Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.8 LAccepted-AOC RP IV 23 PUNNAKADAVU JN RAMANTHALI P O KANNUR 670308 | KANNUR | KANNUR | KERALA | 670308 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹50.2 L+₹3.4 L (7.17%)Rejected-Finance 137 D THEJAS BURNASHERRY KANNUR KERALA 670013 | KANNUR | KANNUR | KERALA | 670013 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹50.3 L+₹3.5 L (7.52%)Rejected-Finance DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹50.4 L+₹3.5 L (7.55%)Rejected-Finance | L4 | Rejected-Finance Other than lowest tenderer | |
| 5 | L5₹50.7 L+₹3.9 L (8.28%)Rejected-Finance PMC 24 528 GROUND FLOOR NEAR PAYYANUR SERVICE CO OP BANK KOTTY BRANCH PAYANNUR KANNUR KERALA 670307 | PAYYANUR | KANNUR | KERALA | 670307 | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
8 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2023_MES_604147_1
GE MAINT EZHIMALA 8582
Open Tender
Civil Works
Item Rate
90 days
EZHIMALA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹1 L
Yes
22 Aug 2023
19 Jun 2023
10 Jul 2023
19 Jun 2023
8 Jul 2023
3 Jul 2023
20 Jun 2023 - 27 Jun 2023
Amount
Notes:-The following things need to be considered while quoting the rates:- 1. Contractor need to do preparation and painting of kerb stone / crash barriers by mechanical methods only. 2. Contractor need to ensure the safety of labours working at heights with taking insurance policy, providing proper PPE kit and adhere all safety norms. 3. Contractor need to remove all debris obtained from work without any delay to the dumping yards shown by department anywhere inside INA Ezhimala area. 4. Contractor need to understand the importance of POP and should employ sufficient labours to meet the requirements. 5. Contractor should procure the entire quantity of paint as per CA in single purchase and all the buckets should be numbered and shown to Engr in Charge with in 20 days of acceptance. If there is any valid reason for delay in procurement, the reason shall be informed to Engr in Charge on time in writing. 6. All the surfaces should be cleaned with water jet wash/ mechanical means before application of paint. All painting work will also be done through mechanical means. 7. No electricity will be supplied by MES. Contractor should make own arrangements for transportation of water needed for washing, generator for electricity etc without any extra charge to the department. 8. Contractor should ensure proper covering of areas adjecent to painting with plastic sheets/ papers to avoid dripping marks of paint. Contractor should clean then and there if any painting drops/marks immediately before shifting to next place. 9. The scope of work is to be carried out from ground level to nearly upto 45 metres of height 10. Quoted rates are deemed to be included for using mechanical means for surface preparation and application of paint as per manufaturer's instructions all as specified and directed by Engg-in-Charge. 11. Quoted rates are deemed to be included for scaffolding as required. Contractors should arrange necessary scaffolding and all safety precautions for workers at the time of carrying out works as described in Sch 'A'/ BOQ. 12. Contractor should visit the site before quoting the tender to assess the resources required to execute the work as the site include prestigeous buildings of INA.
M&L for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on wall including necessary scaffoldings complete all as specified and as per manufacturer's instructions and as directed.
M&L for preparation of old treated surfaces and applying one coat of acrylic emulsion (exterior grade) antifungal paint on wall including necessary scaffoldings complete all as specified and as per manufacturer's instructions and as directed.
M&L for preparation of old decorated surfaces and applying one coat sandtex matt finish on wall including necessary scaffoldings complete all as specified and as per manufacturer's instructions and as directed.
M&L for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on ceiling including necessary scaffoldings complete all as specified and as per manufacturer's instructions.
M&L for preparation of old decorated surfaces and applying one coat of white wash on ceiling including necessary scaffoldings complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description including rafter , purlins etc..(up to a height of 20 mtr) over 10 cm width or girth and applying one coat of epoxy paint using mechanical sprayer including necessary scaffoldings complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description including rafter ,purlins etc..(up to a height of 9 mtr) over 10 cm width or girth and applying one coat of synthetic enamel paint on steel surfaces including necessary scaffoldings complete all as specified and as directed.
M&L for preparation of old plastered surfaces by using water jet washer and applying one coat of acrylic emulsion paint (exterior grade) on surfaces of parapet wall/ kerb stone guard wall etc with using mechanical sprayer to paint complete all as specifed and as directed.
M&L for complete removal of existing treatment and preperation of surface by water jet washer and applying two coats of synthetic enamel paint on surfaces parapet wall / kerb stone over and including priming paints plaster coat etc. with using mechanical sprayer to paint complete all as specifed and as directed.
M&L for preparation of old plastered surfaces by using water jet washer and applying one coat of synthetic enamel paint on surfaces of wall / kerb stone over and including priming paint plaster coat etc. with using mechanical sprayer to paint complete all as specifed and as directed.
All as per item No.11 above but two coats of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for washing rubbing down and stopping of painted surfaces and applying two coats of antifungal paint using UNIGLOSS delux multisurface paint system or equivalent including necessary scaffolding complete all as specified and as directed and as per manufacture's instructions.
Grinding & polishing (Mirror finish) to existing stone topping (Kota, Marble etc..) of any description at floors or in surfaces with electric grinding machine & hand grinding machine complete all as specified and as directed.
M&L for painting lines, dashes, arrows, letters etc on road, pavement and the like not exceeding 10 cm and 2.0 mm thick using hot thermoplastic road marking paint for centre line and pedestrain crossing mixed with reflectorising glass beads at 250grams/Sqm all as specified on finished road surfaces in molten state using suitable mechanical sprayer complete all as specified and as directed by Engineer in charge.
M&L for 20mm thick granite (of any type) tiles machine cut, in flooring,skirting, dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 20 mm thick rendering with cement mortar 1:6 complete all as specified and as directed.
M&L for preparation of old painted surfaces n.exc 10cm width or girth and applying one coat of synthetic enamel paint on steel/iron surfaces including rafter, purlins ( upto 9 mtr height) and sign board post etc. complete all as specified and directed by Engr-in-Charge.
M&L for one coat of synthetic enamel paint on wall of any description match with existing colour including preparation of old surfaces complete all as specified and as directed.
M&L for complete removal of existing treatment from the surface of any description over 10cm in width or girth and applying wood filler liquid transparent and two coat of synthetic varnish complete all as specified and as directed.
M&L for preperation of old treated surfaces of floor and applying one coat of terracota paint on floor/wall surfaces complete all as specified and as directed.
M&L for premix bitumen/ readymix bitumen filled in potholes or unlevelled road surfaces after cleaning the surface thoroughly using broom, gunny bags etc. The bitumen surface shall be levelled and matched with adjacent road surfaces and should be tamped and consolidated with manual / mechanical methods complete all as specified and as directed.
M&L for preparation of old decorated wall surfaces and applying one coat of oil bound distemper complete all as specified and as directed.
M&L for complete removal of existing treatment and applying two coats of acrylic emulsion paint (interior grade) on wall over a coat of acrylic primer over a coat of putty complete all as specified and as per manufacturer's instructions.
M&L for preparation of old treated MP roof tile surfaces by cleaning with by wire brushes to remove all existing fungal growth etc and applying one coat of antifungal paint using UNIGLOSS deluxe multi surface paint or equivalent including necessary scaffolding using suitable mechanical sprayer all as specified and as directed by Engineer in charge and as per manufacturer's instructions.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or in mortar complete all as specified and as directed.
M&L for stone grit for cushion bed below interlocking paver blocks complete all as specified and directed by Engineer in charge.
M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed.
All as per item No.28 above but except tiles complete all as specified and as directed.
Dismantling and cleaning for refixing of sadarahalli stone cladding fixed with clamps including necessary scaffolding/boomlift arrangement of appropriate design upto a height up to 30 meters from finish/average ground level complete all as specified and as directed.
S&F 20 to 25 mm flame finished sadarahalli machine cut stone cladding laid dry fixed with stainless steel clamp and anchor fasteners and headless bolts on vertical surface of wall and column by the following method:- a) Make suitable depression (approx. 5mm width and 25 mm depth on vertical face of stone fix the clamp). b) Make suitable drill hole to the surface of stone and wall/column to fix anchor fasteners. c) Make good the surface of drilled portion (where bolts are inserted) using universal surface filler(Dr. Fixit/Fosroc/supertak or equivalent) Note:- Supply only hilti make anchor fasteners and clamps and bolts will be measured and paid separately.
All as per item no 31 above but except sadarahalli stone complete all as specified and as directed.
Supply only hilti make stainless steel anchor fastner- 10 x 80mm and stainless steel clamp 5 x 50 mm for fixing of sadrahally stone cladding complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
M&L for providing polyester foil coated aluminium alloy (metal planks) for false ceiling in repair as per manufacturer's instructions complete all as specified and as directed.
All as per item ser No 35 above but fixing only complete all as specified and as directed.
M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint to flag mast (approximately 45m height) complete all as specified and as directed by Engineer-in-Charge. (Flag Mast of Nalanda Block)
Benchmark Engineers and Contractors
KDR CONSTRUCTION
PADMANABHAN. K.V
Gates Infra Construction Co
RS ENTERPRISES
Sreekrupa Enterprises
M/s K V Ramachandran
SATHEESAN.T.K
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .