Completion of balance works like plastering, Vitrified tiles, Ceramic tiles, Doors, windows, Water Supply, Electrification, Paintings and Miscellaneous items etc., to Night Shelter building at 1st Floor of Community Hall in Andhra Prabha Colony in 58th Division

Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor, watering, curing etc., complete.

Plastering for walls in CM (1:4) 20mm thick including cost and conveyance of all materials, labour charges for mixing of mortor, watering, curing etc., complete.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete for finished item of work, but including the cost of conveyance of all materials.(600x600 of 8mm to10 mm thick )

Flooring with ceramic tiles, set over base coat of cement mortar (1:8) 7.3 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges for finished item of work, but including the cost of conveyance of all materials.

Walling with glazed red or white full body ceramic wall tiles of size 300 x 450mm / 320mm x 400mm and thickness 6 mm 1st quality, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete for finished item of work, but including the cost of conveyance of all materials.

Collection and Supply of Dust for filling including cost and conveyance charges, spreading, sectioning etc., complete.

Providing concrete for plain concrete (M10) using 220 Kgs Cement, 40mm nominal size hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH.

Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS.

Painting 2 Coats with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS. (For Internal walls)

Painting 2 Coats with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS. (For External walls)

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes of 6kg/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. (6Kgs/cm2) For 110mm dia

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes of 6kg/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. (6Kgs/cm2) For 160mm dia

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. (BMT-N.83A) For Toilet Door Frames

Providing and fixing 28-30mm thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3mm top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame (BMT-N.92) For Toilet doors

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg), G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc., Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc., After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single/double glass panes, wire mesh and silicon sealent. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x 44mm & sash 32 x 60mm both having wall thickness of 1.9 ± 0.2mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). (BMT-P.80B) For Windows

Providing and fixing door frames fabricated from sections made of galvanized steel powder coated (base steel as per IS 513, galvanised as per IS277 with zinc of 120 grams / square metre), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25 mm, size of door frame section is of 105 x 60 mm with a rebate of 38 mm to accommodate 35 mm thick door shutter, with groove to insert gasket in the frame section, frame section filled with polyurethane foam, cut to length, and joined by way of welding, each frame provided with: a) 2mm thick MS powder coated butt hinges of 100 mm long – 3 Nos. for single shutter, 6 Nos. for double shutter. b) CRCA electroplates stiffeners of 6 Nos. – 3 in each vertical. c) 40 mm x 200 mm x 1.2 mm hold fasts screwed to stiffeners – 6 Nos. with split end tail. d) Nylon Aldrop Receiver – 1 No. for single shutter frame. e)Tie Rod – 1 No (BMT-N.38) For Door frames

Providing and fixing 35mm thick BRAND FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different panel and / or prelam colours on one side after routing the moulded design on flush door and 2mm prelam Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping etc. complete as per direction of Engineer- in-Charge, manufacture specification and drawing (BMT-N.06) For Toilet Door frames

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007). For 28.60mm OD Pipe (SDR 13.50)

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007). For 22.20mm OD Pipe (SDR 13.50)

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap: 630mm x 450mm. (BMW-D.05)

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC withall internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15mm angle stop cock 450mm long PVC inter connection pipe wallflanges all of approved make etc. complete for finished item of work in all respects: White Colour (BMW-D.18)

Supplying & fixing 15mm bib tap with flange Chromium plated .(BMW-I.140)

Supply&fixing pillarcock Jaquar make Queen series with 7years warranty:Chrome plated (BMW-i.143)

Supply & Fixing of make chrome plated Metro pole flush valve concealed type with cover plate 40mm size with 7 years warranty. (BMW-I.198)

Supply & fixing bib cock cum health faucet with 1m long flexible tube and wall hook of Jaquar make queen series with 7 years warranty Chrome plated (BMW-I.141)

Labour Charges for fixing of CPVC Pipe lines and drainage facilities at proper gradient including fixing with nails and all labour charges etc., complete as directed by the departmental authorities. (LAB-00036) For Plumbers

Constructing 457.2mm x 457.2mm (1'6"x1'6") brick in CM (1:6) prop. Masonry Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg.(BMW-B.06)

Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock (BMW-D.24)

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks. (BMW-G.01)

Supply and fixing of 20mm dia 1.40mm to 1.55mm thick surface pvc pipe / casing and caping ISI with all accessories fixing at chromium plated metalic saddles and decolam board for swutches for light fan and separate plug points including all labour charges etc.,complete as directed by the departmental authorities.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose and 12 Module Horizontal/Vertical Cover Frame of recommended brands as per category I covering to switches/sockets control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings with Modular Accessories (apsd-3.1.1)

Supply and Fixing of 18W/20W 1200mm length LED batten light with extruded Aluminium housing and poly corbonate cover , input voltage AC 220-260 Volts with PF >0.9, surge protection 2 KV, THD <15 % with inbuilt driver and frosted cover CCT : 3000K -5700 K, minimum CRI >70, etc complete of make PHILLIPS, LUMILEDS/ OSRAM/ SAMSUNG (sd)

Supply and fixing of 48" (1200mm) Sweep decorative Ceiling Fan, with double ball bearings with all accessories without Regulator including all labour charges for fixing, wiring connections etc., complete as directed by the departmental authorities of Make: Crompton (HS Decora/Aura) / Bajaj Regal Star / Havells Festiva / Orient Ornamental Shine/Halonix(Halo) / Polycab(Elanza) / G.M. (G-Storm). (MAT-05508) (Elec-5.1.1)

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.(apsd)

Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on decolam sheet covered board including earth connection and all labour charges etc., complete on wall. (apsd)

Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply of (8 +24) 8 Way TPN DB Horizontal with IP 43, 24 No protection suitable for installation of SP outgoing MCBs and for 1 No 4 pole, MCB/Isolator incomer along with provision for 1 No of 4 Pole RCCB/ELCB etc., complete as per IS 8623; IS 13032; IEC 61439-3. Makes: As per list of recommended brands as category I.(ELEC-2.13.4E)

Supply of 2 Module Modular type Electronic step type Fan Regulator Makes: Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Ducor /L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA).MAT-02817

Providing Three phase service meter connection Charges to APSPDCL including wiring certificate labour charges fixing of peeta board, fuse uinits, wooden box, neutral link and necessary metarials etc., complete as directed by the departmental authorities.