18 /EE/PMD/PHED OF 2024-2025/SL3

Amount

Supply and delivery of Submersible pumping machinery directly coupled with water proof suitable size motor having following specification: Pump- DISCHARGE-27 m3/hr HEAD:- 34 mtr. SHAFT: S.S/MS IMPELLER:- G.M./Bronze/S.S/Chrom Steel./Noryl OUTLET SIZE: 25mm/32mm/50mm PUMP EFFICIENCY IN PERCENTAGE:- Minimum 60% MOTOR- Submersible type, 3 ph.,50 Hz.,415V,.± 10%/ Volts, RPM-2900 with wet type winding ( Not less than 5 H.P), Make : PHED Approved Make) N.B:- (A) H/Q charateristic curve chart of pump set should be submitted before delivery. (B) Test certificate of pump & motor should be submitted during delivery.

Supply & delivery of 80mm dia. (DN) U.P.V.C. column pipe, 4mm thickness with both end threaded including one socket and threaded protector with allowable hydrostatic pressure 21kg/cm2 (1.5mtr long each) , Make: Any approved make from wbphed unified vendor list

Supply and delivery of 1.1 KV grade XLPE insulated 10 sq,mm x 3 core Alumium Armoured cable as per IS: 7098 ( Part -1 )2011. Make: PHE Approved .

Supply delivery at site 6 mm² x 3 core 1.1 KV Grade flat submersible copper conductor cable (to extend the motor connection upto Armoured cable) Make :-PHE Approved make.

Supply and delivery of floor mounted outdoor type Kiosk Box having Size : 1500 mm( W ) X 1000 mm ( H ) X 300 mm ( T ) - approx. + 4 nos Legs (250 mm length ) and 15 Nos x 3 Way terminals made of Aluminium bus bar size 20 mm x 6 mm and following details specification : - 1. The Panels will be CNC machine fabricated; 2. Design: Outdoor type, Double Door. 3. Fabrication – i. Sheet thickness –1.6mm thick CRCA MS sheet for non-load bearing & 2mm for Load bearing members. ii. Gland plate – 2mm thick CRCA MS sheet. iii. Type of sheet metal used - CRCA 4. Gland plates will be provided detachable and undrilled at bottom. 5. Cable entry will be from bottom. 6. Degree of protection – IP55 7. Powder coated painting will be done after seven tank processes. Final shade will be RAL 7032. Make : As per PHE approved Vendor list .

b) Laying of cable by sand cutting and filling after laying and binding of cable with 12 SWG gi wire with collecting line and connection complete as per requirement.

Laying of three cables of 10 Sq.mm x 3 core in an underground trench in single tier formation (horizontal) the trench size : 915 mm x 760 mm average depth with brick protection on the top of each cable with 8 nos. bricks per Mtr. and 4 nos. bricks per mtr. as separator between the cables including filling the space between the bricks and cables and also the trench with shifted soil, levelling up and restoring surface duly rammed .

Making straight through joint between motor cable and supplied 6 mm2 submersible copper cable for extension of motor cable up to required lengh by supplying necessary seal kit to make joints leak proof all complete as per direction.

Installation of above cable Kiosk at River bank side on (2.2 mtr. Length X 1 mtr width X 1 mtr height size) by masonary structure and plaeter , neat finish of exposed surface ( Earth work - 3 3 cum, soil cutting - 4.86 cum , brick work - 1. 35 cum , plaster & neat - 7 sqm each ,P.C.C.- 0.165 cum ) with 50 mm dia electrode -2 nos earthing with supplying earthing materials for the kiosk as per IE rule and 50 X 6 mm GI strip 12 mtrs length earhing connection with kiosk as per direction of EIC. (Rate is including hire charges of generator, welding set, fuels, lubricants & gland complete the job as per relavant IS and as per direction of EIC.)

Lowering and Installation and testing of submersible pumping machinery along with 80 mm dia.UPVC column pipe(of item No.2) part by part in the newly sunk tube wells with an arrangement of derrick, lifting tackles, tools and plants etc. on hire basis and binding the vertical submersible cable with the column pipes properly and fixing M.S. Top Cover on the tube wells with supplying necessary Clamps, nuts, bolts, washers, termination of cables ends etc. all complete as per direction.

Add GST @ 18%

Add CESS @ 1%

SUNRISE ENGINEERING CORPORATION (BID ID -6314015)

M/s. SOMA ENTERPRISE (BID ID -6314022)