Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.4 LAccepted-Finance | L1 | Accepted-Finance Admitted Found Reasonable for Acceptance | |
| 2 | L2₹13.8 L+₹40,207 (3.01%)Accepted-Finance CHEMBISSERY PUTHIYAKAVU TRIPUNITHURA P O KOCHI 682301 | ERNAKULAM | KERALA | 682301 | L2 | Accepted-Finance Rejected L1 being accepted | |
| 3 | L3₹14.0 L+₹68,830 (5.15%)Accepted-Finance | L3 | Accepted-Finance Rejected L1 being accepted | |
| 4 | L4₹14.6 L+₹1.3 L (9.46%)Accepted-Finance MAGHAM RAMAPURAM LANE MUKKOLA P O TRIVANDRUM 695 044 | TRIVANDRUM | THIRUVANANTHAPURAM | KERALA | 695044 | L4 | Accepted-Finance Rejected L1 being accepted | |
| 5 | L5₹14.7 L+₹1.3 L (10.1%)Accepted-Finance PADMANABAPURAM VATTIYOORKAVU PO THIRUVANANTHAPURAM 695013 | THIRUVANANTHAPURAM | THIRUVANANTHAPURAM | KERALA | 695013 | L5 | Accepted-Finance Rejected L1 being accepted |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
9 Feb 2021, 6:00 pmClosed
GE Army Trivandrum
Office of Garrison Engineer Army, Thirumala Post, Trivandrum-06
As per tender documents
2021_MES_412194_1
GE (ARMY) TVM 9367/E8
Open Tender
Civil Works
Item Rate
180 days
Trivandrum
As per NIT
8 documents required · 8 mandatory
₹500
GE Army Trivandrum
₹30,000
Yes
27 Feb 2021
13 Jan 2021
11 Feb 2021
14 Jan 2021
9 Feb 2021
27 Jan 2021
14 Jan 2021 - 25 Jan 2021
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.
M&L screed bed or bedding layer of mortar 20 mm thick in cm 1:6 for laying floor finishes all as specified and as directed.
M&L rendering in cement mortar 10 mm thick for skirting / dado in cm1:,6 all as specified and directed.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/Rectangular ) area of each tiles exceeding 0.11 Sqm but not exceedng 0.18 sqm, as in floors etc, set and jointed neat cement slurry and pointed with coloured cement to match all as specified and directed.
M&L for glazed ceremic coloured tiles of size 450x300x7mm thick non skid joint free tiles as in skirting/dados set and jointed in neat cement slurry and pointed with coloured cement to match all as specified and directed.
M&L vitrified ceramic tiles of any shade, 8 to 10 mm thick ( Square / rectangular ) polished area of each tiles not exc 0.36 sqm as in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.
M&L Vitrified Ceramic tiles 8 to10mm thick (square/rectangular) polished, any shade, area of each tile n. exc 0.36 sqm as in skirting/Dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specfied and as directed .
Taking down chowkats with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each all as specified and directed.
S&F Solid PVC Door Frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing given in SSR Pt-II 2010 Pg No 182
S&F Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & drawing given in SSR Pt-II 2010 Pg No 183
S&F 100 mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised , type C21complete all as specified and directed.
S&F Aluminum anodised, barrel tower bolts of extruded section and fixed of 150mm long all as specified and directed.
S&F 150mm long aluminum handles cast type anodised all as specified and directed.
S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed.
M&L sheet glass ordinary quality 3 mm thick and glazing with oil putty or wooden beads n.exc 0.50 sqm in each pane all as specified and directed.
S&F figured glass pin headed type 3 mm thick and glazing with oil putty n.exc 0.50 sqm in each pane all as specified and directed.
S&F in repair Bib tap cast copper alloy fancy type CP 15mm bore of pipe with crutch or butterfly handle screwed down screwed for iron pipe or ferrule and fixed all as specified and directed. Make: JAQUAR or equivalent as approved by Engineer in Charge.
S&F in repair PVC connection 15mm dia 450mm long with 02 Nos brass check nuts with washer etc complete all as specified and directed.
S&F in repairs waste fittings brass chromium plated 32 mm/40mm dia for wash hand basin, glazed ware sinks etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified.
S&F in repairs viterous china wash basin, white flat back size 550mm x 400 mm including brackets with waste pipe including cutting for and pinning in ends of brackets or erecting stand with grating fixing to floor making good, fancy type complete all as specified and directed.
S & F in repairs chromium plated brass shower roses 125 mm size with or without swivel joints including fixing to steel pipe or union. all as specified Make: JAGUAR or equivalent as approved by GE
Supply only in repair of PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle incl brackets capacity 10 ltrs and connection to pipe complete fancy type all as specified and directed.
S & F in repair Pillar taps 15mm dia bore cast copper alloy with capstion heads, chromium plated , fancy type screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed all as specified . Make: JAGUAR or equivalent as approved by GE
S & F in repairs Stop valve cast copper alloy,screwed down, high pressure fancy type chromium plated with crutch or butterfly handle screwed both ends for 15mm dia bore iron pipe or for unions and fixed.Make: Make: JAGUAR or equivalent as approved by GE
S & F in repairs Stop valve cast copper alloy,screwed down, high pressure fancy type chromium plated with long shank and cup (concealed type) screwed both ends for 15mm dia bore iron pipe or for unions and fixed, all as specified. Make: JAGUAR or equivalent as approved by GE.
S&F in repair grating 125 mm dia with waste hole PTMT all as specified and directed.
S& Fixed in repairs vitreous china squatting pan , 'orissa' pattern, size 580 X 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including connection to trap, and to flushing pipe ,antisyphonage pipe, etc. complete includig making good to floor all as specified and directed. Make: JAGUAR or equivalent as approved by GE.
Demolition of block/brick work/stone masonry built in cement mortar and removing the debris/rubbish to a distance n.exc 100m as directed by Engineer-in-Charge.
M&L Pre-Cast Cement Concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exc 10 cm in width and setting in CM 1:4 all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar 1:6 on fair faces of concrete surfaces finished fair and smooth in patches without using extra cement all as specified and directed.
M&L for Preparation of new surfaces of wall, and applying three coats of white wash all as specified and directed.
S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls all as specified (upto four storey building) including necessary scaffolding and including bends and branch pipes 110 mm dia of Pipe all as specified and directed
All as per item No 34 above , but 75mm dia.
S&F in repairs toilet paper holder of brass fancy type chromium plated fixed to walls with CP brass screws complete all as specified and directed.
S&F in repairs fancy type plastic cabinets ivory colour fixing to walls complete of size 300 mm x450x 100 mm fixed to walls complete all as specified and directed.
S&F fixed in repair brass towel rail 20 mm dia, D type 60 cm long of stainless steel all as specified and directed.
S&F fixed in repair brass CP towell rack 24" Premium all as specified and directed.
M&L in repair for 19-20 mm thick granite slab in any size in black colour, machine cut, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone slab including cutting and polishing with 15 mm thick screed bed in cm 1:4 including demolition existing finish / slab complete all as specified.
S&F in repair Vitreous China urinals of size 465x 355x 265 half stall pattern (back or corner wall type), complete including providing and fixing plugs,bedding urinal against wall in cement mortor 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. including connection to flushing pipe and out going pipes all as specified and directed.Make: JAGUAR or equivalent as approved by GE.
Taking down shutter of any description exc. 1.00 sqm but n.exc 2 sqm each and resecuring in door opening after easing and adjusting all as specified and directed.
S& F in repair Vitreous China coloured wall mounted Stainzfree wash down water closet including Flushing Systmem as in sketch P-1 & all fittings complete. Make: JAGUAR or equivalent as approved by GE
S& F in repair Vitreous China coloured Stainzfree wash basin of size 600x 450 fancy type with openable cabinet below as Skeptch P-2 including PVC cabinet of size 600x450x100 above wash basin with specification same as given in item No 37 above & all fittings complete. Make: JAGUAR or equivalent as approved by GE
S&F in repairs brass CP telephonic shower including flexible pipe 1.5m premium all as specified. Make: JAGUAR or equivalent as approved by Engineer in Charge.
S&F in repair Health faucet with push bottom, flexible pipe with steel lining of 1 mtr long PVC chromium plated suitable for 15mm pipe.Make: JAQUAR or equivalent as approved by GE
M & L in repair 75mm PVC (SWR) floor trap with grating including jointing with solvent cement all as specified and directed
S&F in repair brass CP mixer for mixing hot and cold water screwed down for iron pipe 15mm dia. Make: JAGUAR or equivalent as approved by GE.
Supply and fix in repairs corner glass fancy type with stainless steel frame (200 mm x 200 mm)chromium plated screwed down for fixing to walls with screws all as specified.
Supply and fix in repairs glass shelf of size 300mm x 150 mm with stainless steel frame fancy type chromium plated screwed down for fixing to walls as approved by Engineer in Charge.
Supply and fix in repairs stainless steel towel ring made out 20 mm dia of 150mm Square/round in shape all as specified and directed
S&F in repair brass CP Soap dish all as specified and directed
S&F UPVC pipes of pressure rating 10kgf/cm2 fixed to walls complete or laid in floors 15mm bore incl taking down existing pipes all as specified and as directed including taking down all as specified and directed
All as per item No 53 here-in-before , but for 20mm dia.
Supply and fix in repair PVC ventiltor fixed type with solid frame of size 45mmx70mm including louvers frosted glass of size 3mm thick including MS guard bar of 10mm dia spacing 150C/C and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with PVC beading including painting to steel surfaces and taking down the existing ventilator all as specified and directed.
M/s.Rejoy Constructions
KENZ CONSTRUCTIONS
B.LAMBODHARAN
KEERTHI CONSTRUCTIONS
AKASH CONSTRUCTIONS
M/S Vadakkeparambil Electro-Mechanic Service
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .