Others

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them within 100 area less than 3.0 Sqm

Providing post construction anti termite treatment by drilling 1/2-inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Litres of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one later per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e., Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges etc for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment TBSC-Q.VI-23

Brick Masonary 2nd Class Ground moulded or traditional size 23x11x7 Cm in Cement Mortor 1:6 Prop including cost & conveyance of all materials like Cement, Sand, Bricks, Water, etc., including all labour charges like mixing Cement Mortor, scaffoding charges lift charges, curing charges etc., complete for finished item of work.

BLD-CSTN-8-10-(85) : Plastering 12mm thick in two coats with base coat of 8mm thick in C.M. (1:5) and top coat of 4mm thick in C.M. (1:3) with dubara sponge finishing including cost & conveyance of all materials like cement, Sand , Water, etc., to site, seigniorage charges, all operational, including charges, labour charges for mixing mortar, finishing, scaffolding, lift charges, curing , including cutting grooves where ever necessary etc., complete for finished item of work of uneven surfaces of walls. (Internal walls)

Providing and applying (two coat component acrylic polymer modified elasto meric waterproofing membrane which consists of Brushbond powder and brushbond liquid acrylic emulsion ) for a minium 2mm thickness coating. Work shall be executed as per manufactures specification and instructions.

Providing specialized high performance acrylic polymer modified elastomeric cementitious waterproof coating to the terrace / walls / internal portion of the bathroom & toilets / internal portion of the water tanks duly cleaning of the surface from dirt, dust and other contaminations, providing and application of Two coats of High performance Acrylic polymer modified Elastomeric cementitious waterproof coating ( 1.8 Sq. Mtr. / Kg /Each Coat )

Providing Integral Cement Waterproofing Liquid to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proo fing compound as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

BLD-CSTN-17-10 (328) Providing and laying cinder concrete in cement cinder mix (1:15) prop. using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyance of all materials, water to work site, seigniorage charges and all operational, incidental, labour charges, such as mixing cement & cinder etc. complete for finished item of work.

BLD-CSTN-3-11-(28) Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M20 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine Crushed Graded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement

Flooring with double charges / multi charges stain free full body porcelain vitrified tiles screen printed and polished of size 600 x 1200 mm and thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing skirting to internal walls to 15 cm height/risers of steps with ceramic tiles 7.30 mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including all charges, etc., complete for finished item of work,

Dadooing to walls with digital/ Polished glazed full body procelain vitrified tile with any type of design of size 600 x 1200 mm of 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed nealty with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tiles etc complet, including seigniorage charges etc complete,etc complete for finished item of work., (APSS No.701 & 707)

BLD-CSTN-9-5-(103): Flooring with Non-skid red or white full body Ceramic floor tiles of scratch free-stain free and scratch free-nano finish of size 600 x 1200 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs and with borders as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) TBSC-C.II-20

BLD-CSTN-9-7-(105) : Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black / premium colours slabs set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including seigniorage charges, labour charges for dressing of tilesetc., complete for finished item of work, including the cost and conveyance of all materials.) over Platform & window sills

Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same.

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1993 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat including overheads and contractor profit,all taxes except GST etc., complete for finished item of work.

Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item of work in all floors for Internal walls

Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint Interior Grade having VOC (Volatile Organic Compound) content less than 30 grams/litre for internal walls of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for Internal walls

Supply and making of Single laminate Partition of Alluminium Paneling using 50mm *25mm for frame work ,12mm thick plywood fixed on both side of the surface of the frame work and using 1mm thick laminate sheet of approved make on both the faces of plywood panel,including cost and conve yance of all materials including all labour charges etc to complete the finished item of work

Supply and making of laminate Double Partition of Alluminium Paneling using 50mm *25mm for frame work ,12mm thick plywood fixed on both side of the surface of the frame work and using 1mm thick laminate sheet of approved make on both the faces of plywood panel,including cost and conve yance of all materials including all labour charges etc to complete the finished item of work

Supply and Fixing of Single Glazed Partition made of 10mm thick toughened glass. The panels are supported by natural anodized aluminium Ground profile in 45x25mm (H), and connected to 45x25mm (H) Ceiling profile attached to the suspended false ceiling. The Ground & Ceiling Profile is supported by Foam Tape KL 009 at thebottom for Undulation in Ground & Ceiling. On the vertical edges the glass panels are wrapped around with KL 002 Vertical profile in 45x25mm . 1 mm x 7mm Clear Silicon tape is used for glass to glass joints( Glass to Glass Joining with KL 007 'I' Profile is available) .The glass to glass joint at the corner to have KL 005 90°corner profile & KL 006 135°corner profile. The glass to glass joint at the 'T' Junction to have KLIO 004 'T' Profile. The KL 005 & KLIO 004 Profile is supported by Internal Tape KL 011 for better Accoustics.

Supply and Fixing of Single leaf glass Door of SINGLE LEAF STYLED GLASS DOOR SYSTEM, Door Frame of size 92x44mm made of Natural Anodized Aluminum, Action : Single, Construction : 10mm thick Toughened Glass door shutter with KL 0045 Aluminum Frame of size 75x40mm made of Natural Anodized Aluminum, Hinge Type : 4 Nos Butterfly Hinges, Lock Set : Dead Lock, Door Handle : Offset D hanfle, Door Closer : Surface mounted door closer, Door Stopper :Floor Mounted Magnetic Stopper, Hardware Make : GEZE/Equivalent.

Providing And Laying of Vinyl Stickering on glass Partition .

Providing and making of storage units with Top, Bottom, Vertical supports, Doors and back support made completely of 18mm Green Plyclub Company (BWP grade) and pasting of 1mm Laminate (Greenlam company) with Adhesive for inside and outide on the entire plywood surface for smoother finish with SS 150mm handles, Auto closing Hinges as per design including materials labour and transport to Finish as per directions of the Engineer in Charge.

WPC DOOR and Frame Assembly.Supply and fixing of factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100 *65 MM with with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical mem bers are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast. 30mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fiber), and the remaining 15% additives, the door shutter shall be water resistant, fire resistant and termite resistant,with Tensile Strength not less than 170 Kgf/cm2 and the door shutters surface finished deco paint etc., complete including cost of hinges, latches, aldrops etc., as per the directions of engineer in charge.

Supply of Venetian blinds 100mm wide with all accessories TBSC-R.I-10

Supply and laying of 2 Runs of 6 Sq.mm, FRLS PVC insulated flexible ISI mark flexibles copper wire of in existing capping & casing for run of mains including all labour charges etc complete for power points, lighting circuits switch board and UPS point wiring. Makes: Finolex /Polycab / RR kabel / Havells / APAR EBXL / KEI / L&T / V-Guard.

Supply and fixing of ISI 25mm dia 2.0 thickness FRLS with IS:9537 part 3 rigid PVC surface conduit pipe in workstations/wall withs all required accessories such as long bends, junction boxes, T-bends, base saddles (one base saddle at every 500mm) to draw the circuit wiring/point wiring. The scope includes small civil works such as entry of 25mm pvc pipe concealed through walls and finishing the wall to the original condition after laying the pipe includes painting. All other accessories materials should be included in the item rate such as base saddles, junction boxes, L-bows, T-bends, GI screws etc . Makes : Sudhakar / Finolex / VIP.

Supply and Fixing of 50mm dia 2mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains.

Supply and laying of 3 Runs of 2.5 Sq.mm, FRLS PVC insulated flexible ISI mark flexibles copper wire of in existing capping & casing for run of mains including all labour charges etc complete for power points, lighting circuits switch board and UPS point wiring. Makes: Finolex /Polycab / RR kabel / Havells / APAR EBXL / KEI / L&T / V-Guard.

Supply and laying of 3 Runs of 4.0 Sq.mm, FRLSH PVC insulated flexible ISI mark flexibles copper wire of in existing capping & casing for run of mains including all labour charges etc complete for power points,lighting circuits switch board and UPS point wiring. Makes:Finolex/Polycab / RR kabel / Havells / APAR EBXL / KEI / L&T / V-Guard.

Supply and laying of 5 Runs of 4 Sq.mm, FRLS PVC insulated flexible ISI mark flexibles copper wire of in existing pipe for run of mains including all labour charges etc complete for 3 Phase Power in Cassette AC 16A & Geyser Sockets. Makes:Finolex/Polycab / RR kabel / Havells / APAR EBXL / KEI / L&T / V-Guard.

Supply, Wiring, Testing and Commissioning of Point Wiring for Light and Call Buzzer/Bell Point with 2 runs of 1.5 Sqmm FRLS PVC insulated 1100V grade multistrand copper conductor wires up to first point and 1.5 sq.mm for sub sequent points in cases of light points run in and including 25 mm width, 12.5mm thick FRLS PVC casing-capping on wall / ceiling including all accessories such as square junction boxes and ceiling rose, with metal boxes, modular switch/socket and the box etc covered with wrap around plus front plate along with all necessary fixing accessories like mounting screws etc.The Wiring conforming shall confirm to IS 732:1982.

Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter-3 Nos and 6A / 10A 1 Way 1 Module Modular Switch controls- 2Nos duly recessed in wall with 8 Module Hot Dip Galvanized Modular Metal Box size covered with 8 Modular Cover Frame including earth connections and all labour charges etc., complete.[ For computer switch board]. Modular Switch, Socket, Metal box & Cover frame Make: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina

Supply and Fixing of 20A 2 Module Modular Socket with shutter and 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ] Modular Switch,socket,metal box & Cover frame Make:Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina

Supply of 48" (1200mm) Sweep decorative Ceiling Fan with all accessories etc., complete. Makes : Crompton High Speed Decora / Havells Spark Deco / Orient Summer Crown / Panasonic Sprint Deco / Halonix Erbon

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Supply of 8" (200mm) Ventilating exhaust fan with shutters etc complete Makes : Crompton / Havells Ventilair / Orient / Panasonic / Halonix / RR.ELEC-5.1.10b

ELEC-3.5.4c Supply, transportation and fixing of 18 W +/-10% (>= 1800 Lumens) back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec / FIEM / Arraystorm / GM / Goldmedal

Supply and transportation of 5 W / 6 W +/-10% (>= 600 Lumens) LED Spot Light Recessed mounting with housing made of Powder coated Pressure die cast aluminium, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection:> 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec/ FIEM / Arraystorm / GM / Goldmedal. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs

Supply and fixing of 6A switch and 6A, 3/2 pin socket with shutter Modular type with 6A switch control and MS boxes with cover plate and GI switch box fixing on separate board including all labour charges etc., complete.Makes : Legrand Myrius / Schnider Opale / Gold Medal Curve / Anchor Roma viola / Panasonic Vision.

Supply & run of Cat 6 Cable LAN Cable cat-Makes: D link/AMP/ legrand/krone

Supply of (8+12) 4 way TPN DB horizontal with IP 43, Protection as per IS 13032 with 13 Nos 6-32A, S.P. MCB out goings and 1 No 40A-4 pole isolator Incommer and 1 No 40A-3 pole Isolator etc complete incduing all labor charges etc complete Make:Havells

Supply of 4 way SPN DB horizontal with IP 20, Protection as per IS 13032 with 1 Nos 6-32A TP MCB for Air Conditioner, complete incduing all labor charges etc complete Make:Havells

TBSC-J.IV-02 S&F premium make CPVC Pipes of 22.20mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental , labour charges, etc. complete for finished item of work as directed by Engineer-incharge

TBSP-H.I-25 Supply and delivery of 110 mm dia 3 M Single Socket PVC/ SWR pipe -6 Kg/sq.cm including cost of pipe, overhead charges and contractor profit etc., complete but excluding GST

Supply and delivery of 75 mm dia 3 M Single Socket PVC/SWR pipe -4 Kg/ sq.cm including cost of pipe, overhead charges and contractor profit etc., complete but excluding GST

Supplying & Fixing 15 mm nominal size PVC Connection with brass union nut C.P coated TBSP-J.I-32 .

TBSP-H.II-36 110 mm dia - Single 'Y' - UPVC/SWR Pipe fittings

TBSP-H.II-18 110 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings

TBSP-H.II-12 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings

TBSP-H.II-67 Floor Trap (Bell Mouth ) 110 mm - UPVC/SWR Pipe fittings

110 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings TBSP-H.II-27

75 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings TBSP-H.II-16

110 x 75 mm dia - Reducer - UPVC/SWR Pipe fittings

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice TBSP-H.IV01

Supply, Installation and commissioning approved make wash down wall mounted EWC conforming to IS:2556 (Part 16)-2002 with 'P' or 'S' trap with concealed flush cistern fixed in wall with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap all of approved make etc. complete for finished item of work in all respects: Special Coloured Grade-III SSR No TBSP-E.III-03

S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tubeand wall hook with 10 years warranty including cost and conveyance of all materials, labour charges, overheads & contractor profit etc., all taxes, except GST complete for finished item of work in all floors. TBSP-F.I-07

TBSP-E.VI-01 Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 660 x 460 mm - Single C.P. Pillar cock

S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal / external threaded connection conforming to IS 8931 TBSP-F.I-08

S&F of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931(For Wash basins , WCs & Urinal) TBSP-F.IV-07

Supplying & Fixing of CP finish brass bottle trap 250mm long with wall connection pipe & wall Flange TBSP-F.VII-03

S&F Stainless steel liquid soap container wall mounted and bottle type

S&F of Chromium plated finish stainless steel body Towel Ring with 10 years warranty

S&F of Chromium plated finish stainless steel body Toilet paper holder with 10 years warranty TBSP-F.VII-25

Supply and fixing of Mirror, black, 65x65 cm (25 5/8x25 5/8 ") , Basematerial: Fibreboard, Plastic foil Mirror: Glass Support rail, back: Galvanized steel, Steel, Galvanized including all hardware as per directions given by engineer in charge.

Supplying and fixing of stainless steel sink of size 508.00mm x 457.2mm x 203.20mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 32mm dia nominal size C.P. waste coupling, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including chiselling brick masonry wall and making good & restoring to original surfaces, including cost and conveyance of all materials to site, labour charges etc overheads & contractors profit etc., complete for finished item of work in all floors

Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make (HSW/Parry/Neycer) as approved by Engineer-in-charge, including supply and fixing 15 mm nominal size PVC connection with brass union nut C.P coated, 15 mm brass body CP finish self closing tap push type conforming to IS 1711, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges overheads & contractors profit etc., all taxes,.complete for finished item of work for all floors.

S&F of 15 mm CP finish brass body wall mixer with hand shower with center distance 150 mm conforming to IS 8931 TBSP-F.V-01

Supply and Transportation of Slim line / Tower Model/Verticool type split AC unit with 100% copper indoor unit and floor mounted outdoor condencing unit Hermetically sealed Scroll compressor suitable for operation on AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units etc complete with cordless remote control with 2 years warranty and annual maintenance contract. ELEC-6.2.1(B) 3.0 / 3.3 TR Three Phase capable of delivering 39600 BTU/hr and above with operating on refrigerant R-32 / R 410 Daikin / Bluestar / Hitachi / LG / Samsung / Lloyd or equivalent

Supply and Transportation of of INVERTER Model Cool type split AC unit with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord (Voltage range 160- 264 volts) and cordless remote control with with warranty of compressor for 5 years and comprehensive maintenance for 1.5 TR 5 Star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32 / R-410 Makes : Daikin / Toshibha / Carrier / Blue Star / Hitachi / LG / Samsung / Lloyd or equivalent ELEC-6.1.1

Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for split/Casseete AirConditioner including foaming etc., complete. 1 1/8" x 5/8" ELEC-6.7.2C

Installation of Split Air Conditioners. ELEC-6.7.28

Supply, Fabrication of 1set MS bracket suitable for fixing out door unit of ductable AC unit. ELEC-6.7.32

S&F premium make CPVC Pipes of 22.20mm OD Pipe - SDR 13.5

Supply of 2.5 Sqmm 4 Core PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Pawancab / Nakoda / HPL / Sudhakar / Bonton / Ollvin ELEC-1.5.7n

Supply and Delivery of Modern L Shape Office desk including all charges etc complete for finished item of work (featherlite/godrej)

Supply and Delivery of Conference Hall Desk including all charges etx complete for finished item of work

CABIN/TABLE SIZE-System Edgo Series Model No EIE 15075 Specifications Table top: 25mm thick Pre-laminated particle board with 2mm PVC edge lipping on all exposed edges. Under Structure. MS Powder Coated Square Legs (50X50) and Supporting on MS Powder Coated Cross beams (40X20). Modesty Panel: 18mm thick PLT Modesty Panel of 450mm Ht. Wire Management: Anodised Finish 300 x 150 Flip up box with soft closures, without sockets and switches are provided, PVC Cable Dump & vertical cover is considered for wire entry from the floor to the table. (1500 x 750 x 750)

Executive chairs Featherlite Liberate High Back Mesh Chair with Dynaflex Back Support to Provide Dual Frame Flexibility & Multilock Mechanism - Chair Net Weight: 16.7±0.5 kg SeatDepth: 430±10mm Seat Width: 500±10mm Chair Width: 660±10mm Chair Depth: 660±10mm Minimum Chair Height: 1255±10mm Maximum Chair Height: 1355±10mm Minimum Seat Height: 480±10mm Maximum Seat Height: 580±10mm Arm Rest Height: 160-250mm Arm Depth: 250±10mm Width (Arm to Arm): 455±10mm Backrest Height from Seat: 690±10mm Headrest Height: 155-195mm

Supply and delivery of Executive High Back Revolving And Tilting Chair with Mesh Head Rest and Korean Mesh Back including High Density Cushioned Seat, Adjustable Arms, Multiple Locking, Diecast Base, Nylon Twin Wheel Castors, Nylon Back Frame and Class 4 Gas Lift for seat adjustment etc. complete for finished item of work and as per the directions of Engineer-In-Charge (Innodesk /Pinnacle /Godrej/ Featherlite EHS-HAM-BLACK MESH/ Equivalent)

Executive chairs Featherlite Versa Medium Back Mesh Chair with Single Lock Synchro Mechanism & Fabric Upholstered Seat - Chair Net Weight: 13±0.5 kg Seat Depth: 465±10mm Seat Width: 505±10mm Chair Width: 660±10mm Chair Depth: 660±10mm Minimum Chair Height: 1000±10mm Maximum Chair Height: 1100±10mm Minimum Seat Height: 465±10mm Maximum Seat Height: 565±10mm Arm Rest Height: 185-275mm Arm Depth: 255±10mm Width (Arm to Arm): 450±10mm Backrest Height from Seat: 500±10mm

Supply and fixing of Book shelf Unit made of 18mm wood and 1mm thick laminate including warm lights for decorative purpose

Supply of three seater (steel for visitors)

Supply of Clifford Solid wood coffee table in honey Oak finish by Amberville

Supply of Clifford Solid wood 3+1+1 seater sofa in honey Oak finish by Amberville

Supply & Delivery of Bed with corner head board of size 0.94m x 2.06m x 0.40m with 6" thick matress including cost & conveyance charges and labor charges for assembling etc complete

Supply & delivery of pedestal size: 400L x 450D x 600Ht, Specifications: Top & Side 18mm thick pre laminated particle board, Back: 9mm thick pre laminated particle board, Edge: All exposed area with 2mm thick pvc edge lippih, handle: Finger groove handle and Lock: regular lock. (Featherlite/Godrej)