Annual Repair and maintenance of residential Govt. quarters buildings during the year 2025 26 SH Repair and maintenance of existing Pump Motors inc water supply and sanitary arrangement system etc. complete in Rabinrapally, Gandhighat and Melarmath Q

Providing & fitting fixing 2HP ISI marked BE pump for 11/2" x 11/2" suction & delivery pipe complete with single phase ISI CROMPTON motor & starter to main switch pilot lamp in/c necessary earthing & wiring of approved quality etc. complete as per direction of the Eng-In-Charge.(No additional cost for connection upto main switch will be paid separately)

Rewinding of 2HP single phase, 230 volts AC motar in/c. dismantling cleaning, necessary materials varnihsing heating, assembing and fitting, testing etc. complete.

Repairing of 2 HP capacity 1 1/2" x 1 1/2 swatting & delivery BE water pump in/c. dismantling cleaning replace ball bearing key gland nut shaft impellor welding leath cutting & assembling with laying asbestos roof and fitting leveling with motor etc. complete.

Providing fitting capacitor for 2 HP & 1 HP single phase motor etc.

Providing & fixing starter 440 bolts 230 volts of 2 HP & 5 HP motar.

Providing and fitting coupling for 2 HP & 5 HP rubber disc for 2 HP & 5 HP pump set.

Rewinding of 5 HP 440 volts AC motar in/c dismantling cleaning, necessary materials varnishing heating, assembing and fitting, testing etc. complete.

Repairing of 5 HP capacity 1 1/2" x 1 1/2 swatting & delivery BE water pump in/c. dismantling cleaning replace ball bearing key gland nut shaft impellor welding leath cutting & assembling with laying asbestos roof and fitting leveling with motor etc. complete.

Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling etc. complete as per CPWD pecification and direction of the Engineer - in - charge. External work a) 25mm dia. Nominal bore

b) 40 mm dia. nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall a) 20 mm nominal outer dia .Pipes.

b) 25 mm nominal outer dia .Pipes.

c) 40 mm nominal outer dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. Exposed on wall a) 25mm nominal bore

b) 40mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete as per CPWD specification and direction of the Engineer - in - charge.(New work) a) 25 mm nominal bore

b) 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): a) 25 mm nominal bore

b) 40 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: a) Single socketed pipe - 75 mm OD

b) Single socketed pipe - 110 mm OD

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type-A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: i) Single equal tee without door a) 75x75x75 mm

b) 110x110x110mm

ii) Bend 87.5° a) 75mm

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity-White

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. a) 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms.

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 470x420 mm bowl depth 178 mm.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : a) For 100 mm dia. Pipe

b) For 75 mm dia. Pipe

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. a) Flexible pipe 32 mm dia

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85gms.

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete : a) 20 mm nominal bore

b) 25 mm nominal bore

Providing and fixing PTMT pillar cock of approved quality and colour . 15mm nominal bore, 107mm long, weighing not less than 110 grams.

Providing and fixing gun metal non-return valve of approved quality (screwed end): a) 32 mm nominal bore Vertical each

b) 40 mm nominal bore Horizontal each

Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.

Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineerin- charge. i) 32 amps

Supplying & fitting fixing of single phase motor starter/panel unit (with 2 pole contactor, overload relay, volt meter & amps meter), 32 amps main switch (220 volt) of Havels/ BCH/L&T make in KIOSK including necessary electric wiring and GI pipe earthing etc. complete as per direction of the Engineer-in-charge.For 3 HP submersible motor.

Labour charge for washing GI pipe internal for removing iron deposited iron etc. in/c. replacement of the pipe from original position as per direction of Eng.-in –Charge a)15 mm. to 40 mm.dia.

Clearing & uprooting of banian trees in/c roots from the roof & walls of different office buildings/qtrs in/c disposal of rubbish etc upto 50.00mtr as per direction of the Eng-In-Charge.

Labour charge for cleaning inspection chamber with night soil & refusal water as per direction of the Eng-In-Charge.