Repair/maint of CI DI water pipeline and allied works including cleaning of OHT/UG sump repair/maint of pump and electric motors at AF Stn mandore under AGE EM GE AF No 2 Jodhpur and repair/maint of old rusted CI GI water pipeline and allied work at

Amount

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth, or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations, shafts, wells, cesspits, manholes, pier holes, for foundations of poles, struts, stays etc. or laying underground cable and water supply pipe lines etc. in hard/dense soil/rocks, & getting out including taking out old brick or precast cable cover complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm in soft/loose soil/\ complete all as specified and directed by Engineer-in-charge.

Removal of excavated soil material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and directed by Engineer-in-charge.

Taking up or down 15mm bore galvanised steel water tubing including connections, fixed in walls, ceiling or laid under floor or laid in trenches etc complete all as specified and directed by Engineer-in-charge. Note :-Excavation and earthwork shall be measured and paid for separately.

All as per Srl item No 4 above but 20 mm dia bore.

All as per Srl item No 4 above but 25 mm dia bore.

All as per Srl item No 4 above but 40 mm dia bore.

All as per Srl item No 4 above but 50 mm dia bore.

All as per Srl item No 4 above but 80 mm dia bore.

All as per Srl item No 4 above but 100 mm dia bore.

All as per Srl item No 4 above but 150 mm dia bore.

S&F 15mm bore galvanized steel water tubing medium grade with & including all fittings and fixed complete to walls and ceilings or laid in floors / trenches complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 12 above but 20 mm dia bore.

All as per Srl item No 12 above but 25 mm dia bore.

All as per Srl item No 12 above but 40 mm dia bore.

S&F 50mm bore galvanized steel water tubing medium grade with & including all fittings, laid in trenches complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 16 above but 80 mm dia bore.

Supplying, fixing and testing in replacement of 80mm bore cast iron sluice valve with langed ends drilled ISI marked conforming Class PN 1.6 to IS 14846-2000 with stainless steel spindle with iron wheel, CI gate with brass nut, bolts, washers and rubber packing for connecting pieces etc complete all as specified and as directed by Engineer-in-Charge.

All as per Srl item No 18 above but 100 mm dia bore.

All as per Srl item No 18 above but 150 mm dia bore.

Supply & fixing as in repair cast iron body Foot valve of size 80mm bore ISI marked with IS 4038 with flanged ends and drilled, with neoprene rubber gasket joint and nuts bolts (high tensile) washers etc complete including testing all as specified.

All as per item No. 21 above but size of 100mm

Supplying, laying, jointing, commissioning and testing 100mm bore centrifugally cast (Spun) ductile iron pressure pipe with spigot and socketed ends class K-7, confirming to IS : 8329/2000 blast furnace slag cement with portland cement properties suitable for rubber gasket jointing / tyton joints with inside cement mortar lining and black bitumen external coating, duly (ISI marked) laid in trenches complete all as specified and directed by Engineer-in-Charge. Note :- (i) DI fittings shall be measured and paid separately under respective items (ii) Pipes shall be laid in trenches already excavated for taking out old GI pipe line. Extra excavation / earthwork shall not be paid.

All as per Srl item No 23 above but 150 mm dia bore.

S&F in replacement gun metal globe or gate valve 20mm bore with iron wheel head, screwed both ends for iron pipes complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 25 above but 25 mm dia bore.

All as per Srl item No 25 above but 40 mm dia bore.

All as per Srl item No 25 above but 50 mm dia bore.

S&F Cast iron non return valve / reflux valve with rubber seat flanged type with by pass arrangement suitable for 80mm bore pipe, ISI marked, conforming to IS- 5312/2004 with stainless steel spindle, CI gate with brass nuts, bolts, washers and jointing with necessary ruber gasket etc including dismantling & taking out old unserviceable sluice valve of 80 mm bore, complete, all as specified & directed.

All as per Srl item No 29 above but 100 mm dia bore.

Supplying & fixing DI fittings confirming to IS-9523-2000 suitable for spigot & socketed pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc),tee pieces, single branch, 'Y' junction, double branch, cross collar, caps and plugs etc. suitable for spigot and socketed pipes upto 150 mm bore, complete, all as specified and directed by Engineer-in-charge.

M&L for 'D' Joint suitable for DI /CI/GI pipe sizes 50 mm dia bore including excavation work and other fittings as required including testing at site complete all as specified and directed by the Engineer-in-Charge.

All as per Srl item No 32 above but 80 mm dia bore.

All as per Srl item No 32 above but 100 mm dia bore.

All as per Srl item No 32 above but 150 mm dia bore.

S & F in repair 15mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed all as specified and directed.

All as per Srl item No 36 above but 20 mm dia bore.

All as per Srl item No 36 above but 25 mm dia bore.

Surface cleaning by removing the roots completely from the earth, shrubs, vegetation, grass, bushes, weeds by excavation not exceeding 15cm deep including sweeping removing the same to distance not exceeding 50m away from the installation and burning the same all as specified and directed by Engr-in-Charge.

M&L for taking out of Elect Motor 20/30 HP Capacity installed as motor from foundation after disconnecting electrical connections, dismantling motor and rewiding the same with super enamelled copper winding wire of existing gauge including varnishing, baking, cotton tape and greasing of bearings, bushes and other connected parts, reassembling and fixing the same in its original position including replacement of unserviceable nut-bolts, washer, lugs, terminal plate and making proper electrical connection complete all as specified and directed by Engineer-in-charge. Make of winding wire : - Devidayal / Chetak Note : - (i) Bearing if required for replacement shall be paid seprately (ii) Transportation of motor is included in the unit rate of items nothing extra shall be paid on this account

All as per serial item No. 40 above but motor of capacity 10/12.5 HP

All as per serial item No. 40 above but motor of capacity 7.5 HP

Taking out centrifugal motor of any capacity from foundation, dismantling the motor, taking out rotor and filling the material by welding work, finishing by lathe machine, replacement of unserviceable bearing, reassembling the motor and fixed in its original position complete all as specified and directed by Engineer-in-charge. Note: - (i) Bearing shall be measured and paid for separately as “Supply only” (ii) New Nuts, bolts and washers if required for refixing the motor shall be provided by the contractor, nothing extra shall be paid on this account.

Supply only Ball Bearing of suitable size for rotor of motor 20/30 HP installed complete all as specified and directed by Engineer-in-charge.

All as per serial item No 44 above but for motor of 10 /12.5 HP.

All as per serial item No 44 above but for motor of 7.5 HP.

Taking out defective centrifugal pump set , assembled with 20/30 HP elelctric motor, dismantling the pump set for carrying out repair / replacement of unserviceable parts such as CI impeller, Bush, ball bearing etc. reassembling, installing, commissioning and testing complete all as specified and directed by Engineer-in-charge. Note :(i) CI impeller, Bush & ball bearing required to replace shall be measured and paid for separately under respective items of BOQ as “Supply only”. (ii) The cost of transportation is included in the unit rate of this item nothing extra shall be paid on this account.

All as per serial item No 47 above but pump set assembled with 10 /12.5 HP elelctric motor

All as per serial item No 47 above but pump set assembled with 7.5 HP elelctric motor

Supply only ball bearing suitable for centrifugal Pump set assembled with 20/30 HP motor complete all as specified and directed by Engineer-in-charge.

All as per serial item No 50 above but assembled with 10 /12.5 HP Motor

All as per serial item No 50 above but assembled with 7 .5 HP Motor

Supply only stainless steel Bush suitable for pump set assembled with 20/30 HP motor complete all as specified and directed by Engineer-in-charge.

All as per serial item No 49 above but assembled with 10 / 12.5 HP Motor

All as per serial item No 49 above but assembled with 7.5 HP Motor

Supplying, laying & jointing in replacement submersible cable flat type, copper conductor of size 16 Sqmm 3 core complete all as specified & as directed by Engineer –in-charge.

All as per serial item No.56 above but 10 Sqmm 3 core.

All as per serial item No.56 above but 6 Sqmm 3 core.

All as per serial item No. 56 above but 4 Sqmm 3 core.

S&F in replacement rubber coupling as per existing model & make suitable for centrifugal pump set assembled with 20/30 HP motor complete all as specified & as directed by Engineer –in-charge.

All as per serial item No. 60 here-in-above but assembled with 10/7.5 HP motor

S&F in replacement cooling fan with locking aluminum cast type screw, as per existing type, suitable for 30/20/12.5 HP motor complete all as specified & as directed by Engineer –in-charge.

All as per serial item No. 62 above but suitable for 12.5/10 / 7.5 HP motor

S&F gland rope of size 10 sqmm or as required complete all as specified & as directed by Engineer –in-charge

S&F in replacement Digital type Voltmeter 96mm x 96mm, of range 0-500 volts, class -1, incl internal wiring with 1.0 sqmm single core PVC wire etc complete all as specified & as directed by Engineer-in-charge

S&F in replacement Digital type Ammeter 96mm x 96 mm, single phase, as suitable range, class -1, incl internal wiring with 1.0 sqmm single core PVC wire etc complete all as specified & as directed by Engineer-in-charge

S&F in replacement contactor ML-2, 3 phase 415 volts having auxiliary contracts 2 NO + 2 NC suitable for coil voltage 110 V, 220, 240 & 415 volts, 50 Hz of AC3 Rating 40 Amps and AC1 Rating 45 Amps complete all as specified and as directed by Engineer –in-charge.

S&F in replacement contactor ML-3, 3 phase 415 volts having auxiliary contracts 2 NO + 2 NC suitable for coil voltage 110 V, 220, 240 & 415 volts, 50 Hz of AC3 Rating 40 Amps and AC1 Rating 45 Amps complete all as specified and as directed by Engineer –in-charge.

S&F in replacement overload relay, suitable for 7.5 HP to 30 HP motor, 3 phase, 415 volt, 50 Hz as per sample complete all as specified and as directed by Engineer –in-charge.Make Havells

S&F in replacement single phase preventer type SDz5, SPPR + Timer, 415 V including necessary copper connection, lugs etc complete all as specified & as directed by Engineer-in-charge Make:- L&T Cat Part No XM818090000 or equivalent in ABB/SCHINEDER

S&F in replacement electronic timer type ET100, 110 / 240V, 50 HZ including necessary electric connection complete all as specified & as directed by Engineer-in-charge .

29.S&F in replacement MCCB 4 Pole 100 Amps, thermal magnetic release having, breaking capacity 25 KA, 415 Volt and connections complete all as specified and as directed by Engineer-in-Charge.

30.S&F in replacement MCCB 4 Pole 63 Amps, thermal magnetic release having, breaking capacity 25 KA, 415 Volt and connections complete all as specified and as directed by Engineer-in-Charge.

M & L for cleaning of RCC underground sump of capacity 50000 Gallons at AF Stn Mandore , dewatering the sump with water lifting pump , de-scaling internal surfaces of underground sumps with wire brush , removing the deposited mud from inside the sump , washing with bleaching powder & flush water two times and dewatering, applying two coats of lime wash inside the sump including writing capacity of tank , date of cleaning with synthetic enamel paint of white tint over black base (size of letter 5 mm thick and 15 cm in height) complete all as specified and as directed.

M & L for cleaning of RCC underground sump of capacity 50000 Gallons at Balsamand site AF Stn Mandore , dewatering the sump with water lifting pump , de-scaling internal surfaces of underground sumps with wire brush , removing the deposited mud from inside the sump , washing with bleaching powder & flush water two times and dewatering, applying two coats of lime wash inside the sump including writing capacity of tank , date of cleaning with synthetic enamel paint of white tint over black base (size of letter 5 mm thick and 15 cm in height) complete all as specified and as directed.

M & L for cleaning of RCC OHT capacity 50000 Gallons at AF Stn Mandore by descaling internal surfaces of OHT with wire brush , removing the deposited mud from inside tank , washing with bleaching powder & flush water two times and dewatering including writing capacity of tank , date of cleaning with synthetic enamel paint of tint white over black case (size of letter 10mm thick and 20 cm in height) complete all as specified and as directed

Cleaning of SWT pumping out complete/flushing out dirty water mud sludge dirt etc from inside the SWT by mud pump/bucket (Manually), cleaning in side walls, top & bottom surface of the SWT scraping, with wire brush, removing mud and sludge etc from tank to a distance upto 50 mtrs and depositing all as directed by Engr-in-Charge at site washing the SWT/pipes with bleaching powder solution and finally applying cement coat with 2% of potassium permanganate solution for disinfection all as directed by Engr-in-Charge including making with black paint of static water tank cleaned on dt of following capacity/depth :-

SWT of capacity 50000 Ltrs at Near OHT AF station Mandore.

SWT of capacity 50000 Ltrs at Near MT section bldg AF station Mandore.

SWT of capacity 50000 Ltrs at Near Arnoc Bldg bldg AF station Mandore.

Comprehensive maintenance servicing and testing of RO plant of 1000 Ltrs/hr capacity including washing, cleaning of sedimentation filter, disinfection process, servicing of pressure pumping set & dosing unit for supply qualitative water at permissible level of TDS as and when directed by Engr-in- charge.

Supply only sediment filter/pre filter Jambo 2011 as per existing make and model for 1000 ltrs RO Plant.

S&F RO Membrane for 1000 ltrs RO Plant complete all as specified and as directed.

M & L Carbon media for 1000 ltrs RO plant.

M & L Resin media for 1000 ltrs RO plant .

M & L Sand suitable for RO plant.

Comprehensive maintenance servicing and testing of water purifier AG 600 DF including washing, cleaning of filter, disinfection process complete all as specified and directed by Engr-in- charge.

M & L pre filter candle 204 as per existing make and model for water purifier complete all as specified and as directed.

Supply and fix pressure gauge air water meter of pressure range 0-10 kg/sqcm complete all as specified and as directed.

Supply and fix fully automatic water level indicator with indicate 12 different level of tank suitable for use at water supply installations on overhead reservoir and UG sump cosist of all connected items and wire complete all as specified and as directed.

M&L for Construction of brick masonry valve pit, in repair, of internal size 60cm x 60cm x 60cm including necessary excavation and earth work in soft/loose soil, brick work, plastering, white wash, PCC coping, MS frame made out of angle iron of size 40mmx40mmx6 mm, MS sheet cover of 3 mm thick fixed to angle iron frame by means of hinges welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock , complete all as specified and directed by Engineer - in - Charge Note :- (i) Brick wall shall be 23 cm thick built in cement mortar (1:4) (ii) Internal plaster shall be 15 mm thick in cement mortar (1:4) and external plaster upto 450mm from top shall be 20mm thick in CM (1:6) and remaining external surface shall be flush pointing in CM (1:6) as the work proceeds. (iii) PCC in foundation shall be 15 cm thick in cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate extended 15 cm all around from the external face of the walls. (iv) PCC coping shall be 15 cm thick in cement concrete ( 1:2:4) type B1 using 20 mm graded stone aggregate including grouting of angle iron frame in PCC. (v) Three coats of white wash to internal surfaces of valve pit. (vi) Depth of valve pit shall be reckoned from the top of PCC in foundation.

All as per Srl item No 88 above but internal size 90cm x 90cm x 90cm

All as per Srl item No 88 above but internal size 150cm x 150cm x 90cm

Cleaning of SWTs upto 15000 GLN capacity by continues dewatering till the complete cleaning of SWTs by using suitable capacity non clog diesel engine pump set and removing all the accumulated sediments, foreign particles etc including scrubbing, brushing and removing all the dirt/sludge accumulated on the walls/floor etc as required all as directed by Engr In Charge.

M&L for taking out defictive submersible pump set of capacity 10 / 12.5 HP Capacity from bore well after disconnecting electrical connections, transportation to workshop for repair, dismantling the pump set for detection of repair such as rewinding of motor, replacement of iron stainer, bronze impeller, gun metal bushes stainless steel sleeve, impeller key, thrust bearing, replacement of unserviceable nut-bolts, washer, lugs, terminal plate, reassembling, lowering in well in its original position, making proper electrical connections, commissioning & testing complete all as specified and directed by Engineer-in-charge. Note : - (i) Cost for transportaion to workshop and carry back to site after repair is inlcuded in the unit rate of item nothing extra shall be paid on this acount. (ii) Rewinding of submersible motor, Iron stainer, bronze impeller, gun metal bushes stainless steel sleeve, impeller key and thrust bearing if required for replacement shall be paid separetly against respective items of Schedule as "Supply only". (iii) Cost of new nuts, bolts, washers, lugs and terminal plate required to be replaced is included in the unit rate of this item nothing extra shall be paid on this account.

M&L for rewiding of submersible pump set of capacity 10 / 12.5 HP with PVC insulated copper winding wire of existing gauge including varnishing, baking, cotton tape and greasing of bearings, bushes and other connected parts complete all as specified and as directed by Engineer –in-charge

Supply only Iron stainer suitable for submersible pump of capacity 10/ 12.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Supply only Gun metal Bush suitable for submersible pump of capacity 10 /12.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Supply only Thrust bearing (Gun metal) suitable for submersible pump of capacity 10 / 12.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

M&L for Cleaning of RCC overhead reservoir upto 25000 gallon capacity at 60 feet staging by drain out the contaminated muddy water from bottom surfaces of the tank by using of pump and motor or by manually and cleaning the inside & bottom surfaces of walls with help of wire brushes and using specified dosage of potassium permanganate and cleaned water then drain out completely material to the entire satisfaction of Engineer-in-Charge with and including writing capacity of tank , date of cleaning of tank with synthetic enamel paint on outer surface of the tank complete all as specified and as directed by Engineer-in-Charge.

All as per Srl item No 97 above but RCC overhead reservoir of capacity exceeding 25000 gallon and not exceeding 0.5 Lakh gallon capacity at 60 feet

All as per Srl item No 97 above but RCC overhead reservoir of capacity exceeding 50000 gallon and not exceeding 1.5 Lakh gallon capacity at 60 feet

M&L for Cleaning of RCC underground sump upto 20000 gallon capacity at 20 feet depth by drain out the contaminated muddy water from bottom surfaces of the tank by using of pump and motor or by manually and cleaning the inside & bottom surfaces of walls with help of wire brushes and using specified dosage of potassium permanganate and cleaned water then drain out completely material to the entire satisfaction of Engineer-in-Charge with and including writing capacity of tank , date of cleaning of tank with synthetic enamel paint on outer surface of the tank complete all as specified and as directed by Engineer-in-Charge.

All as per Srl item No 100 above but RCC underground sump of capacity exceeding 0.5 lakh gallon and not exceeding 1 Lakh gallon capacity at 20 feet depth

All as per Srl item No 100 above but RCC underground sump of capacity exceeding 1 lakh gallon and not exceeding 2.5 Lakh gallon capacity at 20 feet depth

M&L for Cleaning of clarifloculator of Cap 100000 Glns by drain out the contaminated muddy water from bottom surfaces of the tank by using of pump and motor or by manually and cleaning the inside & bottom surfaces of walls with help of wire brushes and using specified dosage of potassium permanganate and Greasing all components by replacing the worn nut bolts of non clogging pump motor, and removing all the sludge dirt and deposits of any foreign materials etc. , painting of all the steel member channels, angles of the scrappers and mixers with two coats of bituminous based paint after preparation of old painted surface all as specified and directed by Engr-in-Charge.

M&L Cleaning of RCC raw water (back wash) sumps cap 25000 gln by drain out the contaminated muddy water from bottom surfaces of the tank by using of pump and motor or by manually and cleaning the inside & bottom surfaces of walls with help of wire brushes and using specified dosage of potassium permanganate and cleaned water then drain out completely material to the entire satisfaction of Engineer-in-Charge

M&L Cleaning of RCC raw water (back wash) sumps cap upto 10000 gln by drain out the contaminated muddy water from bottom surfaces of the tank by using of pump and motor or by manually and cleaning the inside & bottom surfaces of walls with help of wire brushes and using specified dosage of potassium permanganate and cleaned water then drain out completely material to the entire satisfaction of Engineer-in-Charge

M&L Cleaning of RCC sedimentation sumps cap 50000 gln by drain out the contaminated muddy water from bottom surfaces of the tank by using of pump and motor or by manually and cleaning the inside & bottom surfaces of walls with help of wire brushes and using specified dosage of potassium permanganate and cleaned water then drain out completely material to the entire satisfaction of Engineer-in-Charge

Supply only Water treatment Calcium hypo Chloride 65%-70% chlorine content (calcium based granular disinfectant for water treatment, packed in 45 kg drum complete.

Supply only Water treatmentbleaching Powder 25 Kg bag complete all as specified and as directed.

L C ASSOCIATES (BID ID -3299594)

Shri Electrical Enterprises (BID ID -3299665)