Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹22.1 Cr
EMD Value
₹22.1 L
Closing Date
26 Nov 2026, 6:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, R&B Division, Jamnagar
Construction of missing link Jamsar to Ranjitpar road and major bridge across Aji river, Ta.: Joidya, Dist.: Jamnagar.
364855
16 of 2026-27
Open
Civil Works
Works
Jamnagar
17 documents required · 17 mandatory
₹18,000
Executive Engineer, R&B Division, Jamnagar
₹22.1 L
7 Nov 2026
7 Nov 2026
7 Nov 2026
26 Nov 2026
7 Nov 2026
120 days
Name of Work : Construction of missing link Jamsar to Ranjitpar road and major bridge across Aji river, Ta.: Joidya, Dist.: Jamnagar.
BILL OF QUANTITIES
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
1 Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling 4.000 Hect. 28455.09
and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of
unserviceable materials
(C) By mechanical means in area of light jungle
2 Box cutting the road surface to proper slope and camber for making a base for road work 1146.000 Cu.Mt. 111.85
including removing the excavated stuff and depositing on the road side slope as directed upto
3 Earthwork for embankment including breaking clods, dressing with all lead and lift and including 52841.000 Cu.Mt. 333.85
watering rolling and consolidation of subgrade in layers at O.M.C. to required dry density
including filling the depression which occur during the process using power roller 8T to 10T.(E)
From Borrow areawithin 15km lead
4 Earth work for embankment for SUBGRADE with Effective CBR 8 % including breaking clods, 14189.000 Cu.Mt. 357.02
dressing with all lead and lift and including watering, rolling and consolidation of subgrade in
layers at O.M.C. to required dry density, including filling the depressing, which occurs during the
process using power roller of 8 tonne to 10 tonne all as per specification(as per 5th Revision).
5 Construction of Granular Sub Base (Grading- VI) 200 mm by providing coarse graded material of 4877.000 Cu.Mt. 792.85
grading as per Morth Spection (5th Revision), spreading in uniform layers with motor grader on
prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with
vibratory roller to achieve the desired density, complete as per MORTH specification.
6 Providing and filling in foundation with ordinary Cement concrete M10 mix and providing 1127.000 Cu.Mt. 3362.25
necessary vertical pin headers including formwork, vibrating, ramming and curing complete.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
7 Providing and casting in situ controlled trimix cement concrete M-250 for 200mm thick as 2674.000 Cu.Mt. 5582.27
directed including providing and laying M.S. side rail of road thickness with necessary nut bolts
plates fixing as per width applying plate vibrator (elcetric or diesel on channel compressor with
vacumme dewatering system by using all necessary equipment and materials and machinery
such running erected vibrator on prelaid M.S. channel for leveling vacuum pump floating and
power travelling using Floor hardner of Approved make, cutting the joints at regular interval and
with filling the joints with bitumin as directed by Engineer In charge
8 Providing and placing in position High Yield Strength Deformed (HYSD) bars reinforcement (TMT 203.720 M.T. 73768.02
Fe 550D grade) conforming to IS 1786 of all categories of various components as per detailed
drawing including cutting, bending, hooking, tying and welding with 18 gauge mild steel binding
wires, supporting in position to ensure lines and levels during concreting, maintaining proper
cover / spacing etc. complete as per specification and detailed drawing.
For Piers, Abutment, Returns, Raft, Walls, Top Slab, RCC Retaining wall with Foundation, RCC
Crash barrier, Approach Slab, Wearing Coat, RCC Retaining wall, RCC Kerb etc.
9 Supplying , stacking, spreading , rolling and watering Hard Murrum as directed for side shoulder 856.000 Cu.Mt. 479.75
as directed with all lead & lift.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
10 Cautionary Warning Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 14.000 No. 3906.19
4mm ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. equilateral triangle as per design
of IRC-67-2012. Pre treated with phosphating process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy paint ; reflectorised with High Intensity
Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB
Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm;
bestquality epoxy coatings in black and white bends. The details of symbol for each board shall
be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size
45 x 45 x 60 Cms. for each leg including excavation, curing etc.complete under the supervision of
engineer in charge. A warranty for 7 years for the Retro reflective sheeting from original
manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab
for the product offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective
11 STOP Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP 2.000 No. 6704.36
(Aluminum composite Panel); size 90 cms. Octagonal as per design of IRC-67-2012. Pre treated
with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint ; reflectorised with High Intensity Prismatic Grade retro
refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long
stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black
and white bends. The details of symbol for each board shall be as per the instruction of engineer
in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg
including excavation, curing etc.complete under the supervision of engineer in charge. A
warranty for 7 years for the Retro reflective sheeting from original manufacturer & a certified
copy of 3 year outdoor exposure test report from third party test lab for the product offered
shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
12 Village name Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm 2.000 No. 6397.43
ACP (Aluminum composite Panel); size 90x60 cms. rectangular as per design of IRC-67-2012. Pre
treated with phospheting process & acid etching; coated with one coat of epoxy primer and two
coats of best quality epoxy paint ; reflectorised with High IntensityPrismatic Grade retro
refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.3mtr long
stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black
and white bends. the details of symbol or inscription / numerals for each board shall be as per
the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x
60 Cms. for each leg including excavation, curing etc.complete under the supervision of engineer
in charge. A warranty for 7 years for the Retro reflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report from third party test lab for the product
offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting
13 Direction (Junction) Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 2.000 No. 21287.51
4mm ACP (Aluminum composite Panel); size 244x122 cms. rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic
Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications;
4.0mtr (2 Nos.) long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required
and frame fabricated from suitable size iron angle of 50x50x5mm; painted with bestquality
epoxy coatings in black and white bends. The details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x
Cms. for each leg including excavation, curing etc.complete under the supervision of engineer in
charge. A warranty for 7 years for the Retro reflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report from third party test lab for the product
offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
14 Facility Informatory Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 2.000 No. 3990.64
4mm ACP (Aluminum composite Panel); size 80 x 60 cms. rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic
Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications;
3.6mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and
frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy
coatings in black and white bends. The details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x
Cms. for each leg including excavation, curing etc.complete under the supervision of engineer in
charge. A warranty for 7 years for the Retro reflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report from third party test lab for the product
offered shall be submitted by contractor. (B) Class-B Type-4
Retro Reflective sheeting
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
15 Place Identification Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 2.000 No. 12341.52
4mm ACP (Aluminum composite Panel); size 150x90 cms. rectangular as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic
Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications;
4.0mtr (2 Nos.) long stand post of Iron Angle 75 x 75 x 6mm / 65NB
Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm;
bestquality epoxy coatings in black and white bends. The details of symbol for each board shall
be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size
45 x 45 x 60 Cms. for each leg including excavation, curing etc.complete under the supervision of
engineer in charge. A warranty for 7 years for the Retro reflective sheeting from original
manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab
for the product offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
16 Regulatory / Mandatory Sign :-Providing and fixing sign boards made out of 2mm aluminium 10.000 No. 3540.12
sheet / 4mm ACP (Aluminum composite Panel); size 60 cms. Dia Circle as per design of IRC-67-
2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic
Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications;
3.6mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and
frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy
coatings in black and white bends. The details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x
Cms. for each leg including excavation, curing etc.complete under the supervision of engineer in
charge. A warranty for 7 years for the Retro reflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report from third party test lab for the product
offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting.
17 Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin 645.000 Sq.Mt. 367.72
surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including
reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface
applied glass beds as per IRC:35-2015. The finished surface to be level, uniform and free from
streaks and holes. zebra patta / bump patta lane/center line/ edge line/cut patta. The white
color marking should provide liminance coefficinet on cemend road shalll be min
mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the service life during the day
time. The marking should meet the performance criteria for night time reflectivity, wet
reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015. Warrenty for retro
reflectivity shall be 2(Two) years.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
18 Cat Eye / Road Stud/RPM: Supplying of Molded Twin Shanks Raised Pavement Markers made of 745.000 No. 326.23
polycarbonate and ABS moulded body and reflective panels with Micro prismatic lens (No Glass
bead lens) capable of providing total internal reflection of the light entering the lens face and
shall support a load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and complying to
Specifications of Category A of MORTH Circular No RW/NH/33023/10-97-DO Ill Dt 11.06.
The height, width and length shall not exceed 20 mm, 130 mm and 130 mm and with minimum
reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/-5 degree. The
strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/-
mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kgf.
Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using
epoxy resin based adhesive as per manufacturer's recommendation and The color of the marker
should be as per the IRC 35-2015 and as directed by Engineer-in-charge.
19 Providing and fixing 5th Kilometer stone of precast C.C. 1:2:4 including necessary reinforcement 2.000 No. 1935.15
as per I.R.C. type design in C.C. 1:4:8 including painting,lettering etc. complete (For N.H., S.H. and
20 Providing and Fixing Ordinary Kilometer stone of precast C.C. 1:2:4 including necessary 1.000 No. 704.33
reinforcement as per I.R.C. type design in C.C. 1:4:8 including painting,lettering etc. complete
(For O.D. road V.R.)
21 Providing and fixing Hectometer as per I.R.C. type design including painting, lettering etc. 12.000 No. 356.50
complete.(ii) Fixing in C.C. 1:5:10
22 Providing and fixing Indicator stone of approved stone as per I.R.C. type design in C.C. 1:4:8 150.000 No. 343.27
including white washing etc. complete.(ii) Fixing in C.C. 1:5:10
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
23 Route Marker sign :-Providing and fixing sign boards made out of 2.0 mm aluminium sheet / 4 4.000 No. 3842.20
mm ACP (Aluminum composite Panel); size 60x45cm rectangular plus 30x25cm additional plate
as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best quality epoxy paint ; reflectorised with High
Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 3.6 mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS
Pipe as required and frame fabricated from suitable size iron angle of 35x35x3mm; painted with
bestquality epoxy coatings in black and white bends. The details of symbol or inscription /
numerals for each board shall be as per the instruction of engineer in charge. The fixing at site
shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing
etc.complete under the supervision of engineer in charge. A warranty for 7 years for the Retro
reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test
report from third party test lab for the product offered shall be submitted by contractor. (B)
Class-B Type-4 Retro Reflective sheeting
24 Hazard Marker Sign :-Providing and fixing sign boards made out of 2.0 mm aluminium sheet / 4 20.000 No. 3518.69
mm ACP (Aluminum composite Panel); size 90x30 cms. rectangular as per design of IRC-67-2012.
Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and
two coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic Grade retro
refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 1.8mtr long
stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black
and white bends. The details of symbol for each board shall be as per the instruction of engineer
in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg
including excavation, curing etc.complete under the supervision of engineer in charge. A
warranty for 7 years for the Retro reflective sheeting from original manufacturer & a certified
copy of 3 year outdoor
exposure test report from third party test lab for the product offered shall be submitted by
contractor. (B) Class-B Type-4 Retro Reflective sheeting
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
25 Chevron sign :-Providing and fixing sign boards made out of 1.5mm aluminium sheet / 3mm ACP 36.000 No. 3711.75
(Aluminum composite Panel); size 60x50cm rectangular as per design of IRC-67-2012. Pre
treated with phospheting process & acid etching; coated with one coat of epoxy primer and two
coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic Grade retro
refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.3 mtr long
stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS
Pipe as required and frame fabricated from suitable size iron angle of35x35x3mm; painted with
bestquality epoxy coatings in black and white bends. the details of symbol or inscription /
numerals for each board shall be as per the instruction of engineer in charge. The fixing at site
shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing
etc.complete under the supervision of engineer in charge. A warranty for 7 years for the Retro
reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test
report from third party test lab for the product offered shall be submitted by contractor. (A)
Class-B Type-4 Retro Reflective sheeting
26 Painting two coats after filling the surface with synthetic enamel paint in all shades on new 360.000 Sq.Mt. 81.81
concrete Kerb surfaces
27 Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash 600.000 Rmt. 3468.34
barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground
level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre,
1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot
dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the
vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per
28 Excavation for Foundation of Piers, Abutment foundations in sand, gravel, clay, soft soils, 4774.370 Cu.Mt. 523.28
murrum, hard murrum, boulders, very stiff or sticky clays, soft rock, etc. including shoring,
strutting and dewatering as necessary and depositing of the excavated stuff as directed for all
lead, back filling the excavated pit by approved excavated material etc. complete as per
Depth upto 3.0 m below GL
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
29 Providing and laying rubble Soling (each stone weighting not less than 40Kg.) including and 471.000 Cu.Mt. 1092.52
packing and filing in the interestices with quarry-spalls.
30 Providing and casting in situ ordinary cement concrete M:10 for RCC Raft and cut-off walls 208.000 Cu.Mt. 3362.25
including necessary shuttering laying, vibrating, ramming and curing complete.
31 Providing and casting in situ ordinary cement concrete M:15 for Bedding of Pipes as per detail 569.000 Cu.Mt. 3789.70
drawing, including necessary shuttering laying, vibrating, ramming and curing complete.
32 Supplying and fixing Reinforced concrete heavy duty non‐pressure pipes with collars for culverts 350.000 Rmt. 4710.56
including setting and joining the pipes in C.M. 1:2 watering and laying (to level or slope) of I.S.
class NP4 of following internal diameters. 900 mm
33 Providing and casting in situ Ordinary cement concrete M:250 for R.C.C. Raft and cut-off walls 1935.000 Cu.Mt. 4343.00
including necessary shuttering laying, vibrating, ramming and curing complete.
34 Providing and laying rubble for appron (each stone weighting not less than 40Kg.) including and 295.000 Cu.Mt. 1092.52
packing and filing in the interestices with quarry-spalls.
35 Providing and filling in foundation with ordinary cement concrete M15 grade and providing 551.000 Cu.Mt. 3789.70
necessary pin headeres including formwork, vibrating, ramming, compaction, leveling, curing,
36 Providing and casting in-situ controlled cement concrete of M30 grade for RCC work for Raft, 566.000 Cu.Mt. 4875.27
Walls & Top Slab, with 20mm down coarse aggregate of the required size for any depth
including dewatering, scaffolding / centering, shuttering, mixing, placing in position,
consolidating with mechanical vibrators, curing, deshuttering carefully, making good the
damages, fixing embedment, inserts, pockets, wherever necessary as per specification and
37 Providing and casting in situ controlled cement concrete M-200 for R.C.C. return as per drawings 807.000 Cu.Mt. 5217.59
including centering shuttering, scaffolding where necessary, laying vibrating, curing and finishing
(a) Height upto 5m
38 Providing and laying ‐ Fitter Media 600mm thick directed at the back of abutments, returns and 1586.200 Sq.Mt. 1268.86
wing walls as per detailed specifications.
39 Providing Weep holes in RCC abutment and retaining wall with 100mm dia PVC pipe and non- 1895.000 No. 88.76
corrodible grating and geotextile, extending through the full width of the structure with slope of
1V:20H etc. complete as per drawing and technical specification.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
40 Proving and filling in position Pre-Moulded Asphalt joint Filler 20mm size as directed by Engineer- 50.400 Rmt. 611.13
41 Providing and casting in-situ controlled cement concrete of M40 grade for RCC Crash barrier with 48.600 Cu.Mt. 5283.31
20mm down coarse aggregate of the required size including formwork, placing in position,
consolidating with mechanical vibrators, curing, finishing, etc. complete.
42 Providing and casting in-situ controlled cement concrete of M30 grade for approach slab with 89.100 Cu.Mt. 5413.60
20mm down coarse aggregate of the required size including formwork, placing in position,
consolidating with mechanical vibrators, curing, finishing, etc. complete.
43 Providing and casting in-situ controlled cement concrete of M30 grade for 100 mm thick wearing 65.000 Cu.Mt. 5556.01
coat laid as directed with 20mm down coarse aggregate of the required size including formwork,
placing in position, temping vibrating, curing, finishing and filling in joints with bitumen etc.
44 Providing PVC 100mm diameter water spouts including necessary grating as per drawings. 48.000 No. 159.37
45 Providing and fixing marble slab including engraving letters / numbers, painting complete. 6.000 No. 1012.65
Size 75cm x 60cm x 4cm
46 Floor Apron : Construction of flexible apron 300 mm thick comprising of loose stone boulders 192.870 Cu.Mt. 3003.74
weighing not less than 40 kg in Concrete M15 between Box & curtain wall.
47 Flexible Apron :Construction of Stone apron 300/750mm thick comprising of loose stone 758.540 Cu.Mt. 1092.52
boulders weighing not less than 40 kg beyond curtain wall.
48 Providing and laying filter media 150mm thick as directed underneath pitching in slopes as per 410.000 Sq.Mt. 318.15
technical specifications.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
49 Carry out complete alignment survey work by total station along bridge alignment, cross roads 1.000 Hect. 35000.00
100m. both sides, 200m. additional length from both ends of bridge including marking of centre
line of alignment, taking ground level details of existing structures, details of all manholes,
catchpits, pipeline, valves, light poles, trees, over head electrical lines, BSNL section pillar/box,
Torrent electrical boxes, PMT including number marked on them, road dividers, foot paths,
etc.within construction area and additional areas/lengths if required. Rateincludes fixing
necessary reference pillars, establishing bench mark, establish foundation layout on ground,
including submissionlongitudinal section, cross section and drawing report of survey work in
three hard colour copies with soft copy in CD to Engineer-in-charge as directed for flyover and
approaches. Submission of drawing in hard copy and soft copy as per specifications.
50 Carryout Geotech investigation work including drilling 150 mm dia bore holes in all sorts of soil, 120.000 Rmt. 4545.00
ordinary rock and hard rock, upto maximum depth as mentioned, collectig undisturbed samples
and conducting standard penetration tests alternate at an interval of 1.5 to 2.0 m depth,
conducting all necessary laboratory tests as per IRC provision, showing bore log locations, their
RL of GL, for all type of classification and determination of soil parameters, including submission
of report in three copies covering investigation data and recommendation for SBC & providing all
parameters as per IRC considering the design criteria, all as per specification , as and where
required and as per instruction of engineer in charge
1) The rate is inclusive of submitting soil investigation report in three sets in hard copy as well
soft copies duly signed by soil expert and contractor
2) The rate is inclusive of all materials with contractor's labour, tools and plants, machineries, as
3) The rate is inclusive of all taxes including GST / services tax as applicable. For up to 40Mt.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
51 Providing temporary barricade including all road safety devices on both sides of ROB and 100.000 Sq.Mt. 919.10
arrangement for traffic diversion such as traffic signals, traffic marshals during construction at
site, for day and night as per technical specifications and drawings. Temporary barricade shall be
of plain MS sheet 1.5mm thick fixed with steel frame as per drawing, painting (including primer
of approved quality) with synthetic enamel paint of approved color, quality and brand, writing
lettering and logo of AMC including maintenance of the same duly cleaning the same on
fortnightly basis and painting as required, arrangement for blinker lights on barricades during
night as per requirement and as per the instruction of the engineer. Barricading should be
rugged. During the construction, barricading has to be kept continuously. Nothing extra will be
paid for dismantling and re-erecting the barricades for other location of flyover and for the
purpose of road widening/diversion/resurfacing, utility identification/diversion etc.There
should not be any opening at the end of barricade except at locations approved by Engineer.
Note: (i) Barricades on either side shall be measured individually.
(ii) Once barricade has been provided and work started, removal of barricade will not be
permitted till completion of pile, pile cap, pier and pier caps, portal beams, segment erection, I
girder, erection, till completion of entire superstructure.
(iii) While erecting barricade, the bottom gap between barricade and road should be plugged
with cement concrete from inside, where required.
(iv) There should be minimum openings at the end of barricade to allow access of trucks / lorries
and machine to site work area. Even these spacing should have proper opening & closing
(v) For 2.0m barricades adequate blinking lights on barricade during night time must be ensured.
The cost of this item should include provision for power pack / Genset etc. so as to ensure the
blinking of lights in night time as long as barricades are in position at the work spot.
(vi) After completion of the entire work, the barricades shall be the property of the contractor.
52 (vii) If the cleaning
Dismantling is not done
the existing including
structure removal
including of posters
removing and regularly, a recovery
stacking the shallmaterials
dismantled be made as 15.000 Cu.Mt. 952.51
and where directed including all leads and lifts by Engineer in Charge - RCC work , Rubble/Brick
Masonry & Steel work.
RCC Work (RCC Structures including cleaning, straightening and cutting of bars and seperating
them out from RCC.)
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
53 Dismentaling the flexible pavement including removing and stacking the dismentalled materials 5.000 Cu.Mt. 347.80
as and where directed - Granular Course with all lead and lift.
54 Empty boring to the required depth (measured from bottom of pile cap to founding level) by 980.000 Rmt. 8889.63
means of hydraulic pilling rig through all strata like soil, sand, clay, murrum, gravel, pebble,
boulder, cobble, soft rock, etc. for pile of required diameter, including all required plant &
machineries, disposal of excavated material with all leads & lifts, mobilisation demobilisation,
remobilisation if required, transportation of required plant and machineries, etc. Method of
boring shall be as per IS 2911-Part 1 - Section -II.
Note : (1) Bore hole Drilling shall be done by use of hydraulic rig using temporary casing of
required thickness and depth upto cut off level of pile, and drilling shall be carried out as
directed by the Engineer. (Use of bentonite slurry will not be permitted)
(2) Reinforcement will be paid separately.
(3) Rate shall also include drilling and socketing in rock at required depth. This item is without
the cost of polymer to be used for stabilisation of bore i.e Dry Boring.
(4) Length of pile shall be measured from bottom of pile cap and upto the founding level.
(5) Rate is inclusive of empty boring through overburden (i.e. temporary working platform, etc.)
1500 mm dia. pile
55 Providing and installing 6 mm MS liner for bored-cast-in-situ concrete 1.5 m dia. piles including 66.000 M.T. 47323.73
applying protective coating as per drawing and specification and as directed by Engineer.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
56 Providing and placing reinforced cement concrete M35 grade with tremie pipe in RCC bored 1735.000 Cu.Mt. 5002.19
piles of any diameter using 6 mm to 20 mm machine crushed well graded stone aggregate,
natural or crushed sand of approved quality, OPC 53 grade cement with contractor's own
concrete mix design, including necessary mixing in fully automatic batch mix plant, transport,
curing, casting of pile min 1.0x dia above cut off level with all leads & lifts, etc. complete as per
execution drawing & specification & as directed by engineer In charge. Including mobilisation,
demobilisation, remobilisation, transportation of required plant and machineries if required.
1) Rate is Excluding the reinforcement, initial pile load test, routine load test and M.S. Liners,
pipe for Integrity pile test using cross hole sonic logging, but including temporary liners if
2) Rate is inclusive of labour charges for insert of pipe for Integrity pile test using cross hole
sonic logging method. 3) Payment
for concrete shall be done from Cut off level upto founding level and it should be only based on
theoritical dimension of Pile.
57 Chipping and dressing of the RCC piles upto cut off level including cleaning of reinforcement and 195.000 Cu.Mt. 952.51
removal of dismantled materials etc. for providing pile caps as directed by Engineer in charge
and as per specifications. [Chipping and dressing shall be carried out with using mechanical
1500 mm dia. pile
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
58A Earth work in Excavation for pile caps, foundation of columns, Trough, RCC Box, approach slab, 2110.000 Cu.Mt. 523.28
solid slab, pile cap beam, stair,retainig wall etc. in all categories of soils, such as sand, clay,
murrum, gravel, pebble, boulder, cobble, soft rock etc. as per specification for depth below
ground level as mention. The rate is inclusive of contractor's own machinery and equipment,
labour, taxes, temporary works, consumables. leading & lifting, shoring, strutting, timbering and
buttressing with sand / clay bags and all such measures necessary to retain in position the sides
of foundation pit and including refilling the approved excavated soil, clearing and carting excess
earth as directed within site limit. The rate is also inclusive of dewatering by manual or
mechanical means, if require.
Soils of all types including ordinary earth, sand dry/ wet soil, marine clay,boulders, kankars, soft
murrum, hard murrum etc.
(A) From 0.0 mt to 3.0 mt Depth
58B (B) From 3.0 mt to 6.0 mt Depth 870.000 Cu.Mt. 613.92
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
59 Carrying out Static load test as per standard procedure laid down in the IS 2911 specification and 1.000 No. 120588.00
maintaining complete records of load v/s settlement on test any load and any dia of pile
constructed for the purpose including erection and removal of loading platform with all
contractor's materials, labour, tools & plants, etc. complete with all necessary instrumentation,
high capacity hydraulic jacks, etc. complete as per specification and for the test load as directed
by Engineer-in-charge.
1) Load test shall be continued till test load or soil failure whichever is earlier
2) Testing shall be carried out with loading frame with ground anchors/anchor piles/kentledge
with platform including all necessary arrangement required for the test, as approved by Engineer-
3) Boring, concreting & reinforcement of test pile only shall be measured separately in
respective items subject to successful completion of test..
4) If load test of pile is not completed successfully, payment shall not be made for this test item
as well as boring, concreting and reinforcement of test pile for which test carried out and
another test pile shall be constructed.
No extra payment shall be given for ground anchors/anchor piles/kentledge with platform and
other nacessary arrangments.
5) Contractor will have to complete initial load test within 60 days from date of workorder. No.
extra time period will be given on this account.
Initial Pile Load Test on piles for 2.5 times the design load specified in drawings in Nosn working
areas in the vicinity of the bridge site by static method.Rate includes Anchor pile & Preperation
60 Providing and laying in positions machine mixed Plain Cement Concrete M15 grade for leveling 110.250 Cu.Mt. 3789.70
course below foundation or below pile cap, pile cap beam, solid slab, approach slab,stair etc. at
other places as directed by Engineer-in-charge with graded broken stone aggregate from 6 mm
to 40 mm including tamping, vibrating, leveling and curing complete with all formwork,
dewatering wherever required including all materials, labours, plants, machineries & tools, all
leads and lifts, etc. complete as per specification.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
61 Providing and casting in-situ Reinforced Cement Concrete M35 grade controlled cement 1212.750 Cu.Mt. 5212.26
concrete in pile cap , Trough wall, RCC Box, RCC Retaining walls, stair etc using 6 mm to 20 mm
machine crushed well graded stone aggregate, sand of approved quality, OPC 53 grade cement
with contractor's own concrete mix design etc. complete as per specification.
The rate is inclusive of all materials, including necessary dewatering, mixing in fully automatic
batch mix plant, transport, curing, vibrating, placing in position, shuttering, formworks,
deshuttering carefully, making good the damages, fixing embedment, inserts, pockets,
Thermocol as per drawing above utility etc all, wherever necessary, with all lead and lift with
contractor's labour, tools & plants, machineries, as required.
62 Providing and casting in-situ Reinforced Cement Concrete M35 grade controlled cement 225.000 Cu.Mt. 5561.20
concrete in pier, Abutments (pier and abutments shall be cast in single lift or as per direction of
Engineer in charge),stair etc. using 6 mm to 20 mm machine crushed well graded stone
aggregate, sand of approved quality, OPC 53 grade cement with contractor's own concrete mix
design etc. complete as per specification.
The rate is inclusive of all materials, including necessary mixing in fully automatic batch mix
plant, transport, curing, vibrating, placing in position, scaffolding, staging, shuttering,
formworks, deshuttering carefully, making good the damages, fixing embedment, inserts,
pockets, wherever necessary, with all lead and lift with contractor's labour, tools & plants,
machineries, as required, with including cost of finishing equivalent to F3 type exposed concrete
Note:- Any honeycombing/ undulation found shall be rectify to match F3 class finish. Rates in
items shall include cost of providing grooves, chamfers, moulding, cut-out etc. in formwork. The
work will include placing in position of necessary fixtures, sleeves for various purposes, etc.
complete as per drawings, specifications and as directed by the Engineer in charge.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
63 Providing and casting in-situ controlled cement concrete of M 35 grade in pier cap, abutment 305.000 Cu.Mt. 5641.25
cap ,pedestal, seismic arrester, RCC Dirt Wall, Side Wall etc. using 6 mm to 20 mm machine
crushed well graded stone aggregate, sand of approved quality, OPC 53 grade cement with
contractor's own concrete mix design etc. complete as per specification.
The rate is inclusive of all materials, including necessary mixing in fully automatic batch mix
plant, transport, curing, vibrating, placing in position, scaffolding, staging, shuttering,
formworks, deshuttering carefully, making good the damages, fixing embedment, inserts,
pockets, wherever necessary, with all lead and lift with contractor's labour, tools & plants,
machineries, as required, with including cost of finishing equivalent to F3 type exposed concrete
finish and form mark.
Any honeycombing/ undulation found shall be rectify to match F3 class finish. Note:- Rates in
items shall include cost of providing grooves, chamfers, moulding, cut-out etc. in formwork. The
work will include placing in position of necessary fixtures, sleeves for various purposes, etc.
complete as per drawings, specifications and as directed by the Engineer in charge.
64 Providing and applying Coal Tar Epoxy protective paint in two coats of DFT 210 microns for 840.000 Sq.Mt. 156.55
foundations / concerete surfaces in contact with soil complete as per specifications and as
directed by the Engineer including all leads and lifts etc. complete.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
65 Providing and fixing in position (Thermo Mechanically Treated Bars) TMT Fe550D-Fusion Bonded 704.000 M.T. 89705.59
Epoxy Coating (FBEC) conforming to IS 1786 reinforcing bars of various diameters for following
items as per detailed designs and drawings and schedule including cutting, bending, hooking the
bars, binding with 18 SWG GI wires with cost of all labour, materials, tools, plants, equipments,
supporting as required with all lifts and leads etc. all complete as per specification and as
directed by Engineer.
For Pile, Pile Cap , Box, Trough wall, Retaining wall, stair, Pier , Pier Cap, Abutment, Abutment
cap, Dirt wall, Seismic Arrestor and Pedestal, Retaining Wall stem, RCC work in Superstructure,
For Pile, Pile Cap , Box, Trough wall, Retaining wall, stair, Pier , Pier Cap, Abutment, Abutment
cap, Dirt wall, Seismic Arrestor and Pedestal, Retaining Wall stem, RCC work in Superstructure,
Approach Slab, Crash Barrier, Pylon, Kerb
The rate includes for supply, loading, unloading, transporting to site, cutting, bending, hooking,
placing, tying in position with contractor's own binding wire, welding, forming the cage and
lowering it in position in pile bore etc. Welding and supporting in position to ensure lines and
levels during concreting, maintaining proper cover / spacing, all leads & lifts, etc. including
contractor's own equipment, labour, supervisor, taxes, machineries, etc. complete as per
drawings and specification.
66 Providing and casting in-situ Controlled Reinforced Cement Concrete of Grade M35 for RCC 1145.000 Cu.Mt. 5686.74
Voided / RCC Solid Slab which are to be cast with staging and shuttering, as below using 6 mm
to 20 mm machine crushed well graded stone aggregate, sand of approved quality, OPC 53 grade
cement with contractor's own concrete mix design, staging design etc. complete as per
specification. The rate is inclusive of all materials, including necessary mixing in fully automatic
batch mix plant, transport, curing, vibrating, placing in position, staging, scaffolding, shuttering,
formworks, deshuttering carefully, making good the damages, fixing embedment, inserts,
pockets, wherever necessary, with all lead and lift with contractor's labour, tools & plants,
machineries, as required, with including cost of finishing equivalent to F3 type exposed concrete
67 Providing and laying Tar Paper below solid slab of approved and as directed by engineer in 237.000 Sq.Mt. 252.50
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
68 Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to 218.000 Rmt. 2127.06
line and grade, tolurence of vertical RCC post not to exceed 1 in 500, centre to centre spacing
between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for
expansion, complete as per approved drawings and technical specifications.
69 Providing and casting in-situ Reinforced Cement Concrete M35 grade controlled cement 45.000 Cu.Mt. 5492.56
concrete in Grade Slab for using 6 mm to 20 mm machine crushed well graded stone aggregate,
sand of approved quality, OPC 53 grade cement with contractor's own concrete mix design etc
F3 type exposed finish. complete as per specification. The rate is inclusive of all materials,
including necessary mixing in fully automatic batch mix plant, transport, curing, vibrating,
placing in position, shuttering, formworks, deshuttering carefully, making good the damages,
fixing embedment, inserts, pockets, wherever necessary, with all lead and lift with contractor's
labour, tools & plants, machineries, as required.
70 Asphaltic Plug joint (Providing and laying of asphaltic plug joint to provide for horizontal 132.000 Rmt. 1257.45
movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to
100 mm, width varying from 500 mm to 750 mm (in traffic direction), covered with a closure
plate of 200mm x 6mm of wieldable structural steel conforming to IS: 2062, asphaltic plug to
consist of polymer modified bitumen binder, carefully selected single size aggregate of 12.5 mm
nominal size and a heat resistant foam caulking/backer rod, all as per approved drawings and
specifications.)
71A Carting of excavated material such as murrum, earth, kapachi, gravel, brickbats, kankar, debris, 2841.000 Cu.Mt. 103.26
sand, dismantled material, including loading, unloading, stacking etc. complete at non
objectional place as directed by engineer in charge.
(a) Lead up to 5 Km.
71B (b) Additional rate for lead above 5 and upto 10 km 947.000 Cu.Mt. 150.63
71C (c )Additional rate for lead above 10 and upto 15 km 947.000 Cu.Mt. 192.55
72 Providing and laying Cement concrete wearing coat M-40 grade including reinforcement 120.000 Cu.Mt. 5713.70
complete as per drawing and Technical Specifications
73 Providing flood gauge marks on substructure as per designincluding painting complete. 15.000 Rmt. 171.00
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
74 Sand Filling 354.380 Cu.Mt. 516.43
Filling with Coarse sand upto 200 mm thick layer compacted, obtained from outside, including
watering, ramming well, consolidating, compacting and dressing etc. complete, as directed.
75 Bi-axial extruded high modulus polypropylene geogrid 380.000 Sq.Mt. 253.51
Supplying & laying of bi-axial extruded high modulus polypropylene geogrid conforming to
MORT&H specification for base/sub-base reinforcement having minimum tensile strength
30kN/m in the longitudinal and transverse direction, with 10.5kN/m and 21kN/m tensile
strength at 2% and 5% strain respectively in the longitudinal and transverse direction, junction
efficiency not less than 95% and with 38mm X 38mm mesh opening.
76 Providing and laying Stone Pitching on slopes on embankment behind retaining Wall complete 40.000 Cu.Mt. 1051.41
as per drawing and Technical specifications
77 Providing and laying - 150mm thick Filter media under stone pitching as per detailed 120.000 Cu.Mt. 877.69
specifications.
78 Providing and fixing in position Mild steel dowel bars in pier caps or abutments caps for 160.000 No. 399.70
anchorage in free end as per detailed drawing including cutting, bending and welding
complete.(16mm)
79 Shoring with 'Z' section MS sheet piles side by side in all kinds of soil mechanically or manually as 2097.000 Sq.Mt. 963.71
per approved drawing with contractor’s own arrangement complete in all respects and removal
of sheet piles after completion of the work as directed by engineer in-charge Note: Payment will
be made as per actual driven length of pile.
80 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts 120.000 Rmt. 6621.26
including setting andjoining the pipes in C.M. 1:2 watering and laying (To level ofslops of I.S.
/ 1971 Class NP4 casted by vertically vibratedtechnology of following internal diameter. 1200mm
81 Dewatering of natural or accumulated water from any location. Payment to be done for Horse 17280.000 Hp 87.54
power of pump multiplied by pumping hours. Hours
82 Providing and placing in position M-250 Controlled cement concrete for PCC work in protection 400.000 Cu.Mt. 4733.87
walls including form work, shuttering, mixing, placing, compaction, curing etc. complete in all
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
83 Providing and laying dry stone pitching of 230 mm thick on slopes with RCC Panel CC Beam of 630.000 Cu.Mt. 3486.52
230 x 230 in M200 Concrete including hand packing, filling joints as directed by engineer in
charge for all lead and lift.
84 Providing and laying ‐ Filter Media 150mm thick directed at the back of abutments, returns and 2700.000 Sq.Mt. 317.22
wing walls as per detailed specifications.
85 Excavation for foundations of Retaining wall in sand, gravel, clay, soft soils, soft soils, murrum, 4570.000 Cu.Mt. 733.62
hard murrum, boulders, very stiff or sticky clays, etc.. including shoring, strutting and dewatering
as necessary and depositing of the excavated stuff as directed for all lead, back filling the
excavated pit by approved excavated material etc. complete as per specification.
Depth upto 3.0 m below GL
86 Providing and filling rubbles including hand packing and filling interstices with quarry spalls 800.000 Cu.Mt. 1101.71
behind abutments and between returns as directed.
87 Providing and filling in foundation with ordinary cement concrete M15 grade and providing 160.000 Cu.Mt. 3789.70
necessary pin headeres including formwork, vibrating, ramming, compaction, leveling, curing,
88 Providing and casting in-situ controlled cement concrete of M35 grade for RCC work for footing 709.900 Cu.Mt. 5020.71
of Retaining wall with 20mm down coarse aggregate of the required size for any depth including
dewatering, scaffolding / centering, shuttering, mixing, placing in position, consolidating with
mechanical vibrators, curing, deshuttering carefully, making good the damages, fixing
embedment, inserts, pockets, wherever necessary as per specification and drawing.
89 Providing and casting in-situ controlled cement concrete of M35 grade for RCC Retaining wall 581.500 Cu.Mt. 5627.72
with 20mm down coarse aggregate of the required size including formwork, shuttering, placing
in position, consolidating with mechanical vibrators, curing, finishing, deshuttering carefully,
making good the damages, fixing embedment, inserts, pockets, wherever necessary as directed
and as per drawing with F3 type exposed concrete finish and form mark as directed by Engineer-
in-charge, etc. complete as per specification.
(a) Height from 0 to 5m
90 Providing and casting in-situ controlled cement concrete of M20 grade for RCC Kerb with 20mm 52.000 Cu.Mt. 4860.14
down coarse aggregate of the required size including formwork, placing in position,
consolidating with mechanical vibrators, curing, finishing, etc. complete.
Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount
No. specifications) Figure
91 Providing parapet of ordinary cement concrete M:20 as per detailed drawings with necessary 380.000 Rmt. 1198.54
reainforcement including, shuttering, laying vibrating and finishing to line and level complete.
Precast/Cast in situ.
I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned above. Amount of
my /our tender works out as under.
* Estimated Amount * Estimated Amount
put to tender put to tender
Deduct :…………% Below Add :………%Above
In Words …………………………………… In Words………………………………
* (Please strike out whichever is not applicable).
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C
Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption
have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.
Deputy Executive Engineer Executive Engineer
R & B Sub Division R & B Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ_Missing link_ Jamsar to Ranjitpar.pdf
GR TO BE ATTACHED part 1.pdf
GR TO BE ATTACHED part 2.pdf
PRE-Q DOCUMENT.pdf
SBD - Annexure - Missing link_ Jamsar to Ranjitpar.pdf
SBD VOLUME-1 Missing link_ Jamsar to Ranjitpar.pdf
SBD VOLUME-2.pdf
SBD VOLUME-3.pdf
SBD VOLUME-4.pdf
Test Schedule.pdf
E-Tender-16.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .