Deposit Kalippankulam Ward TVM Corporation Deposit Pipe laying at various places of Kalipankulam Ward Pipeline Work

Amount

PIPE LAYING WORKS

15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

OD164188/2022-2023:Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish , disposal of unserviceable material within 50 metre lead and laying old cement concrete interlocking paver blocks including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge.

15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes.

100.7.1:Bailing out water with 5HP engine and pump set including conveyance to the site, erecting, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc., complete.

OD168200/2022-2023:Lighting arrangements with generator and other necessary apparatus after conveyance to site including cost of fuel, lubricating oil and others for cost of staff etc complete.

OD168201/2022-2023:Taking connection from the existing main(Double boring), up to 200 mm PVC/AC/CI Pipe , boring the main, supplying and fitting suitable specials etc. and connecting the newly laid main, testing the joints etc. complete

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

100.98.1008:Engaging Coolie.

100.98.1009:Engaging Fitter ( grade 1).

OD165054/2022-2023:Alteration of house connection from the existing main upto 200mm PVC/AC/CI pipe, boring the main, supplying and fitting suitable specials etc and connecting the newly laid main, testing the joints etc complete as per the direction of engineer incharge.

CONSTRUCTION OF VALVE CHAMBER

15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.22.4:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHot rolled deformed bars

13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.

100.31.1.2:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 100mm diameter, Class I.

OD165115/2022-2023:Reinforced cement concrete 1:2:4 using 20mm metal including watering, curing, hire charges of form work, centering and shuttering for valve chamber and including the cost of cement 320 kg /m3 and excluding cost of reinforcement

OD165128/2022-2023:Conveying CI MH cover with frame from the deptl store to site and placing in position etc. complete

OD165130/2022-2023:Providing and fixing in position industrial type pressure gauges with gun metal/brass valves in pipe lines including all specials etc complete

SUPPLYING MATERIALS

100.98.223:Supply of PVC Pipe, 8kg/cm2, 90mm Dia.

100.98.457:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.

OD164187/2022-2023: Suppling CI MH Frame with cover

OD165978/2022-2023:Supply and laying 20 mm ASTM Pipe

100.98.458:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 100mm.

OD165813/2022-2023:SPECIALS @5%

OD165823/2022-2023:90mm PVC 90degree Bend

OD165824/2022-2023:90MM CIR

OD165833/2022-2023:Supply of PVC TEE-140 mm of KWA Standards

OD165848/2022-2023:Supply of PVC Reducer-140*110 mm of KWA Standards

OD165850/2022-2023:Supply of PVC Reducer-110*90 mm of KWA Standards

OD165852/2022-2023:Supply of CIR JOINTS 110mm

OD165862/2022-2023:Supply of PVC TEE-110 mm size,of KWA Standards

OD165868/2022-2023:Supply of PVC Valve Adapter with MS Flange(Tail Piece)-90 mm

OD165919/2022-2023:Supply of PVC Valve Adaptor with MS Flange(Tail Piece)-110 mm

AJEESH R

Bidder Name

GOPALAKRISHNAN NAIR

AJEESH R