Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAdmitted-Finance BELOW SLAUGHTER HOUSE KRISHNA NAGER SHIMLA | SHIMLA | SHIMLA | HIMACHAL PRADESH | L1 | Admitted-Finance | |
| 2 | L2₹3.9 L+₹29,437.62 (8.24%)Admitted-Finance HIMACHAL PRADESH HP | L2 | Admitted-Finance | |
| 3 | L3₹4.3 L+₹72,856.12 (20.4%)Admitted-Finance R O SUJANPUR TEHSIL DISTT HAMRIPUR | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Sunil Kumar L1 | RAJE ENGINNERING WORKS L3 | ROHIT KUMAR L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in Foundation and trenches etc. (in pipes and piti) in all kinds of soils such as pick work, jumper work, blasting in soll/hard rock, chiselling/wedging out of rock where blasting prohibitedysaturated soil stacking the excavated earth within all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm layers when required ino plinth sides of foundation etc. consolidating each deposited layer hy ramming and watering and then disposting of all surplus excavated earth as directed within all leads and lifts including uprooting of trees dressing of beds, and sides and preparation of sub-grade, restoration of unmetalled metalled paved surfaces to its original condition including soring. strutting, tinsbering and dewatering where ever houses, fixing caution boards, crossing over trenches and to the entire satisfaction of the Engineer-in-charge. | 134.37 | cum | 350 ₹47,029.5 Lowest | 450 ₹60,466.5 | 400 ₹53,748 |
| 2.00 | Dismentalling of GMS pipe of 125 mm dia including cutting etc complete(earth work to be measured and paid for separately including testing of joints, within all leads and lifts as per the entire satisfaction of the Engineer-in-charge | 78 | Rmt | 185.88 ₹14,498.64 Lowest | 250 ₹19,500 | 200 ₹15,600 |
| 3.00 | Relaying, jointing and testing GMS pipe of 125mm diameter including fitting complete(earth work to be measured and paid for separately including testing of joints, within all leads and lifts as per the entire satisfaction of the Engineer-in-charge | 78 | Rmt | 185.88 ₹14,498.64 Lowest | 250 ₹19,500 | 200 ₹15,600 |
| 4.00Providing Circumferencial Butt welded joints by electrical arc welding to various mm dia GI pipe cutting and welding in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes conforming to IS 814-1991 at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer in charge. including bend | ||||||
| 5.00 | 125 mm dia | 22 | Nos | 1,081.1 ₹23,784.2 Lowest | 1,250 ₹27,500 | 1,200 ₹26,400 |
| 6.00 | 80mm dia | 6 | Nos | 687.9 ₹4,127.4 Lowest | 750 ₹4,500 | 700 ₹4,200 |
| 7.00 | Providing and fixing of suitable size copper PVC insulated flat power 3 core copper cable 10.00 mm Sq. conforming to BIS 1554 (part-I) -1988 of latest with appropriate size including all other accessories such as flexible pipe solder, nuts bolts, cable glands, etc. laid in pipes (carrying all three phases) complete in all leads and lifts to the entire satisfaction of Engineer-in-charge. | 150 | Rmt | 1,013 ₹1,51,950 Lowest | 1,150 ₹1,72,500 | 1,100 ₹1,65,000 |
| 8.00 | Providing and fixing 4 sq mm 2 core service wire IS 7098 (Part 1) 1988 armoured with upto Date Amendments as per engineer in charge inall leads and lifts | 150 | Rmt | 285 ₹42,750 Lowest | 350 ₹52,500 | 300 ₹45,000 |
| 9.00 | GI wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 3%) for 3%Sag, Wastage & Cross Lacing as per engineer in charge in all leads and lifts | 110 | Rmt | 90 ₹9,900 Lowest | 200 ₹22,000 | 100 ₹11,000 |
| 10.00 | Providing and fixing of double flanged cast steel Sluice Valve 80 mm dia of Leader/Kirloskar make capable With standing normal seat pressure as per BS-1414 / API : 600 of class ASA-150 with upto date ammendment with table- 17 flange nuts and bolts, gasket sheet not less than 3 mm thickness etc. complete in all respect in all leads and lifts. | 1 | Nos | 48,572 ₹48,572 Lowest | 51,500 ₹51,500 | 50,000 ₹50,000 |
Tender Value
₹3.5 L
EMD Value
₹6,990
Closing Date
17 Dec 2025, 11:00 amClosed
Executive Engineer
Jal Shakti Division Nadaun
Repair and Maintenance of Booster Stage P Well To Pump House
2025_HPIPH_122893_1
No. JSV-EE-NDN-CB-Tender/2025-26/-
Open Tender
Civil Works
Item Rate
180 days
Nadaun
Repair and Maintenance of Booster Stage P Well To Pump House
8 documents required · 8 mandatory
₹500
EE Nadaun
₹6,990
17 Jan 2026
8 Dec 2025
17 Dec 2025
8 Dec 2025
17 Dec 2025
8 Dec 2025
8 Dec 2025 - 17 Dec 2025
Amount
Excavation in Foundation and trenches etc. (in pipes and piti) in all kinds of soils such as pick work, jumper work, blasting in soll/hard rock, chiselling/wedging out of rock where blasting prohibitedysaturated soil stacking the excavated earth within all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm layers when required ino plinth sides of foundation etc. consolidating each deposited layer hy ramming and watering and then disposting of all surplus excavated earth as directed within all leads and lifts including uprooting of trees dressing of beds, and sides and preparation of sub-grade, restoration of unmetalled metalled paved surfaces to its original condition including soring. strutting, tinsbering and dewatering where ever houses, fixing caution boards, crossing over trenches and to the entire satisfaction of the Engineer-in-charge.
Dismentalling of GMS pipe of 125 mm dia including cutting etc complete(earth work to be measured and paid for separately including testing of joints, within all leads and lifts as per the entire satisfaction of the Engineer-in-charge
Relaying, jointing and testing GMS pipe of 125mm diameter including fitting complete(earth work to be measured and paid for separately including testing of joints, within all leads and lifts as per the entire satisfaction of the Engineer-in-charge
Providing Circumferencial Butt welded joints by electrical arc welding to various mm dia GI pipe cutting and welding in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes conforming to IS 814-1991 at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer in charge. including bend
125 mm dia
80mm dia
Providing and fixing of suitable size copper PVC insulated flat power 3 core copper cable 10.00 mm Sq. conforming to BIS 1554 (part-I) -1988 of latest with appropriate size including all other accessories such as flexible pipe solder, nuts bolts, cable glands, etc. laid in pipes (carrying all three phases) complete in all leads and lifts to the entire satisfaction of Engineer-in-charge.
Providing and fixing 4 sq mm 2 core service wire IS 7098 (Part 1) 1988 armoured with upto Date Amendments as per engineer in charge inall leads and lifts
GI wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 3%) for 3%Sag, Wastage & Cross Lacing as per engineer in charge in all leads and lifts
Providing and fixing of double flanged cast steel Sluice Valve 80 mm dia of Leader/Kirloskar make capable With standing normal seat pressure as per BS-1414 / API : 600 of class ASA-150 with upto date ammendment with table- 17 flange nuts and bolts, gasket sheet not less than 3 mm thickness etc. complete in all respect in all leads and lifts.
ROHIT KUMAR (BID ID -594864)
RAJE ENGINNERING WORKS (BID ID -594954)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.46 MB
form6.pdf
Tender Documents • 0.33 MB
form8.pdf
Tender Documents • 1.46 MB
terms.pdf
Tender Documents • 0.06 MB
BOQ_180438.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .