ICAT/T/NVH/PFAP/2024-25/203

Amount

Providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections or appropriate z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required Dia and size including necessary filling up the gaps at junctions that is at top or bottom and sides with required EPDM rubber neoprene gasket Aluminium sections shall be smooth or rust free or straight mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing or paneling CP brass or stainless steel screws all complete as per architectural drawings and the directions of Engineer in charge Glazing paneling and dash fasteners to be paid for separately Powder coated aluminium minimum thickness of powder coating 50 micron.

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately. Powder coated aluminium (minimum thickness of powder coating 50 micron).

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Make: Dorset or equivalent as per approved by engineer-in-charge.

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminium round shape handle of outer Dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required color and shade, with necessary screws etc. complete. Twin rubber stopper.

Extra charges for toughening of glass as desired by ICAT representative.

Providing & fixing of frosted film as per approved design. Make: Garware or equivalent as per approved by engineer-in-charge.