iterconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and
commissioning of Phase Segregated 4Way DB
comprising of the followings and including all other
208 NS accessories etc., Incomer: 1 No 32A TPN MCCB, Outgoing: 3 Set 1.00 24,780.00 24,780.00
Nos 20A DP MCB, 12 Nos 6/16A SP MCB, The Panel shall be
complete with iterconnections and earthing etc.,
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Supply, Transportation unloading, installation, testing and
commissioning of LSB comprising of the followings and
including all other accessories etc.,Incomer: 1 No 40A 4P
MCB, Outgoing: 3 Nos 25A DP MCB, The Panel shall be
complete with iterconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and
commissioning of Distribution Board Horizontal type
MCB DB comprising of 1 No 32A 4 pole MCB as incomer and
3 Nos 25A DP MCB and 6 Nos 6/10/20 A SP MCB as outgoing
for shops and including all other accessories etc.,
Supplying and fixing 20 A, 240 V, SPN Industrial type socket
outlet , with 2 pole and earth , metal enclosed plug top along
with 20 A "C" curve , SP,MCB, in sheet steel enclosure , on
211 NS surface or in recess , with chained metal cover for the socket Set 30.00 1,169.64 35,089.19
out let and complete with connections , testing and
commissioning etc.as required. (Electrical SOR: Item
Supply, Transportation unloading, installation, testing and
212 NS commissioning of 30 KVAR Capacitor and including all Set 1.00 20,060.00 20,060.00
other accessories etc.,
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia
including accessories , and providing masonry enclosure with
213 NS cover plate having locking arrangement and watering pipe Set 6.00 6,003.79 36,022.76
etc. with charcoal / coke and salt as required. (Electrical
SOR: Item No:5.2)
Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm
thick including accessories, and providing masonry enclosure
with cover plate having locking arrangement and watering
pipe of 2.7 meter long etc.but with charcoal / coke and salt
as required. (Electrical SOR: Item No:5.4)
Supplying and laying 25 mm x 5 mm copper strip at 0.50
meter below ground as strip earth electrode, including
connection / terminating with nut , bolt, spring , washer
215 NS etc.as required. (Jointing shall be done by overlapping and Meter 150.00 699.95 104,992.86
with 2 sets of brass nut bolt & spring washer spached at
50mm) (Electrical SOR: Item No:5.8)
Providing and fixing 4.00 mm dia copper wire on surface or
216 NS in recess for loop earthing as required (Electrical SOR: Item Meter 200.00 105.41 21,081.88
Supply and transportation of following XLPE insulated, 1100V
217 NS grade armoured alluminium cable as per specification - - -
confirming to IS:7098 (Part-I)./1554-I
Laying of one number PVC insulated and PVC sheathed /
XLPE power cable of 1.1 kV grade of following size direct in
218 NS ground including excavation , sand cushioning, protective Meter 685.00 414.71 284,077.04
covering and refilling the trench etc.as required - Upto 35
Laying of one number PVC insulated and PVC sheathed /
XLPE power cable of 1.1 kV grade of following size direct in
219 NS ground including excavation , sand cushioning, protective Meter 25.00 426.23 10,655.70
covering and refilling the trench etc.as required - above 35
sq.mm and upto 95 sq.mm
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Laying of one number PVC insulated and PVC sheathed /
XLPE power cable of 1.1 kV grade of following size direct in
220 NS ground including excavation , sand cushioning, protective Meter 225.00 437.74 98,492.54
covering and refilling the trench etc.as required - above 95
sq.mm and upto 185 sq.mm
Laying and fixing of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 kV grade of following
size on wall surface as required - upto 35 sq.mm (clamped
with 1mm thick saddle)
Laying and fixing of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 kV grade of following
size on wall surface as required - above 35 sq.mm and
upto 95 sq.mm (clamped with 25 x3mm MS flat clamp)
Laying and fixing of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 kV grade of following
223 NS size on wall surface as required - above 95 sq.mm and Meter 25.00 104.39 2,609.87
upto 185 sq.mm (clamped with 25 / 40 x 3mm MS flat
Laying and fixing of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 kV grade of following
size on cable tray as required - upto 35 sq.mm (clamped
with 1 mm thick saddle)
Laying and fixing of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 kV grade of following
size on cable tray as required - above 35 sq.mm and upto
95 sq.mm (clamped with 1 mm thick saddle)
Laying and fixing of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 kV grade of following
size on cable tray as required - above 95 sq.mm and upto
185 sq.mm (clamped with 25 / 40 x 3mm MS flat clamp)
Supplying and making cable route marker with cement
concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone
227 NS aggregate 20 mm nominal size) of size 60 cm x 60 cm at the Per no 25.00 441.32 11,033.00
bottom and 50 cm x 50 cm at the top with a thickness of 10
cm including inscription duly engraved as required.
Supplying and making end termination with brass
compression gland and aluminium lugs for following size of
PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 kV grade as required - 2 X 6 sq.mm (19mm)
Supplying and making end termination with brass
compression gland and aluminium lugs for following size of
PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 kV grade as required - 2 X 10 sq.mm (19mm)
Supplying and making end termination with brass
compression gland and aluminium lugs for following size of
PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 kV grade as required - 4 X10 sq.mm (25 mm)
Supplying and making end termination with brass
compression gland and aluminium lugs for following size of
PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 kV grade as required - 4 X16 sq.mm (28 mm)
Supplying and making end termination with brass
compression gland and aluminium lugs for following size of
232 NS PVC insulated and PVC sheathed / XLPE aluminium conductor Per set 2.00 135.38 270.76
cable of 1.1 kV grade as required - 31/2 X25 sq.mm (28
Supplying and making end termination with brass
compression gland and aluminium lugs for following size of
233 NS PVC insulated and PVC sheathed / XLPE aluminium conductor Per set 2.00 164.20 328.39
cable of 1.1 kV grade as required - 31/2 X35 sq.mm (32
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Supplying and making end termination with brass
compression gland and aluminium lugs for following size of
234 NS PVC insulated and PVC sheathed / XLPE aluminium conductor Per set 4.00 172.87 691.48
cable of 1.1 kV grade as required - 31/2 X50 sq.mm (28
Supplying and making end termination with brass
compression and PVC sheathed / XLPE aluminium conductor
cable of 1.1 kV grade as required - 31/2 X70 sq.mm (38
Supplying and making end termination with brass
compression gland and aluminium lugs for following size of
236 NS PVC insulated and PVC sheathed / XLPE aluminium conductor Per set 4.00 262.66 1,050.62
cable of 1.1 kV grade as required - 31/2 X150 sq.mm (50
Sub Total (Electrical Works) - 9,149,118.53
FIRE FIGHTING SYSTEM 0 -
Supplying, installing, testing and commissioning of zone
selector P.A. console and with CRCA sheet housing,with
necessary input ,output devices and control desk( rack) as
required. Console shall have all call / call back facility
complete with battery back up and it should also work on AC
single phase power.The panel shall have intigration facilty
with BMS and also voice evacuation system with intigration
facility with PA and FA Panel (12 Zone)
Supplying, installing, testing and commissioning solid state
238 NS Amplifier out put in rack, including neccessory control wires, Nos 1.00 31,052.63 31,052.63
jacks etc. complete. 100 W amplifier
Supplying, installing, testing and commissioning 40 strand
239 NS twin core control cables of PVC insulated copper conductor, Rmt 150.00 114.27 17,141.05
Confirming to IS 1554, as per specification.
A) Supplying, installing, testing and commissioning approved
make 25mm P.V.C. conduits on ceiling / wall / floor etc.
complete with accessories like, Junction boxes, Collars,
Supplying, installing, testing and commissioning of
CONVENTIONAL TYPE Fire Alarm Control panel with battery
back up for 8 hours normal operation and 15 minutes alarm
operation. The control panel, battery charger and necessary
accessories, etc, shall be UL listed.The panel shall be Below
241 NS mentioned capacity, The panel shall consisting with 80 LS 1.00 44,094.74 44,094.74
character LCD display and RS 485 for networking. with
suitable Standard mounting Rack, The panel shall have
intigration facilty with BMS and also intigration facility with
PA Panel etc complete in all respects as per detailed
specifications (16 Zone)
Supplying, installing, testing and commissioning of
convetional Manual pull station having an integrally mounted
242 NS MCP, HOOTER & P.A SPEAKER-6 Watts (Two way talk back). Each 6.00 9,315.79 55,894.74
(3 in 1 type). Rate quoted shall include providing, fixing as 3
in 1 approved make Box.
Supplying, installing, testing and commissioning of
243 NS convetional type Hooter with with necessary mount ing Each 6.00 1,552.63 9,315.79
accessories etc.
Supply, testing and commissioning of 1100V Grade 2 core x
1.5 sqmm PVC insulated FRLS armoured cable for
connecting detectors / devices to panels and main micro
processor control panels located in the respective floors
including end termination with indentification tags at each
end, etc., complete.The quoted rates shall be inclusive of
necessary juntion boxes made of M.S 16 SWG with cutouts
for incoming & outgoing cables in respective floors.
b) Supplying, installing, testing and commissioning approved
make 20 mm dia. P.V.C. flexible conduits on ceiling / wall /
floor etc. complete with accessories like, Junction boxes,
Collars, Bends etc.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Supply, Erection, testing & commissioning of electrical
motor driven Hydrant Pump of horizontal centrifugal
end suction backpull out type with gland packing and
capable to deliver 2280LPM (137 m³/ Hr) at 60 MWC
with all necessary accessories like bronze impeller, stainless
steel shaft and mechanical seal along with anti-vibration
mounting, coupling, coupling guard and base plate for
pump, fabricated mild steel channel,foundation bolts, and
246 NS pump should have the dry run sensor provision, etc., as per Nos 1.00 637,790.00 637,790.00
local fire brigade requirement . The pump shall capable to
have 3.5 kg/cm² residual pressure at top most hydrant point.
The pump shall be coupled to electrical motor of 65 HP with
speed of 2900 RPM, Electric supply 415V, 50 Hz and
complete set shall be mounted on a common base frame.
The quoted rate shall includes providing & fixing of coupling,
coupling gaurd and Foundation bolts etc. RCC foundation is
under civil scope.
Supply, Erection, testing & commissioning of Diesel Engine
driven common stand by pump, horizontal centrifugal
end suction backpull out type with gland packing and
capable to deliver 2280LPM (137 m³/ Hr) at 60MWC
with all necessary accessories like bronze impeller, stainless
steel shaft and mechanical seal along with anti-vibration
mounting, coupling, gear box, base plate for pump,
fabricated mild steel channel with foundation bolts etc., It
includes providing and fixing fuel oil tank (capacity as per
TAC requirements) with supports and necessary pipe works
for diesel engine, battery and battery charger to be
247 NS connected to control panel of diesel engine and exhaust Nos 1.00 814,200.00 814,200.00
silencer including necessary pipe work and lagging, pump
should have the dry run sensor provision, etc., and shall be
automatic in operation diesel engine control panel with 24V
DC storage battery & its battery charger with required
Ampere - hour rating, terminal box (2 nos. of 12volts),
cooling water line for engine with required pipes / valves /
fittings etc., as per TAC including all associated electrical
works. The pump shall capable to have 3.5 kg/cm² residual
pressure at top most hydrant point. The pump shall coupled
to Diesel engine, radiator water cooled type with speed of
1800RPM and complete set shall be mounted on common
Supply, erection, testing & commissioning of electrical
motor driven Jockey pump of horizontal centrifugal
end suction back pull out type with gland packing and
capable to deliver 180LPM (10.8 m³/ Hr) at 60 MWC
with all necessary accessories like bronze impeller, stainless
steel shaft and mechanical seal along with anti-vibration
mounting pad and flexible connections at discharge end of
the pipes, pump should have the dry run sensor provision
etc. and shall be automatic in operation.The pump shall be
coupled to motor of 15 HP with speed of 2900RPM and
complete set shall be mounted on common base frame. The
quoted rate shall includes providing & fixing of coupling,
coupling gaurd and Foundation bolts etc. RCC foundation is
under civil scope.foundation is under civil scope
Fabrication, Supplying, Installation, Testing & Commissioning
of electrical control panel, of cubical construction, floor
mounted type, fabricated out of 2mm thick CRCA sheet,
compartmentalised with hinged lockable doors, dust and
vermin proof, powder coated of approved shade after 7 tank
treatment process, cable alley, inter-connection, having
switchgears and accessories mounting and internal wiring,
earth terminals, numbering etc. complete in all respects,
suitable for operation on 415 V, 3 phase, 50 HZ. AC supply
with enclosure protection class IP 42 as required.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Diesel Engine Control.
Control for Diesel Engine comprising:-
(i) Auto/Manual selector switch & 3 attempt starting
device, timers and relays as required, push buttons,
start/stop in manual mode.
(ii) Indication lamp for High/Low Lub.oil pressure, High
Water Temp.and Engine ON indication.
(iii) Battery charger suitable for 12 V/ 24 V DC with boost
and tickle selector switch, 0-30 V DC'<volt meter, 0-20A DC
(iv) AII standard relays and accessories for automatic
operation of diesel engine.
Supplying, laying, testing & commissioning of FRLS, XLPE
insulated, PVC outer sheateh, steel armoured, aluminium /
copper conductor, 1100v grade power cables with glands etc.
The cables shall be laid in tray / Hume pipe / in trenches/on
251 NS walls/ floor etc. as required. For cables laid out door the rate - - -
shall include earth excavation providing brick and sand
protection, refilling and compacting the earth.The rate shall
excludes tray & Hume pipes.The minimum size of the cables
shall as mentioned below,
a) 2R x 3.5 core x 50 sqmm Aluminium conductor cable for
Electrical motor Driven pump.
b) 4 core x 16 sqmm Aluminium conductor cable for Jockey
c) 12 core x1.5 sqmm Copper cable for Diesel Engine pump Mtr 10.00 614.84 6,148.42
d) 2 core x 1.5 sqmm Copper cable for pressure switch Mtr 20.00 300.59 6,011.79
e) 4 core x 2.5 sq mm Copper cable for MCC to ESP
Supplying and fixing of perforated G.I.sheet cable tray with
neccessory angle iron suspension supports, anchor fasteners
252 NS etc. complete. Maximum height of suspension shall not Rmt 20.00 1,329.05 26,581.05
exceed 500 mm.Size of the tray shall be suitable for laying
the above mentioned cables.
Supply, fixing, testing and commissioning of electronic type
level indicaor of approved make with pressure transducer,
alarm,sensors, LED display for indicating high, half full and
low level in sump (ground level reservoir) Rate quoted shall
253 NS include for supply and laying necessary armoured control Set 1.00 40,492.63 40,492.63
cablling inside pumphouse (approx. length 30 meters) for
connecting sensors to panels located inside pumphouse,
wiring from the control panel to sensor probes, ON / OFF
indicators etc. complete in all respects.
SLUICE VALVES : Tank outlet - - -
Supply, install, testing & commissioning of CI sluice valves of
approved make as per IS 780 Class I with necessary flanged
tail piece, compansion flanges, bolts, nuts, gaskets,
etc.,complete in all respects. PN 10 rating valve
Supply, Installation , Testing & Commissioning of MS
255 NS Fabricated Pot/Basket Strainer with accessories etc., - - -
NON RETURN VALVE: - - -
Supply, Installation , Testing & Commissioning of NON
RETURN VALVE with accessories etc., complete.-PN16
SLUICE VALVE: - - -
a) Supplying, Installing, testing and commissioning CI Sluice
valves as per BS 5155 ( PN 16) slim seal standard lever
operated type with required flanges, nuts, bolts etc.
BUTTERFLY VALVE - - -
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
b) Supplying, Installing, testing and commissioning CI
butterfly valves as per BS 5155 ( PN 10) slim seal standard
Gear operated type with required flanges, nuts, bolts etc.
complete. (For Delivery Header)
FLOW METER: - - -
a) Supplying, Installing, testing and commissioning of Flow
259 NS meter with necessary accessories as per standard - - -
specifications etc complete.
Supplying, installing, testing and commissioning of Gun metal
chrome finished Ball valves with fittings of screwed end type.
25 mm nominal dia (for pressure switch manifold & air vessel
Supply and installation of differential Pressure switches of
suitable range (0 to 12 bar) for pumpsets complete with
necessay Ball valves, Fittings like unions / colors / reducers
Supply and installation of Pressure gauges of suitable range
(0-16 bar), 110 mm diameter dial for pumpsets completes
with necessary Ball valves, siphon, Fittings like unions /
colors / reducers etc.
Supply, fixing, testing and commissioning of air vessel tank
shall be fabricated out of of 250 mm dia MS pipe to 1000
mm long complete with 25mm inlet, 25mm drain, 25mm dia
263 NS connection for air release valve including legs, painting with Nos 1.00 30,090.00 30,090.00
red oxide primer and finished with fire red enamel paint. It
shall be inclusive of all relevant pipes, valves, specials upto
pump header and other accessories etc.
Exhuast pipe for Diesel engine of 100 mm dia M.S. Medium
grade with mineral wool insulation with aluminum sheet. The
264 NS quoted rate shall include 100 mm diameter MS pipe medium Rmt 15.00 1,239.00 18,585.00
grade conforming to IS 1239 Part-1 and mineral wool
insulation with aluminum sheeting and Pipe supports also.
Supplying, installing, testing and commissioning of G.I Pipes,
ERW confirming to IS 1239 Pt - I Class 'C' Heavy grade up to
150mm dia and pipes 200mm dia and above shall be G.I as
per IS: 3589 (6mm Wall thick) with painting, suitable type
of supports, anchor fasteners, bolts nuts (Galvanised),
clamps, "U" bolts, malleable specials such as Reducers,Tees,
elbows, flanges. Including cutting, Welding, fixing in / on
walls, ceiling by using suitable supports etc, complete.
PIPE TO EXTERNAL YARD HYDRANT -
Rate quoted above shall include providing M.S.supports in
angle iron / plates pipes etc. at every 2.5 m c/c. Rate quoted
shall include for supply and providing necessary, welding
cutting, 'U' clamps both nuts, washers etc.as per specification
or pipe supports for horizontal / vertical pipes running along
wall / column, slabs trenches etc to suit different dia pipes
made of GI/MS rods, flats etc. consists of strap, nuts
washers, threaded rod etc., rate quoted shall also include
necessary aniti corrosive painting and 2 coat f approved
enamel colour paint
Supplying, Installing, testing and commissioning CI butterfly
valves as per BS 5155 ( PN 10/16) slim seal standard lever
operated type with required flanges, nuts, bolts etc.
b) 100 mm dia. (Shaft riser and Terrace) Each 6.00 2,593.52 15,561.09
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Supply, fixing, testing and commissioning of Air release
268 NS valves screwed ends of approved brand of manufacture, with -
accressories,etc complete
Supplying, installing, testing and commissioning of heavy
269 NS duty Gun Metal gate valves screwed ends of approved brand -
of manufacture.PN-10
Supply, fixing, testing and commissioning of Non return valve
270 NS falnged end of approved brand of manufacture, with - - -
accressories,etc complete. PN:10
a)1 Nos. 63 mm dia female instantaneous pattern oblique
271 NS SINGLE outlet hydrant valve with chain and cap of GM Nos 7.00 7,471.26 52,298.84
b)2 Nos. 63 mm size RRL as per IS 636 Type I (ISI mark) 15
272 NS Mtrs long with 63 mm gunmetal male and female Nos 7.00 10,049.87 70,349.12
instantaneous coupling.
c) 63 mm Gunmetal branch pipe with hexagonal detachable
16 mm nozzle, made instantaneous coupling etc. complete.
d) Hose reel drum with 19 mm dia bore reinforced rubber
hose of length 40 Mtrs length fitted with 6.35 mm dia.
274 NS nozzle. The hose reel drum shall be recessed swinging type Nos 7.00 10,606.34 74,244.36
with reel drum hose provided with coupling as per detailed
e) Internal hose cabinet frame (1200 x 900 x150) fronted
with hinged & lock made out of 16 G M.S. sheet with
powder coated paint of to suit internal fire duct opening to
accommodate the following accessories as mention above :-
a) 80 mm dia GI MSDF bend.80 mm dia GI MSDF stand pipe
(1 Mtr below + 1 Mtr above).The pipe portion below ground
shall be with anti corrosive treatment as per detail
b) 1 No. 63 mm dia female instantaneous pattern oblique
hydrant valve with chain and cap of gun metal
c) 2 Nos. 63 mm size C.P. Hose as per IS 8423 Type I (ISI
278 NS mark) 15 Mtrs long with 63 mm gun metal make male and Nos 9.00 12,392.48 111,532.36
female instantaneous coupling.
d)63 mm gun metal branch pipe with gun metal hexagonal
279 NS detachable 16 mm nozzle, made instantaneous coupling etc. Nos 9.00 2,136.42 19,227.79
e) M.S. Hose cabinet stand mouted type fabricated out of
M.S. sheet of 16 swg. with glass fronted ( 4mm thick glass
with rubber beeding) door and size of the cabinet shall be
280 NS 600mm x 750 mm x 250 mm Quoted rate shall be Nos 9.00 8,014.06 72,126.57
includes suitable stand for mounting, all fasteners etc, and
cabinet shall be powder coated of approved colour both
inside and out side.
a) TERRACE PUMP: Supply and fix terrace level 1 no of
monoblock pump of capacity 450 LPM 35 Mtrs head with
suitable electrical driven motor, suction and delevery side
281 NS Butterfly valve, non return valve, pressure guage, LS 1.00 67,135.79 67,135.79
switches,cables,wires and necessary acessories etc.
complete as per specification.The pump shall be with IP 55
b) TERRACE PUMP PANELS AND ACCESSORIES: Supply,
storing, erection, testing and commissioning of wall mounted
control panel with SFU's, DOL starter, indicating lamps, push
buttons, , necessary connecting cables, etc as per detailed
specification. The panel shall have IP 55 protection and
provision to BMS intigration. etc., complete.
a) 4 nos. 63 mm dia Gun metal instantaneous inlet arranged
on a 150 mm dia GI header with flanges. b) 1 No. 150 mm
283 NS non-return valves.- (PN16) c) 1 no of 150 mm dia Butterfly LS 1.00 16,604.46 16,604.46
valves ( PN16) Insitu moulded. d) 1 no of 100 mm dia
Butterfly valves( PN16) Insitu moulded
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Signage with printed "IN CASE OF FIRE, USE STAIRS
UNLESS INSTRUCTED OTHERWISE" of 1.5cm height letters
284 NS in red with white back ground.The size of the board shall be Nos 2.00 558.95 1,117.89
25cm x 30 cm and shall be fixed at the height of 2 mts. from
finished floor near Manual call points.
Floor indentification signage ( ie, GROUND FLOOR …etc.) at
each stair enclosure on every floor, indicating the floor
285 NS number in words, lettering size shall be 7.5 cm with Nos 2.00 496.84 993.68
contrasting colour from back ground.Size shall be 15cm x
Providing and fixing in position the signages " FIRE ORDER"
it should contain the following matter on 3mm thick
"Opaque" PVC foam board of computerised cut, PVC non-
reflective self adhesive vinyle painted foam board of 3' x 4'.
Action by security/reception upon receipt of information
through fire alarm orfire detectors or by using public address
system. a) alert the occupants by using public address
287 NS system. b) inform fire control through any one of the Nos 2.00 3,105.26 6,210.53
following phone numbers: 101 / local nos. c) refer
evacuation plan from evacuating standard people. d) guide
the fire force, on their arrival to the seat of fire.
Supply and install in position approved make ABC Stored
pressure type Fire Extinguisher of 2 kgs capacity, fitted with
discharge control valve (sq.grip type) CE marked and
pressure gauge, filled with mono ammonium phosphate
powder as per EN 3 615 approval, with discharge hose and
open nozzle and supplied complete with initial charge as per
IS: 15683 with ISI mark and wall bracket. Fire Rating 3A,
Supply and install in position approved make Water Stored
pressure type Fire Extinguisher of 9lit capacity, fitted with
discharge control valve ( Sq.grip type ) CE marked and
pressure gauge, with discharge hose and open nozzle and
supplied complete with initial charge as per IS: 15683 with
ISI mark and wall bracket. Fire Rating 2A
Supply and install in position approved make Co2 type Fire
Extinguisher of 2kgs capacity, made from brand new
seamless drawn steel cylinder as per IS: 7285 with ISI mark
and Chief of controller of explosives approval, fitted with
wheel/sq.grip valve as per IS: 3224 with ISI mark, with
discharge bend and horn and supplied complete with initial
charge as per IS: 15683 with ISI mark and wall bracket. Fire
Rating 8B or 13B
Providing ,fixing , testing and commissioning of Portable
Carbon-di-oxide Gas Type Fire Extinguisher 4.5 Kgs, squeeze
Grip,Controllable discharge mechanism with nozzle, bend,
Hose and wall mounting bracket etc.The Can is made of
291 NS Seamless Clinger and External Coating done by Spray Each 4.00 9,135.68 36,542.74
Painting.The thickness shall not less than 4.5 mm made of
Sheet metal.The Fire Extinguishers shall be ISI Approved as
per IS 15683:2006.Vendor shall consider the suitable
signages along with the extinguishers.
Sub Total (FIRE FIGHTING SYSTEM) - 5,886,011.16
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITITES
Item No Description of Item Unit Quantity Rate Total Amount
Item No Description of Item Unit Quantity Rate Total Amount
Make : Cri or Equivalent ; Flowrate : 1500 Lph Inlet / Outlet :
25mm ; Type : Monoblock 1hp
PRESSURE SAND FILTER: ; Make : PENTAIR or Equivalent ;
Flow rate : 1500 Lph ; Material of Construction : FRP Inlet /
Outlet Connection : 25 mm ; Multi port Valve Size : 25 mm ;
Media : Pebbles & Sylex and Sand.
ACTIVATED CARBON FILTER: Make : PENTAIR or Equivalent
; Flow rate : 1500 Lph ; Material of ; Construction : FRP ;
Inlet / Outlet Connection : 25 mm; Multi port Valve Size : 25
mm ; Media : Cocount Shell Activated Carbon & ; Pebbles.
MICRON FILTER: Flow rate : 1500 Lph ; Material of ;
Construction : Polypropylene ; Inlet / Outlet Connection : ¾”
mm ; Number of Cartridges : 2 Nos. of 20” Long ; Number of
Housing : 2 Nos. ; Working Pressure : 2 to 3 Kg / Sq. cm ;
Filter Elements : 5Wound PP.
RO PLANT FRAME: Skid : Stainless Steel (SS 202 Grade) ;
Thickness of square pipe : 1 inch ; Thickness of sheet : 1.2
mm ; Method of cutting : Laser. ; Membrane: ; Material of
Construction : Thin Film Composite ; Make : (
FILMTEC/Brackish/Hydranatics ) ; No. of Membranes : 2 Nos.
Dimension : 40” x 40”; Type of membrane : Sprial Wound.
HIGH PRESSURE PUMP: Material of Construction : SS 304 ;
Sub Total (RO Plant) - 385,860.00
Total Amount = 157,480,465.00
Total Amount = 157,480,465.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2022.09.30 14:53:00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT.pdf
Tender Document
GCC Contracting 2019.pdf
Tender Document
SCC.pdf
Tender Document
Integrity Pact.pdf
Tender Document
List of Approved Makes.pdf
Tender Document
TECHNICAL SPECIFICATIONS.pdf
Tender Document
TENDER DRAWINGS.pdf
Tender Document
BOQ.pdf
Tender Document
corrigendum-1089-Corrigendum 03.pdf
pdf • 0.06 MB
corrigendum-1050-Corrigendum 02.pdf
pdf • 0.06 MB
corrigendum-1044-Corrigendum 01.pdf
pdf • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .