Repairs / Modification to Sucker Machine, Existing Vacuum Pump, Prime mover Tata 709 and procurement of New vacuum pump for Municipal Committee Baramulla

Amount

Dismantling of old damaged water tank from chassis of Prime Mover Tata 709 of Municipal Committee Baramulla by way of cutting welding joints, removal of rusted old nut & bolts using cutter/grinder/or acetylene gas cutting and removing tank with suitable hoisting mechanism and using proper tool and tackles.

Dismantling of old sucker machine 2500 ltr capacity from chassis of damaged Tata 407 prime mover by way of removing alongwith all pipings, valves and attachments including vacuum pump, Pto shaft etc .The job also includes cutting of welding joints and cutting of rusted nut and bolts using cutter/grinder/or acetylene gas cutting and then lifting of sucker machine equipment using suitable tool and tackles and suitable hoisting mechanism and placing sucker machine safely.

Fitting and assembling sucker machine on chassis of Prime Mover Tata 709 using suitable hoisting mechanism by way of cutting of chassis by 2' and then re-fitting of rear channel along with crash barrier to make the vehicle shorter to make it feasible for working in small lanes as desired by MCD Baramulla. The job also includes re-fitting of all the necessary attachments piping’s, flanges, valves etc all complete and providing anti-vibratory sheet between sucker tank and chassis with new TVS Nut and bolts, U-clamps and welding wherever required to make the machine stable and maintain gradeability during transportation and working keeping in view of the topography of District Baramulla.

Repairs to front bumper, side fenders LH&RH , Bonnet, Doors LH &RH and wherever required by way of denting, patching and repairs including gas welding and then painting of Prime mover along with sucker machine with letter writing.

Providing and fitting of rear wheel multi-layered leaf spring suspension 14 layers LH by way of dismantling broken rear wheel leaf spring suspension from the prime mover i.e Tata 709 of MCD Bla using suitable tool and tackles with proper jacking and support to the chassis and then refitting of new complete leaf spring assly compatible with said vehicle by replacing following items: a) Master leaf b) Extra full length leaves c) Graduated -length leaves d) centre clip e) U-bolt f) Rebound clip g) centre clamp h) centre bolt

Providing and Fitting of new PTO pump compatible with GB-27 gearbox of Tata 709 Prime mover along with PTO shaft and testing thereof.

Repairs to the existing vacuum pump of Sucker machine by way of removing damaged parts and fitting of new parts viz bearings (ball, taper) , oil seals inner sleeves , cylindrical vanes, bearings, ceramic bearing, LS30 vacuum Blade , S.G. iron rotor etc and installation of Vacuum pump along with allied accessories including of reservoir tank and fitting of main and return oil pipes with vacuum pump by way of fabrication new bracket with nuts and bolts and clamps wherever required and then testing of same thereof.

Providing, Installation, Testing and commissioning of new Vacuum pump (with blow back function) for sucker machine with following specifications :- a. FREE AIR DISPLACEMENT-340 M3/Hr b. LPM-4000 c. VACUUM IN MM HG -540 MM,92% d. RPM - 900-1300 RPM e. PRESSURE - 1.5 BAR f. HP - 10 HP g. DEEP CLEANING - 15-20 Feet h. DISTANCE CLEANING - 200-250 Feet i. DRIVE MODE - DIRECT DRIVE AND FAN BELT OPERATED j. APPLICATION/USAGE - COMPATIBLE WITH SEWER SUCTION MACHINE , JETTING MACHINE, SAFETY TANKER etc k. PUMP MUST BE HAVING BLOW BACK FUNCTION TO EMPTY SUCKER TANK RAPIDLY l. Equivalent to JUROP PN58D VACUUM PUMP m. MIN 01 YEAR REPLACEMENT WARRANTY

Providing and fitting of new M-oil filter (01 No.), Diesel Filter (01 set), Air filter I/O (01 set) byway way of replacing old filters using suitable tools and tackles and then draining of old POL and refilling following items: a) M-oil 15 w 40 (10 ltr), b) Coolant (03 ltr), c) Gear oil (3.5 ltrs gear box , 7 ltrs diff/Rear axle d) Steering oil filter( 01 no)

Reinforcement to suspension system to dumper by way of dismantling complete leaf spring assembly right (rear) and then retensioning of leaf spring and reassembling by way of P/F of following items : a) Main leaf spring = 1 No. b) Auxiliary leaf spring=1 no c) Centre bolt=1 no d) U-bolt with nut=2 no e) U clamps=4 no f) Bushes with shims=4no

Four wheel checking of vehicle by way of P/F of following items: a) oil seal front and rear = 4 No's. b) Wheel bearing grease =3kg c) Brake booster kit =2 kit d) Brake lining set = 4 set e) Tie rod end set = 2 set f) Drag link end set = 2 set g) Split pins = 1 pkt h) Wheel bearing inner = 1 no i) Wheel Bearing outer = 1 no J) Brake oil = 2 ltr

Complete greasing.

Fabricating/Providing fitting of Seat cover to Tata 709 of MCD Bla. The job includes disassembling of seats from body by suitable tools and tackles and then removing old seat covers and then fitting the seats to the body back after fitting of new seat covers fabricated using following material:- a) American Cloth Velvet = 4 Mtr b) Leather (Mayur) = 4 Mtr c) Foam 14 mm 3’ x 6’= 4 sheets d) Aster = 6 Mtr e) Packing sheets= 1.5 sheets f) Pins, doori, solution = 1 pkt each

Electrical repairs to TATA 709 by way of pressure Horn (01No), Siren 12V, Side Indicator (02 No), Head Light Bulb (02 No.), Head Light Relay (01No) Horn relay (01 No), wiper Blade (01 Set), Cabin Light (01 No.) wire 1.5 sqmm (10mtr), Battery Terminals (02 No).

M/S MEHRAJ AUTOMOBILES

New Dar Automobiles

M/s Sopore Engineering Works