retaining wall at ananthalwar thota, Tirumala

Demolishing and disposal of unserviceable materials within 100 metres lead . Unreinforced cement concrete up to 15cm thickness

Demolishing including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead . -do-Brick work

Dismantling, clearing away and carefully stacking materials useful for re-use, -do- flat stones in roof or floors including lifting.

Dismantling, clearing away and carefully stacking materials useful for re-use, stone masonry in cement mortar.

Demolishing including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead . -do-R.C.C Work

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental ,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work. Ordinary soil-Manual means up to 3m depth

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete.

Cement Concrete (1:2.5:5)-Grade M15 using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

VCC Vertical walls of plane surface (rate is for both sides centering) including open drains

Construction of Brick Masonry using in CM (1:6) well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions.

- do- in C.M( 1:5) 12 mm thick .

- do- in C.M( 1:5) 20 mm thick

Flooring with granite slabs of Telephone black granite 18 to 20 mm thick up to 8'-00 (2.43 M) set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the slabs against supply)

Flooring with granite slabs of Galaxy granite 18 to 20mm thick up to 8'00" (2.43M) (premium quality) set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the slabs against supply)

Flooring the following granite salbs set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work.

Leather finish camel brown granite 16 to 18 mm thick slabs up to 8'-0" (2.43m)

Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same.

Flooring with cement concrete floor tiles of 25 mm thick confirming to IS 1380-12013/IS 1237-2012 of following sizes set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300 X 300 x 25mm of any shades.

Supply and fixing of stain less steel SS 304 grade Tubes, sections, Plates, sheets & pipes of all sizes & diametres etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing, polishing, lacquer finishing, to present seamless finishing etc., complete as directed during execution.

Hire charges for engaging core drilling machine for making holes in floor including fuel and labour charges as directed during execution.

CUT STONE FLOORING 4" THICK : Supply and dressing with hard granite stone slabs with Three line dressing for flooring from Mulbhagal quarry including cost and conveyance etc., complete with the following specifications. a) The size of the stone slab should not be less than 0.61mx 0.45m (2'-0"x1'-6"). b) The thickness of the stone slabs should not be less than 100mm ( 4") in all sides. c) The top of the slab should be dressed with the following dressings properly. d) All the sides of the slabs should be dressed with following dressing to a depth of 40mm (11/2") from top surface to suit proper alignment and jointing with side slabs. e) The slabs should be laid horizontally and jointed properly to alignment over sand bed (excluding cost of sand bed).cement mortar bed. f) The joint of the slab should not be more than 6mm (1/4" thick). g) The slabs should be jointed with C.M(1:3) and the mortar should not come over the slab for the above item the rate is including cost and conveyance of all materials to site of work including necessary labour charges, dressing, laying, jointing but excluding cost of sand for bed, the bed will be paid under relevant item. (Cement mortar of 0.005 Cum/ Sqm should be used for joints).

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint grade-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supplying and fixing in position M.S tubes & pipes of all diameters as per ISI 1161 of approved size design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the same with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Ornamental brick work with 2nd class bricks in Cm (1:5) (using brick bats and madras terrace bricks), including cost and conveyance of all materials, labour charges, curing, lift charges etc., complete.

Special class Ornamental plastering 1" to 11/4" thick with base plastering 1/2" to 3/4" in CM (1:3) and top finishing 1/2" thick with CM (1:2) to bring the required oramentation including fine renderring with neat cement including cost and conveyance of all materials, labour charges, all incidental and operational charges, curing,etc., complete finished item of work inside for external surfaces as per approved drawings and as directed during execution including preparation and fixing of precast pillars wherever necessary (sand of fine varity is to be used).

First Class Ornamental plastering 1" to 1 1/4" thick with base plastering 1/2" to 3/4" in C.M (1:3) and top finishing 1/2" thick with C.M(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all materails, labour charges, all incidental & operational charges, curing etc., complete. To the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, whereever necessary.

Providing cement vigrahams cement, fine sand, iron bars mesh, brick bats, flat tile pieces etc, complete including cost and conveyance of all materials labour charges etc, complete

-do- 2'- 0" to 4'- 0" height

Two hands sitting posture

Four hands sitting posture

Two hands Standing posture

Four hands standing posture

Vahanams (Nandi Simham , Elephanta ete,.)

Painting to new walls with Acrylic Exterior Emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all opertional, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Supply and fixing of Scaffolding to oranamental and sculpture works including cost and conveyance of all materials such as casurina poles, bamboos, bamboos mats and coir rope etc., including labour charges complete. After completion of work scaffolding should be removed carefully as directed during exectuion etc., complete.

up to 20'-0" feet

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC)etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but incuding cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Note : The design mix shall be got designed by furnishing the information required as per clause 19.1.1 &19.1.2 of IS 456-2000 by the contractor at his own cost and get approved from the competent authority before execution. The cement considered for above M25 grade concrete is 380 kgs/cu.m and the rate is arrived accordingly in the estimate. After the mix is designed and approved, if there is any variation in the quantity of cement, over the cement content adopted in the estimate, the same will be considered and paid/recovered at estimate rate + T.P ( Either increase or decrease in quantity adopted in the estimate). Payment will not be made for variation in the quantity of other materials such as coarse & Fine aggregates.

For Columns in First floor

For Roof beams in First floor

RCC M- 20 Design mix using 20mm HBG crushed metal 0.480 cu.m , 10mm HBG crushed metal 0.320 cu.m , sand 0.400 cu.m and cement 350 kgs with water cement ratio of 0.53 (185.5 Lit per cu.m of CC ) etc. horizontal plain sunshades or lofts projecting from the face of the wall 65mm average thickness,80mm thick at the face of the wall and 50mm thick at the free end and cast monolithically with the lintels or tailed to the full thickness of the wall where there are no lintels using 20mm size graded machine crushed hard granite metal (coarse aggregate) from any source conforming to the relevant ISI standards including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing , etc.,complete, but excluding cost of centering charges and excluding cost of steel and its fabrication charges for finished item of work.

RCC M20 Design mix ornamental cove cornice or lofts using 20 mm graded HBG crushed metal - do - 0.60 m width (0.76 m curved width)

do in first floor

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of specified grade (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered). -do- below 36 mm Fe 500/Fe-500D/Fe550 Note: Unless otherwise fabrication and placement of steel, no pre-pament shall be made against the supply of steel reinforcement

Rupees Sixty Lakh(s) Twenty Five Thousand Seven Hundred Eight And Paise Forty Six Only