Siddhiasram ONGC TSR Complex

Amount

(Supply & Erection)

TRANSFORMER BASE (6 Legs) : Earth work in excavation by mecanical means (Hydraulic excavator)/manual means in foundation trenches or drains ( nost exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50 m. All kinds of soil

Filling available excavated earth ( excluding rock) in trenches, plinth , sides of foundations etc. in layers nost excceding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m. (All kinds of soil)

Supplying and filing in plinth, under floor, foundations etc. with sand ( fine) from quarry with all lifts including spreading in horizontal layers , watering grading to required slope, ramming ,consolidating and compacting each layer by using plate compactor or by any suitable method complete

Providing and layaing in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level: 1:4:8 ( 1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nosminal size

Reinforcement for RCC work including straightening, cutting , bending , placing in position and binding all complete upto floor five level. i)Mild steel and Medium/Tensile steel bars

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement. :All work upto plinth level (a) 1:1 ½:3 ( 1 cement : 1 ½ fine sand : 3graded stone aggregate 20 mm nosminal size )

Reinforced cement concrete work in walls ( any thickness), including attached pilasters , buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering , finishing and reinforcement. In plinth and skirting courses, fillets, column, pillars, posts and struts, 1:1½:3 ( 1 cement : 1 ½ fine sand : 3graded stone aggregate 20 mm nosminal size )

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15* landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding cost of centring, shuttering , finishing and reinforcement & RCC work in beams , lintels, bands plain window sills, staircases and spiral staircases excluding precast spiral staircase,1:1½:3 ( 1 cement : 1 ½ fine sand : 3graded stone aggregate 20 mm nosminal size ) nosminal size

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15* landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding cost of centring, shuttering , finishing and reinforcement & RCC work in suspended floors, roofs having slope upto 15* landings, balconies, shelves and chajjas. (a) 1:1 ½ : 3 (1 cement : 1 ½ fine sand : 3 graded stone aggregate 20 mm nosminal size)

Centering shuttering including struttings, propping etc. and removal of form work for: Foundations, footing bases for columns

Centering shuttering including struttings, propping etc. and removal of form work for: Columns , piers, Abutments, posts struts

Lintels, beams, plinth beams,girders, bressumers and cantilevers with shuttering ply

Suspending floors, roofs landings balconies and access platform with 12mm thick shuttering ply

First calss brick work in foundation and plinth including cost of all materials as required complete:- In cement morter 1:4( 1 cement ;4 fine sand)

12mm cement plaster of mix.(a)cement mortor 1:4 ( 1 cement: 4 fine sand)

Neat cement punning.

Providing structural Steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required:-

Providing and fixing with hard drawn steel wire fabric 75x25mm mesh of weight nost less than 7.75kg per sqm to window frames etc. including 62x16 mm beading of Gamair wood

Providing and fixing ISI marked oxidised MS sliding door bolts with nuts and screws etc. Complete: 300x16mm

Painting with synthetic enamel paint having VOC ( Volatile Organic Compound ) content less than 150 grams/litre of approved brand and manufacture, including applying additional coats wherever reqd to achieve even shade and colour. [Payment shall be made after submission of Test certificate issued by the manufacturer] i) two coats

Finishing walls with water proofing cement paint of required shade of approved brand and manufacture on new work (two or more coats applied @ 3.84 kg/10 sqm) complete. [Payment shall be made after submission of Test certificate issued by the manufacturer]

Erection of 9 mtrs length of Steel Tubular POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp,Nuts & Bolts etc. as required. and making complete in all respect

Erection of M.S.Channel Cross-Arm 2.8 mtr . Long 75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm 2.2 mtr . Long 75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of 11 KV Single Disc insulator set along with necessary fittings

Erection of 11 KV Pin insulator along with Pin.

Erection of 11 KV 200 Amp. GOS unit set of three nos. including necessary connection complete asper technical specification.(Excluding the cost of back clamp.Nuts & Bolts)

Erection of 11 KV DOF unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp.Nuts & Bolts)

Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification

Installation/Positioning of 11/0.440KV, 3-Phase 315 KVA of Distribution Transformer on RCC base with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Earthing with G. I pipe 2.5mtr Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (including supply of G.l.Pipe, Salt & Charcoal, Gi wire, nuts &bolts, etc. as required)

Supply of 120 sqmm, 3-core, 11/6.35 KV, XLPE power cable,

Supply of 3 Phase, 3-core, 120 Sq.mm. Out Door Type End Termination Kits for 11KV XLPE insulated, insulation screened Aluminium Conductor Power Cable

Supply of nosn-flame propagating type 110 mm dia HDPE Pipe, wall thickness: minimum 7.4mm, maximum- 8.2mm (medium class) as per PE-100 Grade, PN-8 (SDR17) of standard make suitable for laying 3-core XLPE insulated power cable and shall be ISI marked and complying to technical requirement of IS; 4984/Is; 14333.

Supply of fabricated Copper Strip for LT Connection(320X50x8mm)

Supply of 1/2 " dia Polythine Pipe

Supply of Wooden Plank (24"X10'X1.5"size)

Supply of MS Nuts & Bolts (Assorted Size)

Supply of febricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primer coating

Supply of febricated stay clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primer coating

HDD digging/ drilling horizontally or diagonali direction for road crossing/ Water supply line/ Telecommunication line/ Gas pipe line etc. including laying of 64 to 200mm dia GI pipe direct into the earth at a depth of minimum 1100mm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of engineering in charge.

Fitting , fixing of all sizes dia HDPE/GI pipe ( Horizontally or vertically) on Wall or Poles for riser to pole/Feeder pillar/Service etc. including supply of necessary wall mounting Clamp/Poles clamp with proper clamping as per Engineering requirement inccoiling of execss cable at pole top.

Supply & erection of T- shaped pillar for cable line ID MARKING engarved with caption " POWER CABLE LINE" ( made of pre-cast RCC) of size ( pillar- 3 ftx.33ftx.33ft) and (T-Section -3ftx.33ft.) by excavating earth including required painting of the engraved caption in black over yellow blackground as per technicl requirement. and derection of Engineer -In - charge. the pillar shall be embeded in earth by 1.5 ft ( for LT UG)

Carriage of materials such as Cable.AAC, AAAC, ACSR, G.l.Wire,Cross-Arm,Stay set.Insulators etc., by Mechanical Transport from the Electrical SubDivisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required, upto the lead of 25KM & 50KM.a) Upto the lead range 25KM

Carriage of 9.0 mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required a) Upto the lead range 25 KM

Carriage of 11/0.430, 3-Phase 315KVA by Mechanical Transport from the Site /Store/Worshop to working site Vis-a-vis including loading, unloading and placing on base, as required, a) Upto the lead range 25KM

TAPAN CHOUDHURY

Curiosity Constructions Pvt Ltd

M/S SAJAL DAS