SPECIAL REPAIR TO BUILDING NO-17 AT AF AGE (I) BHOWALI

Amount

Demolition of unreinforced concrete in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing rubbish to out side MOD land complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L non skid ceramic coloured tiles 7-8mm thick (Square/rectangular) area of each tiles exceeding 0.18 sqm but n exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

S&F Glazed ceramic coloured tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified and directed.

M & L for screed bed or bedding layer of mortar15 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting, complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for providing 16-18mm thick Z- black granite stone slab including sandwich type (IInd layer of 20mm at front) (table rubbed and polished) bull nosed as on shelves / cooking / steps / plateform / pillars over screed bed 20mm thick in CM 1:3 set jointed in neat cement slurry and pointed in white / coloured cement to match the shade complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

Taking down cement or cement lime plaster of any description including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and directed.

M&L Rendering 15mm thick on surface other than fair faces of brick work or concrete surfaces or on stone masonry surfaces or on one side of lathing in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished smooth and even in ceiling without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying 2 coats of oil bound distemper emulsion including a coat of alkali resistant primer over 3mm thick wall care putty, complete all as specified and directed.

Complete removal of existing treatment on surface of wall and applying 2 coats of oil bound distamper emulsion including a coat of alkali resistant primer over 3 mm thick wall care putty, complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered surfaces of ceilings and applying two coats of white wash complete all as specified and directed.

Taking up or down 15 mm bore steel steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer - in - Charge.

Taking up or down 20 mm bore steel steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer - in - Charge.

S &F 16 mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F 20 mm bore 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.

S & F in repairs CP brass Soap dish, fixed to walls with chromium plated (CP) brass screws complete all as specified and driected. (Make : Cera, Cat No : F5006106) or equivalent as approved by GE/AGE (I).

S&F in repairs 15 mm CP brass angle cock with wall flange, screwed for Iron Pipe or for brass ferrule complete all as specified and as directed. (Make : Cera, Cat No : F2008201) or equivalent as approved by GE/AGE(I).

S&F in repair 15mm bore brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in repairs 15mm Bib Tap long nose with wall flange, chromium plated fancy type long shank screwed for Iron Pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repairs Brass chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.

S&F PVC connections 15mm dia , 450mm long, , with PTMT nuts & washers at both ends complete all as specified.

S&F in repairs Brass Chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges,complete all as specified and directed.

S&F in repair Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including PVC waste pipe of 32 mm dia with including 32 mm dia brass chromium plated fittings. complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including connection to drain or out going pipe and to flushing pipe including Plastic water closet seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as directed.

S&F in repair PVC flushing cistern 10 ltrs capacity valve less symphonic action type low level complete with inlet valve handles incl brackets, chromium plate brass flush pipe 32 mm dia PVC connection and incl taking down old high level cistern comp all as spd.

S&F in repairs health faucet ABS body with wall hook and 1 mtr SS braided rubber hose pipe complete all as specified.(Make : Cera, Cat No : F8030301) or equivalent as approved by GE/AGE (I).

S&F in repairs 15 mm bore brass, chromiun plated, wall mixer (3 - in - 1) with arrangement for both telephonic shower and overhead shower with bend pipe, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe.(Make : Cera, Cat No : F2008403) or equivalent as approved by GE/AGE (I).

S&F in repairs 15 mm bore brass, chromiun plated, sink mixer(wall mounted with 170 mm long swivel spout and wall flange, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe.(Make : Cera, Cat No : F2008501) or equivalent as approved by GE/AGE (I).

M&L for 75mm dia PVC (SWR) floor trap, with grating including jointing with solvent cement, complete all as directed and specified.

S & F for 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) vent cowls.

S&F for 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S & F for 110 mm bore PVC (SWR) bends of any radius with access door fittings complete all as specified and directed.

S& F for 110 mm PVC (SWR) vent cowls complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete with CP waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge.

S & F stainless steel plate rack made out of 1mm thick steel sheet of size 75cm x 90cm x 25cm (minimum weight 3.5 Kg) with fixing arrangement complete as per sample kept in GE`s Office suitable for officers quarters complete all as specified and as directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

M&L for plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints of IInd class hardwood complete all as specified.

M&L for 40 mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F of 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S & F of 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

S & F of 150mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheetreinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid PVC Door shutters 30 mm thick (styles) consisting of frame made out of MS tube for top and bottom rails, mild steel frame shall be covered with plain colour PVC 'C' channel having a PVC Sheet strip of 20mm with stuck inside with solvent cement for stiles and wood grain printed PVC Sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitabledecorative PVC sheet beading of 10mmx10mm , and joined together with solvent cement at site as per specification and drawing complete all as specified & directed.

S&F 100 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and directed.

S&F in repair 25 mm dia Stainless steel curtain rod with fixing brackets , stops , side fancy rollers set as slected by GE complete all as specified and directed.

M&L Pre-cast cement concrete solid building block or slab Type C-1 (1:3:6) with using 20 mm graded aggregate 10 cm thick (with plain or interlocking joint as directed) and setting in cement mortar 1:4 ,complete all as specified and directed.

Demolition of reinforced cement concrete of any discription and any position (ground to 4th floors) and removing the rubbish from the work site out side defence premises complete all as specified.

M&L for RCC M-15, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

S & F Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slab and hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. and flat fair finished surfaces, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws all complete all as specified and directed.

S&F Providing Kitchen/cupboard cabinet with shutter complete in required sizes made out of 18 mm thick one side decorative lamination & other side white balancing lamination sheet consisting of carcass 18 mm thick PVC sheet & provision of shutters and panels made out of 18 mm thick one side decorative laminated PVC sheet all brackets 5.5 mm screws etc. All the edges shall be covered with 2 mm thick PVC edge bonding tape of 90 degree edge bend finish as per make and specification mentioned as per drawing and specification approved by Engineer-in-Charge including stainless steel L hinges of suitable size, fixtures & fittings required complete all as specified.

All same as per Sl No. 66 here-in-above, but both sides white lamination.

S&F stainless steel L hinges.

S&F stainless steel handles 100 mm long fabricated type, bright polished decorative type fixed with brass screws.

S&F magnetic catcher.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories Area not exceeding 2.00 sqm each (Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

S&F of 5.0 mm thick sheet glass ,ordinary quality and size exc 0.50 Sqm and fixed to door/window shutter and partition wall by means of glazing clips rubber strips etc.

Demolition of brickwork/stone boulders, masonary built in cement mortar incl all quoins, arches,pillars,etc. but excl ashlar facings, dressed stone works & precast concrete surfaces.

M&L brick work with sub class 'B' bricks old size best quality bricks straight or curved on plan exc 6 M mean radius built in CM (1:4) all as specified and directed.

M & L Cement concrete type B1 (1:2:4) (20 mm graded aggregate) in surface channels and drains etc complete.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces etc complete as in sunken portion etc complete as specified and directed.

M & L cement concrete type E2, 1:5:10 (20mm graded stone aggregate) as in filling and mass aggregate complete as specified and directed.

M&L for polythene film black 50micron thick, laid on a coat of bitumen primer @ 0.3-0.5 Kg/Sqm.

M&L 32 mm tubes medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floors as in spouts.

Dismantling of Cast iron pipes 100 mm bore including all fittings like bend,branch pieces, connectors, heel rest bend etc fixed to wall and removing from site all as specified and directed Note :- Work will be carried out upto 3rd storey of bldgs also as per direction of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account.

Dismantling of Cast iron pipes 75 mm bore including all fittings like bend,branch pieces, connectors, heel rest bend etc. fixed to wall and removing from site all as specified and directed Note :- Work will be carried out upto 3rd storey of bldgs also as per direction of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account.

Supply and fixing of cast iron (spun) soil,waste and vent pipe 100 mm bore, any length with or without ear with cement joint,fixed to walls.

Supply and fixing of cast iron (spun) soil,waste and vent pipe 75 mm bore, any length with or without ear with cement joint,fixed to walls.

S & F Bends of bore 100 mm (any radius),diminishing pieces or tapers (larger bore measured)

S & F Bends of bore 75 mm (any radius),diminishing pieces or tapers (larger bore measured)

Supply and fixing of CI Tee or single branch piece 100 mm bore with oval access door.

Supply and fixing of CI Tee or single branch piece 75 mm bore with oval access door.

S & F in repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays of dia 100 mm, including bolts and nuts and securing ends of stays to wall or roof

S & F in repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays of dia 75 mm, including bolts and nuts and securing ends of stays to wall or roof

S&F chequered cement concrete tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slury in floors with grey cement and pigment including screed bed 15mm thick in cement mortar 1:6 and pigment complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded crushed stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

S &F for 3 mm thick and 38 mm wide glass dividing strips fixed as in floor etc complete all as specified & directed.

Rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 3rd storey with necessary scaffolding) complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of old surfaces of wall by brooming down with wire brush and applying two coat of cement base paint white or tinted all as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of cement base paint on walls all as specified and direcrted.

Taking down carefully aluminium/copper point wiring (light point, fan point, socket outlet point or power point) any type (batten, casing N-caping, surface conduit or concealed conduit) complete with and including fittings and fixtures such as switches, ceiling rose, pendent, lamp holder, regulator, switch, socket outlet, shade conical etc and making good disturbed surfaces of walls etc as per existing finishes by plastering, repairs and distemper / white wash / colur wash etc. complete all as specified and directed.

M&L for point wiring complete with FRLS multi- stranded copper conductor 2 x 1.5 Sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming to IS-694 and in conduit system of wiring, drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings/ fixing accessories on wall and on existing conduit of ceiling and including modular, metal flush box of required module including cover frame and plate for mounting / fixing of modular switch/socket/ fan regulator as required and including single core stranded conductor copper 1.5 Sqmm size PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit and making good disturbed surface complete all as specified and as directed for the following :- Make of cable : Finolex, L&T, RR Kable Note: Cost of cutting/ chasing for conduits and making good disturbed surface deemed to be included in unit rate.

All as per Item No. 97.00 here-in-before one 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq. mm size complete all as specified .

All as per Item No. 97.00 hereinbefore but wiring for one 3 pin 5 amps switch socket outlet point on independent board complete all as specified .

All as per Item No. 97.00 hereinbefore but wiring for one bell/buzzer point controlled by bell push complete all as specified .

All as per item No. 97 above but with 2.5 Sqmm (nominal area) PVC insulated unsheathed multistranded 1100 volt grade copper conductor cable for 5 pin 15 Amp switch socket outlet including provision of single core stranded conductor copper 2.5 Sqmm size PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly.

S&F of modular type switch 6/10 Amp (ISI Marked), one way, 1 modules complete all as specified and directed.

S&F of modular type switch 16/20 Amp (ISI Marked), one way, 1 modules complete all as specified and directed.

S&F of modular type switch 6/10 Amp (ISI Marked), one way, 1 modules bell push complete all as specified and directed.

S&F of modular type socket outlet 6/10 Amp (ISI Marked), 2 /3 Pin combined, 2 Modules with shuttered complete all as specified and directed.

S&F of modular type socket outlet 16/20 Amp (ISI Marked), 6 pin for both rating (Total 6 pins), 2 modules with shuttered complete all as specified and directed.

S&F of modular type fan 0-5 step regulator, 100W - 2 module (ISI Marked) complete all as specified and directed.

S&F of modular White cover plate with frame, 2 module (ISI Marked) suitable for modular switches complete all as specified and directed.

S&F of modular White cover plate with frame, 3 module (ISI Marked)suitable for modular switches complete all as specified and directed.

S&F of modular White cover plate with frame, 4 module (ISI Marked) suitable for modular switches complete all as specified and directed.

S&F of modular White cover plate with frame, 6 module (ISI Marked) suitable for modular switches complete all as specified and directed.

S&F of modular White cover plate with frame, 8 module (ISI Marked) suitable for modular switches complete all as specified and directed.

S&F of modular White cover plate with frame, 12 module (ISI Marked) suitable for modular switches complete all as specified and directed.

S&F of modular metal flush box 1/2 module (ISI Marked) complete all as specified and directed.

S&F of modular metal flush box 3 module (ISI Marked) complete all as specified and directed.

S&F of modular metal flush box 4 module (ISI Marked) complete all as specified and directed.

S&F of modular metal flush box 6 module (ISI Marked) complete all as specified and directed.

S&F of modular metal flush box 8 module (ISI Marked) complete all as specified and directed.

S&F of modular metal flush box 12 module (ISI Marked) complete all as specified and directed.

S&F ceiling rose, surface bakelite,65 x 50mm, three terminals all as specified and directed.

Supply and fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittingscomplete all as specified and directed.

S&F in replacement of submain wiring with two run of single core PVC insulated unsheathed multi stranded copper conductor FRLS cable of size 6 Sqmm 1100 Volts grade and one run of PVC insulated unsheathed stranded copper conductor FRLS cable of size 6 Sqmm 1100 Volts grade as earth continuity conductor drawn through in and including rigid non metallec PVC conduit of size 25mm dia concealed including cutting,chasing & grouting for conduits and making good the disturbed surfaces of wall etc including complete all as directed.

Supply and Fix flush mounting factory made Ekinoxe SPN DB's Double door , IP-43 Protection, IK-09 with metal door, with neutral bar, Earth bar and cables ties for cable management fully insulated bus bar 8 way with 200 Amps rated bus bar complete all as specified and directed.

S&F MCB SPN (single pole and Neutral), 240 volts, 63 Amps breaking capacity 10 KA, ‘C’ Series. etc , complete all as specified and directed.

S&F MCB SP (single pole ) 240 volts, 5 - 40 Amps, 50HZ, 10 KA. , ‘C’ series complete all as specified and directed.

S&F in replacement of premium LED batten fitting 1 X 20 Watt, 6000 K, 4 ft complete with 'Eye Soft' technology and diffuser with exturded ploycarbonate environment friendly, energy efficient complete with all light fitting connection with 2 core flexible cable 23/0.00076 from ceiling rose to tube fitting connection, complete all as specified and directed.

S&F replacement of LED mini mirror fitting 1 X 10 Watt, 6000 K, 2 ft complete with ultra ceiling square profile linear LED light fitting fixture with exturded ploycarbonate environment friendly, energy efficient complete with all light fitting connection with 2 core flexible cable 23/0.00076 from ceiling rose to tube fitting connection, complete all as specified and directed.

S&F modular type blanking plate, 240 Volts, AC (ISI Marked) one module etc complete all as specified and directed.

S&F replacement of LED building security light fitting 1 X 30 Watt complete with tuff net glass IP:66 with provn of suitable GI bracket made out of suitable size of light grade pipe upto 1.2 mtr length bent to shape fixed with wall, MS clamps 02 Nos suitable for security light fitting to wall/coloumn and electric connection to the light fitting copper conducter of size 1.5 sqmm twin core as per site requirement complete all as specified and directed.

Taking down carefully ceiling fan/ exhaust fan by disconnecting all electrical connection, unscrewing from the position, stacking carefully for at site reuse of servicable fans or dismantling blades and removing fan and blade to E/M Store yard all as directed and specified.

Taking down carefully Electric Gyser by disconnecting all electrical connection & water connection, unscrewing from the position, stacking carefully at site for reuse of servicable gyser or removing the unservicable gyser to E/M Store yard all as directed and specified.

Taking down carefully Energy meters by disconnecting all electrical connection, unscrewing from the position, stacking carefully at site for reuse of servicable energy meter or removing the unservicable energy meter to E/M Store yard all as directed and specified.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose/ connector to fan with copper conducter of size 1.5 sqmm twin core as per site requirement complete all as specified and directed. (Note: Ceiling fan shall be used as retireved under item No.130)

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/ connector to fan with copper conducter of size 1.5 sqmm twin core as per site requirement complete all as specified and directed. (Note:Exhaust fan shall be used as retireved under item No.130)

Fixing only electric storage water heater complete all as specified and directed. (Note: Gyser shall be used as retireved under item No.131)

Fixing only Electric energy KWH meter single phase complete all as specified and directed. (Note: Gyser shall be used as retireved under item No.132)

Jain construction co