Construction of Way Side Amenity Centre WAC at Nimapada in Puri District

CIVIL WORK (BUILDING)

Double under reamed pile foundation with RCC M25 using 12mm size black hard granite crusher broken chips including cost of borring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.

6.00 mtr long , 300mm dia

Earth work in ordinary soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge.

Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradient including cost of all materials, conveyance, taxes, royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge.

Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate 40 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties, sundries , T & P etc. but excluding the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.

Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T & P etc complete in all respect as per the direction of Engineer-In-Charge.

Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6) in foundation. Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .

R.C.C. work M-25 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying.

Pile Cap

Column

Plinth Beam

Roof Beam

Roof Slab

Slope Roof slab

Lintel for openings

Chajja

Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.

Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:4). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .

125mm wall

Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .

Supply and fixing of factory-made WPC (Wood Plastic Composite) door frame of approved make and colour, made from high-density WPC, termite-proof, water-proof and fire-retardant, of size as per door opening, including cutting, mitring, joining, fixing with MS holdfasts / fasteners, necessary screws, adhesive, sealant, making good the wall surface, complete in all respects as per drawings, specifications and direction of Engineer-in-Charge.

Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge

Providing 12mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge

Providing 6mm thick cement plaster in cement mortar of (1:4) to RCC surfaces such as ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening/chipping, scraping and cleaning and finishing the plastered surface smooth using wooden floats, bars, etc. only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawing including cost of all materials, conveyance, loading and unloading, taxes, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.

Providing & laying best quality Anti skid Ceramic floor tile of size 300x300 mm of approved make confirming to IS-15622 specifications in floor over 20mm thick cement mortar (1: 4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. Including finishing the joints with epoxy based water proofing grout to match the color and shade of tiles complete as per the design & drawing with cost of all materials, labour, conveyance, taxes,royalties, T&P etc. All complete as per the direction of Engineer -in-charge.

Providing and laying Glazed Ceramic Wall Tiles in dado/skirting confirming to IS : 13753 of approved make, quality, colour and size 300mm x 450mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.

Providing and laying 600 mm x 1200 mm Vitrified Floor Tiles confirming to IS :13756 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.

Providing and laying Kota Stone Flooring using Kota tiles of area above 0.10 sqm of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance,royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use..

Providing and laying Vetrified Industrial floor tiles of premium grade (300mm x 300mm.) having thickness 8mm to 10mm confirming to IS 445 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.

Providing & laying granite in floor using 16-18mm thick granite slab of approved quality, colour and size over 20mm thick cement mortar (1:4) and finishing the joints with epoxy based water proofing grout to match the colour & shade of tiles including cutting to shape, grinding and wax polishing, cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sundries, watering etc. complete as per drawing and direction of the Engineer -in-charge.

Providing & laying granite in dado using 16-18mm thick granite slab of approved quality, colour and size over 20mm thick cement mortar (1:4) and finishing the joints with epoxy based water proofing grout to match the colour & shade of tiles including cutting to shape, grinding and wax polishing, cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sundries, watering etc. complete as per drawing and direction of the Engineer -in-charge.

Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.

Supplying,fitting & fixing in position 30mm thick WPC door with 1mm laminate including fixing of fixtures like 100mm hinges, handle, tower bolt, stopper, door closer including cost of all materials,labour,transportation,loading & unloading etc complete as per specification and direction of Engineering-in-charge.

Supply and fixing uPVC sliding windows /Ventilators having a frame size of 88mm width x 52 mm ht and wall thickness of 2.2 mm the uPVC frame is reinforced throughout with galvanised steel having a thickness of 1.2 mm and a guide rail is provided on the bottom tracks of the frame for smooth sliding of the sash panels. The sash panel has a size of 57 mm width x 42 mm height and wall thickness of 2.2 mm. The sash panel is reinforced throughout with galvanised steel having a thickness of 1.2 mm.The sash panel also comprises of roller,touch lock in each sash panel,glass beading,rubber gasket,finseal for dust removal and an interlock for holding the tracks together.The sash panel is singly glazed with 5mm thick Clear glass .Complying with relevant standard specification the model and brand of the UPVC window has to be approved by the EIC before fixing.The rates shall be inclusive of all cost of materials,labour,T&P etc. complete.

Providing and fixing Steel work welded in built up section / framed (including M.S. angle, plate, sq.bar, flat, m.s.tubular section, Heavy type hinges) work incuding cutting, hoisting,fixing in position and applying apriming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating, frames, guard bar, ladder, railings for balconies and straircase, brackets, gates and similar works as per direction of Engineer-In-Charge. (All structural steel contractor's own supply).

Providing 12mm toughened glass door with top patch, floor spring, lock & SS handle of Hardwyn/Godrej complete as per specification and direction of the Engineer in charge

Providing 12mm toughened glass fixed partition with top patch, bottom patch complete as per specification and direction of the Engineer in charge

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, T & P etc. required for the complete in all respect as directed by the Engineer-in-charge.

Providing and painting two coats with synthetic enamel paint (Nerolac/ Asian/ Berger/ Dulox or equivalent make) of approved quality and approved shade confirming to ISI on iron/wood work to give an even shade including sand papering and making the surface smooth in all floors at all height with cost, conveyance, loading, unloading and taxes of all materials, cost of all labour, sundries, T& P scaffolding and taxes of all materials, cost of all labour, sundries, T & P scaffolding etc. required for the work and complete in all respect as directed by the Engineer-in-charge.

Providing and fixing of Asphalt based laminated roofing shingles of Technonicol Lousiana or equivalent complying with EN-544 SINGLE- LAYER, base per layer fiber glass 100 of Flow resistance at elevated temperature 150 degree C, Thickness per layer 2.7 +- 0.2, mm and weight per sqm12.5 Kg /M square), Over the App membrane shall be laid using nailing and sealing all joints etc . and preparing the Surface complete as per direction of Engineer-in-charge.

Providing and fixing of Asphalt based Double gauge high end factory made HIP & RIGDE of Technonicol Lousiana or equivalent complying with EN-544 SINGLELAYER, base per layer fiber glass 110 of Flow resistance at elevated temperature 100 degree , Thickness per 3.4 +- 0.2, mm and weight per sqm 5.5 Kg /M square), Over the App membrane shall be laid using nailing and sealing all joints etc . and preparing the Surface complete as per direction of Engineer-in-charge

Supply and fixing of MCM Modified Clay Material ‐ MCM A Series Brick‐ 240 x 60 mm of PHOMI make, as per company standard dimension, pattern, colour asspecified, manufactured through unfired patented (Ref: US patent 8505840 B2 &European Patent 2157139) manufacturing technology, bonded together by usinglow heat temperature and having CE approval with the thermal conductivity of0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material.MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installationdrawing provided, and colour of the grout should be as per the architect’s specification depending onthe substrate and as per the direction of Engineer in-charge.

Providing Two coat of Textured paint of approved make, quality and shade over the wall surface of the building over (Two or more coats ) of primer of approved make including cost of material, brushes, all labour, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)

Aluminum Fixed Curtain Glazing (Double Glazed) :- Providing and fixing Anodized System Aluminum curtain glazing of TOSTEM / NCL ALLURO / ALUMIL make, suitable for 1.6 KPA wind load. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. There shall be no visible joineries in any intermediate section. All other major Accessories should also be made by the same manufacturer. The outer frame Depth will be 100 +/- 5 mm with minimum transom / mullion size of 100 mm x 70 mm or 200 x 70 for height exceeding 3000 mm. All glasses will be 22 mm DGU Ref Toughened ST-146 and to be fixed from outside only. The system should allow glass thickness up to 10 mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 1600 Pa.

Supplying and fixing rolling shutters of approved make, made of required sizeG.I., interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.

Providing and fixing handmade traditional Pattachitra painting executed by skilled artisans, made on walls/ seasoned cloth (cotton canvas) treated with natural tamarind gum and chalk paste, hand-painted using natural/eco-friendly mineral and vegetable colors, depicting traditional mythological / cultural motifs, complete with surface finishing, mounting/framing (if required), including all materials, labor, tools, transportation, taxes, and workmanship, as per approved design, drawing, color scheme, and direction of the Engineer-in-Charge.

Sculptures

Supply, fabrication and fixing of FRP murals, made from high-quality Fibre Reinforced Plastic, including moulding, casting, surface finishing, colouring/painting as approved by the Engineer-in-Charge, complete with necessary framework, anchors, fasteners, scaffolding, all labour, materials, tools, transportation, handling, installation at all heights, and all incidentals, complete in all respects as per approved drawings, design and specifications.

Providing, supplying, fabricating, transporting and fixing of handcrafted terracotta sculptures of approved design, size and theme, made from high-quality natural clay, kiln-fired for durability, including surface finishing, colouring/patination as approved, complete with all necessary supports, anchoring arrangements, base preparation, grouting, lifting, placing, protection during execution, tools, labour, materials and incidentals, complete in all respects as per drawings, specifications and direction of Engineer-in-Charge.

LAND FILLING

Supplying & filling with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H Specifications for Road & Bridge works(4th Revision)

Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.

INTERIOR WORKS

Providing, fitting, fixing up Gypsum False ceiling of approved design and drawing in all floors with G.I Section on 4 walls to be fixed by means of steel screw and PVC plug and the G.l. grid 2’-0”x2’-0” to be suspended from ceiling by using 12.5mm thick Fire Line Gypsum Board including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.

WOODEN PANELLING:- Providing and fixing wooden panelling suitably fixed to the walls with 19 mm thick bwp ply with necessary Hardwood, skirting , mouldings & teak wood beading on the edge etc. as per the detail design including the cost of all materials, labour, overheads and T & P etc. complete.

Supply and fixing uPVC sliding windows /Ventilators having a frame size of 88mm width x 52 mm ht and wall thickness of 2.2 mm the uPVC frame is reinforced throughout with galvanised steel having a thickness of 1.2 mm and a guide rail is provided on the bottom tracks of the frame for smooth sliding of the sash panels. The sash panel has a size of 57 mm width x 42 mm height and wall thickness of 2.2 mm. The sash panel is reinforced throughout with galvanised steel having a thickness of 1.2 mm.The sash panel also comprises of roller,touch lock in each sash panel,glass beading,rubber gasket,finseal for dust removal and an interlock for holding the tracks together.The sash panel is singly glazed with 5mm thick Clear glass .Complying with relevant standard specification the model and brand of the UPVC window has to be approved by the EIC before fixing.The rates shall be inclusive of all cost of materials,labour,T&P etc. complete.

Providing, supplying and fixing of Armstrong False Ceiling comprising of 15/16" exposed T-grid suspension system including main tees, cross tees, wall angles, suspension hangers, GI wires/rods, all complete as per manufacturer’s specifications, properly aligned and levelled, including supply and installation of Armstrong mineral fibre ceiling tiles of size 600 × 600 mm (or 1200 × 600 mm), with necessary cut-outs for light fixtures, air-conditioning diffusers, sprinklers, access panels etc., including all labour, materials, tools, scaffolding, wastage, transportation, and making good complete in all respects as directed by Engineer-in-Charge.

FURNITURE

Dining Table with Chairs (6-seater)

Supplying, delivering, assembling, and placing 6-Seater Dining Table Set comprising one rectangular dining table and six dining chairs, made of solid hardwood/engineered wood frame. Dining table having engineered stone/marble-finish top with decorative inlay design, hardwood apron and turned solid wooden legs, factory finished with smooth sanded surface and anti-scratch polish in approved shade. Chairs made of solid hardwood frame with high backrest having horizontal wooden slats, upholstered cushioned seat with fabric/leatherette covering in approved colour. Including all necessary hardware, joinery, fittings, labour, loading, unloading, transportation, installation at site complete in all respects as per direction of Engineer-in-Charge. Approximate Size of Table: 1500–1800 mm × 900–1050 mm × 750 mm (L × W × H)

Supplying, delivering, assembling, and placing 4-Seater Dining Table Set comprising one rectangular dining table and six dining chairs, made of solid hardwood/engineered wood frame. Dining table having engineered stone/marble-finish top with decorative inlay design, hardwood apron and turned solid wooden legs, factory finished with smooth sanded surface and anti-scratch polish in approved shade. Chairs made of solid hardwood frame with high backrest having horizontal wooden slats, upholstered cushioned seat with fabric/leatherette covering in approved colour. Including all necessary hardware, joinery, fittings, labour, loading, unloading, transportation, installation at site complete in all respects as per direction of Engineer-in-Charge. Dining Chairs (4 Nos.): Dining chairs made of solid hardwood frame with ladder-back design, cushioned seat upholstered with fabric upholstery, seat height approx. 450 mm, finished to match the dining table, including padding, upholstery, fixing and finishing. Approximate Size of Table: 900–1050 mm × 900–1050 mm × 750 mm (L × W × H)

Providing, supplying and placing 3+1+1 sofa set (Geeken, Godrej, Durian or equivalent) comprising one three-seater and two single-seater sofas. Frame made of seasoned hardwood (Sal/Neem/Rubber wood), termite & borer treated. Seat cushions with high-density PU foam (40–45 kg/m³) and back cushions with soft PU foam (28–32 kg/m³) with fiber filling. Upholstered with premium leather / leatherette (PU-based), tan/brown shade, double-stitched seams. Broad padded armrests, contemporary design, ergonomic back support. Approx. size: 3-seater 2100–2250 × 850–900 × 800–900 mm; 1-seater 900–1000 × 850–900 × 800–900 mm. Solid base with anti-skid pads. Including transportation, placement, complete as per direction of Engineer-in-Charge.

Providing and fixing centre table (Geeken, Godrej, Durian or equivalent) of size 48" (L) × 24" (W) × 18" (H) made of 18 mm thick BWP grade plywood / MDF for top and structure, finished with 1 mm thick laminate / veneer with polish / PU finish as approved. All exposed edges finished with 2 mm PVC edge band / solid wood lipping. Base/frame made of solid wood / plywood, properly seasoned and treated for termite resistance. Including all necessary hardware, fittings, adhesive, screws, labour, complete in all respects as per drawing and direction of Engineer-in-Charge.

PH WORKS

Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted European water closet of Hindware make having cat no 20092 or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge.

Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware counter top wash hand basin of Hindware make having cat no 91094 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.

Supplying and fixing urinal of Hindware make having cat no 96014 or equivalent of approved make including all fittings like 450mm long connection pipe, waste coupling nut, waste pipe etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge.

Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized Bib cock short body of Jaquar Cat. No.-ALI-85037 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-ALI-85053 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized 15mm dia concealed Stop cock of Jaquar Cat. No.-FLR-5083NK with ALD-083 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized pillar cock of Jaquar Cat. No.ALI-85001 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing of 150x150mm CP overhead shower of Jaquar Cat. No.-OHS-1789 with arm SHA-479L600 or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-FLR-5041N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD-573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized urinal valve of Jaquar Cat. No.-PRS-073 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all material, labour T&P and fixtures for providing and fixing of stain less steel sink of Nirali Orra Elegance 555x401x215mm or equivalent type of approved make with its components like 40mm CP waste of cat no ALD 709, 40mm waste pipe etc, including all requisite fixing materials complete as per the PH specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and fixing standard sized sink cock of Jaquar Cat. No.-LYR-38347S or equivalent type of approved make of Hindware / Parryware make complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24" of Jaquar Cat. No.-AKP-3571PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized CP towel ring of Jaquar Cat. No.- AKP-35721P or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-AKP-35771P or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized CP robe hook of Jaquar Cat. No.-AKP-3579P or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-ACN-1131N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing toilet paper holder of Jaquar Cat. No.-AKP-35753PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge

Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge.

15 mm dia

20 mm dia

25 mm dia

32 mm dia

40mm dia

Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge.

75mm dia

110mm dia

160mm dia

Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge.

110mm dia Cowl

110mm dia Plain Bend

110mm dia SWR Door Bend

110mm dia Pipe clip

75mm dia Plain Bend

Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Full way Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and as per the direction of the Engineer-in-charge.

25mm Dia

32mm Dia

40mm Dia

Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.

Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.

Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking SWR/HCI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.

Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge.

Supplying all materials, labour, T&P and fittings and fixing of Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately)

Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 25mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge.

Construction of circular brick masonary manhole chamber of size 1.20 x 0.90 mtr including cement concrete (1:3:6) in bed by using 40mm size granite metal, brickwork in CM (1:4) in foundation & plinth, cement plastering (1:3) over flyash brick, plastering in CM (1:3) with neat cement punning, CC (1:2:4) over bed for benching and channeling, RCC M30 for roof slab of 150mm thick and supply fitting and fixing SFRC medium duty type cover including cost of centring and shuttering cost of MS rod for RCC work, supplying fitting and fixing of the polypropelen step iron of required interval etc all complete with all cost, conveyance, royalties taxes etc all complete as per direction of Engineer-in-charge.

Extra for every additional depth of 0.10mtr or part there of manhole size 1200x900mm from 1100mm to 1650mm depth (data for 0.10 mtr per each)

Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of Engineer-in-charge.

Labour for drilling a perfectly vertical bore hole for a specified dia for a specified depth below G.L through consolidated and un-consolidated rocks with down the hole hammer drilling rig or combination drilling rig (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of EIC including use of own rigs with its accessories, T&P & consumables etc. for lowering of 200mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/ PVC casing pipes, if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the Tube Well).

00 mtr to 30 mtrs

30 mtrs to 100mtrs

Providing & lowering the following size PVC pipes (ASTM) with or without slotted pipes as per the necessity from 1.00m above ground level up to required depth and fitting and fixing up in perfectly vertical position, including cutting, threading pipe and slotted pipe and supplying and fixing all jointing materials, T&P etc. complete and keeping the top of the casing pipe threaded including plugging the tube well to prevent entry of foreign materials from above. The cost inclusive of pipes, fittings, labour, consumables, POL, consumables with hire & running charges of machinaries etc. as per specification & direction of EIC.

Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004 upto required depth.

Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)

Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge

Supply, installation, testing and commisioning of vertical submerssible pump set of approved make having required discharge including installation of pump set with wire ropes, clamps etc inside the borewell, etc complete as per the Direction of Engineer-in-charge. (Duty of pump to be decided depending upon yeild of the borewell)

3 core 6.0sqmm copper flat cable

Bore Cap

Clamp

KITCHEN EQUIPMENT

WORKING TABLE WITH 2 U/S DIMENSION: 42X24X34+6 Specification : Top: 16 SWG 304 AISI SS Sheet. Legs : 16 SWG SS Pipes. Shelves : 18 SWG 304 Grade SS Sheet The unit is to be mounted on bullet type adjustable feet . Structure: Top underneath by M.S. Angles. The unit is to be mounted on bullet type adjustable shoes.

BULK SINGLE GAS BURNER DIMENSION: 36X36X20 Specification : Top in 16swg thick s.s. sheet, front in 18swg thick s.s. sheet with recessed design heavy duty removable grates of cast iron T 35Canteen Burner with individual pilot flames.

BULK DOUBLE GAS BURNER DIMENSION: 60X30X20 Specification: Top in 304 grade 16swg thick s.s. sheet Front in 304 grade 18swg thick s.s. sheet with recessed design Heavy duty removable grates of cast iron . Burners : 2 No’s, G-10 Indian Burner with drip trays and pilot Burner. The unit is to be mounted on bullet type adjustable shoes.

WORKING TABLE WITH 2 U/S DIMENSION:60X24X34+6 Specification: Top: 16 SWG 304 AISI SS Sheet. Legs 16 SWG SS PipesShelves : 18 SWG 304 Grade SS Sheet The unit is to be mounted on bullet type adjustable feet. Structure: Top underneath by M.S. Angles. The unit is to be mounted on bullet type adjustable shoes.

WORK TABLE WITH SINK DIMENSION: 60X24X34+6 Specification: Top in 16swg thick s.s. sheet top sound dampened by an approved methoduprights in 38x38x16swg 304 grade s.s. square tube 18 swg, s.s. sheet bolted to the uprights

THREE BURNER RANGE DIMENSION: 72X24X34+6 Specification: Top in 16swg thick s.s. sheet with drip less edges rear splash in 12mm s.s. 16”high bent 100mm on both sides C.I. Wok rests to be provided on top of m.s. drums front in 18swg thick s.s. sheet with recessed design Burners : 3 G-10 Indian Burner With drip trays and pilot lamp The unit is to be mounted on bullet type adjustable shoes.

SINGLE BURNER INDIAN DIMENSION: 24X24X34+6 Specification: Top in 16swg thick s.s. sheet front in 18swg thick s.s. sheet with recessed design heavy duty removable grates of cast iron T 35Canteen Burner with individual pilot flames.

CHINESE RANGE DIMENSION : 66X30X34+12 Specification: Top in 16swg thick s.s. sheet with drip less edgesrear splash in 12mm s.s. 16”high bent 100mm on both sides C.I. Wok rests to be provided on top of m.s. drums front in 18swg thick s.s. sheet with recessed design Burners: Chinese H.P. – 2 Nos. – T – 35 Stock L.P. – 1 No. T – 22 With drip trays and pilot lamp The unit is to be mounted on bullet type adjustable shoes.

ICE CREAM DEEP FREEZER DIMENSION: 48X24X34 Specification: Standard make to supplied by the service provider

TWO DOOR FREEZER DIMENSION: 30X30X84 Specification: Top in 18swg thick s.s. sheet bent 50mm and 12mm on all sides excepting on sides with splash back. Top sound dampened by an approved method. Exterior in 20swg 304grade s.s. sheet Interior in 22swg 304grade s.s. sheet 2 doors self closing type Dark colored magnetic gaskets high density puff insulation Hermetically sealed Kirloskar compressor. Thermostat controlled fan cooled condenser.Easy to remove louvers for cleaning of

POT RACK DIMENSION : 48X24X60 Specification : Legs : 16 SWG SS 1!/4” Square Pipes Shelves : 20 SWG 304 Grade SS Sheet. The unit is to be mounted on bullet type adjustable feet.

PLATE RACK DIMENSION : 30X18X72 Specificaion : Legs : 16 SWG SS 1!/4” Square Pipes Shelves : 20 SWG 304 Grade SS Sheet. The unit is to be mounted on bullet type adjustable feet.

DIRTY DISH LANDING TABLE DIMENSION : 60X24X34 Specification : Top in 16swg thick s.s. sheet top sound dampened by an approved method uprights in 38x38x16swg 304 grade s.s. square tube 18 swg, s.s. sheet bolted to the uprights Sink in 16swg thick s.s. sheet with 12mm collar on all sides

THREE SINK UNIT DIMENSION : 72X24X34 Specification : Top, Flash Back & Drain Board 16 SWG 304 AISI SS Sheet. Under Frame: Heavy duty M.S. angle with rust proof & double coat paint. SINK: Heavy duty SS 304 quality with 40 mm dia. LEGS: Heavy duty SS pipe with nylon shoes.

CLEAN DISH TABLE DIMENSION: 42X24X34 Specification : Top In 16swg thick s.s. sheet Top sound dampened by an approved method Uprights in 38x38x16 swg 304 grand s.s. square tube 18 swg s.s. sheet bolted to the uprights

SS. WALL HOOD DIMENSION : 90X36X18 Specification : Construction in 20swg 202 grade s.s. sheet Channels for fixing of filters grease drain box s.s. baffle or cyclonic filters high density puff insulation bulk head lights cutouts on top for duct openings as per HVAC consultant

SS. WALL HOOD DIMENSION : 54X30X18 Specification : Construction in 20swg 202 grade s.s. sheet Channels for fixing of filters grease drain box s.s. baffle or cyclonic filters high density puff insulation bulk head lights cutouts on top for duct openings as per HVAC consultant

SS. WALL HOOD DIMENSION : 30X30X18 Specification : Construction in 20swg 202 grade s.s. sheet Channels for fixing of filters grease drain box s.s. baffle or cyclonic filters high density puff insulation bulk head lights cutouts on top for duct openings as per HVAC consultant.

SS. WALL HOOD DIMENSION :48X30X18 Specification : Construction in 20swg 202 grade s.s. sheet Channels for fixing of filters grease drain box s.s. baffle or cyclonic filters high density puff insulation bulk head lights cutouts on top for duct openings as per HVAC consultant.

KITCHEN EXHAUST GI FRESH AIR SYSTEM Specification : GI ducting.

BULK KITCHEN EXHAUST FRESH AIR SYSTEM Specification : GI ducting.

EXHAUST FAN (5 H.P)

FRESH AIR EXHAUST FAN(2 H.P)

GAS BANK (20 Manifold )

STORE RACK DIMENSION : 36X18X72 Specification : Four nos. adjustable shelves shelves in 1swg think s.s. sheet 38x38x2.5 mm think s.s. upright s.s. hardware shelves to have 20mm dia holes.

STORAGE BINS (50KG) Specification : S.S 304 grade for Flour, Dal, Sugar etc.

STORE BED DIMENSION : 48X24X20 Specification : M. S bed with wood top for oily & gritch Product.

L.P.G Delivery Pipe line 1”dia. (MS seamless schedule 40 or TATA ‘C’ class ERW Pipe) AS PER ACTUAL

DRAINAGE SYSTEM

Earthwork in excavation of foundation trenches in ordinary soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.

Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge. `

Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).

Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland slag cement (PSC) with 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-In-Charge.

Providing and fixing Steel work welded in built up section / framed (including M.S. angle, plate, sq.bar, flat, m.s.tubular section, Heavy type hinges) work incuding cutting, hoisting,fixing in position and applying apriming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating, frames, guard bar, ladder, railings for balconies and straircase, brackets, gates and similar works as per direction of Engineer-In-Charge. (All structural steel contractor's own supply).

Ms Grating for 300 x300 drain

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Covers on drains of footpath of various sizes, of M-25 grade cement concrete, including cost of centering, shuttering, reinforcement of specified dia TMT bars of Fe 500 grade, neat cement punning on finished surface, properly encased on all edges and providing 2 Nos. 12 mm dia bar for hooks, including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.

LANDSCAPING

Surface dressing of the ground including removing Vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish lead upto 50m (at least 5m away from the dressed area). (Provisional)

Supplying and stacking & speareding of good earth at site including royalty and carrage up to 5 KM (earth measured in stacks will be reduced by 20% for payment) 300mm th. (Provisional)

Supplying and stacking sludge at site including royalty and carrage up to 5 KM (sludge measured in stacks will be reduced by 8% for payment). (Provisional)

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation, breaking clods and fine dressing the ground including all materials and labour complete as per direction of Engineer-In-Charge. (Provisional)

Provision of soft surfaces such as grass lawns in between the open spaces.

Planting of Ornamental spp (30"x30", 6'x7' Height Poly pack.) Digging pits removing all unserviceable materials and dumping outside the working area as shown by the engineer incharge .Supply and filling the same pits with good soil and well decomposed cow-dung manure mixture of ratio 4:1 and required quantites of fertilizer and pesticides and supply and planting with specified saplings as per the instruction of engineer in charge and taking up maintenance work like watring ,weeding apply of fertilizer, pesticides etc including cost of men, matrial , tools,tackles all complete.

Slow growing ornamental species. (Provision)

(i.e. Asoka (sarca asoka), Baula (mimussops elengii), Bottle brush (callistemin lanceolatum), Neem (azadirchta indica), Karanj (pangamea pinnata), Debdaru (polyalthia longifolia), Aonla (embelica officinalis), Sunari (cassia fistula) & Kanchan (bauhinia variegate)

Shrub species (i-Local species).(Provision)

(i.e. Mandar (hibiscus rosasinesis), Tagar (tabarnae montana coronaria) , Kaniar (thevetia spp), Karabira (nerium oleander)

Creepers/ Climbers/ Ground covers.(Provision)

(i.e. Jui(jasminum offcinale), Jai (jasminum pubescence), Madhumalati (quuisquilis indica)

Supplying fitting fixing of UPVC (SCH-80) pipe including all cost. (Provision)

i) 25 mm dia

ii) 40 mm dia

Fitting Fixing of PVC Ball Valve. (Provision)

i) 25 mm dia

i) 40 mm dia

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. (Provision)

15mm dia CP Bib cock (Plaza/zigma/Amber/Delux Make) (Provision)

RETAINING WALL

Single under reamed pile foundation with RCC M20 using 12mm size black hard granite crusher broken chips including cost of borring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.

6.00 mtr long 300mm dia

Earth work in ordinary soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge.

Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradient including cost of all materials, conveyance, taxes, royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge.

Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate 40 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but excluding the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade including centering & shuttering as per approved designs and drawings having a minimum compressive strength (in work test) 25 N / mm2. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceed 25 % ) to be mixed in concrete mixture including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of Tor steel and binding wires and labour charges for straightening, cutting, bending binding etc. of tor steel tying the grills and placing in proper position.

b)Pile cap

c) Retaing Wall

Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.

COMPOUND WALL

First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. at all floors and all heights.

Providing 12mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge

Providing and fixing Steel work welded in built up section / framed (including M.S. angle, plate, sq.bar, flat, m.s.tubular section, Heavy type hinges) work incuding cutting, hoisting,fixing in position and applying apriming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating, frames, guard bar, ladder, railings for balconies and straircase, brackets, gates and similar works as per direction of Engineer-In-Charge. (All structural steel contractor's own supply).

Providing & Applying priming one coat with water based Cement primer of approved brand and manufacture on plastered surface including cost, conveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.

TEXTURED PAINT :- Providing Two coat of Textured paint of approved make, quality and shade over the wall surface of the building over (Two or more coats ) of primer of approved make including cost of material, brushes, all labour, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)

Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade (weather coat) of approved make to make an even finished surface in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge.

Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete.

Providing and fixing Steel work welded in built up section / framed (including M.S. angle, plate, sq.bar, flat, m.s.tubular section, Heavy type hinges) work incuding cutting, hoisting,fixing in position and applying apriming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating, frames, guard bar, ladder, railings for balconies and straircase, brackets, gates and similar works as per direction of Engineer-In-Charge. (All structural steel contractor's own supply).

Providing and Fixing 150mm dia G.I. Pipe ( TATA Medium) Section for cow catcher including all materials and labour complete.

Providing and Fixing Logo 3600mm dia fixing of led light including all materials and labour complete. As per the instruction of Engineer-in-charge.

MURAL ARTISTIC WALL PAINTING

Providing of mural artistic wall painting with 1st quality of approved brand and manufacturer to give an even shade as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.

SECURITY SHED - 2Nos.

Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5 metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush,shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge.

Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge.

Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-charge.

Pre-Construction Anti-termite treatment to your site with lmidachloprid 30.5 SC or chloropyrifos 20% EC as per IS 6313 Part-III (2013) revision including all materials and Labour cost etc.

Providing and laying plain cement concrete 1:4:8 (1 cement : 4 sand : 8 stone agregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height.

First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. at all floors and all heights.

First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. at all floors and all heights.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

Footing

Column

Plinth Beam

Lintel

Chajja

Roof Beam

Roof Slab.

Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding (Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-in-charge Cold Twisted bars, Thermo-Mechanically-treated bars.

Providing 12 mm thick cement plaster in cement mortar (1:6) to the surface of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading,royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.

Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge

Providing 6mm thick cement plaster in cement mortar of (1:4) to RCC surfaces such as ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening/chipping, scraping and cleaning and finishing the plastered surface smooth using wooden floats, bars, etc. only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawing including cost of all materials, conveyance, loading and unloading, taxes, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.

Providing and fixing 20mm thick Granite stone flooring (sample of Granite stone should be approved by Engineer-In-Charge) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights.

Providing and laying Vitrified floor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of ,approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.

Supplying, fitting & fixing of Vitrified floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 13755 of size 60cm x 60cm coloured/printed series in dadoes, skirting and risers of steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge.

Supplying fitting and fixing in position 32mm thick Flush door with teak wood beading with 1mm thick laminateer to both side pasted with adhessive including fixing of fixtures like handle including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer-in-charge.

Supply and fixing uPVC sliding windows /Ventilators having a frame size of 88mm width x 52 mm ht and wall thickness of 2.2 mm the uPVC frame is reinforced throughout with galvanised steel having a thickness of 1.2 mm and a guide rail is provided on the bottom tracks of the frame for smooth sliding of the sash panels. The sash panel has a size of 57 mm width x 42 mm height and wall thickness of 2.2 mm. The sash panel is reinforced throughout with galvanised steel having a thickness of 1.2 mm.The sash panel also comprises of roller,touch lock in each sash panel,glass beading,rubber gasket,finseal for dust removal and an interlock for holding the tracks together.The sash panel is singly glazed with 5mm thick Clear glass .Complying with relevant standard specification the model and brand of the UPVC window has to be approved by the EIC before fixing.The rates shall be inclusive of all cost of materials,labour,T&P etc. complete.

Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply) at all floors and all heights.

Providing & Applying priming one coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete at all floors and all heights.

Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-charge at all elevations including all material labour complete at all floors and all heights. (External Surface)

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete at all floors and all heights.

Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion ", of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge at all floors and all heights. (Internal Surface)

Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete at all floors and all heights.

Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor.

Waterproofing Treatment of Terrace:- Ponding test first to be done, application of Nerolac-Perma Coat & Seal in 2 coats over the roof slab & continue over the parapet wall reinforced with Nerolac-Perma Non-Woven Polyester Fabric coving with 1:4 C.M admixed with Nerolac-Perma Plast-o-Proof STD @ 100 gram per 50kg cement over the joint terrace to parapet over bond coat Nerolac-Perma latex SBR (1:4:6) followed by a the protection screed (1:1.5:3) in panel of size 2 mtr x 2 mtr to drain the water towards the rain water pipe & finally filled the grooves 8mm x 10mm with Nerolac-Perma Polyseal (Poly Sulphide Sealant) complete as per manufacture specification & direction of engineer in charge. i)- Waterproofing of Roof Top ii)- Groove Filling & Sealing Exposed Screed plaster- iii)- Admixture Nerolac-Perma Plast-o-Proof STD-( Rate Excluding Protection Plaster) N:B: All the waterproofing treatment shall be executed by an authorized applicator of our company. A written guarantee on non-judicial stamp paper shall be submitted by the applicator for a minimum period of 5(Five) years from the date of completion for the satisfactory performance of the entire waterproofing treatment system.

TEXTURED PAINT :- Providing Two coat of Textured paint of approved make, quality and shade over the wall surface of the building over (Two or more coats ) of primer of approved make including cost of material, brushes, all labour, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)

Mural astistic wall painting

Providing of mural artistic wall painting with 1st quality of approved brand and manufacturer to give an even shade as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.

Supply, fitting and fixing of roof shingles of approved make and colour, manufactured from bituminous/asphalt/fibreglass (or as specified), laid over approved underlayment on prepared roof surface including cutting, overlapping, ridge pieces, edge trimming, nails, sealants, accessories, scaffolding, labour, tools, complete in all respects as per drawings, specifications and directions of Engineer-in-Charge.

PARKING & PAVING

Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works (4th Revision).

Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.

Supplying & fixing of pre cast kerb stone of size 600mm x 300mmx150mm of M-30 grade of approved make desgin ,colour & size made by block making machine with proper compaction fixed in required pattern etc.complete in all respect conforming to IS 5758:1984.

ELECTRICAL WORKS

INTERNAL WIRING.

Recessed / Surface wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havells/Eq) (Make of modular box,cover,switch & socket-Legrand Arteor/schneider Zencelo/Panasonic Vision/Eq)

GROUP-A

GROUP-B

GROUP-C

Recessed / Surface wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire Polycab/ Anchor / Havels/Eq) Average Length: 3 mtr

Recessed / Surface wiring to ceiling fan point with 1.5 sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Polycab/ Anchor / Havels/Eq) Group c

Recessed / Surface wiring to Twin control light point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire Polycab/ Anchor / Havels/ Finolex/Eq) Group C

Supply and fixing of 5 / 6 amp socket outlet with 6 Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge.

Recessed / Surface wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire Polycab/ Anchor / Havels/ Finolex /Eq)

Supply and fixing of 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Supply and fixing of 1x 6 + 1x16 amp socket outlet controlled by 1x 6 + 1x16 amp 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Supply and fixing of 6 pin 16 amp socket outlet with 16 Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Supply and fixing of 6 pin 16 amp socket outlet ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Supply and fixing of 32 amp Modular DP switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Recessed wiring of modular type 1500mA, 5V Type-A USB CHARGER 1M with 6A 250V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size, including all accesories and connection on existing switch board as per direction of Engineer in Charge. (Make- Schneider (Zencelo) / Legrand (myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent)

Supply and fixing of A.C/ Power socket outlet with industrial type socket outlet, plug top and metal chained cover in sheet steel enclosure, 20A /32A SP MCB including all accesories and connection as per direction of Engineer-in-charge.

Supply and fixing of TV / Telephone Socket outlet ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Supply and fixing of 3 x 6 amp socket outlet controlled by 2 nos 6 Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

SUBMAIN WIRING.

Recessed / Surface wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

Recessed / Surface wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (2X6+1X2.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 4 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (4X4+1X2.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 4 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (4X6+1X2.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 4 nos single core 10 sq. mm copper wire for phase and neutral and 01 no of single core 4 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (4X10+1X4)

DISTRIBUTION BOARD

Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid trip position for toggles for electrical fault conditions.(With 2 Years Warenty)

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63Amp / 40Amp FP MCB (10KA) Outgoings-10/16/20A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq)

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door Vertical type powder coated wall mounted 4 way Vertical TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A/63A/80A/100A FP MCCB (25KA) Outgoings-10/16/32A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq)

FITTING & FIXTURE

Supply, Installation, Testing and Commissioning of Plastic body Exhaust fan 200 mm sweep 900 rpm with louvers of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/ Crompton/ Usha/ Orient/Bajaj).

Supply, Installation, Testing and Commissioning of Metal body Exhaust fan 380 mm sweep 1400 rpm vheavy duty of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/ Crompton/ Usha/ Orient/Bajaj).

Supply, Installation, Testing and Commissioning of 1200 mm sweep 4 blades Decorative ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells Florence/Crompton /Usha/Orient /Bajaj).

Supply, Installation, Testing and Commissioning of 1200 mm sweep Decorative ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells SS390 /Crompton /Usha/Orient /Bajaj).

Supply, Installation, Testing, and commissioning of decorative Wall fan 300mm sweep,110watt, 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make- Havells/ Crompton /Usha/Orient /Bajaj)

Supply, Installation, Testing, and commissioning of decorative pedestal fan 450mm sweep,120watt, 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make- Havells - V2 Neo/ Crompton /Usha/Orient /Bajaj)

SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 10 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of 9 watt LED Ceiling Recessed mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of 12 watt LED Ceiling Recessed mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of 8 watt LED Ceiling Recessed mounted moveble Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Havells /Panasonic/LT/ Philips/Wipro /K lite/Crompton/Bajaj).

SITC of 3 watt LED Ceiling Recessed mounted spot light in different Colour Aesthetically designed lens based of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of Profile light, LED Strip for profile lighting with aluminium chanel and defuser, long life: 30,000 burning hours, Housing: Superior adhesive for easy and worry-free installation, Other features: 240 LEDs per meter, 900 lumen per meter & comes with a driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of LED Strip light, IP65 protection of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of 18 watt LED Ceiling Surface mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

Supply, Installation,Testing & commissioning of Decorative Vega Outdoor wall light, Metal glass , Bronze finish, Holder & Plug Type E27 , Dimensions of Light: 26 X 19 X 52 CM ; Canopy: 12 X 28 CM of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Vega / Eqivalent)

Supply, Installation,Testing & commissioning of 7W Anthracite LED Step/ Foot Light of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Phillips 34151/ Jaquar /Havells /Klite /Phillips /CG/Bajaj)

Supply, Installation,Testing & commissioning of 9W LED Integrated wall Light ( Mirror Light) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Phillips 581916/ Jaquar /Havells /Klite /Phillips /CG/Bajaj)

Supply, Installation,Testing & commissioning of 12W LED Picture Light Chrome finish of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Phillips 31440/ Jaquar /Havells /Klite /Phillips /CG/Bajaj)

Supply, Installation,Testing & commissioning of Striker Floor light, Chrome with fabric white shade & E27 base of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Phillips 581878/ Havells/ Jaquar/Klite)

Supply, Installation,Testing & commissioning of Pendant light with Copper glass Copper finishing, Net Weight (kg): 0.6,Lamp: E-27 LED 9W of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Jaquar JNL-COP-MD150031251A/Klite / Phillips/ Havells/)

Supplying, Installation, Testing & Commissioning of Concealed Light Chandeliers Color: Gold, Material: Brass, No. of heads: 12, Cap type: E14, Wattage: 12 x 4.5 W LED, Dimension (mm): Ø 610 x H 920, Weight (Kg): 20.5 of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Jaquar - Nobella / Equivalent)

Supply, Installation,Testing & commissioning of Chandelier light Description: 18 LT White Pitcher Glass with White Finishing Fixture Height: 380 mm Net Weight (kg):18 .Lamp: E-14 LED 4W x 18 Dia 1050 mm & Height 1200 mm of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Jaquar KCH-WTC-MD1503000818 /Klite / Phillips/ Havells/)

Supplying, storing, laying, testing and commissioning of 3.5 c x 70 Sq. mm A2XFY Al armoured Cable 1100 Volts etc. as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying and commissioning of 63 mm dia HDPE pipe etc as required of approved make complete with all materials & labour as per the direction of Engineer-in-Charge.

Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T , Digital Voltmeter, Digital Ammeter and control fuse etc. complete. MAKE- Legrand / Schneider/Hager/ L&T/SIEMENS/Eq.

Main Panel 250 Amp 4 P MCCB 25 KA -1 No, 160 Amp 4P Changeover - 1 no as incomer, 125 Amp 4P MCCB 10 KA -3 nos, 63/80 Amp 4P MCCB 10 KA- 4 Nos, 63/40 Amp 4P MCB 10 KA 2 Nos, , 32 Amp DP MCB 10 KA -2 Nos with copper busbars 4nos of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supply, installation,testing & commissioning of 63 Amp, DB with IP65 made of environment friendly polycarbonate PC- GFS insulation enclosed indoor electrical panel board as power switch gear and control gear assembly (PSC) in accordance with IEC 61439-2 for wall mounting/floor mounting Part No. HEN MI LDB - 1086 - 2024 The enclousers must be suitable for outdoor installation harsh environment and/ or outdoor installation- The climatic effects on the equipment’s must be considered. Bottom parts and lids of the boxes made from impact resistance polycarbonate, halogen and silicon free colour RAL7035, transparent lid with quick action fastners for tool operation. Burning behaviour according to IEC60695-2-11 glow wire test + 960 degree C. Maximum water absorption 10mg in accordance with DIN53473. Protective measures: Totally insulated (protection classII), the enclosure should have mechanical strength equivalent to IK10. Incomer:63Amp, FP, MCCB,25kA-1no Outgoing:40Amp,DP MCB 10kA-2No, 20Amp, DP 10kA,MCB-3 Outdoor/wall Mounting of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Hansel / Equivalent

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying and laying 25 mm x 6 mm Copper earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Suppy, Installation, Testing & commissioning of Aquaguard Storage Cooler-cum-Purifier Model: AG PRO PURE CHILL 120 PSS - RO+UV+CuZn, Cooling Capacity: 80 Ltrs, Storage Capacity: 120 Ltrs Make: Eureka Forbes Limited With-in-built purifier (RO+UV Based) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make - Eureka Forbes/ Equivalent)

Supplying, Installation, Testing & Commissioning of 6 Ltr Capacity 5 Star rating Electric Storage Water Heater of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Havells-Puro Turbo DX / V Guard / Jaquar)

Supplying, Installation, Testing & Commissioning of 15 Ltr Capacity 5 Star rating Electric Storage Water Heater of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Havells-Puro Turbo DX / V Guard / Jaquar)

Suppy,installation, testing & commissioning of HARD TOP, 515 ltr Deep Freezer of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Bluestar/Voltas/Western)

Suppy,installation, testing & commissioning of 500 LTR refrigerator,1star, double door frost free of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (LG/ Bluestar/ Voltas/ Samsung/ Western)

Suppy,installation, testing & commissioning of 2000 Watts 3 HP Commercial Mixer Grinder of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. Make -HANS Dominar X Pro/ EQUIVALENT

Suppy,installation, testing & commissioning of 32 L Convection Microwave Oven of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. Make -LG (MC3286BRUM)/ EQUIVALENT

Suppy, installation, testing & commissioning of bread toster 750 watt of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. Make -Havells Crisp Plus/ EQUIVALENT

Supplying, installation, testing & commissioning of 65" Smart LED Television, 4K UHD,Vibrant Viewing in Ultra High Resolution, commercial type of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Samsung/Sony)

External Illumination

Supplying, installation and commissioning of 12 W LED Verbena Square Bollard light 1000 mm long. Body : Square Aluminium Tube,Mounting : Surface - Floor Finish : Powder coated etc complete with connection as required for the work and as per direction of Engineer-in-Charge. (Make: K- Lite KL-4735/Havells / BAJAJ/ CG/ Jaquar).

Supply of 8 mtr long single arm hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat as per direction of Engg. in Charge.

Supply, installation, testing & commissioning of 3050 mm long decorative lighting pole with mild steel body step pole with grey/black powder coting fnish. The control gear tray made up off diecast alluminium body & prewired with 2.5 sqmm copper cable, 6 Amp SP MCB, 32 Amp 4 pole connector, 5 Amp 3 way terminal connector & earthing point. The Pole shall have base Plate of size (200x12) mm with provision for founation bolt fittings.Compatible for all suitable size for cable entry & exist as required of approved make with all materials & labour as per the direction of Engineer-in-Charge.(Make: K- Lite Flat Series KP-4786/ Havells / BAJAJ/CG/Jaquar).

Supply, installation, testing & commissioning of coil earthing etc as required as per the direction of Engineer-in-Charge.

Supply, installation, testing & commissioning of 30 watt LED post top light fittings integrated with LED Modules, Clear Polycarbonate optical cover, Protection class IP 65, Integral power supply, Earth connection, BIS Mark as required of approved make etc complete with all materials & labour as per the direction of Engineer-in-Charge. (Make: K -lite Ganthal KL-5027/ Havells / BAJAJ/CG/Jaquar).

Supplying, installation and commissioning of 35W LED post top light luminaries having Versatile pressure die-cast aluminium IP66 with high power LED as light source to be fixed on the ends of pole etc complete with connection as required for the work and as per direction of Engineer-in-Charge.(Make: Havells Ruby /K- Lite/ BAJAJ/ CG/Jaquar).

Supply, installation, testing & commissioning of 10 watt LED 2 Way Wall light fittings integrated with LED Modules, Protection class IP 65, Integral power supply, Earth connection, BIS Mark as required of approved make etc complete with all materials & labour as per the direction of Engineer-in-Charge. (Make: Phillips - 31450 /K -lite / Havells / BAJAJ/CG/Jaquar).

Supply, installation, testing & commissioning of IP 65 LED street Light of 90 W Capacity 6000K Colour temperature with pressure die-cast Aluminium body having in built electronic driver which have 50000 burning hour road way luminaries of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying, testing and commissioning of 3 c x 4 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying, testing and commissioning of 2c x 6 Sq. mm A2XFY Al armoured Cable 1100 Volts etc. as required of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying, testing and commissioning of 4c x 16 Sq. mm A2XFY Al armoured Cable 1100 Volts etc. as required of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying, testing and commissioning of 3.5 c x 25 Sq. mm A2XFY Al armoured Cable 1100 Volts etc. as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying, testing and commissioning of 3.5 c x 35 Sq. mm A2XFY Al armoured Cable 1100 Volts etc. as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, storing, laying and commissioning of 40 mm dia HDPE pipe etc as required of approved make complete with all materials & labour as per the direction of Engineer-in-Charge.

CCTV SYSTEM

Supply, Installation, Testing, and commissioning of STQC Certified Network IP Dome camera with 1/2.9" 4 MP CMOS Video Standard- NTSC / PAL,Scanning System Progressive,Image Sensor - 1/2.9” CMOS,Sensor Size (H x V)- 4.608 mm x 2.592 mm,Number Of Pixels(H x V)-2688(H) × 1520(V),Minimum Illumination 0.06 [email protected] (Color, 30 IRE), 0.006 [email protected] (B/W, 30 IRE), 0 lux (IR on), RAM 128 MB, ROM 128 MB, S/N Ratio 50 dB,Electronic Shutter Speed 1/3 s–1/100,000 s,IR Distance up to 30 m,Gain Control 0-100%,Wide Dynamic Range 120 dB,Noise Reduction 3D NR, Lens 3.6mm/ 4mm/ 6 mm, DC-Iris, F1.6-F3.3, MFZ etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - Honeywell/AXIS/PELCO )

Supply, Installation, Testing, and commissioning of STQC Certified Network IP Bullet camera with 1/2.9" 4 MP CMOS Video Standard- NTSC / PAL,Scanning System Progressive, Image Sensor - 1/2.9” CMOS,Sensor Size (H x V)- 4.608 mm x 2.592 mm,Number Of Pixels(H x V)-2688(H) × 1520(V), Minimum Illumination 0.06 [email protected] (Color, 30 IRE), 0.006 [email protected] (B/W, 30 IRE), 0 lux (IR on), RAM 128 MB, S/N Ratio 50 dB,Electronic Shutter Speed 1/3 s–1/100,000 s,IR Distance up to 30 m,Gain Control 0-100%,Wide Dynamic Range 120 dB,Noise Reduction 3D NR, Lens 3.6mm/ 4mm/ 6 mm, DC-Iris, F1.6-F3.3, MFZ etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - CP Plus/ PRAMA/ Honeywell/AXIS/PELCO )

Supply, Installation, Testing, and commissioning of PTZ camera -2 MP 1/2.8", progressive scan, 4.0 megapixel, CMOS, IR 150M , 25x Optical Zoom, 4.8 ~ 120 mm (25x optical zoom), Built-in IR LED, Angle of view(H) 52.01°(Wide)~1.78° (tele), Motion detection, video tampering, 120 dB WDR, 2D/3D DNR, triple stream, UL listed,IP67,Video Standard NTSC/PAL, Minimum Illumination (Color/BW) , Color: 0.005 lux (F1.5, AGC ON) 0 lux with IR,PTZ casing IK10, Micro SD, Up to 256 GB and ONVIF (Profile S, Profile G) etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - CP Plus/ PRAMA/ Honeywell/ AXIS/ PELCO )

Supply, Installation, Testing, and commissioning of STQC Approved Industrial-grade processor 64 Channel NVR with 4 SATA Port and 4K H.265 Compression. Internal Storage supports & HDDs expandable upto 20 TB . Store video clips and snapshots to external storage, such as the client's PC, through the internal connection. Store video clips and snapshots to external network storage servers etc as reqd.Up to 16 MP (4K) resolution live view and playback.Supports H.265 HEVC, H.264, Smart Codec.Notify on triggering built-in video analytic alarms from 35S cameras: Crowd, Multi Loitering, Intrusion,Tampering, Motion and Smart Motion Detection (SMD) ,Internal storage supports 4 HDDs expandable up to 20 TB (each) of internal storage.Store video clips and snapshots to external storage, such as USB device on local side or PC client on web side.Supports RAID 1/5/6 storage options for a wider range of high storage options,For use as part of video systems which comply with NDAA Section 889,The TPM (Trusted Platform Module) provides end-to-end stream and command encryption through integrated cryptographic keys etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - CP Plus/ PRAMA/ Honeywell/AXIS/PELCO )

Supply, Installation, Testing, and commissioning of 6TB Hard drive for NVR etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - WD/Seagate)

Supply, Installation, Testing, and commissioning of Commercial 43" 4K UHD(3840 X 2160) resolution Android LED display with built in 2.4 Ghz Wifi, 1.1 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 16 GB Memory, built in Double Core Mali 600 MHz GPU,with HDR 10, Dolby Audio, Built in Wifi and Cromecast, HDMI CEC, HDMI ARC, Built-in BluetoothVer.4, 20W built in speakers, HDMI-2.0 X 3, AV X 1, USB X 2, RJ45 X 1, Headphone Out x 1, SPDIF Outx 1 etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - Samsung /LG/SONY)

Supply, Installation, Testing, and commissioning of L-2 GIGA POE Switch with minimum 24 X 10/100/1000 Base-T ports and additional 4 nos SFP uplink ports. 4 x Gigabit RJ45/SFP Combo ports,Advanced L2 switching and security features,L2+ Static Routing,Switch Shall have minimum 56 Gbps of switching fabric and 41.67 Mbps of forwarding rate. Shall have minimum 15K MAC Addresses and 256 Active VLANs etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - GRANDSTREAM / DIGISOL/ D-LINK/ NETGEAR/ CISCO)

Supply, Installation, Testing, and commissioning of 8-Port Gigabit Smart Switch + 2Uplink GIGA Port ,8 x 10/100/1000BASE-T ports, 2 x Gigabit SFP ports,Advanced L2 switching and security features,L2+ Static Routing etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - GRANDSTREAM / DIGISOL/ D-LINK/ NETGEAR/ CISCO)

Supply, Installation, Testing, and commissioning of UTP 4 pair CAT 6 LAN Cable surface/ recessed with PVC conduit etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - D-LINK/ DIGISOL/ NETGEAR / CISCO)

Supply of Cat6 UTP 24 Port Jack panel loaded with Spring loaded shuttered Jack and Rear Cable manager. Should include labels with transparent clear label covers at the front and Port number at the back. 4 x 6 ganged jack configuration. Compliance to TIA/EIA-568-C.2-1, IEC-603-7, ISO 11801 Class E. ETL Verified etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - D-LINK/ DIGISOL/ NETGEAR/ CISCO)

2 Meter Cat-6 Patch cord having Conductor : 24 AWG Multi-strands, Heat Resistance : 60º C, Insulation Material : High Density Polyethylene ( Make - D-LINK/ DIGISOL/ NETGEAR/ CISCO)

Supply, Installation, Testing, and commissioning of 9U WALL mount Rack with all accessories like Ventilation Fan, amps socket & Switch , PDU eetc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - NETRACK/ MRS/ VALUE RACK/ CP PLUS )

Supply, Installation, Testing, and commissioning of 15U Equipment Rack with all accessories Ventilation Fan, amps socket & Switch , PDU etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make - NETRACK / MRS/ VALUE RACK)

Providing Labour charge for Cabling laying, Installation , testing & Commissioning of the above system etc as required.

High Mast

Supply delivery installation and testing of 12.5 mtr long semi highmast galvanised lighting mast of thickness 3.1 mm having pole dia 150 mm at top & bottom dia 350mm base plate of 25mm thick having pole arrangements for fixing of 04 no 25mm dia 750mm long foundation bolt complete resistance to wind speed as per is-875 , part-iii , octagonal shape complete assembly containing inner & lantern ring 06 way , 3 way frp Junction box with the bottom single drum winch 03 no.s 4 mm dia steel wires disc 6mm wire single from compensating disc to winch 1-1/4" dia 750 mm dia foundation bolts etc.as required provision for 06 no.s 200w LED Light luminaries .The mast will have both manual & motorise system to be operated at 3 phase 440 volt with aviation light arrangements & complete as per the site requirements of approved make as per the direction of Engineer-in-Charge.( Bajaj/Velmont)

Supply of raising lowering system comprising double drum winch, 5mm dia meter SS wire rope, trailing cable, connector,integral power tool motor, manual handle, junction box, lightening finial. (Wiring material from junction box to individual luminaire & MCB in base compartment are not included and are a part of installation).of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template etc. as required. as per the direction of Engineer-in-Charge..

Construction of suitable shallow foundation M24 x750 (6 Nos.)with 1:2:4 or M20 grade concrete for the high mast considering the safe soil bearing capasity at site as 10T/sqm. At 2X2 mit. Depth with all materials and labour charges (as per drawing) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Erection of 12.5 m high mast with all acc with the help of suitable equipments or with the help of modern engineering practices of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying and erection of LED avition obstruction light Lumainair ( Bajaj 110731) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying and fixing double door MS feeder piller box with near the high mast towerProviding the following component ( switching acc.) inside the fidder piller including internal wiring all. Complete for autometic , timely OFF/ON for operating of (6 to 8 nos) 200 LED lighgting fitting. i)63 A 4 pole MCB isolater 1 no. ii)240 V contractor- 1 no. iii) Day dial timer (GIC)- 1 no iv) By pass switch- 1 no v) outlet Terminal - 2 nos. vi) Starter for moter operation (Forward and Revers direction )- 1no,VIII) 6 AMP SP MCB 6 NOS of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supply, Installation,Testing & commissioning of of Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium non integral IP66 200 watt flood light, suitable for high mast application, highlighting architectural facade and general purpose lighting of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying and laying 25 mm x 6 mm Copper earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

SAFETY EQUIPMENTS

Providing and fixing carbon-di-oxide type 4.5 KG fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS : 2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make- Safex/ Fireshield/Kanex/ Ceasefire

Providing and fixing ABC type 6 KG fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make- Safex/ Fireshield/Kanex/ Ceasefire

Supply and installation of Rubber Mats 12mm thick of size 2000 mm x 1000mm x 12 mm thick Electrical tested with test certificate.

Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.

Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Providing and fixing Main Fire Alarm Control Panel - 4 zone with all necessory accesorries of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge..

62.5 KVA DG

Supply, Transportation, erection, testing and commissioning of 3 Phase, 415V, 50Hz, water cooled multi cylinder diesel generator set with alternator of 62.5KVA ( Make -Kirloskar / Jakson) out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete with AMF panel having IP-52 protection, Acoustic Enclosure as per CPCB IV+ norms , sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB norms etc as per following specifications mentioned below. Warrentee period of panel must be 2 years ALTERNATOR:- The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21. ENGINE:- Diesel Engine start, developing suitable BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 62.5KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc. 01. Exhaust pipe of required size and length with insulation or clading. 02. Diesel tank suitable for 8 to 12 Hours running capacity. 03. Industrial Silencer. 04. SMF Batteries with leads as per the Manufacturer standards AMF PANEL:- Cubical, Compartmentalized, AMF Panel Baord with all Power & Control Contractors,for both main & dg along with battery charger,relay,timer & all required accessories, Meters and other accessories, Internal Wiring, connection, inter-connection etc. for Trouble Free smooth function for 62.5KVA DG Set complete with Battery Charger & leads as required BASE PLATE:- Common Base Plate of required size for mounting of Engine Alternator Set fabricated from MS Channerl and vibration damping arrangement with cushy foor mounting including paintng etc. as required.

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying and laying 25 mm x 6 mm Copper earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Transformer

Supply ,Installation , testing & commissioning of Double pole Mounted 63 KVA , 11/ 0.4 KV (AL) Transformer, BIS Energy Loss level II, Ammendment-4 ,using WPB (GI) Pole 160x152 (11Mtr. Long, 30.44 KG/Mtr.)-DP including all other accessories and TPCODL approved material cost of all material, Labour, Transportation etc complete as per direction of Engineer-in-charge.

Construction of 3 phase 3wire 11kv Over head line using 55 sqmm AAC insulated conductor on WPB ( GI) Pole of size - 160 x 152 mm(11mtr long,30.44kg/mtr (50 Mtr/span) with 1 nos Cut point including all other accessories and TPCODL approved material cost of all material, Labour, Transportation etc complete as per direction of Engineer-in-charge.

Electrical Gadgets

Supplying, Installation, Testing & Commissioning of 2 Ton Tower AC machine of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Voltas/Bluestar/ Carrier /Daikin)

Supplying, Installation, Testing & Commissioning of Extra Refrigeration Copper pipe with insulation & drain pipe for Tower AC of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying, Installation, Testing & Commissioning of Hi-wall 2 Ton Split AC of 5 Star Rating of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Voltas/Bluestar/ Carrier /Daikin)

Supplying, Installation, Testing & Commissioning of Hi-wall 1.5 Ton Split AC of 5 Star Rating of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Voltas/Bluestar/ Carrier /Daikin)

Supplying, Installation, Testing & Commissioning of 5 Kva wall hanging Stablizer of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Vguard /Voltas/Sakti)

Supplying, Installation, Testing & Commissioning of 4 Kva wall hanging Stablizer of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Vguard /Voltas/Sakti)

Supplying, Installation, Testing & Commissioning of Out door stand for fixing of Out door unit of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supply & Installation of Extra Copper pipe with wire & Drain pipe etc complete with all materials & labour as required as per the direction of engineer incharge.

Please Enable Macros to View BoQ information