SDP-Nilackal-Providing CC paver blocks to the entry and exit of Parking Lots No. 2 AND 4 for the smooth movement of vehicles and parking-reg

OD67926/2026-2027:Engaging Front end loader 1 cum bucket capacity (incl POL) for removing vegetation and in equalities , dressing and levelling the ground to the required profile and disposal of excavated rubbish and surplus material as directed by Engineer-in-charge.

OD39171/2026-2027:Providing and laying factory made chamfered edge cement concrete paver blocks in footpath , parks, lawns drive ways or light traffic parking etc, of required strength , thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick compacted bed of 6mm stone, aggregate, compacting and proper embedding/ laying of interlocking paver blocks into the bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc. all complete as per direction of Engineer-in-charge: 80 mm thick C.C paver block of M-30 grade with approved colour design and pattern.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

4.11.2:Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. (ii) Using Gravel mix soil.