Provn of certain Minor and Revenue works under GE Dehradun

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n' exc. 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting outsoft/loose soil complete all as specified and directed

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Surface dressing n exc 15 cm deep in any type of soil complete all as specified and directed

Material and labour for broken stone hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and levelled in layer not exceeding 15cm thick watered and rammed to a true surface complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed.

Material and labour for PCC 1:5:10 type E-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete, sub base of floor etc complete all as specified and directed.

Material and labour for 60 mm thick pre polished rubber moulded coloured (red/yellow) machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed

Material and labour for sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

Material and labour for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and smooth (without using extra cement) complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in soil complete all as specified and directed.

Removing surplus excavated material (soil) to distance not exc. 50 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point complete all as specified and directed.

Removing surplus excavated material (soil) to distance exceeding. 50 mtr but not exceeding 250 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point complete all as specified and directed.

Supply and fixing of mild steel, rolled sections (channel, angle or tee sections) fixed independently, without connecting plates, trusses etc any type framing including purlins and rafters etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) etc conforming to Fe-410(Gde 250), complete all as specified and as directed.

Supply and fixing of mild steel, rolled sections joist, channel, angle sections fixed independently, without connecting plates etc, confirming to Fe 410-W (Gde E-250 Quality A) complete all as specified and directed

Supply and fixing of mild steel, rolled sections, framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed.

Supply and fixing of steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all directed

Description all as ser item No 19 above but 5mm dia and over upto and inclluding 10mm dia in stirrups, spacers and binders etc complete all as specified and directed.

Material and labour for 65 mm thick vibromatic reinforced cement concrete 1:1:2 (using 20mm graded stone aggregate) with 2mm thick mild steel CR sheet around painted with 2 coats of bituminous paint, as in man hole cover slabs finish fair even and smooth without using extra cement (Top surface will be chequred finish) including necessary form work, 100 mm long handle of 12mm dia round bar counter sunk by 25 mm welded to reinforcement complete all as specified and directed. (Reinforcement shall be measured and paid saperately)

Material and labour for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested suitable for 150mm bore of pipe complete all as specified and directed.

Material and labour for 300mm bore reinforced concrete pipes, class NP-3 laid and jointed complete with collars complete all as specified and directed.

Material and labour for construction of Soakage wells exc, in ordinary soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/RR masonry/Filling with brick bats, complete of size 1.2 M dia X 3.0 M deep complete all as specified and shown on drawing No CEBZ TD Drawing No. 309 Sh 1 to 4/4 complete all as specified and directed. (Drawings are available with Engr-in-Charge).

Material and labour for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum and getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering & removing surplus soil to a distance n.exc 50m & making good surface in soft/loose soil complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed.

Supply and fixing of rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 complete all as specified and directed

Supply and fixing of rolled mild steel in roof trusses (framed), trussed rafter/purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed in position, conforming to Fe-410-W (Gde 250), quality 'A' complete all as specified and directed.

Supply and fixing for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

Material and labour for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in foundations, footings, foundation beams; plinth beams; bases for columns, etc.; and mass concrete complete all as specified and directed.

Material and labour for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in columns, pillars, piers, post and strut etc complete all as specified and directed.

Material and labour for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in beams, cantilivers, beressummers, lintels over 1.5m span complete all as specified and directed

Material and labour for RCC type B1 1:2:4 (using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc. complete all as specified and directed

Material and labour for formwork to sides of concrete , foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for rough finished surface complete all as specified and directed.

Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc.for fair finished surface complete all as specified and directed.

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantiliver shelves etc.for fair finished complete all as specified and directed.

Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings , opening in concrete walls, floors and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, hozontal or sloping and similar work exc 5cm but n exc 10cm etc.for fair finished surface complete all as specified and directed.

Material and labour for formwork to flat fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landings , shelf and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

Material and labour for 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note:WPC shall be measure and paid separatelly.

Supply only integral water proofing compound complete all as specified and directed

Material and labour for 10 mm thick ceiling plaster in CM (1:3) on fair faces of concrete surfaces finished even and smooth without using extra cement including fixig of wire mesh to receive plaster where required complete all as specified and ditected.

Material and labour for preparation of new plasterd surface of walls including corners and applying two coats of oil bound distemper over a coat of wall care putty not less than 1mm thick etc complete all as specified and directed.

Supply and fixing of factory made single extruded WPC (Wood polymer Composite) Solid moulded Flush Door Shutter of 30 mm size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives (max toxicity index of 12 for 100 gms) having min density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) &900 N (Edge) Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/ Borer proof. Water/ Moisture Proof, Fire retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - in- Charge, Materia test certificate and authentication should be compulsory provided by the manufacturing company.

Supply and fixing of butt hinges 100 mm size medium weight stainless steel and fixed complete all as specified and as directed

Supply and fixing of stainless steel tower bolt 150 mm long of extruded section etc complete all as specified and as directed.

Supply and fixing of stainless steel tower bolt 200 mm long of extruded section etc complete all as specified and as directed.

Supply and fixing of stainless steel, sliding door bolt size 300 mm with hasp, staple (bolt ype) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fixing of 150 mm long stainless steel handle, cast type, anodised etc complete all as specified and as directed.

Supply and fix of powder coated aluminium partition (Fixed) made out of aluminium powder coated section 44 x 44 x 1 mm including 4 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc, complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2, (20 mm graded stone aggregate)as plinth protection and finishing even and smooth without using extra cement incl making joints 12 mm wide of full depth of PCC at every 3 meters and at every change in direction and filling the same with and including sealing compund grade 'A' and necessary formwork complete all as specified and directed.

Supply and fixing of stainless steel, sliding door bolt size 250 mm with hasp, staple (bolt ype) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Material and labour for non skid/mat finish ceramic coloured tiles of size 400 mm x 400 mm and 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour for 15-18 mm thick granite, of any type, table rubbed and polished in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar 15mm thick (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding complete all as specified and directed.

Supplying, fixing, jointing and testing 20mm bore galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket, reducer etc fixed to walls and ceilings or laid in floors etc complete all as specified and directed.

Supplying, fixing, jointing and testing 15mm bore galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket, reducer etc fixed to walls and ceilings or laid in floors etc complete all as specified and directed.

Material and labour for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and ditected.

Supply and fixing of PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls complete all as specified and directed.

Supply and fixing of PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls complete all as specified and directed.

Supply and fixing PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed.

Supply and fixing PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed.

Supply and fixing of PVC (SWR) junction single Tee equal or unequal 110 mm dia complete all as specified and directed.

Supply and fixing of PVC (SWR) junction single Tee equal or unequal 75 mm dia complete all as specified and directed.

Supply and fixing of vitreous china wash down water closet pan (Padestal pattern) white incl plastic water closet seat covers white closed pattern with flat bottom with mild steel chromium plated hinging device complete all as specified and directed.

Supply and fixing of vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed on and including cast iron cantilever bracket, incl 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting, including cutting of granite in fixed area etc. complete all as specified and directed.

Supply and fixing of vitreous china wash hand basin white, of size 550mmx400mm fixed on and including cast iron cantilever bracket, incl 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting, including cutting of granite in fixed area etc. complete all as specified and directed.

Supply and fixing of Urinal flat back of size 360 x 330 x 740 mm with chromium plated bottle trap fixed to wall, with grating and union for discharge pipe, including providing &fixing plugs bedding urinal against wall in cement mortor 1:2 securing urinal to plug with and including 60 mm long brass screws etc pointing around urinal back in cement, complete all as specified and directed.

Supply and fixing 10 ltr capacity PVC low level flushing cistern valveless, syphonic action type, white, with inlet, ball valve, float and handle including brackets and fixed complete all as specified and directed.

Supply and fixing of chromium plated brass toilet paper holder with flap complete all as specified and directed.

Supply and fixing of PVC jet spray for EWC with 1 mtr long PVC pipe with fittings complete all as specified and directed.

Supply and fixing of CP health faucet suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and fixing of fancy type 5.50mm thick looking mirror with PVC moulding 40mm wide all around with back 5mm thick PVC board of size 450x600x5mm thick as approved complete all as specified and directed..

Supply and fixing of CP brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legs & flanges complete all as specified and directed.

Supply and fixing of 15mm dia brass chromium plated centre hole wash basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed

Supply and fixing of 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixing of stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

Supply and fixing of 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed.

Supply and fixing of fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

Supply and fixing of glass shelf assembly consisting of 5mm thick toughened glass with CP railing and brass brackets complete all as specified and directed.

Supply and fixing of PVC (SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed.

Supply and fixing of PVC waste pipe not less than 60 cm long with PVC coupler for kitchen sink , WHB , Urinal etc complete all as specified and directed.

Supply and fixing of CP steel grating round with steel frame with hinge 100mm dia all as sample approved complete all as specified and directed. .

Supply and fixing of rotational moulded polyethylene water storage tanks capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete all as specified and directed.

Supply and fixing of rotational moulded polyethylene water storage tanks capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete all as specified and directed.

Supply and fixing of rotational moulded polyethylene water storage tanks capacity of tank 5000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position with locking arrangement including over flow pipe, air lock pipe, brass valve 25 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete all as specified and directed.

Supply and fixing of PVC connection 15mm size with PTMT nuts, of 450 mm to 600mm long complete all as specified and ditected.

Supply and fixing of 15mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Supply and fix factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Killogram/Cubic meter from ISO certified company door should be water proof, teRunning meterite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed

Supply and fix factory made 100 % solid wood plastic composite (WPC) door frame 100x50 mm made from wood plastic composite (single extruded process) material with density 780 Killogram/Cubic meter from ISO certified company door should be water proof, teRunning meterite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed

Supply and fixing 30 mm thick WPC factory made 100% solid flush designer door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed.

Supply and fixing of vitreous china half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs withand including 60mm long brass screws, pointing around urinal back in cement; fixing automaticflushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive offixing supply pipe to flushing cistern, trap and waste pipe)complete all as specified and as directed.

Supply and fixing of urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)complete all as specified and as directed.

Supply and fixing of fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

One light/fan/exhaust/bell point, controlled by one way switch, complete all as specified and directed.

One three pin 5 Amp socket on independent board, complete all as specified and directed.

One three pin 5 Amp socket on same board with other switches, complete all as specified and directed.

Description all as per Item No 102.00 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed.

One light/fan/exhaust/bell point, controlled by one way switch, complete all as specified and directed.

One three pin 5 Amp socket on independent board, complete all as specified and directed.

One three pin 5 Amp socket on same board with other switches, complete all as specified and directed.

Description all as per Item No 103.00 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed.

Supply and fix modular switch single pole one way, one module, 230 Volts 6 Amp complete all as specified and directed.

Supply and fix modular switch single pole one way, one module, 230 Volts 16 Amp complete all as specified and directed.

Supply and fix modular socket 6 Amps, 2/3 pin combined, two module, 230 Volts complete all as specified and directed.

Supply and fix modular socket 6/16 Amps, 2/3 pin combined, two module, 230 Volts, complete all as specified and directed.

Supply and fix ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fix switch piano flush, button type 5 Amp SP 250V AC complete all as specified and directed.

Supply and fix switch piano flush button type 15 Amp SP 250V AC complete all as specified and directed.

Supply and fix socket outlet 2-in-1, 5 Pin 5 Amps 250V AC complete all as specified and directed.

Supply and fix socket outlet 2-in1,3 pin 5 and 15 Amp flush type 250V AC complete all as specified and directed.

Supply and fixing batten holder ISI marked mounted on wall including 09 watt LED bulb complete all as specified and directed.

Supply and fix energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix energy efficient LED tube light fittings 10 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED building security light fitting 35 Watt 230 Volts, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, nuts & washers of min 1.2 mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified and directed.

Supply and fixing of heavy duty exhaust fan metallic body 300 mm sweep with and including louvers, electric, single phase 1400RPM, 240 volt 50 Hz complete and making suitable hole in existing cement concrete / brick walls built in cement mortar 1:4 and removing unserviceable/loose/broken debris upto 500m distance and making good the disturbed surfaces to match with the existing surface including plastering as required & finishes including grouting four Nos rag bolts, nuts & washers and connecting with 3 core copper flexible cable of size 23/0.0076 including testing & commissioning after installation at site complete all as specified and directed.

Supply, installation and testing of geyser storage type of 25 litre capacity AC, SP, 230 volt, 50 Hz, 5 star rated, high efiiciency heating element, autocut thermostate, pressure release safety system, fire retardent cable with 3 pin plug top, glass lined tank with white colour complete including fixing accessories like fasteners, nuts, washers, plug top, suitable size 3 core copper flexible cable of suitable length etc complete all as specified and directed

Supply and fixing of sheet metal enclosure SP with two pin and earth plug and socket with one single pole, MCB 20 Amps, 'B' curve, 240 volts including making connections with suitable size of lugs/thimbles/glands complete all as specified and directed.

Supply and fix distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 200 Amps rating of IP 43 protection including making connections with suitable size of lugs/thimbles/glands complete all as specified and directed. Note:- DB and MCB shall be of same make.

Supply and fix distribution board SPN 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection including making connections with suitable size of lugs/thimbles/glands complete all as specified and directed. Note:- DB and MCB shall be of same make.

Supply and fix MCB single pole and neutral 240 volt 10 KA 40 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fix MCB single pole 240 volt 10 KA 6- 32 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Material and labour for submain wiring using approved colour coding as per IS, with 3 runs(1 run for Phase+1 run for Neutral &1 run for Earth) of 2.5 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed wiring with PVC conduit pipe of medium duty not less than 20 mm dia including necessary steel conduit specials and connecting with suitable size thimble, and making good surface of disturbed wall/ceiling/floor as match with existing complete all as specified and directed. Note:-3 runs of 2.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

Material and labour for submain wiring using approved colour coding as per IS, with 3 runs(1 run for Phase+1 run for Neutral &1 run for Earth) of 4 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed wiring with PVC conduit pipe of medium duty not less than 20 mm dia including necessary steel conduit specials and connecting with suitable size thimble, and making good surface of disturbed wall/ceiling/floor as match with existing complete all as specified and directed. Note:-3 runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00mm dia by means of bolts, nuts, Check nuts and washers of galvanised iron and thimbles and other end of the earth wire all as shown in electrical plate No 3 of MES Schedule Part-I (2009) connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board and protected by galvanized iron pipe medium 15 mm bore, and water pipe 20 mm bore GI light grade with funnel and wire mesh, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) 50mm thick cover, reinforced with 8mm dia deformed or TMT bars 100mm C/C both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.

Material and labour for laying, jointing and testing of underground XLPE insulated & PVC sheathed, armoured heavy duty multistranded electric cable with aluminium conductor, 16Sqmm, 2 core, 1100 volts grade in trenches/ ducts/ along poles/ through pipe/ under road/ PCC etc and connecting with new aluminium lugs etc complete all as specified and directed. Notes: (a) Excavation, returning, removal, sand cushioning, cable protection covers, GI protection pipe etc shall be measured and paid separately. (b) Any damage done during cable excavation to the existing UG infra like UG pipelines, UG electric cables, OFC etc shall be repaired by the contractor at their own expenses. (c) Cost of T&P required for handling/ laying of cable is deemed to be included in the rate quoted by the contractor.

Matrial and labour for sand cushioning to under ground cable, 8 cms thick before laying the cable and 15 cms thick after laying & stretching the cable in trenches, including hand punning and consolidating, complete all as specified and directed. Note:- For payment purpose punned thickness shall be measured.

Matrial and labour bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified and directed.

NOTE:- Amount of credit of Rs. Nil for retrieved materials is mentioned in Schedule of Credit Page No Nil of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/s Pradeep Kumar (BID ID -3495883)

IMPERIAL ENGINEERS (BID ID -3490445)

SARASWATI CONSTRUCTION CO (BID ID -3495746)

Pragati Enterprises (BID ID -3496366)

M/s Anil Kumar (BID ID -3490448)